Waves central has run into some issues ошибка

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

I was trying to install a couple of Waves plugins and did enter/register their serials at the Waves website. The problem I had was within Waves Central after clicking on Easy Install, selected the two plugins, and install…..I keep getting an error message stating there was a problem with the install and to contact Waves Support if the error continues (which I did do yesterday).

I also have a couple of other Waves plugins that were previously installed through WC and never did have any issues with the installation. Just checking in here if to see if anyone else has run into this or knows of a solution (not sure how good Waves support is).
TIA

post edited by Mesh — 2017/06/27 12:58:04

Platinum Gaming DAW: AsRock Z77 Overclock Formula
I7 3770k @ 4.5GHz : 16GB RAM G.Skill Ripjaws X
250GB OS SSD : 3TB HDD : 1TB Sample HDD
Win 10 Pro x 64 : NH-D14 CPU Cooler
HIS IceQ 2GB HD 7870
Focusrite Scarlett 2i4
The_Forum_Monkeys

cclarry

Max Output Level: 0 dBFS

Total Posts : 20964
Joined: 2012/02/07 09:42:07
Status: offline

Re: Waves Central Issue

2017/06/26 13:10:01

(permalink)
☼ Best Answerby Mesh 2017/06/27 12:58:28

Mesh
I was trying to install a couple of Waves plugins and did enter/register their serials at the Waves website. The problem I had was within Waves Central after clicking on Easy Install, selected the two plugins, and install…..I keep getting an error message stating there was a problem with the install and to contact Waves Support if the error continues (which I did do yesterday).

I also have a couple of other Waves plugins that were previously installed through WC and never did have any issues with the installation. Just checking in here if to see if anyone else has run into this or knows of a solution (not sure how good Waves support is).
TIA

Make sure you have the latest version of Waves Central

http://www.waves.com/downloads/central

mudgel

Moderator

Total Posts : 12010
Joined: 2004/08/13 00:56:05
Location: Linton Victoria (Near Ballarat)
Status: offline

Re: Waves Central Issue

2017/06/26 13:10:48

(permalink)

Their support is excellent.

Mike V. (MUDGEL)

STUDIO: Win 10 Pro x64, SPlat & CbB x64,
PC: ASUS Z370-A, INTEL i7 8700k, 32GIG DDR4 2400, OC 4.7Ghz.
Storage: 7 TB SATA III, 750GiG SSD & Samsung 500 Gig 960 EVO NVMe M.2.
Monitors: Adam A7X, JBL 10” Sub.
Audio I/O & DSP Server: DIGIGRID IOS & IOX.
Screen: Raven MTi + 43″ HD 4K TV Monitor.
Keyboard Controller: Native Instruments Komplete Kontrol S88.

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/26 13:53:27

(permalink)

cclarry

Mesh
I was trying to install a couple of Waves plugins and did enter/register their serials at the Waves website. The problem I had was within Waves Central after clicking on Easy Install, selected the two plugins, and install…..I keep getting an error message stating there was a problem with the install and to contact Waves Support if the error continues (which I did do yesterday).

I also have a couple of other Waves plugins that were previously installed through WC and never did have any issues with the installation. Just checking in here if to see if anyone else has run into this or knows of a solution (not sure how good Waves support is).
TIA

Make sure you have the latest version of Waves Central

http://www.waves.com/downloads/central

I should’ve mentioned that when running WC, it does look for an updated version and then I log into WC…..so, I «assumed» I didn’t need to do anything there. My last resort was to uninstall/reinstall…..which I haven’t done yet.

Thanks Mike…..good to know they’re excellent.

Marshall

Max Output Level: -78 dBFS

Total Posts : 602
Joined: 2007/06/14 04:28:16
Location: Alicante, Spain
Status: offline

Re: Waves Central Issue

2017/06/26 14:47:39

(permalink)
☄ Helpfulby Mesh 2017/06/26 14:48:38

+1 for excellent support. When I had an issue last year, they arranged to call me, took control of my pc and spent an hour sorting my problem out. All resolved.

BassDaddy

Max Output Level: -33 dBFS

Total Posts : 4232
Joined: 2012/12/31 13:55:58
Location: I’m an American. From America!
Status: offline

Re: Waves Central Issue

2017/06/26 20:49:32

(permalink)

Had the same thing Mesh. try to install again, then click on follow instructions to trouble shoot. Its in the error message. Go down to about the 5th thing to try. It tells you were to go to delete cache. Delete it and run it again. make sure all you plugs are in the cloud before you try and do Easy Install Activate. If I was at computer I would give you exact instructions but this should be good enough. It worked for me.

