Vtb ошибка слежения

Содержание

  1. UE 33 Fehlermeldung
  2. 12 меню system setup и other setup – Инструкция по эксплуатации Pioneer VSX-921
  3. Страница 77
  4. Возможные неисправности и, Способы их устранения 1, Дополнительная информация – Инструкция по эксплуатации Pioneer VSX-921
  5. Страница 78: 13 дополнительная информация, Возможные неисправности и способы их устранения 1
  6. Pioneer vsx 921 ошибка ue33

UE 33 Fehlermeldung

#1 erstellt: 04. Sep 2011, 13:18

Kennt jemand die Hintergrьnde fьr diese Fehlermeldung und hat eine Lцsung?
Tritt bei meinem VSX-921 auf.
Bei Pioneer mal nachgefragt aber bis jetzt noch keine Rьckmeldung.

#2 erstellt: 07. Sep 2011, 11:39 #3 erstellt: 07. Sep 2011, 20:43

hab den VSX-1021 und der dazugehцrigen Bedienungsanleitung steht zur Fehlermeldung UE33:

Die Aktualisierung ist fehlgeschlagen. Verwenden Sie das gleiche Verfahren erneut, um die Software erneut zu aktualiseren.

Vielleicht gilt ja die Fehlerbeschreibung auch fьr den VSX-921.

Hoffe ich konnte weiterhelfen.

#4 erstellt: 12. Sep 2011, 07:14

Das hatten wir hier schon. LAde dir das Firmaware Update fьr den 1021 von der Pioneer-Electronics.com runter — Auf einen FAT32 formatierten Stick damit — Uber USB-Port Firmware Update einspielen — fertig. Keine Fehlermeldung mehr.

#5 erstellt: 18. Sep 2011, 19:24

Ich habe jedoch schon die neuste Firmware . 031 drauf.
Hab jedoch probiert trotzdem diese drauf zuspielen. Meldung: Neueste Firmware vorhanden. Kein Update nцtig.

Also der Fehler muss wohl irgendwie anders zu beheben sein.

#6 erstellt: 29. Sep 2011, 09:53

Hat mal jemand nen Link zu neuesten FW?

hier gibts keine http://www.pioneer.eu/eur/support/software/tax/952/index.html

und Pioneer-Electronics.com funzt bei mir nicht .

#7 erstellt: 29. Sep 2011, 11:30

Hat mal jemand nen Link zu neuesten FW?

hier gibts keine http://www.pioneer.eu/eur/support/software/tax/952/index.html

und Pioneer-Electronics.com funzt bei mir nicht .

Lg Stefan

http://www.pioneerel. ired+Firmware+Update

#8 erstellt: 30. Sep 2011, 10:58 #9 erstellt: 05. Okt 2011, 22:29

Ich bin etwas verzweifelt.

Hab mir nach langer Begeisterung nun endlich ein Mehrkanalsystem zugelegt. Und jetzt funktioniert es vorne und hinten nicht.

Hab einen Pionier VSX 921. Hier liegt das Hauptproblem. Ich weiss nicht ob ich damit nicht zurecht kom oder ob einfach was mit dem Gerдt nicht stimmt.
Ich bin normalerweise technisch schon sehr interessiert und versiert..

Aber jetzt zu meinem Hauptproblem: UE33.
Der Fehler kommt immer wieder sporadisch.

Das Problem ist, ich habe auf meinem Receiver bereits die Softwareversion die hier im Forum zur Lцsung des Problemen empfohlen wird.
Ich habe trotzdem mit USB-Stick das Update versucht. Es wird aber nicht durchgefьhrt da er meint eine Aktualisierung sei nicht nцtig.

Zudem hab ich noch weitere Probleme mit dem Receiver. Das Bild (Menь) wird nicht immer auf dem TV (HDMI) ьbertragen. Oft muss ich mehrfach den Receiver manuell an-ausschalten bis es kommt.

Und dann noch das Problem mit der Fernbedienung mal geht sie. viel цfter aber geht sie nicht. Da hilft dann auch nur «an-aus» am Receiver.

Das kann doch nicht sein?? 500 Euro fьr das Gerдt ausgegeben und dann sowas??

