Wbadminuiinbuilttracing со следующей ошибкой 0xc0000035 - Решение и исправление самых разных ошибок на TopOshibok.ru

Remove From My Forums

Question
Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
```
- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2 
```
What causes the error? What do I need to do to avoid it?

Answers

- Marked as answer by
  
  Thursday, December 9, 2010 7:30 PM

Источник

Remove From My Forums

Вопрос

Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2

What causes the error? What do I need to do to avoid it?

Ответы

- Помечено в качестве ответа
  
  9 декабря 2010 г. 19:30

Remove From My Forums

Question
Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
```
- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2 
```
What causes the error? What do I need to do to avoid it?

Answers

- Marked as answer by
  
  Thursday, December 9, 2010 7:30 PM

Remove From My Forums

Question
Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
```
- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2 
```
What causes the error? What do I need to do to avoid it?

Answers

- Marked as answer by
  
  Thursday, December 9, 2010 7:30 PM

We had a blip on our cluster today. I am trying to figure out if it is a more serious issue or not: Here are the logs.

1/18/2011 1:16:16 PM

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

1/18/2011 1:48:05 PM

Failover Cluster Manager could not contact node ‘HOPWVFISH02.eagleenergypartners.local’.

System.ApplicationException: Failed to query the event log. —> System.ComponentModel.Win32Exception: The specified channel could not be found. Check channel configuration

— End of inner exception stack trace —

Server stack trace:

at MS.Internal.ServerClusters.EventLogQuery.EventQuery(EventSafeHandle session, String path, String query, UInt32 flags)

at MS.Internal.ServerClusters.EventLogQuery..ctor(EventLogSession session, String channel, String text)

at MS.Internal.ServerClusters.EventLogSession.CreateQuery(String channel, String text)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.<>c__DisplayClass5.<QueryWorker>b__1()

at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)

at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)

Exception rethrown at [0]:

at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)

at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.AsyncCallDelegate`1.EndInvoke(IAsyncResult result)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.ExecuteAsyncCall[T](AsyncCallDelegate`1 asyncCall)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.QueryWorker(Object a)

Если вы используете средство просмотра событий в Windows 11/10, то, возможно, в последнее время вы сталкивались с кодом ошибки 0xC0000035, который указывает непосредственно на ошибку отслеживания событий ядра. Конечно, это не новая ошибка, но для многих это первый раз, когда они сталкиваются с ней лицом к лицу.

Что такое ошибка 0xC0000035?

Код ошибки 0xC0000035 возвращается как «STATUS_OBJECT_NAME_COLLISION». Этот код ошибки был связан с обнаруженным идентичным идентификатором безопасности домена (SID). Более того, поскольку «регистратор событий заполнен» сеансом, «регистратор контекста кругового ядра» не запустился успешно.

В чем причина ошибки 0xC0000035 в Windows 11?

Это происходит, когда некоторые процессы не запускаются. Это могут быть сетевые или другие процессы. некоторые примеры: PerfDiag Logger, NetCfgTrace, Microsoft.Windows.Remediation, sensorframework и т. д.

Поскольку существует несколько способов вызвать ошибку 0xC0000035 на компьютере с Windows, в этой статье основное внимание будет уделено объяснению того, как выполнить работу несколькими из этих способов.

Измените раздел реестра Autologg
Отключите или удалите сторонний антивирус
Обновите Intel или другие сетевые драйверы
Выполнить сброс сети
Запустите сканирование DISM, чтобы восстановить образ системы

1]Мы предлагаем изменить ключ реестра Autologg.

Бывают случаи, когда этот код ошибки вообще не вызывает никаких проблем. Если вы понимаете, что это действительно так, то лучший шаг, который можно предпринять, — это вообще предотвратить его появление.

Сделайте это, открыв диалоговое окно «Выполнить». Нажмите клавишу Windows + R, затем введите Regedit и нажмите клавишу Enter. Сразу появится редактор реестра

В редакторе перейдите к следующему:

Компьютер HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control WMI Autologger EventLog-System {b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}

Как только вы окажетесь в нужном разделе, следующий шаг — перейти вправо от редактора реестра и не забудьте дважды щелкнуть ключ Enabled.

Теперь в параметре Edit DWORD (32-bit) Value измените Base на Hexadecimal, затем отредактируйте данные Value с любого текущего значения на 0. Нажмите OK, чтобы сохранить изменения.

После того, как вы выполнили эту задачу, вам нужно будет дважды щелкнуть EnableProperly, а затем изменить Base на Hexadecimal и установить значение Value равным 0. Наконец, нажмите OK, чтобы сохранить изменения.

Следующим шагом является перезагрузка компьютера и проверка, сохраняется ли ошибка 0xC0000035.

2]Отключите или удалите сторонний антивирус.

В некоторых случаях причиной ошибки 0xC0000035 в средстве просмотра событий может быть сторонний антивирус. Мы считаем, что вам нужно отключить антивирусную программу, а затем, надеюсь, перезагрузить компьютер, чтобы устранить ошибку.

Если это не сработает, скорее всего, вам может потребоваться полностью удалить утилиту. Чтобы выполнить эту работу в Windows 11, вам необходимо запустить приложение «Настройки», нажав клавишу Windows + I. Оттуда выберите «Приложения»> «Приложения и функции», затем прокрутите вниз, пока не увидите свою антивирусную программу в списке. .

3]Обновите Intel или другие сетевые драйверы.

Итак, есть несколько способов обновить Intel или другие сетевые драйверы на вашем компьютере с Windows 11.

Для начала откройте Настройки, нажав клавишу Windows + I. Оттуда выберите Центр обновления Windows снизу, затем нажмите кнопку «Обновить», чтобы операционная система проверила наличие новых обновлений.

Если какие-либо драйверы доступны, Windows 11 загрузит и установит их автоматически или запросит вашу помощь. Все это зависит от ваших конкретных настроек Центра обновления Windows.

4]Выполнить сброс сети

Еще один способ избавиться от кода ошибки 0xC0000035 — сбросить настройки сети. Это простая задача. Все, что вам нужно сделать, это прочитать Как сбросить сетевые адаптеры с помощью функции сброса сети в Windows 11.

5]Запустите сканирование DISM, чтобы восстановить образ системы.

Восстановление образа вашей системы — один из лучших способов исправить код ошибки 0xC0000035. Для этого необходимо сразу запустить DISM (управление развертыванием образов и обслуживанием). Чтобы узнать, как сканировать компьютерную систему с помощью DISM, мы предлагаем прочитать «Запуск DISM для восстановления образа системы Windows и хранилища компонентов Windows в Windows 11/10».

Читайте: Как найти и просмотреть файлы журнала BSOD в средстве просмотра событий Windows 10

Нужно ли включать DHCP если используется USB-модем?

Вообще не в тему всё остальное сейчас напишу. Собственно почему такой вопрос у меня возник. В винде (Win 7 ultimate x64) одна единственная ошибка от которой не могу избавится — это:

Имя журнала: Microsoft-Windows-Kernel-EventTracing/Admin

Источник: Microsoft-Windows-Kernel-EventTracing

Дата: 16.01.2011 21:38:27

Код события: 2

Категория задачи:Сеанс

Уровень: Ошибка

Ключевые слова:Сеанс

Пользователь: система

Компьютер: Banny61rus-ПК

Описание:

Не удалось запустить сеанс «Circular Kernel Context Logger» со следующей ошибкой: 0xC0000035

Xml события:

<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>

<Computer>Banny61rus-ПК</Computer>

</System>

<Data Name=»SessionName»>Circular Kernel Context Logger</Data>

</Data>

</EventData>

</Event>

на http://www.eventid.net варианты решения предложены:

Peter Addor

From EV100113, a discussion about this type of problem (with Error code 0xC0000035): «Some people mention this might have something to do with network card device driver. To troubleshoot the issue, test your machine in safe mode, if it works fine in the safe mode, please test in Clean Boot, you can refer to M929135.»

x 1

EventID.Net

Various error codes and sessions can be reported with this message:

— Session WbadminUIInBuiltTracing, Error code 0xC0000035 — From a support forum «This error event is HARMLESS and can be safely ignored. This seems to be an issue with the way inbox tracing (used to collect backup/restore traces) is enabled in Windows backup. It occurs if an inbox tracing session is already enabled and backup tries to start it again.»