It’s Bass, not Bass.
i7 2700K, 16GB DDR3, 2 SSD sample drives and OS drive, HDD SATAIII for projects, 2 24″ monitors
Focusrite Saffire Pro 24, Focusrite VRM Box, LAVA Lamp, SONAR Platinum 64 bit, Mackie MCU and 1 MCU XT, Akai Advance 49, Windows 10,
Komplete 9 Ultimate, Cakewalk, Toontrack, IK, AAS, XLN, UVI, Air Music Tech, Waves Factory, Sample Tek and Sonivox VSTi’s. Overloud, T-Racks, Audio Damage, D16, Nomad Factory, Waves Gold FX

interpolated

Max Output Level: -74 dBFS

Total Posts : 830
Joined: 2015/03/26 17:34:58
Status: offline

Re: Waves Central Issue

2017/06/27 10:32:39

(permalink)

I had a similar issue with the cache which got resolved. In the end I just launch my licenses from a thumb drive, so I don’t need to be online all of the time.

mudgel

Moderator

Total Posts : 12010
Joined: 2004/08/13 00:56:05
Location: Linton Victoria (Near Ballarat)
Status: offline

Re: Waves Central Issue

2017/06/27 11:01:55

(permalink)

With this update because there was a new plugin added to Mercury I had to update it in my online account so the addition was reflected in the installer. I don’t remember ever having to do this before.

When an update doesn’t work for some reason

Before you reinstall always make sure to delete the folder

C:/User/YourUserName/Appdata/Local/WavesAudio

Reboot and then reinstall all your files.
.

Mike V. (MUDGEL)

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/27 12:57:32

(permalink)

Larry was right and thanks BassDaddy for those extra tips (was very helpful in sorting things out). I was running an older version of WC (even though the old installer was claiming to search for updates every time I ran it……not very intuitive).
I didn’t have to delete the cache folder and I saw (within the WC) that it was installed. I did temporarily turn off some of the options in Windows Defender/Firewall etc… (per Waves suggestions) when running the installer.

However, I noticed during the installation process (on the older version as well as the newer) that it was locking up/slowing down/generally not being able to access other apps (i.e. Task Mgr., Win Explorer, access Task Bar items etc…) on my PC.
That concerned me quite a bit as I’ve never had any issues like this with any installer or anything else for that matter on this machine (on my older XP machines yes, I had the system slow down due to the 4GB RAM limit). Just not sure how this WC installer (consistently) could bring my system to a halt like that?? I rebooted and tested to see if it was the WC that was causing this……surely enough, it was (the latest version). It finally installed after a few runs at it.
IMO, this installer could use a LOT of improvements and I also had to enter the serials in my online account for the installer to see it……not very intuitive at all .

Anyway, it’s installed within WC but I haven’t yet tested the plugins in Sonar. I also got an email this morning from tech support at Waves stating to use the latest version. I’ll definitely let them know my experience with this.

Thanks to all of you for all your help…..you guys rock!!!

dcumpian

Max Output Level: -34 dBFS

Total Posts : 4124
Joined: 2005/11/03 15:50:51
Status: offline

Re: Waves Central Issue

2017/06/27 15:39:25

(permalink)

Mesh
However, I noticed during the installation process (on the older version as well as the newer) that it was locking up/slowing down/generally not being able to access other apps (i.e. Task Mgr., Win Explorer, access Task Bar items etc…) on my PC.

WC spawns a crap ton of threads to do it’s thing somewhat asynchronously. That’s likely where the «slowdown» is coming from.

Regards,
Dan

Mixing is all about control.

My music:
http://dancumpian.bandcamp.com/ or https://soundcloud.com/dcumpian Studiocat Advanced Studio DAW (Intel i5 3550 @ 3.7GHz, Z77 motherboard, 16GB Ram, lots of HDDs), Sonar Plat, Mackie 1604, PreSonus Audiobox 44VSL, ESI 4×4 Midi Interface, Ibanez Bass, Custom Fender Mexi-Strat, NI S88, Roland JV-2080 & MDB-1, Komplete, Omnisphere, Lots o’ plugins.

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/27 18:18:38

(permalink)

dcumpian

Mesh
However, I noticed during the installation process (on the older version as well as the newer) that it was locking up/slowing down/generally not being able to access other apps (i.e. Task Mgr., Win Explorer, access Task Bar items etc…) on my PC.

WC spawns a crap ton of threads to do it’s thing somewhat asynchronously. That’s likely where the «slowdown» is coming from.

Regards,
Dan

I’m inclined to agree with you Dan as I noticed youtube and other sites were being affected during this. I just don’t like my system being at the mercy of WC.

cclarry

Max Output Level: 0 dBFS

Total Posts : 20964
Joined: 2012/02/07 09:42:07
Status: offline

Re: Waves Central Issue

2017/06/27 20:17:27

(permalink)
☄ Helpfulby Mesh 2017/06/27 20:28:03

Glad to help Meshy! Ya…not very intuitive, and, for the
most part, even when WC checks for updates, it doesn’t see
them…and the WORST part is you can’t uninstall individual
plugins. You have to uninstall EVERYTHING and then reinstall
what you want…that’s DUMB

interpolated

Max Output Level: -74 dBFS

Total Posts : 830
Joined: 2015/03/26 17:34:58
Status: offline

Re: Waves Central Issue

2017/06/28 12:22:35

(permalink)

No that’s Waves «protecting their…I mean your investment»

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/28 12:25:57

(permalink)

I ran Sonar to make sure all the Waves plugins were working. I could see all the other plugins, but out of the 2 new ones installed (SSL E Channel & Brauer Motion), only the SSL shows up. I went through each audio fx plugin and couldn’t find Brauer……I could see all of them within the Waves Shell (on my C: drive).