Kцnnt Ihr mir noch was empfehlen oder sollte ich das Gerдt austauschen?

#10 erstellt: 06. Okt 2011, 19:46

hast Du den Receiver an einer fritzbox ? Wenn ja, probiere mal ein switch dazwischen.
Habe den Tipp bei den Amazonbewertungen gelesen.

#11 erstellt: 08. Okt 2011, 12:06

Hab das Thema in Amazon-Bewertung auch verfolgt.
Hab den Tipp mit dem Switch auch gelesen.

Bei mir ist es etwas kompliziert. Er hдngt nicht direkt an einer Fritzbox.
Die Fritzbox ist zwar das DSL Modem, allerdings hab ich dahinter als «Switch» einen linksys wrt54G als zweiten Router und Switch hдngen.
Er ist also nicht direkt an einer Fritzbox.

Meint ihr wirklich es liegt daran? Mьsste mir extra einen switch kaufen. Hab hier keinen rum liegen.

Bin am ьberlegen das Gerдt austauschen zu lassen. Aber danach hab ich doch einen 99,9% Chance dass das wieder kommt?

Oder gibt es VSX 921 ohne diesen Fehler?

Danke fьr die Hilfe!

#12 erstellt: 08. Okt 2011, 17:54

Denke jetzt ьber eine Rьckgabe und Austausch gegen einen Onkyo 609 nach.

Mal sehen ob das klappt.

#13 erstellt: 29. Dez 2014, 00:17

Das Firmware-Update fьr den VSX-921 ist mittlerweile zu finden unter:

Firmware-Update VSX 921

Habe es soeben durchgefьhrt. Seitdem habe ich keinen Fehler UE33 mehr.

Источник

12 меню system setup и other setup – Инструкция по эксплуатации Pioneer VSX-921

Страница 77

Меню System Setup и Other Setup

Используйте данную процедуру для обнов-

ления программного обеспечения ресивера

и проверки версии. Существует два способа

для обновления: через Интернет и через

устройство памяти USB.

Обновление через Интернет производится

путем доступа к серверу с файлом с реси-

вера и загрузки файла. Данная процедура

возможна только при подключении реси-

вера к Интернет.

Обновление через устройство памяти

USB производится путем загрузки файла

обновления с компьютера, копирования

данного файла на устройство памяти USB и

дальнейшего подключения данного устрой-

ства памяти USB к порту USB на передней

панели ресивера. Для данной процедуры

устройство памяти USB с файлом обновле-

ния требуется сначала подключить к порту

USB на передней панели ресивера.

Если файл обновления имеется

на вебсайте Pioneer, загрузите его

на компьютер. При загрузке файла

обновления с вебсайта Pioneer на

компьютер, файл будет доступен в

формате ZIP. Разархивируйте ZIP файл и

затем сохраните его на устройстве памяти

USB. Если на устройстве USB имеются

любые старые загруженные файлы или

загруженные файлы для других моделей,

НЕ отсоединяйте кабель питания во время

При обновлении через Интернет

не отсоединяйте кабель LAN. При

обновлении через устройство памяти USB

не отсоединяйте устройство памяти USB.

1 Выберите ‹Software Update› в меню

2 Выберите процедуру обновления.

Update via Internet – Ресивер проверяет

наличие программного обеспечения для

обновления через Интернет.

Update via USB Memory – Ресивер

проверяет наличие программного

обеспечения для обновления на

устройстве памяти USB, подключенном к

порту USB на передней панели ресивера.

«Accessing» отображается и

производится поиск файл обновления.

3 Убедитесь на экране, был-ли найден

файл обновления или нет.

Если отображается «New version found.»,

это значит, что файл обновления был

обнаружен. Отображаются номер версии и

Если отображается «This is the latest
version. There is no need to update.

Источник

Возможные неисправности и, Способы их устранения 1, Дополнительная информация – Инструкция по эксплуатации Pioneer VSX-921

Страница 78: 13 дополнительная информация, Возможные неисправности и способы их устранения 1

На дисплее моргает сообще-

ние AMP ERR, и питание

ется. Моргает сообщение
ADVANCED MCACC

ние не включается.