— Session {4498f992-a958-48ff-8218-eaf88df21469}, Error code 0xC0000188

— Session Circular Kernel Context Logger, Error code 0xC0000035 — See EV100113.

— Session «», Error code 0xC000000D — See EV100114.

— Session ReadyBoot, Error code 0xC0000188 — Apparently one shouldn’t worry about this one, see M2001347.

— Session Homegroup Log, Error code 0xC0000035: See EV100115.

Anonymous

Session Homegroup Log, Error code 0xC0000035. From a support forum:

This fixed it for me

1. Found this article M293497

2. Then did the following (from a command line):

— ipconfig /Flushdns

— ipconfig /release /all

Make sure DCHP is enabled (well I had to), then you may have to reboot (on restart, it re-registered with DNS).

Мне подходит первое получается:

Peter Addor

Но вот эти манипуляции по M929135 (http://support.microsoft.com/kb/929135) ничем не помогли.

Но вот немного подходит с (http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/1ad12734-3cd2-4733-936d-9c4071ecdb63):

I am seeing the same Kernel-EventTracing Event 2, several times in a row, a second or less apart.

In my case, the text is:

Session «Circular Kernel Context Logger» has failed to start with the following error(s) 0xC0000035.

Same here. I don’t know if it’s related but I noticed this problem after examining why my notebook sometimes stubbornly refuses to go to sleep when the lid is closed. Running 7 64 bit ult.

Exact same errors but this fixed it for me (

There probably more to it and this may be just a workaround but its working since—no errors )

1 found this article http://support.microsoft.com/kb/293497

2 Then Did the folowing

(from cmd )

ipconfig /all — return (save results for next time—its microsoft)

ipconfig /Flushdns —return

ipconfig /release /all —return

quit

Make sure DCHP is enabled (well I had to), then you will have to reboot

—on restart, it re-registered with dns

Ive had no errors since thankfully. Im not very techy so hope the above makes sense. hopefully it might help somewhat.

Вот поэтому и хотел узнать насчёт DHCP/

А еще так и не решилась проблема http://homenet.beeline.ru/?showtopic=276619.

sircles

Avatar

Status: Moderator
Total Posts: 183

We are seeing the following on a Windows 2008 R2 Exchange 2007 box:

Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          27/06/2018 10:26:51
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          domainusername
Computer:      %COMPUTERNAME%.domain.suffix
Description:
Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>
  <System>
    <Provider Name=»Microsoft-Windows-Kernel-EventTracing» Guid=»{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}» />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime=»2018-06-27T09:26:51.426647100Z» />
    <EventRecordID>63</EventRecordID>
    <Correlation />
    <Execution ProcessID=»9300″ ThreadID=»9760″ />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>%COMPUTERNAME%.domain.suffix</Computer>
    <Security UserID=»S-1-5-21-643322192-3791837119-3815354684-500″ />
  </System>
  <EventData>
    <Data Name=»SessionName»>WbadminUIInBuiltTracing</Data>
    <Data Name=»FileName»>
    </Data>
    <Data Name=»ErrorCode»>3221225525</Data>
    <Data Name=»LoggingMode»>2</Data>
  </EventData>
</Event>

Does anyone know what action we need to take?

sircles

Avatar

Status: Moderator
Total Posts: 183

This appeared to be the mailbox assistant service having crashed that caused this error and not a harmless error as some of the internet was leading us to believe.

We restarted the service and the error disappeared.

Источник

Remove From My Forums

Вопрос
Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
```
- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2 
```
What causes the error? What do I need to do to avoid it?

Ответы

- Помечено в качестве ответа
  
  9 декабря 2010 г. 19:30

Remove From My Forums

Question

I’m getting the following error:

Log Name:   Microsoft-Windows-Kernel-EventTracing/Admin
Source:    Microsoft-Windows-Kernel-EventTracing
Date:     5/17/2010 11:04:48 AM
Event ID:   2
Task Category: Session
Level:     Error
Keywords:   Session
User:     ****
Computer:   ****
Description:
Session "WbadminInBuiltTracing" failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
 <System>
  <Provider Name="Microsoft-Windows-Kernel-EventTracing" Guid="{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}" />
  <EventID>2</EventID>
  <Version>0</Version>
  <Level>2</Level>
  <Task>2</Task>
  <Opcode>12</Opcode>
  <Keywords>0x8000000000000010</Keywords>
  <TimeCreated SystemTime="2010-05-17T18:04:48.898886000Z" />
  <EventRecordID>45</EventRecordID>
  <Correlation />
  <Execution ProcessID="4816" ThreadID="2800" />
  <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
  <Computer>****</Computer>
  <Security UserID="****" />
 </System>
 <EventData>
  <Data Name="SessionName">WbadminInBuiltTracing</Data>
  <Data Name="FileName">
  </Data>
  <Data Name="ErrorCode">3221225525</Data>
  <Data Name="LoggingMode">2</Data>
 </EventData>
</Event>

Does anyone know what this is or how to prevent it from
occurring?

I’m running Windows Server 2008 R2.

Thanks much,
James

Answers

Hello,
This error event is HARMLESS and can be safely ignored. This seems to be an issue with the way inbox tracing (used to collect backup/restore traces) is enabled in Windows backup. It occurs if an inbox tracing session is already enabled and backup
tries to start it again.

We will look into fixing the error event generated in future releases.

Thanks,
Lokesh [MSFT]
- Edited by
  
  Thursday, June 10, 2010 8:08 AM
  minor edit
- Marked as answer by
  James C. Papp
  Thursday, June 10, 2010 11:04 PM
- Unmarked as answer by
  James C. Papp
  Thursday, June 10, 2010 11:07 PM
- Marked as answer by
  James C. Papp
  Thursday, June 10, 2010 11:14 PM

We had a blip on our cluster today. I am trying to figure out if it is a more serious issue or not: Here are the logs.

1/18/2011 1:16:16 PM

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

1/18/2011 1:48:05 PM

Failover Cluster Manager could not contact node ‘HOPWVFISH02.eagleenergypartners.local’.

System.ApplicationException: Failed to query the event log. —> System.ComponentModel.Win32Exception: The specified channel could not be found. Check channel configuration

— End of inner exception stack trace —

Server stack trace:

at MS.Internal.ServerClusters.EventLogQuery.EventQuery(EventSafeHandle session, String path, String query, UInt32 flags)

at MS.Internal.ServerClusters.EventLogQuery..ctor(EventLogSession session, String channel, String text)

at MS.Internal.ServerClusters.EventLogSession.CreateQuery(String channel, String text)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.<>c__DisplayClass5.<QueryWorker>b__1()

at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)

at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)

Exception rethrown at [0]:

at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)

at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.AsyncCallDelegate`1.EndInvoke(IAsyncResult result)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.ExecuteAsyncCall[T](AsyncCallDelegate`1 asyncCall)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.QueryWorker(Object a)

Remove From My Forums

Вопрос

Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2

What causes the error? What do I need to do to avoid it?

Ответы

- Помечено в качестве ответа
  9 декабря 2010 г. 19:30

Remove From My Forums

Question
Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035
```
- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2 
```
What causes the error? What do I need to do to avoid it?

Answers

- Marked as answer by
  Thursday, December 9, 2010 7:30 PM

Remove From My Forums

Question

Windows Server 2008 R2 Standard.

I open the “Windows Server Backup” node in the Server Manager and see the error message in the system log after that.