Any thoughts?

interpolated

Max Output Level: -74 dBFS

Total Posts : 830
Joined: 2015/03/26 17:34:58
Status: offline

Re: Waves Central Issue

2017/06/28 12:33:45

(permalink)

Presuming these are all VST3 versions and rerun a VST scan, if you need to it manually, only that the license has not been copied along with the rest of them to your thumb drive or wherever you keep them.

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/28 12:52:47

(permalink)

interpolated
Presuming these are all VST3 versions and rerun a VST scan, if you need to it manually, only that the license has not been copied along with the rest of them to your thumb drive or wherever you keep them.

I’m not exactly sure what Waves has installed (not at my DAW now), but I generally install VST2’s & 3’s and only 64bit. The licenses were registered at the waves website and I did see that all the licenses were the «Full Version» within WC.
Is there an option within the WC to choose what gets installed? (I don’t remember seeing anything during installation)

Wibbles

Max Output Level: -82 dBFS

Total Posts : 404
Joined: 2015/01/17 16:16:46
Status: offline

Re: Waves Central Issue

2017/06/29 09:05:00

(permalink)

mudgel
Their support is excellent.

Waves Central is such a pain that it needs to be.

I’m off to see the Wibble, the wonderful Wibble of Wobble

Grem

Max Output Level: -19.5 dBFS

Total Posts : 5562
Joined: 2005/06/28 09:26:32
Location: Baton Rouge Area
Status: offline

Re: Waves Central Issue

2017/06/30 14:04:38

(permalink)
☄ Helpfulby Mesh 2017/06/30 14:16:16

Mesh

Is there an option within the WC to choose what gets installed? (I don’t remember seeing anything during installation)

Yes. When running WC, choose Install, then on the left side choose from the cloud. Then you can pick what you want to install by putting a check mark by the plugs you want to install. As you put a check by the plug, it should move to the right panel. Then hit install.

I would check and make sure Bauer Motion was installed.

Grem

Michael

Music PC
i7 2600K; 64gb Ram; 3 256gb SSD, System, Samples, Audio; 1TB & 2TB Project Storage; 2TB system BkUp; RME FireFace 400; Win 10 Pro 64; CWbBL 64,
Home PC
AMD FX 6300; 8gb Ram; 256 SSD sys; 2TB audio/samples; Realtek WASAPI; Win 10 Home 64; CWbBL 64
Surface Pro 3
Win 10 i7 8gb RAM; CWbBL 64

Mesh

Max Output Level: 0 dBFS

Total Posts : 27360
Joined: 2009/11/27 14:08:08
Location: Online right here!
Status: offline

Re: Waves Central Issue

2017/06/30 14:19:03

(permalink)

Grem

Mesh

Is there an option within the WC to choose what gets installed? (I don’t remember seeing anything during installation)

Yes. When running WC, choose Install, then on the left side choose from the cloud. Then you can pick what you want to install by putting a check mark by the plugs you want to install. As you put a check by the plug, it should move to the right panel. Then hit install.

I would check and make sure Bauer Motion was installed.

Thanks Grem, I’ll take a look tonight and try that if Brauer Motion isn’t showing up in Sonar.

Содержание

Не могу установить плагины в waves central в пакет Waves complete ( FL studio)
Waves Central — новая система регистрациискачивания (1 онлайн
Wham_48
Waves central ошибка при установке
Waves central ошибка при установке

Не могу установить плагины в waves central в пакет Waves complete ( FL studio)

5 Гб) на жесткий диск с образа и у меня пошла установка

Мне помогли установить вот эти рекомендации:

Удалите папку Cash из установочной папки
*Все запуски установок, кидженов, патчеров делаются от имени администратора при любой установке и активации. Нигде и никакие папки откудакуда будет вестись установка на всем пути, по всему адресу, не должны содержать кириллистических знаков (исключения — системные папки типа Пользователи). Также, имя компьютера и учетная запись должны быть на латинице. В системе вы должны находится на правах администратора. В системе по умолчанию и без обсуждений для этих плагинов у вас должны быть установлены Microsoft Visual C++ 2005-2008-2010-2012-2013-2015-2017. Не нужно создавать матрешки из 15 папок и качать туда. Из-за длинных имен файлов папок будет ошибка при установке. Качайте в корень диска.
Удалить предыдущую версию. Очистить систему от всех оставшихся папок и все записи в реестре.
(C:Program FilesCommon FilesVST3 — WaveShell1-VST3…
C:Program FilesVSTPlugins — WaveShell1-VST…
C:Program Files (x86)Common FilesVST3 — WaveShell1-VST3…
C:Program Files (x86)Common Files — WPAPI
C:Program Files (x86)VstPlugins — WaveShell1-VST…
C:Program Files (x86) — Waves, Waves Central
C:UsersИМЯ — .Waves Central
C:UsersИМЯAppDataLocal — Waves Audio
C:UsersИМЯAppDataRoaming — Waves Audio
C:UsersPublic — Waves Audio)