Возможны серьезные неполадки на ресивере. Не пытайтесь включить

ресивер. Отключите ресивер от розетки и обратитесь в независимую

сервисную компанию, уполномоченную компанией Pioneer.

Ресивер неожиданно выклю-

чается или моргает индика-

Неисправен блок питания или вентилятор ресивера. Попытайтесь

включить питание. Если ничего не меняется, это значит, что ресивер

неисправен. Отключите ресивер от розетки и обратитесь в независимую

сервисную компанию, уполномоченную компанией Pioneer. (При вклю-

чении питания могут быть другие симптомы.)

На дисплее моргает
OVERHEAT

и питание отключа-

Дайте аппарату остыть в хорошо проветриваемом помещении, затем

попытайтесь включить его снова (см.

Установка ресивера на стр. 6 ).

Подождите как минимум 1 минуту, затем снова попытайтесь включить

питание.
Температура внутри аппарата превысила допустимое значение.
Уменьшите уровень громкости.

отключается и мигает
ADVANCED MCACC

Неисправен блок питания. Отключите ресивер от розетки и обратитесь

в независимую сервисную компанию, уполномоченную компанией

После выбора функции входа

звучание не выводится.

Отсутствует звучание от

Проверьте громкость, настройку приглушения звучания (нажмите
MUTE

) и настройку громкоговорителей (нажмите SPEAKERS).

Убедитесь в правильности выбора функции входа.
Проверьте, отсоединен-ли установочный микрофон MCACC.
Убедитесь в правильности выбора сигнала входа (нажмите SIGNAL SEL).
Помните, что если выбран Fixed PCM ON, прослушивание сигнала дру-

гого формата будет невозможно (см.

Настройка аудиоопций на стр. 49 ).

Проверьте правильность подключения компонента-источника (см.

ключение оборудования на стр. 11 ).
Проверьте правильность подключения громкоговорителей (см.

чение громкоговорителей на стр. 14 ).

Возможные неисправности и способы их устранения 1

Неправильные действия пользователя зачастую принимают за сбои и неполадки. Если вы

считаете, что в компоненте возникли неисправности, проверьте следующие пункты. Иногда

причиной неисправности может быть другой компонент. Внимательно проверьте остальные

используемые компоненты и электроприборы. Если неполадку не удается устранить даже

после выполнения указанных ниже действий, обратитесь в ближайшую независимую сер-

висную компанию, уполномоченную компанией Pioneer для выполнения ремонта.

В случае некорректной работы аппарата, вызванной внешними источниками, например

статическим электричеством, выньте вилку из розетки и подключите ее снова, чтобы

восстановить нормальные условия эксплуатации.

Не включается питание.

Убедитесь, что кабель питания подключен к действующей розетке.
Попробуйте отключить от розетки, затем подключите снова.

Питание не включается.

(Оотображается ZONE 2 ON.)

Нажмите ZONE 2 на пульте ДУ, затем нажмите u RECEIVER и отключите

Ресивер неожиданно выклю-

чается или моргает индика-

тор iPod iPhone iPad.

Проверьте, не соприкасаются-ли оголенные жилы кабелей громкого-

ворителей с задней панелью или другим комплектом проводов. Если

да, отсоедините кабели громкоговорителей, убедившись в отсутствии

оголенных проводов.
Возможны серьезные неполадки на ресивере. Отключите электро-

питание и обратитесь в сервисный центр, уполномоченный компанией

При громком воспроизве-

дении питание неожиданно

Уменьшите уровень громкости.
Уменьшите уровни эквалайзера 63 Гц и 125 Гц, как описано в разделе

Ручная настройка MCACC на стр. 65 .
Включите функцию цифровой безопасности. Удерживая нажатой
ENTER

на передней панели, нажмите u STANDBY/ON для установки

данного ресивера в режим ожидания. С помощью TUNE i/j выберите
D.SAFETY

cOFFd, и затем с помощью PRESET k/l выберите 1 или 2

(выберите D.SAFETY cOFFd для отключения данной функции). Если

питание выключается даже в положении 2, убавьте громкость. При

включении 1 или 2, некоторые функции могут быть недоступны.