Sourece: Kernel-EventTracing

EventID: 2

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

- System 

 - Provider 

  [ Name] Microsoft-Windows-Kernel-EventTracing 
  [ Guid] {B675EC37-BDB6-4648-BC92-F3FDC74D3CA2} 
 
  EventID 2 
 
  Version 0 
 
  Level 2 
 
  Task 2 
 
  Opcode 12 
 
  Keywords 0x8000000000000010 
 
 - TimeCreated 

  [ SystemTime] 2010-12-01T11:17:19.937490400Z 
 
  EventRecordID 17 
 
  Correlation 
 
 - Execution 

  [ ProcessID] 3472 
  [ ThreadID] 3100 
 
  Channel Microsoft-Windows-Kernel-EventTracing/Admin 
 
  Computer LODGER.aqa.com.ru 
 
 - Security 

  [ UserID] S-1-5-21-1644491937-706699826-1417001333-3605 
 

- EventData 

 SessionName WbadminUIInBuiltTracing 
 FileName 
 ErrorCode 3221225525 
 LoggingMode 2

What causes the error? What do I need to do to avoid it?

Answers

- Marked as answer by
  Thursday, December 9, 2010 7:30 PM

We had a blip on our cluster today. I am trying to figure out if it is a more serious issue or not: Here are the logs.

1/18/2011 1:16:16 PM

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

1/18/2011 1:48:05 PM

Failover Cluster Manager could not contact node ‘HOPWVFISH02.eagleenergypartners.local’.

System.ApplicationException: Failed to query the event log. —> System.ComponentModel.Win32Exception: The specified channel could not be found. Check channel configuration

— End of inner exception stack trace —

Server stack trace:

at MS.Internal.ServerClusters.EventLogQuery.EventQuery(EventSafeHandle session, String path, String query, UInt32 flags)

at MS.Internal.ServerClusters.EventLogQuery..ctor(EventLogSession session, String channel, String text)

at MS.Internal.ServerClusters.EventLogSession.CreateQuery(String channel, String text)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.<>c__DisplayClass5.<QueryWorker>b__1()

at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)

at System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)

Exception rethrown at [0]:

at System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)

at System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.AsyncCallDelegate`1.EndInvoke(IAsyncResult result)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.ExecuteAsyncCall[T](AsyncCallDelegate`1 asyncCall)

at MS.Internal.ServerClusters.Management.EventLogQuerySet.QueryWorker(Object a)

Что такое ошибка 0xC0000035?

В чем причина ошибки 0xC0000035 в Windows 11?

Измените раздел реестра Autologg
Отключите или удалите сторонний антивирус
Обновите Intel или другие сетевые драйверы
Выполнить сброс сети
Запустите сканирование DISM, чтобы восстановить образ системы

1]Мы предлагаем изменить ключ реестра Autologg.

В редакторе перейдите к следующему:

Компьютер HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control WMI Autologger EventLog-System {b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}

Следующим шагом является перезагрузка компьютера и проверка, сохраняется ли ошибка 0xC0000035.

2]Отключите или удалите сторонний антивирус.

3]Обновите Intel или другие сетевые драйверы.

Итак, есть несколько способов обновить Intel или другие сетевые драйверы на вашем компьютере с Windows 11.

4]Выполнить сброс сети

5]Запустите сканирование DISM, чтобы восстановить образ системы.

Читайте: Как найти и просмотреть файлы журнала BSOD в средстве просмотра событий Windows 10

Нужно ли включать DHCP если используется USB-модем?

Имя журнала: Microsoft-Windows-Kernel-EventTracing/Admin

Источник: Microsoft-Windows-Kernel-EventTracing

Дата: 16.01.2011 21:38:27

Код события: 2

Категория задачи:Сеанс

Уровень: Ошибка

Ключевые слова:Сеанс

Пользователь: система

Компьютер: Banny61rus-ПК

Описание:

Не удалось запустить сеанс «Circular Kernel Context Logger» со следующей ошибкой: 0xC0000035

Xml события:

<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>

<Computer>Banny61rus-ПК</Computer>

</System>

<Data Name=»SessionName»>Circular Kernel Context Logger</Data>

</Data>

</EventData>

</Event>

на http://www.eventid.net варианты решения предложены:

Peter Addor

x 1

EventID.Net

Various error codes and sessions can be reported with this message:

— Session {4498f992-a958-48ff-8218-eaf88df21469}, Error code 0xC0000188

— Session Circular Kernel Context Logger, Error code 0xC0000035 — See EV100113.

— Session «», Error code 0xC000000D — See EV100114.

— Session ReadyBoot, Error code 0xC0000188 — Apparently one shouldn’t worry about this one, see M2001347.

— Session Homegroup Log, Error code 0xC0000035: See EV100115.

Anonymous

Session Homegroup Log, Error code 0xC0000035. From a support forum:

This fixed it for me

1. Found this article M293497

2. Then did the following (from a command line):

— ipconfig /Flushdns

— ipconfig /release /all

Make sure DCHP is enabled (well I had to), then you may have to reboot (on restart, it re-registered with DNS).

Мне подходит первое получается:

Peter Addor

Но вот эти манипуляции по M929135 (http://support.microsoft.com/kb/929135) ничем не помогли.

Но вот немного подходит с (http://social.technet.microsoft.com/Forums/en-US/w7itproperf/thread/1ad12734-3cd2-4733-936d-9c4071ecdb63):

I am seeing the same Kernel-EventTracing Event 2, several times in a row, a second or less apart.

In my case, the text is:

Session «Circular Kernel Context Logger» has failed to start with the following error(s) 0xC0000035.

Same here. I don’t know if it’s related but I noticed this problem after examining why my notebook sometimes stubbornly refuses to go to sleep when the lid is closed. Running 7 64 bit ult.

Exact same errors but this fixed it for me (

There probably more to it and this may be just a workaround but its working since—no errors )

1 found this article http://support.microsoft.com/kb/293497

2 Then Did the folowing

(from cmd )

ipconfig /all — return (save results for next time—its microsoft)

ipconfig /Flushdns —return

ipconfig /release /all —return

quit

Make sure DCHP is enabled (well I had to), then you will have to reboot

—on restart, it re-registered with dns

Ive had no errors since thankfully. Im not very techy so hope the above makes sense. hopefully it might help somewhat.

Вот поэтому и хотел узнать насчёт DHCP/

А еще так и не решилась проблема http://homenet.beeline.ru/?showtopic=276619.

sircles

Avatar

Status: Moderator
Total Posts: 183

We are seeing the following on a Windows 2008 R2 Exchange 2007 box:

Does anyone know what action we need to take?

sircles

Avatar

Status: Moderator
Total Posts: 183

This appeared to be the mailbox assistant service having crashed that caused this error and not a harmless error as some of the internet was leading us to believe.

We restarted the service and the error disappeared.

Partition Wizard
Partition Magic
Fixed: Session «Circular Kernel Context Logger» Error 0xc0000188

By Irene | Follow |
Last Updated March 11, 2020

When you come across error message session «circular kernel context logger» stopped due to the following error: 0xc0000188, don’t worry. This post from MiniTool has summarized to effective solutions to help you solve the problem.

Recently, some Windows users reported that after starting their computer normally and using the PC for a short time, they got a grey, inconsistent, strange display instead of the normal display. When they go to their computer’s Event Viewer to check the problem, they get the following error message:

Session “Circular Kernel Context Logger” Stopped Due to the Following Error: 0xc0000188

The error message will be listed in the Overview and Summary page of the Event Viewer. This error could be caused by various reasons such as display drivers not working properly and the maximum file size of the Startup Event Trace Sessions being too small.

The error first discovered on Windows 7, and other versions of the Windows Operating System may also encounter this problem. And many users don’t know how to fix the error message.

How to fix the session «circular kernel context logger» stopped due to the following error: 0xc0000188 error message? After analyzing several posts that are related to this error, here I have summarized some top solutions.

If you don’t know how to fix the error message session «circular kernel context logger» stopped due to the following error: 0xc0000188, try the following solutions one by one.

Solution 1. Check If the Superfetch Service Is Enabled

If the Superfetch service is disabled or not running on your computer, you may get the session «circular kernel context logger» stopped due to the following error: 0xc0000188 error message on your computer’s Event Viewer.

To get rid of the error, you should make sure that the Superfetch service is enabled and is running.