Источник

Wham_48

Sneiro Member

Пробую сейчас поставить на чистую систему (Win7 64бит), глючная софтина всё ещё. Решил попробовать создать оффлайн инсталлер, выбрал сингл-продукт, уазал папку куда сохранить — вроде запомнило. Чтото скачивало-скачивало, выдало комплит. В итоге в указанной папке ничего не обнаружил, исчу вот куда оно чего скинуло.. И это явно системный раздел, т.к. места там поуменьшилось. И не в основной папке вейвсов (C:Program Files (x86)Waves), а фиг знает где.
Вообще плохо то что теперь уже изначально (при установке етого централа) всё валится на системный раздел.
Блин, раньше всё было просто, оффлайн инсталлер и клиент для регистрации. Сейчас я так понимаю такой возможности уже непредвидется (чтоб для последних версий плагинов).
Гемор какойто вейвсы придумали.

UP Во, и чувак на квр пишет что после последнего апдейта через централ ID плагина поменялся ))) «Now my projects with automation data won’t work propertly» http://www.kvraudio.com/forum/viewtopic.php?t=451130#p6305804
Вообще весело.

UP2 После инсталяции того что скачал, всё это инсталится в корень стстемного раздела в папку Waves, без возможности выбора (?)

Навсякий, после всего этого, вейвс оказывается в следующих местах:
C:Waves
C:ProgramDataWaves Audio
C:Program Files (x86)Waves
C:Program Files (x86)Common FilesWPAPI

UP3
Короче снёс всю эту хрень нафиг (причём все папки с кучей файлов после унинстала остались на своих местах, вручную надо вычищать), поставлю обратно V9r30.

Источник

Waves плагины. Проблемы с установкой.

Джеиймс

Дата: Понедельник, 07.09.2015, 18:58 | Сообщение # 1

Здравствуйте, работаю в Кубейсе 7, столкнулась с проблемой: стояли раньше плагины Waves v9r26, все отлично работало, но вскоре полетел ноут (ничего особенного, просто шлейф от матрицы отошел) я разобрала, починила. Оказалось, что Кубейс перестал видеть прагины, он при запуске выкидывал окна по поводу этих плагинов. раньше уже было такое, я полность сбивала весь ноут ( возврат к заводским настройкам, ну и естественно все все данные были стерты). Сейчас решила попробовала переустановить плагины — удалила все, на компе ничего не осталось от них, но при установки нового пакета ( при закуске установщика) выдает ошибку — Runtime error. Версию меняла — тоже не помогает. может кто сталкивался с подобной проблемой?

вот фото окна с ошибкой

Elaim

Дата: Понедельник, 07.09.2015, 19:21 | Сообщение # 2

Нашел статью: Как исправить «runtime error»?
chto-s-kompom.com/kak-ispravit-runtime-error

Еще советую просто незаменимую прогу — Acronis True Image

Acronis True Image — Универсальный загрузочный диск, содержащий пакет программ для полного резервного копирования, позволяющий создавать точные образы жесткого диска и отдельных его разделов

Т.е. делаете с помощью этой программы копию жесткого диска С (системного). И если у вас вдруг заглючила винда или поймали вирус — делаете бэкап системы. И не нужно винду переустанавливать.

— установите новую винду
— установите драйверы
— поставьте все программы, с которыми вы работаете
— сделайте копию системного диска С с помощью программы Acronis True Image

Источник

Waves central ошибка при установке

I had a heck of time upgrading to Waves 9.6 last week. I finally got everything installed and running. DRM and obfuscation is truly a wonderful thing for users (NOT). I’ll note that you now have no choice as to where the Waves plugs are installed.

You think I would have learned my lesson, but I got another Waves plug during their Cyber Monday sale today, used Waves Central to install & authorize it — and it did not show up in REAPER! «Rescan» — nothing. >:-(

After some thrashing, I found out (on Windows x64) that if you delete all the «WavesShell_VST_9.6. » lines from reaper-vstplugins64.ini and restart REAPER the new plugs appear. I suspect that just removing the «WaveShell_VST_9.6_x64.dll=123456789,0, » line would do it. My theory is that now that everything runs through WavesShell, you have to ‘touch’ WavesShell so REAPER calls it’s init routine, which I suspect is the only time WS looks for new plugs.

Hope this helps others who find themselves in the same situation. I’m fairly sure (for the masochists) «Delete VST cache and re-scan» would also work.

it seems that users have trouble to install Waves plugins. A few explanations may be helpful.
This is how it works:

On Windows, the Waves installer copies all required files (DLL and others) into an installation directory
named «c:Program FilesWaves» (32 bit OS) or «c:Program Files(x86)Waves» (64 bit OS).