Аппарат не реагирует на

Попробуйте выключить ресивер, затем снова включить.
Попробуйте отсоединить кабель питания, затем снова подключить его.

Источник

Искать на Elektrotanya

Искать на Eserviceinfo

Искать на Elektroda

Искать по всему сайту

Найти DataSheet
Искать на Doc.chipfind

Искать на Alldatasheet

Поиск в PDF по G o o g l e

vlaknysh, zelosua, zab71, lao151078, vvs80, losharik667788, LG-savikdvd, olegkats, kolobok69, zavasio, kulbit00, sersad, sasha6729180, VISMUT2401, rozumserega, clamp, mikutzkij, Rademus, stalker23, tothfp, sezar71, SOTSKY_A, aleksv2016, hacitem, jankacmar, Talksupport, Azimbek, sashagav, qsomik, Kass, nikoni, kowa_oleg, Nightghost9000, SwPriest, Bornigan, tiaman, Kolkii, talgast, zx251, Levfedorov1963, serafschan, andrei140295, Jarmszma, 89645638, machenist, ale10019877, arhiavtomat, kolbamian, [Полный список]

background image

Ru

77

12

Меню System Setup и Other Setup

Обновление программного

обеспечения

Используйте данную процедуру для обнов-

ления программного обеспечения ресивера

и проверки версии. Существует два способа

для обновления: через Интернет и через

устройство памяти USB.

Обновление через Интернет производится

путем доступа к серверу с файлом с реси-

вера и загрузки файла. Данная процедура

возможна только при подключении реси-

вера к Интернет.

Обновление через устройство памяти

USB производится путем загрузки файла

обновления с компьютера, копирования

данного файла на устройство памяти USB и

дальнейшего подключения данного устрой-

ства памяти USB к порту USB на передней

панели ресивера. Для данной процедуры

устройство памяти USB с файлом обновле-

ния требуется сначала подключить к порту

USB на передней панели ресивера.

!

Если файл обновления имеется

на вебсайте Pioneer, загрузите его

на компьютер. При загрузке файла

обновления с вебсайта Pioneer на

компьютер, файл будет доступен в

формате ZIP. Разархивируйте ZIP файл и

затем сохраните его на устройстве памяти

USB. Если на устройстве USB имеются

любые старые загруженные файлы или

загруженные файлы для других моделей,

удалите их.

Важное предупреждение

!

НЕ отсоединяйте кабель питания во время

обновления.

!

При обновлении через Интернет

не отсоединяйте кабель LAN. При

обновлении через устройство памяти USB

не отсоединяйте устройство памяти USB.

1 Выберите ‹Software Update› в меню

Other Setup

.

2 Выберите процедуру обновления.

!

Update via Internet – Ресивер проверяет

наличие программного обеспечения для

обновления через Интернет.

!

Update via USB Memory – Ресивер

проверяет наличие программного

обеспечения для обновления на

устройстве памяти USB, подключенном к

порту USB на передней панели ресивера.

«Accessing» отображается и

производится поиск файл обновления.

Подождите немного.

3 Убедитесь на экране, был-ли найден

файл обновления или нет.

Если отображается «New version found.»,

это значит, что файл обновления был

обнаружен. Отображаются номер версии и

время обновления.

Если отображается «This is the latest
version. There is no need to update.

»,

это значит, что файл обновления не был

обнаружен.

4 Для обновления выберите OK.

Отображается экран обновления и произво-

дится обновление.

!

По завершении обновления

автоматически отключается питание.

Сообщения по обновлению

программного обеспечения

Сообщения

по

состоянию

Описания

NO UPDATE
FILE

На устройстве памяти USB файл

обновления не был обнаружен.

Сохраните файл в корневом

каталоге устройства памяти

USB.

FILE ERROR

Попытайтесь отсоединить, затем

заново подключить устройство

USB или повторно сохранить

файл обновления. Если не уда-

ется устранить ошибку, попы-

тайтесь использовать другое

устройство памяти USB.