Step 1. Press the Windows + R keys on the keyboard to bring up the Run dialog. Then type services.msc into the Run dialog and hit Enter.

Step 2. After opening the Services manager, scroll down and find the Superfetch service, right-click on it and choose Properties.

Step 3. If the Startup type box is set to Disabled, click the dropdown menu to change it to Automatic or Manual.

Step 4. Click Apply and OK to allow the change and then close the Properties window.

Step 5. Then right-click the Superfetch service again and then click Start to start the service. If the service is already running, just skip this step.

Step 6. Close the Services manager and restart your PC.

After restarting your PC, check to see if the problem gets resolved.

Solution 2. Increase the Maximum File Size of the Startup Event Trace Sessions

As mentioned before, if the maximum file size of the Startup Event Trace Sessions is too small, Windows users may come across the losing display issue and get the error message session «circular kernel context logger» stopped due to the following error: 0xc0000188 in their Event Viewer.

How to fix it? The best way is to manually increase the maximum file size of the Startup Event Trace Sessions. If you don’t know how to do this, just follow the steps below.

Step 1. Type cmd in the Windows Cortana search box and then right-click the best match Command Prompt to select Run as administrator.

Step 2. After launching the elevated Command Prompt, type the following command and hit the Enter key.

Perfmon

Step 3. After the Performance Monitor showing up on your PC, double-click on Data Collector Sets from the left pane of the Performance Monitor to expand it.

Step 4. Then click on Startup Event Trace Sessions under Data Collector Sets section.

Step 5. Navigate to the ReadyBoot entry from the list and double-click on it.

Step 6. Switch to the Stop Condition tab and change the value in the Maximum Size field to 40.

Step 7. Click on Apply and OK to save the change and then close the Performance Monitor.

Then you can close the elevated Command Prompt and restart your computer. After restarting, check if the issue is resolved and your computer goes back to normal.

Now you should know how to fix error message session «circular kernel context logger» failed to start with the following error: 0xc0000035. Which method works for you? Do you have better solutions? We are glad to have you share it with us.

Session «WbadminInBuiltTracing» failed to start with the following error: 0xC0000035

I’m getting the following error:
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin
Source: Microsoft-Windows-Kernel-EventTracing
Date: 5/17/2010 11:04:48 AM
Event ID: 2
Task Category: Session
Level: Error
Keywords: Session
User: ****
Computer: ****
Description:
Session «WbadminInBuiltTracing» failed to start with the following error: 0xC0000035
Event Xml:
<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>
<System>
<Provider Name=»Microsoft-Windows-Kernel-EventTracing» Guid=»{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}» />
<EventID>2</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>2</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000010</Keywords>
<TimeCreated SystemTime=»2010-05-17T18:04:48.898886000Z» />
<EventRecordID>45</EventRecordID>
<Correlation />
<Execution ProcessID=»4816″ ThreadID=»2800″ />
<Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
<Computer>****</Computer>
<Security UserID=»****» />
</System>
<EventData>
<Data Name=»SessionName»>WbadminInBuiltTracing</Data>
<Data Name=»FileName»>
</Data>
<Data Name=»ErrorCode»>3221225525</Data>
<Data Name=»LoggingMode»>2</Data>
</EventData>
</Event>
Does anyone know what this is or how to prevent it from
occurring?
I’m running Windows Server 2008 R2.
Thanks much,
James

Not according to my computer — (actually its at least 4 years now) which among so many other errors have haunted me from the day I bought it and took it home. I’ve spent literally a year of time out of the 5 I’ve had this laptop which btw is a home computer,
not a small business pc — searching, trying fixes that didn’t work, searching more trying fixes that worked only to have the same scenario begin again 2-3 months down the road OR new ones pop up — which starts the process all over again. I’m now getting BSOD’s
about once every 2-3 days with no reason in the event viewer.
And I continue to work on all the errors, warnings and critical errors with no results. I just wish Microsoft would fix these issues instead of developing new OS’s that not only carry these problems over but add new ones to each new OS. Don’t misunderstand
me. I like Windows, in fact I’m one of the very few graphic artists out there that prefer it over a MAC but its quite disheartening to be continually working on these issues to say the least.
Of course, it’s just my opinion….I could be wrong!

Session «Circular Kernel Context Logger» failed to start with the following error: 0xC0000035

fresh install and configure on A Dell optiplex3010 running window 7 pro 64 bit running can anyone tell what this is ?
Log Name: Microsoft-Windows-Kernel-EventTracing/Admin Source: Microsoft-Windows-Kernel-EventTracing Date: 4/16/2014 12:04:17 PM Event ID: 2 Task Category: Session Level: Error Keywords: Session User: SYSTEM Computer: HMCServer Description: Session «Circular
Kernel Context Logger» failed to start with the following error: 0xC0000035 Event Xml: <event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»><system><provider guid=»{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}»
name=»Microsoft-Windows-Kernel-EventTracing»><eventid>2</eventid> <version>0</version> <level>2</level> <task>2</task> <opcode>12</opcode> <keywords>0x8000000000000010</keywords>
<timecreated systemtime=»2014-04-16T16:04:17.657816300Z»><eventrecordid>44</eventrecordid> <correlation><execution processid=»4″ threadid=»60″><channel>Microsoft-Windows-Kernel-EventTracing/Admin</channel>
<computer>HMCServer</computer> <security userid=»S-1-5-18″></security></execution></correlation></timecreated></provider></system> <eventdata><data name=»SessionName»>Circular
Kernel Context Logger</data> <data name=»FileName»></data> <data name=»ErrorCode»>3221225525</data> <data name=»LoggingMode»>268436608</data> </eventdata> </event>

The error is implying there is a naming conflict. This could be 2 or more PCs with the same SID or Computer Name, or two different objects (shares/drives) attempting to use the same drive letter. There is one thing I found of renaming a file that has helped
some people:
http://social.technet.microsoft.com/Forums/windows/en-US/2eab69ac-7537-40c4-916e-6f6d41c05d4b/session-circular-kernel-context-logger-failed-to-start-with-the-following-error-0xc0000035?forum=w7itprogeneral

Session «UpdateUx» failed to start with the following error: 0xC0000022

Running WTP Build 10049 and get the following error, after every boot/reboot :
Error 21/04/15 11:09:39 Kernel-EventTracing 2 Session
Expanding this, by clicking on it, produces the following message :
Session «UpdateUx» failed to start with the following error: 0xC0000022
Any suggestions for a cure.

Hi athol49,
Which account you have used to logon this machine?
This error code is mostly related with the service permission, which indicates that the permission is not configured correctly.
Try to boot into safe mode and check this issue again, make sure there is no 3rd-party software involved.
Next thing is to create another admin account( or enable the built-in admin account to create a new admin account, as this one have permisssion issues), then check this issue again.
Further, run the DISm command to make sure there is no component issue:
DISM /Online
/Cleanup-Image
/RestoreHealth
/source:WIM:X:sourcesInstall.wim:1
/LimitAccess
Where the X: is the drive for the install media, or the mounted ISO.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Session «» failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session «» failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I’m missing because I’m not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn’t apply or doesn’t fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

IP Helper Service causes Session «» failed to start with the following error: 0xC000000D

I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session «» failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
I have a Windows 8.1 Pro version. In the event viewer I can see that the error `Session «» failed to start with the following error: 0xC000000D´ is registered every time I boot my laptop.
I am 100% sure that this is related to the IP Helper Service (iphlpsvc) because the error is logged every time I manually restart the service.
Does anyone know how to fix this issue? I know I could disable the service but I prefer not to do it.
Thanks
Alberto

Hi,
IP Helper (service name ‘iphlpsvc’) is apparently designed to improve a Windows PC’s support for IPv6 network protocol.
I suggest you try enable the dump collection by copying following words into notepad, saving it as dump.reg and importing it:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsWindows Error Reportinglocaldumpsiphelper.exe]
«DumpFolder»=hex(2):63,00,3a,00,5c,00,63,00,72,00,61,00,73,00,68,00,64,00,75,
00,6d,00,70,00,73,00,00,00
«DumpCount»=dword:00000010
«DumpType»=dword:00000001
«CustomDumpFlags»=dword:00000000
Once the error appears again, please find the crashdump file under c:.
Regards,
Kelvin hsu
TechNet Community Support