The Waves installation folder contains a subfolder named «Waveshells».

The Waveshell gives you access to all Waves plugins. It is like a single DLL file that contains all Waves plugins.
Several versions are available:

WaveShell-VST 9.6.dll . VST2 plugins for 32 bit DAW
WaveShell-VST 9.6_x64.dll . VST2 plugins for 64 bit DAW
WaveShell-VST3 9.6.vst3 . VST3 plugins for 32 bit DAW
WaveShell-VST3 9.6_x64.vst3 . VST3 plugins for 64 bit DAW

In short, you must copy the required WaveShell file to your plugins folder.

Proceed as follows in order to use Waves VST2 plugins:

1. Locate your VST plugins folder (e.g. c:VstPlugins)

2. In this folder, create a subfolder named «Waves»

3. Copy the required Waveshell DLL file into this subfolder

Certain Waves VST2 plugins offer sidechain functionality. These plugins
feature an [SC] icon in the upper left corner, next to the Waves logo.

Examples: C1 comp, C1 gate, RCompressor, InPhase.

Click the [SC] icon in the upper left corner of the plugin to switch from internal
to external gain reduction detection.
[SC] black = internal detection; [SC] orange = sidechain inputs used for detection.

Proceed as follows in order to use Waves VST3 plugins:

1. Locate the VST3 folder
«c:Program FilesCommon FilesVST3» (normal case)
«c:Program Files(x86)Common FilesVST3» (special case: 64 bit OS with 32 bit DAW)

2. In this folder, create a subfolder named «Waves»

3. Copy the required Waveshell VST3 file into this subfolder

Certain Waves VST3 plugins offer sidechain funtionality.

Examples: C1 comp, C1 gate, RCompressor, InPhase, VocalRider

The «plug-in pin connector» window is used to switch from internal to
external gain reduction detection. Sidechain inputs are used for detection
if they are connected in the connector window. Otherwise the normal input
signal determines gain reduction.

Make sure that the VST plugins folder (and optionally also the VST3 plugins folder) is specified in the Reaper VST preferences. After [Clear cache/re-scan], Reaper will show all installed Waves plugins although only the related Waveshell has been scanned.

That sort of confirms what I was thinking. However, from my experiences so far REAPER will not «see» new plugins added unless you get it to call the WaveShell initialization routine (by removing the WaveShell from the appropriate plugin INI file or doing a full clear cache + rescan)

Edit: I just retested this and confirmed new WaveShell plugs don’t show up in REAPER until you remove the «WaveShell_VST_9.6_x64.dll=0123456789,0, » line from the reaper-vstplugins64.ini file. I haven’t tested the ‘clear cache and rescan’ theory yet (and hope not to!)

Also I find I often get weird errors in Waves Central unless I start it using ‘Run as Administrator.’

it seems that users have trouble to install Waves plugins. A few explanations may be helpful.
This is how it works:

I assume you are from Waves?

well, your explanations are another reason why I dont use Waves and will not use Waves plugins.

is there another way thinkable to install plugins without all that hassle? how do other developers do it? is it really wise, to force an installation path on the user?? there are so many reasons to have the plugins NOT on C:

but you professional developers (with that prices for plugins) are not able to develop an installer that lets the user choose? or are you not willing to do so? ok, then its your problem. you will loose customer after customer, because Waves is since some time not the top of the cream anymore, if it anytime was the top at all, what I really doubt.

this whole thing is ridiculous. I wanted to jump on the black friday plugin, saw that I would have to install Waves central, read a little bit about it and thought to myself: well, f*** Waves reverb, there are other that are at least equally good.

time will come and time will tell. but that thread and especially that post is telling that everyone should be think about Waves twice and if in doubt, leave it out. Waves is for me of no interest, and I think, that many others feel the same.

maybe you at Waves rethink what you are doing. hope it for you.

I assume you are from Waves?

well, your explanations are another reason why I dont use Waves and will not use Waves plugins.

maybe you at Waves rethink what you are doing. hope it for you.

Here is some person that may have been from waves, from what I see what he or she was trying to do was give help and advice.

When the hell are we going to start entreating people instead of dissing people.

Not every one has had a bad experience with waves and they that have had a bad experience are still using waves plugins.

many do use waves and many dont, but its not only waves that some have bad experiences there are many plugins that people have bad experiences with.

I for one have not had that many bad experiences with waves and even now with waves central am finding it very quick and easy to install and use plugins, when i here of some of the problems people have i am baffled, because I just dont get them,

truth is you really dont need waves central to install your plugins, only there newly made plugins you will need waves central.

From what I am being told waves is soon going to be supporting reaper just like they started supporting FL.

But one thing must be said if we are representing a reaper forum then we must make people welcome, and if there trying to help then except it, it may not have helped you but it would have helped some one else.

The cyber world is huge it would be quite impossible not to have a bad experience with plugins and vsts instruments,

If you were working for waves and you were told to distribute a product a certain way thats what you need to do.