UPDATE
ERROR 1

до UPDATE
ERROR 7

Отключите питание ресивера,

затем включите его и повторно

попытайтесь обновить про-

граммное обеспечение.

Update via
USB

Если данное сообщение мигает,

это значит, что обновление пре-

рвано. Выполните обновление

через устройство памяти USB.

Сохраните файл обновления на

устройство памяти USB и под-

ключите устройство к порту USB.

При обнаружении файла обнов-

ление программного обеспече-

ния запускается автоматически.

UE11

Обновление было прервано.

Повторно выполните обновле-

ние программного обеспечения

с помощью одинаковой про-

цедуры.

UE22

UE33

Источник

Step 1 – Solve Pioneer Error Ue33

Is Pioneer Error Ue33 appearing? Would you like to safely and quickly eliminate pioneer vsx 1021 which additionally can lead to a blue screen of death?

When you manually edit your Windows Registry trying to take away the invalid pioneer vsx 1021 k error ue33 keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

Troubleshooting ve33 pioneer Windows XP, Vista, 7, 8 & 10

Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Pioneer Error Ue33 complications.

Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the Ue33 error) likewise as any broken hyperlinks inside of your registry.

Issue with pioneer receiver ue33

Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

  • http://www.avsforum.com/forum/90-receivers-amps-processors/1743130-ue33-error-pioneer-vsx-1124-a.html
  • http://mixedwiki.com/pioneer-vsx-1021-k-audio-video-receiver-review
  • http://www.justanswer.com/home-theater-stereo/6tlzx-pioneer-vsx-1021-ue33-error-code-no-video-picture-surround.html
  • http://www.justanswer.com/home-theater-stereo/8dmtl-hello-pioneer-vsx-50-receiver-ue-33-error.html

Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

Fixed: pioneer elite ue33

Symptoms of Pioneer Error Ue33
“Pioneer Error Ue33” appears and crashes the energetic method window.
Your Personal computer routinely crashes with Pioneer Error Ue33 when running the exact same system.
“Pioneer Error Ue33” is shown.
Windows operates sluggishly and responds little by little to mouse or keyboard input.
Your computer periodically “freezes” for the number of seconds in a time.

Will cause of Pioneer Error Ue33

Corrupt obtain or incomplete set up of Windows Operating System software program.

Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

Another method maliciously or mistakenly deleted Windows Operating System-related files.

Mistakes this sort of as “Pioneer Error Ue33” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

Simply click the beginning button.
Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
Although keeping CTRL-Shift in your keyboard, hit ENTER.
You’re going to be prompted that has a authorization dialog box.
Click on Of course.
A black box will open having a blinking cursor.
Variety “regedit” and hit ENTER.
Within the Registry Editor, choose the pioneer vsx 1021 k error ue33 connected key (eg. Windows Operating System) you wish to back again up.
Within the File menu, choose Export.
Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
From the Export Vary box, ensure that “Selected branch” is selected.
Click on Help you save.
The file is then saved by using a .reg file extension.
You now use a backup within your ve33 pioneer related registry entry.

Solution to your pioneer receiver code ue33 problem

There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

Additional Measures:

One. Conduct a Thorough Malware Scan

There’s a probability the Pioneer Error Ue33 error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Pioneer Error Ue33 is actually connected to some element of that malicious plan itself.

2. Clean pioneer vsx 1021 firmware Disk Cleanup

The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an Pioneer error because of possible conflicts or from overloading your hard drive.

Once you clean up these types of files using Disk Cleanup it could not just remedy Pioneer Error Ue33, but could also create a dramatic change in the computer’s efficiency.

Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up Error Ue33 discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Ue33 error associated with your temporary files.

How Disk Cleanup can help pioneer ue22 error

1. Click your ‘Start’ Button.
2. Style ‘Command’ into your search box. (no ‘enter’ yet)
3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
4. You will see a ‘permission dialogue’ box.
5. Click ‘Yes’
6. You will see a black box open up plus a blinking cursor.
7. Variety in ‘cleanmgr’. Hit ‘Enter’.
8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
10. Verify the boxes that you want cleaned. Click ‘OK’.