Error event id 2 — Kernel Event Tracing — Session «» failed to start with the following error: 0xC000000D

I keep getting this strange error logged as Error event id 2. Note session string is blank «». Any ideas?
Log Name:      Microsoft-Windows-Kernel-EventTracing/Admin
Source:        Microsoft-Windows-Kernel-EventTracing
Date:          24/12/2009 09:08:20
Event ID:      2
Task Category: Session
Level:         Error
Keywords:      Session
User:          SYSTEM
Computer:      George-XXL
Description:
Session «» failed to start with the following error: 0xC000000D
Event Xml:
<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>
<System>
    <Provider Name=»Microsoft-Windows-Kernel-EventTracing» Guid=»{B675EC37-BDB6-4648-BC92-F3FDC74D3CA2}» />
    <EventID>2</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>2</Task>
    <Opcode>12</Opcode>
    <Keywords>0x8000000000000010</Keywords>
    <TimeCreated SystemTime=»2009-12-24T09:08:20.835299100Z» />
    <EventRecordID>36</EventRecordID>
    <Correlation />
    <Execution ProcessID=»1944″ ThreadID=»1948″ />
    <Channel>Microsoft-Windows-Kernel-EventTracing/Admin</Channel>
    <Computer>George-XXL</Computer>
    <Security UserID=»S-1-5-18″ />
</System>
<EventData>
    <Data Name=»SessionName»>
    </Data>
    <Data Name=»FileName»>
    </Data>
    <Data Name=»ErrorCode»>3221225485</Data>
    <Data Name=»LoggingMode»>5</Data>
</EventData>
</Event>

Can you let us know if you get any Blue Screen crush error while using your comptuer?
Generally we can safely ignore the errors in the Event log. Aas we don’t if you have get other issues in your computer, you can test your computer in the Clean Boot mode. This method will help us determine if this issue is caused by a loading program or service.
You can try the the following steps:
1. Click the Start Button type «msconfig» (without quotation marks) in the Start Search box, and then press Enter.
2. Click the «Services» tab, check the «Hide All Microsoft Services» box and click «Disable All» (if it is not gray).
3. Click the «Startup» tab, click «Disable All» and click «OK».
Then, restart the computer. When the «System Configuration Utility» window appears, please check the «Don’t show this message or launch the System Configuration Utility when Windows starts» box and click OK.
Please test this issue in this Clean Boot environment, if the issue disappears in the Clean Boot environment, you can use the dichtomy to quickly narrow down which entry is causing the issue. You can refer to the
KB929135.
Good luck!
John
This is a very poor answer. This guy doesn’t know what he’s talking about because if you tell someone its ok to «safely ignore the errors in the event log» as a blanket instruction ESPECIALLY because as he stated so himself
he didn’t know if there were other issues with the OP’s pc then he’s giving really bad advice. If you ignore errors in the event log then over time your system will degrade and you will have other issues.. Every error on your pc should NOT be ignored.
It should be decided on a case by case situation.
Furthermore this is an error involving the Windows Session which it states has failed. Definitely should NOT be ignored.
I’ve got the same error which has suddenly just showed up. No BSOD, Do not have WHS installed and all my media center connectors have NEVER been connected. I don’t believe this is a service issue. I think it has something
to do with kernel event tracing.
Of course, it’s just my opinion….I could be wrong!

Standard AGENT_IC fails to open with the following error

We have upgraded our crm system from crm 4.0 sp6 to CRM 2007. When i configured the default role in our development system we are getiing the following error
The following error text was processed in the system CRD : Syntax error in program CL_CRM_BOL_TX_MANAGER=========CP .
The error occurred on the application server BRGCRD01_CRD_10 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: START_UP of program CL_CRM_BOL_CORE===============CP
Method: INITIALIZE of program CL_BSP_WD_APPLICATION=========CP
Method: INITIALIZE of program CL_CRM_UI_FRAME===============CP
Method: DO_INIT of program CL_BSP_WD_APPL_CONTROLLER=====CP
Method: DO_INIT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Strangely in our sandpit system we didn’t get this error. Authorisations are ok and all services are active
Look forward to your response on this
Thanks
Eddie

I have the same issue on Windows Server 2008 R2 SP1
>will fix it
in future release
What is the next release for my Windows Server? When will it be released?

HT1386 Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

Sry for disturbing, but i would to ask that how to overcome the problem of synchronising ? Itune showing me that the sync session is failed to start with my Ipad mini. Any ideas about what is going on ?

What are you trying to sync?
I see you are on ios 7.
I also had upgraded my iPad Mini to ios 7 & then the 1st time I tried to open a Numbers file that was set up to sync w my MacBookPro, I got a warning that I would not be able to sync it any more w my Mac until I upgraded to Mavericks.
So if you are trying to sync Numbers, Pages or Keynote files between your iPad mini in ios 7 and a Mac that hasn’t been upgraded to Mavericks that could be the problem.
I was very shocked to get that message since I bought Numbers on the iPad so that I could have a particular file on both devices & keep them synced. I had no clue when I upgraded to ios 7 on the iPad Mini that it would make it so the files in the iWorks apps woudln’t sync any more.
So I finally decided to go ahead & upgrade to Mavericks after carefully preparing & updating other software so that it would work w Mavericks. But I got error messages so haven’t even been able to download Mavericks & now having 2nd thoughts about doing so.
iPad mini ios 7
MacBookPro Mid 2012 Mountain Lion
iphone 4S ios 6

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6

SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6
This is not a REMOTE Exchange 2010 server, I’m launching it from the SBS2011 Console with the Domain Admin.
It looks like a permissions error, because when I use «RUN AS ADMINISTRATOR» on the exchange management tool, it launches with no errors and no issues…
I searched and I couldn’t find anything that fits this exact error.
Thanks
Russ

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

HT1766 I’m wanting to back up my iPhone to my PC but the following message keeps coming up — iTunes could not back up «Neil’s iPhone » because a session could not be started with the iPhone. What does this mean and what do I do to resolve problem please.

What do I do about message:- iTunes could not back up iPhone because a session could not be started with the iPhone.

Read https://discussions.apple.com/thread/5010662?start=0&tstart=0

ITunes could not back up the iPhone because a session could not be started with the iPhone

Hi
I have just updated to iTunes 10.7.(oh it just scrolled off the screen give me 5 minutes for it to come back again) 10.7.0.21 — the latest version
I run Win7 64bit & during installation i got the blue-screen of death & windows crashed
I went to apple website & downloaded iTunes manually & installed (it tried to install in the (x86) folder as usual, so i forced it into the 64 bit program folder like i always have to do.
It now runs fine but when ever i sync in get the error «iTunes could not back up the » iPhone because a session could not be started with the iPhone»
I have tried deleting the existing backup as suggested in the forums but that didn’t solve the problem, and now i have no backups at all
I have restarted the iPhone & the computer but the error is still the same.
PS i have «Encypt local backup» selected, if i try to unselect that option at the moment it says my password is incorrect, my password is correct, i made a record of it & know exactly what password i used but iTunes is saying it is wrong, is this because i have no backups at the moment or is iTunes completely broken
I have also tried to backup to iCloud as a temporary measure but it says i don’t have enough space so must buy some!
Any help would be appreciated

Could be that iTune can’t read your latest backup file. You might have to delete it, follow this article to find out how to delete the backup from the list: iTunes: «Backup could not be saved on the computer» alert message

My ipod won’t sync. keeps coming up with error message saying ‘ itunes could not back up ipod because a session could not be started with the ipod’ help?

My ipod won’t sync to my itunes. Keeps coming up with the error message ‘itunes can not back up the ipod because a session could not be started with the ipod? it has been coming up with this message for the lst 2 weeks now. Will let me charge it but won’t let me sync anything. Really not sure what to do or where to start or anything!

Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it’s fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
http://www.apple.com/itunes/
If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
Windows is notorious for having «other» issues that make it unstable, we as volunteers helping others can’t always resolve those issues.

Job is failing with the following error- Error calling a method of the tree

dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
   Job                              Ln    Job CreatedB    Status          Start date     Start time      Duration(sec.)     Delay (sec.)
XYZ                                                                    Canceled        16.11.2009    10:11:30                  9                         27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date      Time     Class No.   Message
+—-
+—-
2009/11/16 05:03:01 | 00     516 | Job started
2009/11/16 05:03:01 | 00     550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00     518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is «Öutbound interface of picked shipments»
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM

> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that «error calling a method of the tree control»
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log » (program RBDMON00, variant SBCI287, user ID KRISF)»
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 — double click on the job that was failed — Click on Step (on application tool bar) to get the program name — double click on the program name — new popup will be opened — then copy the program and variant
Go to se38 — enter the program — execute (F8) — choose the variant that is there in the background job — run in forground first
if the run is good — then check the program — SE38 — Display the program then see
I just saw the above message BD87… .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this?

ITunes cannont backup the iPhones because a session could not be started with the iPhone» I’ve never connected my phone to any other computer and it worked fine a the other day. Help Please?

I’m trying to sync my iPhone 3G S to my computer. Midway through I get a message «iTunes cannot backup the iPhone because a session could not be started with the iPhone.» I have not connected my phone to any other computer and this just began happening within the last day or so.
PLEASE HELP!!

One of your backup files might be corrupt. Try following the steps in this article to correct the issue: http://support.apple.com/kb/ts2529

sircles

Avatar

Status: Moderator
Total Posts: 185

We are seeing the following on a Windows 2008 R2 Exchange 2007 box:

Does anyone know what action we need to take?

sircles

Avatar

Status: Moderator
Total Posts: 185

This appeared to be the mailbox assistant service having crashed that caused this error and not a harmless error as some of the internet was leading us to believe.

We restarted the service and the error disappeared.

Регистратору контекста циклического ядра сеанса не удалось запуститься со следующей ошибкой: 0xc0000035 — это призрак, который преследовал последние три основных выпуска Windows. Это ошибка, которую Windows 10 по существу унаследовала от Windows 7.

Хотя это происходит реже в Windows 10, оно все же время от времени вызывает синий экран смерти. Но почему и как это исправить? В этом руководстве мы ответим на эти и другие вопросы.

Почему Circular Kernel Context Logger не запускается?

Ниже приведены некоторые факторы, которые могут привести к тому, что сеанс «Circular Kernel Context Logger» не запустится со следующей ошибкой: проблема 0xc0000035 на вашем ПК:

Отключенная служба: некоторые пользователи сообщают, что эта проблема возникает из-за того, что служба Superfetch отключена. Решение этой проблемы — включить службу и перезагрузить компьютер.
Устаревшие драйверы. Иногда эта проблема может быть вызвана неисправными или устаревшими сетевыми драйверами. Обновление драйверов до последней версии должно восстановить нормальную работу.
Проблемы с сетевыми настройками. В некоторых случаях это сообщение об ошибке появляется из-за того, что включен IPv6. Многие пользователи смогли исправить это, просто отключив эту функцию.

Как исправить Circular Kernel Context Logger 0xc0000035?

1. Полностью перезагрузите компьютер

Нажмите на меню «Пуск».
Нажмите кнопку питания.
Теперь выберите параметр «Перезагрузить».

Иногда самое простое решение обычно является самым эффективным. Простой перезапуск может помочь. Например, если вы имеете дело с ошибкой Circular Kernel Context Logger.

Проблема может быть связана с ошибками, которые будут устранены после перезагрузки компьютера.

2. Удалите файл MSSEOOBE.etl.

Нажмите Windows клавишу + E и перейдите в папку ProgramData на локальном диске (C:).
Щелкните Майкрософт.
Выберите Основы безопасности Майкрософт.
Теперь нажмите «Поддержка».
Щелкните правой кнопкой мыши файл MSSEOOBE.etl и выберите параметр «Удалить».
Наконец, перезагрузите компьютер.

Файл MSSEOOBE.etl является частью Microsoft Security Essentials. Однако это может вызвать ошибку Circular Kernel Context Logger.

Следовательно, вам нужно удалить папку, чтобы решить проблему. Обратите внимание, что это решение работает только для пользователей, использующих Microsoft Security Essentials.

3. Включите службу Superfetch/SysMain.

Нажмите Windows клавишу + R , введите services.msc и нажмите кнопку ОК.
Теперь дважды щелкните службу Superfetch или SysMain, чтобы открыть ее свойства.
Установите для параметра «Тип запуска» значение «Автоматически» и нажмите кнопку «Пуск», если служба не запущена.
Далее нажмите «Применить», а затем «ОК».
Наконец, перезагрузите компьютер.

В некоторых случаях ошибка Circular Kernel Context Logger может появиться, если служба Superfetch отключена. Так что не пугайтесь, если вы не можете найти службу Superfetch на своем ПК.

Это связано с тем, что в более поздних версиях Windows 10 служба Superfetch называется SysMain. Так что они практически делают одно и то же.

4. Настройте максимальный размер файла сеансов трассировки событий запуска.

Нажмите Windows клавишу + R , введите perfmon и нажмите OK.
Разверните Наборы сборщиков данных в дереве слева.
Щелкните Сеансы трассировки событий при запуске.
На главной панели прокрутите вниз, пока не найдете запись ReadyBoot, а затем дважды щелкните ее.
Нажмите на вкладку «Условие остановки».
Установите максимальный размер 40 МБ (или больше).
Наконец, нажмите OK и закройте системный монитор.

Не удалось запустить циклический регистратор контекста ядра сеанса со следующей ошибкой: может появиться сообщение 0xc0000035, поскольку максимальный размер файла сеансов трассировки событий запуска недостаточен. Вы можете использовать это решение, чтобы исправить это.

5. Отключить IPv6

Нажмите Windows клавишу + R , введите ncpa.cpl и нажмите кнопку OK.
Щелкните правой кнопкой мыши первое соединение, которое вы видите, и выберите «Свойства».
Теперь снимите флажок Интернет-протокол версии 6 (TCP/IPV6).
Нажмите «ОК».
Наконец, повторите шаги 2–3 для другого сетевого адаптера в списке.

Другим эффективным решением этой ошибки Circular Kernel Context Logger является отключение IPV6. Это решило проблему для многих пользователей. Так что будет лучше, если ты попробуешь.

6. Обновите сетевые драйверы

Нажмите Windows клавишу + X и выберите Диспетчер устройств.
Дважды щелкните параметр «Сетевые адаптеры», чтобы развернуть его, и щелкните правой кнопкой мыши основное устройство локальной сети.
Теперь выберите «Обновить драйвер» в контекстном меню.
Нажмите «Автоматический поиск драйверов».
Наконец, установите все доступные обновления и перезагрузите компьютер.

Вам следует обновить драйвер, если приведенные выше исправления не устраняют ошибку Circular Kernel Context Logger. Один из лучших способов сделать это — использовать обновление Windows, как показано выше.

Кроме того, вы можете автоматически обновлять драйверы с помощью специального программного обеспечения. Таким образом, вы сэкономите время и получите правильную версию драйвера.

Вы также можете сканировать все свои драйверы и найти, нужно ли их обновить или восстановить. Инструмент даст вам простой отчет о состоянии каждого драйвера. Вы должны позволить ему начать обновление/восстановление.

Если ни одно из решений, описанных в этом руководстве, вам не помогло, единственным вариантом является переустановка или обновление Windows, если вы используете более старую версию.

Однако, если эта ошибка сохраняется, но не влияет на работу вашей системы, ее можно игнорировать.

Итак, какое решение сработало для вас? Хотите указать на слепое пятно на нашей стороне? Пожалуйста, не стесняйтесь оставлять комментарии внизу. Как всегда, спасибо за чтение.