Alot of this difficulty in dongles and licenses, and it only can be installed here or there came because of thieves people who steal software and crack software and share it with all there friends,

Yes it can still be cracked but it makes it a little more difficult.

So lets give the guys from waves a little brake, they have really contributed to the musical needs of thousands of music producers, given great quality of plugins and have pushed the boundary of plugin creation, and emulation, lets stop bad mouthing these company’s on this reaper forum it does not look right and it does not represent me and many more people who are involved in this forum.

Источник

Tacman7
Posts: 4381
Offline

Had waves on my studio computer many years, never had a problem running their installer.

Trying to run it on this secondary computer I get a crash that says can’t get permissions and list all these locations where it can’t get permissions.

I looked at my explorer and my folders have read only button but I installed S15 and a bunch of stuff lately without any problem.

They’re offering to troubleshoot the problem remotely.

I don’t know about that…

Should I let them do that?

Thanks

I was going to put this in the off topic forum but it is gone.

Forum Moderator.
Please add your specs to your SIGNATURE.
Search the STUDIO ONE 5 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.

Studio OnePro5 Melodyne Studio
Studio Computer — Nectar Impact LX25+
Win10 i7 7700k 16gb ram 1TB SSD AsusH270M-PLUS interface:StudioKonnekt 48
Kitchen Computer — Microkey Air Eris 3.5
Win10 Ryzen 5 3600 — Radeon RX 590 — 512GB SSD interface: Motu M2
Kitchen Audio Mac Mini M1 Apollo Solo

by PreAl on
Mon Jul 20, 2020 6:21 pm

PreAl
Posts: 2932
Offline

Reboot, make sure no other apps are running. Perhaps temp disable your antivirus.

You could try creating a new user account under Windows and log in. Then try to install. That would rule out a corrupted user profile.

Studio One Pro 5, Faderport Classic (1.45), Atom Pad, Atom SQ, Presonus Studio 26c, Focusrite Saffire Pro 40, Maschine Studio, Octapad SPD-30, Roland A300, Windows 11 Pro 64 bit, also running it on Mac OS Catalina via dual boot (experimental).

Intel i9 9900K, 32GB RAM,
EVGA Geforce 1070 (Nvidia drivers).
Dell Inspiron 7591 (2 in 1) 16Gb.

by Bbd on
Mon Jul 20, 2020 6:45 pm

Bbd
Posts: 5545
Offline

Let them troubleshoot remotely.

Bbd

Please add your specs to your SIGNATURE.
Search the STUDIO ONE 6 ONLINE MANUAL. Access your MY.PRESONUS account.
OVERVIEW of how to get your issue fixed or the steps to create a SUPPORT TICKET.
Needs to include: 1) One Sentence Description 2) Expected Results 3) Actual Results 4) Steps to Reproduce.

OS: Win 10 x64 Home, Studio One Pro 6.x, Notion 6, Series III 24, Studio 192, Haswell CPU: i7 4790k @ 4.4GHz, RAM: 32GB, Faderport 8/16, Central Station +, PreSonus Sceptre S6, Eris 3.5, Temblor 10, ATOM, ATOM SQ

by IanM5 on
Mon Jul 20, 2020 11:37 pm

IanM5
Posts: 641
Offline

Tacman7 wroteThey’re offering to troubleshoot the problem remotely.

I don’t know about that…

Should I let them do that?

Yes, let them but make sure you remove all your pirated stuff and your porn first!

Heavy-handed moderation can strangle a forum

by Tacman7 on
Tue Jul 21, 2020 6:59 am

Tacman7
Posts: 4381
Offline

Yea, I’m going to do that later today.

Thanks all.

I went through lots of restarts, shutting down firewall, changing permissions of folders etc.

WaterlooSunset
Posts: 528
Offline

i Let them in my machine once. Was totally harmless IMHO. I watched
I installed Wireshark to check on some suspicious internet traffic. All my Waves plugins stopped working saying not installed. Turns out Waves uses the LAN config as a check or something for machine based licensing, and when PCAP installed the pseudo adapter, that bungled Waves..

Win 10 latest, MSI G41 Z87, I4770K (no OC), 16GB, NVIDIA 710, 2×27″ Monitors 1Tb SSD, 500G SSD, 3 platter drives. SYBA Firewire SD-PEX30009, FS Mobile. Monitor2USB, S1 Pro 5 current.
Hobbiest — Mainly Guitars, UVI, Soundtoys, NI, IK, EZ2, SD3, GR5, TH3, Amplitube 4 and 5, Waves GR,
Korg 707, NanoPAD2, MicroKey2. Eris 5, B2031A, 2013 R1200GS-LC.

by Tacman7 on
Tue Jul 21, 2020 5:53 pm

Tacman7
Posts: 4381
Offline

Yea, I haven’t had any problems in so long I forgot basics.

Delete the download and download again, uninstall application, reinstall.

He did shut a lot of security down in Windows first.