Источник

Session «WbadminUIInBuiltTracing» failed to start with the following
error: 0xC0000035

windows server 2008 r2 standard.

i open “windows server backup” node in server manager , see error message in system log after that.

sourece: kernel-eventtracing

eventid: 2

session «wbadminuiinbuilttracing» failed start following error: 0xc0000035

- system      - provider       [ name] microsoft-windows-kernel-eventtracing     [ guid] {b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}        eventid 2        version 0        level 2        task 2        opcode 12        keywords 0x8000000000000010       - timecreated       [ systemtime] 2010-12-01t11:17:19.937490400z        eventrecordid 17        correlation       - execution       [ processid] 3472     [ threadid] 3100        channel microsoft-windows-kernel-eventtracing/admin        computer lodger.aqa.com.ru       - security       [ userid] s-1-5-21-1644491937-706699826-1417001333-3605        - eventdata      sessionname wbadminuiinbuilttracing    filename    errorcode 3221225525    loggingmode 2

what causes error? need avoid it?

hi,

it recommanded post question in following forum instead:

backup – windows , windows server

http://social.technet.microsoft.com/forums/en-us/windowsbackup/threads

i found same issue and support engineer mentioned harmless , fix in future release:

http://social.technet.microsoft.com/forums/en-us/windowsbackup/thread/02ac2078-ac0e-48d1-b3db-3f2e76319afb

shaon shan| technet subscriber support in forum| if have feedback on our support, please contact tngfb@microsoft.com

Windows Server > File Services and Storage

some help on Event 540

does event 540 me distinguish between user , administrator access? this event generated ypon successfull logon, logon exactly? successful logon on system? is there other way log administrator access system using event viewer? thank valuable response georges hi, as far know, cannot distinguish between user , administrator access event 540. more information, please refer to: event id: 540 http://www.microsoft.com/technet/support/ee/transform.aspx?prodname=windows+operating+system&prodver=5.0&evtid=540&evtsrc=security&lcid=1033 events 528 , 540 http://blogs.msdn.com/b/ericfitz/archive/2004/12/09/279282.aspx regards, bruce this posting provided «as is» no warranties, , confers no rights. please remember click «mark answer» on post helps you, , click «unmark answer» if marked post not answer question. can beneficial other community members reading thread.

Windows Server 2008 R2 Standard in place upgrade to the Enterprise
Edition

i have run 32 gb limit on windows server 2008 r2 (sp1). used host hyper-v vms (2 of them). know if can in place upgrade standard enterprise edition has 2 tb limit , allow me use full 48 gb of ram vm. thanks! hi, yes, can upgrade windows server 2008 r2 enterprise , make full use of 48gb ram. http://msdn.microsoft.com/en-us/library/aa366778(vs.85).aspx#physical_memory_limits_windows_server_2008_r2 tim quan technet subscriber support in forum if have feedback on our support, please contact tngfb@microsoft.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ please remember click “mark answer” on post helps you, , click “unmark answer” if marked post not answer question. can beneficial other community members reading thread. Windows Server > Setup Deployme

Allow log on through terminal servcies for window 7 and 2008

search internet, found setting said can set «allow log on through terminal services» in window 7 but found «allow log on through remote desktop services», change parameter name «allow log on through terminal services» «allow log on through remote desktop services» ? pls advice. thx !! search internet, found setting said can set » allow log on through terminal services » in window 7 but found «allow log on through remote desktop services «, change parameter name «allow log on through terminal services» «allow log on through remote desktop services» ? pls advice. thx !! i’m not sure if understand correctly mean, prior windows server 2008 , windows 7, remote desktop services called terminal services. search internet right. imho. check out link more info: http://msdn.microsoft.com/en-us/library/windows/desktop/bb892075(v=vs.85).aspx got above link: windows server 2008 r2, windows s

Источник

Update error — SQL Server 2008 SP1

Hello

I am using Windows 7 Ultimate 64 bit

I installed VS2010 Trail, then I installed SQL Server Express Studio

My Windows shows update there is a update for SQl Server 2008 Service Pack 1

But when I try to install this update

I get an error like below

Error Code 84 B 20001

a few times with error below

WindowsUpdate_20000001 WindowsUpdate_dt000

What should I do to fix this

Thank you

Harsha

RedandBlue,
The link Shalini gave about the clean boot procedure provides detailed instructions on the use of MSConfig. I think you have just misunderstood the steps listed above. When you open msconfig, click on the button beside selective startup. Then uncheck (clear) the box «Load system services» and «Load Startup items» and then apply and restart.

If you have not seen this thread , you can read through it, because it covers the same error you see. Mike — Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

M1536ndf — install fatal error on Server 2008 R2 x 64 (Hyper-V)

I can’t install a multifunction HP M1536ndf on server 2008 R2 x 64.

Solved…
Server 2008 R2 requires the installation of desktop experience pack.

License Activation Code error — Win Server 2008 R2 Server remote desktop

I installed and activated other components RD. However, when we want to get into CAL, I get the error message «the license code is not recognized. Make sure that you have entered the correct license code» I use Windows 2008 Server R2 Enterprise edition.
Please, could you do something for us?

Concerning

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

Implementation error «ConsolePrint has stopped working» on Server 2008 for printing from any windows client PC 7.

I have a domain system ADS in my organization. Server, but also the client PC is in the same domain. These last days we receive error «consolePrint has stopped working» then we print from any client PC. We use the laser printer, printers DMP. Printers are connected directly to any customer PC and shared with other computers.

When we print from a client, whenever we get this popup error on Server 2008 «ConsolePrint has stopped working».

Please help in this regard.

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

Windows server 2008 r2 (0 * 1) error in the task shedeuler

Uses a machine to windows server 2008 r2 server. in windows, library of tasks sheduler get error in daily backup code (0 * 1) I tried to run manually, but doesn’t work .i try to resolve the error with some sujjessions given by some professionals .but while applying changes his watch just that the administrator password is wrong. or am not allowed as a sentence. but the thing is am the admin of the server and has access to the remote server. I tried to manually launch its working, but errors still. in my case, the error is in the backup industry… and need to be deleted as soon as possible. the answers and sujjessions will be greatly appeciated

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

TechNet forums:

https://social.technet.Microsoft.com/forums/en-us/home

MSDN forums:

https://social.msdn.Microsoft.com/forums/en-us/home

See you soon.

error of the MMC in windows server 2008 r2

while closing after my windows server 2008 r2, many programs are open so I tried to close all the one by a sudden .at instead of using the X I used the close button. in mmc, I suppose that an error has occurred that caused problem blocking the program works correctly

1 debug the program

2. close the program

I opted first then after closing the program, debug in my server its marked as an error event viewer now. No. changed happened in my network. and it of good now

I just wanted to know the weather, that it will lead to other problems in the future

the description of the error below

Name of the failing application: mmc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc808
The failed module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc000041d
Offset error: 0 x 0000000000000000
ID of the process failed: 0 x 1250
Start time of application vulnerabilities: 0x01d2126e21d827f5
The failing application path: C:\Windows\system32\mmc.exe
Path of the failing module: unknown
Report ID: 6acff019-7e81-11e6-ade8-001aa08bdf6f

am new on the server field pls sujjest me a response to make sure that my server running without any problem…

This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)

If you give us a link to the new thread we can point to some resources it

Cannot install updates on Server 2008 R2. Reporting EventViewer 2147500034 error

I have a problem with Windows Server 2008 R2, where I am unable to install updates. I already ran the Microsoft Fixit and he relate not apparently something wrong that either it reports an error.

In trying to apply updates to a manual download, I get the following in the Event Viewer error.

Windows update might not be not installed due to the 2147500034 error «no such interface supported» (command line: «» C:\Windows\system32\wusa.exe»»C:\…\desktop\Windows6.1-KB2913751-x64.msu»»)

This happens with any update downloaded that I try to apply.

Any help would be greatly appreciated.

Hello

Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Services Terminal Server Windows Server 2008 R2 improved Configuration Error IE

We have a Windows Server 2008 R2 with enhanced IE configuration set to off for all users on the Server Terminal Server services only. The sessions of the Terminal services Server running Windows XP. Whenever an end user clicks on Microsoft Outlook in a session, it executes an error from IE Configuration improved mentioning that the site needs to be added to the zone of confidence (subject: internet.) Unfortunately, I do not know what url he speaks out. I would like to know what precisely needs to be disabled in order to avoid the mistake of filling. We have already defined group policy to disable this, but apparently not take after or gpupdate/force runs a logoff of connection occurred. Of alternatives that anyone can give would be great. Thank you very much.

Nick

This issue is beyond the scope of this site which is for the consumer to related issues.

To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it’s related to the developer

IIS on Windows Server 2008 SP2 Manager error

We would like to ask for your support on an issue that we have encountered on IIS 7.0.

Our application is running on a Windows Server 2008 SP2 64-bit computer and uses ASP.NET 1.1.
We intend to change the account used for anonymous authentication through the IIS Manager.

However, we have encountered this error when you open the feature of authentication in IIS.

—————————
Authentication
—————————
There was an error during the execution of this operation. Details:

Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.configError:

Same error also occurs when you view other features of IIS.
Hope you could give us some ideas on how to solve this problem.

This issue is beyond the scope of this site and must be placed on Technet or MSDN

When will install Server 2008 Windows OS. Error Msg 0 x coming 80070070: «do not have enough space for the installation…» Even if I have 20 GB of space? Pls solve this problem immediately.

Hey Shiva,

I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsserver2008r2general

Please do not hesitate to contact us if you have other questions related to Windows.

Windows Server 2008 R2 Activation error 0 x 80070005

Diagnostic report (1.9.0027.0):
——————————————
Validation of Windows data—>

Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: n/a, hr = 0x80070005
Windows product key hash: n/a, hr = 0x80070005
Windows product ID: 55041-178-8577096-84607
Windows product ID type: 6
Windows license type: Volume MAK
The Windows OS version: 6.1.7601.2.00020110.1.0.007
ID: {2F5492D1-27AD-4A54-8E0B-53EB6FCB6291} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows Server 2008 R2 Standard
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 — 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a

Given Vista WgaER—>
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002

Windows XP Notifications data—>
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002

OGA Notifications data—>
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002

OGA data—>
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Data browser—>
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: disabled
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: disabled
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: disabled
Recognized ActiveX controls safe for scripting: disabled

Analysis of file data—>
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

Other data—>
Office details: {2F5492D1-27AD-4A54-8E0B-53EB6FCB6291}1.9.0027.06.1.7601.2.00020110.1.0.007x 64*-*-*-*-BATH55041-178-8577096-846076S-1-5-21-3011534046-397137371-3240662683Microsoft CorporationVirtual MachineAmerican Megatrends Inc.. 090006 20120523000000.000000 + 00062C80D00010000F204090409India Standard Time(GMT+05:30)13VRTUALMICROSFT109

Content Spsys.log: 0 x 80070002

License data—>
C:\Windows\system32\slmgr.vbs(1333, 5) Microsoft VBScript runtime error: permission denied

Windows Activation Technologies—>
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered — 0 x 80040154
The admin service: not registered — 0 x 80040154
Output beyond bitmask:

—> HWID data
N/a, hr = 0x8007000d

Activation 1.0 data OEM—>
N/A

Activation 2.0 data OEM—>
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC VRTUAL MICROSFT
MICROSFT FACP VRTUAL
SRAT VRTUAL MICROSFT
VRTUAL MICROSFT WÆT
SLIC VRTUAL MICROSFT
OEM0 VRTUAL MICROSFT
VRTUAL MICROSFT LASRYVITRAGE

Ask in the forum Windows Server:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

Hello world…

I am in a big mess… and really need help!

I did last night a Backup windows… but one of my users were connected to the server works with applications…

and this morning No 32 no bits applications… same installer…
the 64-bit application works very well…

Others or generating an error 0xc000005 and stop…
failing Ole32.dll module…

And I’m sure that the backup is reliable, even if the backup of windows said it was successful…

I tried to restore only the apps files… but it seems more complicated than that…

If anyone has an idea…

Hi, Emeric,.

Thanks for posting the question on Microsoft Community.

According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

As the question more appropriate forums Technet, write the topic in this forum for better support.

http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

Using the windows-related issues feel free to post on Microsoft Community.

Errors in user profile on the server terminal server 2008 R2

I have a problem on a Windows Server 2008 R2 SP1 running Terminal Server services with roaming profiles. The server works as a terminal server server for some time without any problems, but a few weeks ago he began logging on users with temporary profiles or refusal to sign indicating «the user profile Service has no logon. User profile cannot be loaded. «Once rebooted the server seems to act normally, but when 8-10 users have experienced successful logons, the above behavior reappears. At the end of the day, when the activity of the user falls, he can still connect new users — it seems that it is not related to the content of the files of the user’s profile. When I check the event logs, the user profile service seems to work, successfully copying profiles on local profile paths. The Windows Modules Installer service cannot be started, error 1450 insufficient system resources. SFC and Windows Update don’t work either, probably related to the error of the Windows Modules Installer. In addition, a mistake DCOM («the server is not registered… «) is recorded in the log of events after each reboot, by referring to the»component base maintenance Session. My impression is that this problem is related to a kind of inadequate resources (non-material resources, the server is well equipped for the current level of activity), so I was running after the registry size, memory management, memory paged and nonpaged pool size, etc, but without any significant success. I realize that it is a somewhat soft and open query and I’ll be happy to provide all necessary information — I spent a bit of time on this problem, and any suggestion or comment is welcome.

This kind of question is really beyond volunteers in this forum, which
deal with Windows users with security issues. You must go to
TechNet and browse the forums to see if there is a good place for this post,.
TechNet is where the gurus of Pro and server IT hang out.

Error in Windows Server 2008 R2 Terminal Server printing

Hello

Recently, we encounter an error when printing with our new printer to Terminal Server (Windows Server 2008 R2 Standard 64-bit Edition). Once we remotely to the Terminal Server, we are able to see the printer redirect, but when we test print he meets an error and cannot print. Please help and advice. Your quick response with goodness and advice will be highly appreciated. Thank you.

Hello Djemila,

Microsoft Communities is for consumer issues in Windows 8, Windows 7, Windows Vista and Windows XP. Your question is dealing with Terminal Server in Windows Server 2008 R2 server and would be better treated in the TechNet forums.
Click here for the repost in Windows Server 2008 Terminal Server forums.

They have experts for help with your issue.

Sincerely,

Marilyn

Источник

Question

Answers

Вопрос

Ответы

Question

Answers

Question

Answers

Что такое ошибка 0xC0000035?

В чем причина ошибки 0xC0000035 в Windows 11?

Вопрос

Ответы

Question

Answers

Вопрос

Ответы

Question

Answers

Question

Answers

Что такое ошибка 0xC0000035?

В чем причина ошибки 0xC0000035 в Windows 11?

Solution 1. Check If the Superfetch Service Is Enabled

Solution 2. Increase the Maximum File Size of the Startup Event Trace Sessions

Почему Circular Kernel Context Logger не запускается?

Как исправить Circular Kernel Context Logger 0xc0000035?

1. Полностью перезагрузите компьютер

2. Удалите файл MSSEOOBE.etl.

3. Включите службу Superfetch/SysMain.

4. Настройте максимальный размер файла сеансов трассировки событий запуска.

5. Отключить IPv6

6. Обновите сетевые драйверы

Session «WbadminUIInBuiltTracing» failed to start with the following error: 0xC0000035

Popular posts from this blog

some help on Event 540

Windows Server 2008 R2 Standard in place upgrade to the Enterprise Edition

Allow log on through terminal servcies for window 7 and 2008

Session «WbadminUIInBuiltTracing» failed to start with the following
error: 0xC0000035

Windows Server 2008 R2 Standard in place upgrade to the Enterprise
Edition