It was cool. Doing a separate installation for version 9 plugins now.

Thanks everyone.

Who is online

Users browsing this forum: No registered users and 8 guests

Источник

WAVES Complete «Central has encountered a system permission issue»

Discussion in ‘PC’ started by triplesiccx, Nov 9, 2021.

triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0

Hi Community,
im here on Windows 10, i used to had the WAVES Complete version from last Year without any Problems, but now i want to install the newer Versions from this Year but it wont let me. Everytime i want to install
waves central «CENTRAL HAS ENCOUNTERED A SYSTEM PERMISSION ISSUE» shows up in the instalation window so i need to close it.
I tried a lot of things like deleting local host machine and all of them other folders, restarting and so on but nothing helps im also logged in as admin on my PC
The error indicates the installer tries to copy file(s) to a path he actually has’nt write permissions for.
Normally the installer does’nt need elevated rights but nevertheless would try to start the installer as admin
triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0

right click and start as admin? thats what i tried too but still the same
BEAT16
Audiosexual

Joined:

May 24, 2012

Messages:

9,082

Likes Received:

6,952
How to Solve ‘Installation Failed’ Errors in Waves Central
https://www.waves.com/support/error-during-product-installation-using-waves-central#restart

This means that Waves Central is encountering an issue when attempting to write files to your computer..

Try each of the following steps, one at a time, then try to install again.
If the issue persists, move on to the next step.
1. Quit all running programs/applications except for Waves Central.
2. Access Waves Central’s Settings tab, then press Clear next to ‘Clear Central cache.’
3. This error may also occur if the sample library location is not accessible to Waves Central.Access Waves Central’s Settings tab, then press Change next to ‘Sample libraries data folder.’Set the location to: Applications > Waves > Data > Instrument Data.
4. Restart your machine.
5. Uninstall any previously installed Waves products. Full instructions can be found here.
6. Verify that you have Administrator privileges on your operating system.
7. If you do not, or if the issue persists, create a new Administrator user account.
Installation failed – The user hasn’t granted permission

This is often displayed when Waves Central encounters a permission issue when trying to read or write a file to or from your drive:

If you are prompted with a ‘Waves Central wants to make changes’ message, please allow this by clicking ‘Yes’ in Windows or by typing your Mac’s System User and Password in order to grant proper permissions.

Try each of the following steps, one at a time, then try to install again.
If the issue persists, move on to the next step.
1. Ensure you have granted Waves Central permission to run its processes:
  
  Windows: After clicking ‘Install’, click Yes when prompted by a message that reads ‘Do you want to allow this app to make changes to your device?’
  
  Mac: After clicking ‘Install’, enter your Mac’s Username and Password when prompted, then click OK.
2. Close all currently running programs/applications except for Waves Central.
3. In Windows: Right-click Waves Central, and choose ‘Run as Administrator.’
4. Restart your computer.
5. Verify that you have Administrator privileges on your operating system.
6. If you do not, or if the issue persists, create a new Administrator user account.
triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0

hi beat15,
bei punkt 3. unten steht
In Windows: Right-click Waves Central, and choose ‘Run as Administrator.’ und dann punkt 4 restart, meinen die nachdem die installation zu ende ist oder während ich punkt 3 ausführe?
You mentioned that you had a previous version of Waves installed.
So I would start completely over.
In this case, it makes sense to uninstall Waves and Waves Central completely and delete all residues by hand of Waves from the system.

So search in the paths:

%APPDATA%\Waves Audio
%APPDATA%\Waves Central
%LOCALAPPDATA%\Waves Audio
%PROGRAMDATA%\Waves Audio
C:\Users\Public\Waves Audio
C:\program files\
C:\program files\Common files
c:\Program Files (x86)
c:\Program Files (x86)\Common files

After you cleared everything make sure you are using an administrator account to run Waves Central in it’s context.
Install Waves Central and then Waves as you need.

If that does’t work redo all of the above cleaning steps, this time define a new Administrator account and use this account to install Waves central and the Waves (point 6 in @BEAT17s description)
triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0
triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0

nothing helps….könnte es daran liegen weil ich online bin? sollte ich meinen wlan stick ziehen so dass ich offline bin?
BEAT16
Audiosexual

Joined:

May 24, 2012

Messages:

9,082

Likes Received:

6,952

Please check your mailbox!
I don’t really believe that, because it’s about the operating system’s messages. But it is still possible. Try it.

However, I have had more success by using the R2R’s release. R2R uses its own installer and not the Waves Central routine, which can do things in the background that we don’t know about.
So if everything else fails, use the R2R installer from sister site.

Good luck!

p.s.: Even with the release of R2R it is possible to install updated components from Waves with WavesCentral. So you have no disadvantage if you install R2R’s release.
But I don’t want to confuse you unnecessarily: If you have questions about this, we’ll clarify them separately.

Last edited: Nov 10, 2021
- Like x 2
- List
triplesiccx
Newbie

Joined:

Oct 14, 2021

Messages:

12

Likes Received:

0
machinezz
Newbie

Joined:

Jan 19, 2018

Messages:

1

Likes Received:

0

How to fix the «waves central has encountered a system permissions issue» error when starting up on macos? There is a way! This also solves the problem with the licenses, if there is one.

In order to fully fix Waves Central and restore its startup and eliminate the problems with license activation — you need to delete all files and folders where the keyword «waves» (search in finder) in these places:

1)
/Library/Application Support/
(Delete here folders «Waves» / «Waves Audio» / «Waves Central», some of them may be folders, if you see them, delete them)

2)
/user/Library/Application Support/
(Delete here folders «Waves» / «Waves Audio» / «Waves Central», folders may be some of them if you see them, delete)

3)
/Library/PrivilegedHelperTools/
(Delete all files/file with the word «waves»)

4)
/user/Library/Preferences/
(Delete all files with the word «waves»)

5)
/Applications/
(delete completely the Waves folder)

6)
After all manipulations — RESTART the computer, and then download the clean Waves Central in the applications and run. Now everything should go smoothly!

P.S..
If a folder is not deleting, and you get an error that the files/folder is locked by the system, you need to run a terminal and enter the command:
«chflags -R nouchg».
After that, hit «space» and DRAG the folder (that won’t get deleted) directly to the terminal window (its address will appear). Here’s how it should look like in terminal window for example:
«chflags -R nouchg /Applications/Waves».
Next — press enter, enter user password (it won’t show) and press «enter» again. Now any folder will be deleted without any problems.

I have suffered a lot of time before I managed to fix my problem after the system recovery, none of the methods on dozens of websites did not help, so I decided to write a really working method for other users, because before that I have not found an answer to my question
Good luck!

Источник

Jul 14, 2022

Find solutions and troubleshooting steps for all Waves Central issues and errors right here on this page:

Computer Appears as Disconnected Device in Waves Central

If you cannot manage your licenses in Waves Central because your computer appears under Disconnected Devices in the Licenses page, these are the possible reasons and solutions.

How to Solve Waves Central Login Issues and Errors

Learn how to solve various log in errors and issues in Waves Central, such as browser not launching for log in, incorrect time and date settings, illegal characters, and false-positive anti-virus detection.

How to Solve ‘Login Failed’ Error in Waves Central

If you receive an error message ‘Login failed. Please ensure your computer clock is set to correct date and time, then try to log in again’, follow these steps to solve this issue by syncing your computer’s date and time via your OS settings.

How to Solve ‘Installation Failed’ Errors in Waves Central

Learn how to solve any ‘Installation Failed’ error message while using Waves Central. Locate the specific error you are encountering on this page and follow the steps one at a time, trying to install before moving on to the next step.

How to solve ‘Central has encountered a permissions issue’ errors in Waves Central

Learn how to solve ‘Central has encountered a permissions issue’ errors in Waves Central, by disabling proxy settings.

How to Solve ‘Failure to Uninstall’ Error in Waves Central

Learn how to solve a ‘Failure to Uninstall’ Error in Waves Central. Follow these steps one at a time, trying to uninstall before moving on to the next step.

Missing Plugins after Installation

If some of your Waves plugins are missing after you installed them with Waves Central, consult one of the following pages in order to find them.

Troubleshooting
Waves Central

Источник

Can not install plugins with Waves Central V11

Waves just released Waves Central V11 as many of you probably know. I upgraded from V10 right away…and that is when shit hit the fan. Waves Central V10 worked 100% and I never had even the slightest issue with the program. But now nothing works in V11 apart from moving licenses between my device and the cloud.

When installing plugins I get the following error: https://i.imgur.com/I4l0GZN.jpg

So I tried repairing the program, but got this error: https://i.imgur.com/ZID7fUO.jpg

I even tried running the «version organizer within Waves Central but I of course got the following error: https://i.imgur.com/nuQSy8t.jpg

My system is a Razer Blade Stealth laptop with an Intel i5 processor, 8GB RAM, 512GB SSD and running Windows 10.

I have tried everything suggested by Waves in the following link: https://www.waves.com/support/error-during-product-installation-using-waves-central

I even removed every trace of Waves products from my system before trying a re-install of the program.

I also tried to install a legacy version from here: https://www.waves.com/downloads/v10 , but that comes with V11 of Waves Central (which is really weird) and so netted the same results. There seems to be no way to just download and install V10 of Waves Central which I know works on my system.

I have also contacted their support but it’s been 5 days now and they still have not managed to open the installation log and system report I sent them (I could not attach the zip to my email because Gmail blocked it so I had to use Google Drive but their tech support were unable to open it. So I sent them a Dropbox link but they can´t open that either «due to security reasons»). I am currently waiting for a response from them, which seems to take around 24 hours per reply, no matter how quickly I reply.

So basically I can’t open any of my sessions since they all rely heavily on Waves plugins and I don’t have endless time to wait for Waves support to finally reply to me. All help is much appreciated!

Источник