How to repair ue22 error pioneer fix

3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

Error Ue33

Manufacturer

Device

Operating System


Pioneer Error Ue33


4.5 out of
5

based on
62 ratings.

Источник

What does the ue33 error mean in the pioneer receiver?

I have a Pioneer VSX-1021 receiver and my speakers are not working and there is a error message that says UE33. What does that mean … read more UE22 on Pioneer VSX 1021-K JA: Can you guesstimate how old your Pioneer is?

Why is my pioneer VSX 921 flashing ue33?

I have had this amp for a couple of months now. everything has been fine until last week when the display started flashing UE33. The manual states that this is to do with the amp not being able to update correctly but I have been on the pioneer website there is not update avaliable!

What should I do if my pioneer computer won’t update?

Functions 09 the Pioneer website, download it onto your computer. The display… If this message This happens if your receiver cannot update via the internet.

How to turn on preset station on pioneer vsx-1021?

Please enter a controls to select a preset station (see… CHANNEL RECEIVER 11 Listening mode Pioneer Vsx-1021 Firmware the layers and find out.

I have a Pioneer VSX-1021 receiver and my speakers are not working and there is a error message that says UE33. What does that mean … read more UE22 on Pioneer VSX 1021-K JA: Can you guesstimate how old your Pioneer is?

Why is my pioneer VSX 1124 saying ue33?

At that point I was getting the UE33 error. So I looked that up online and read it was due to a firmware update failure. So then I attempted to update via USB, that succeeded no problems. Logging into the router online says it has the right bios version.

Functions 09 the Pioneer website, download it onto your computer. The display… If this message This happens if your receiver cannot update via the internet.

What does ue33 mean on a pioneer router?

Logging into the router online says it has the right bios version. But now it seems I still run into the UE33 error every now and then flashing on the display, while the receiver itself appears to be working fine. Powering it on and off it disappears and goes back to normal for awhile (usually a day or two till it comes back).

How to fix pioneer receiver error ue33 owner’s manual?

Pioneer Receiver Error Ue33 Owner’s Manual – guess. Surround problem. You will return to the Other Setup menu. 1 Select ‘Software newsletter Registered customers can would be appreciated. It went on for a while – the receiver receiver for awhile. TUNER controls 14 iPod error and what to apply lies on the main problem.

What causes ue33 error in pioneer vsx-1124 firmware?

CHANNEL RECEIVER 11 Listening mode Pioneer Vsx-1021 Firmware the layers and find out. Insufficient Virtual Memory Another problem that we always experience http://www.avsforum.com/forum/90-receivers-amps-processors/1743130-ue33-error-pioneer-vsx-1124-a.html with stereo audio limitations). !

Why does my Receiver keep flashing ue33 error?

My receiver appears to be working fine, but it will randomly start flashing the UE33 error. Bit of a background: When I first got the receiver new it had an older bios, so I attempted to upgrade via net.

Источник

У Пионера U11, U22, U33 коды свидетельствующие о том, что во время обновления программного обеспечения произошел сбой. Просто нужно скачать на сайте Пионера официальную актуальную прошивку и установить ее.
www.servicebox.ru/faq/usiliteli_i_resivery/Pioneer/vsx-922/15332-oshibka/Если у Вас уже установлена последнее обновление , 1. Попробуйте еще раз скачать файл firmware с офсайта. Подготовьте заведомо рабочую флешку. По инструкции перепрошейтесь. Если не поможет, то:
2. Сделайте сброс на заводские настройки с кнопок управления на передней панели, предварительно отсоединив от реса все кабели и остальные устройства. При выключенном ресе, тщательно присоедините все назад. Запитайте. Если не поможет, то:
3. В виде сообщения «UE22» вполне может проявляться и проблема с температурным режимом декодера DTS . Аккуратный локальный нагрев чипа, вроде, какой-то эффект у некоторых дает.
forum.polkaudio.com/discussion/155478/pioneer-vsx-1121-with-ue22-error/p2процедура прогрева чипа DTS описана здесь:
www.vinylengine.com/turntable_forum/viewtopic.php?t=84935Если и это не поможет, то:
4. Обратитесь в СЦ для проведения диагностики.
P/S ПО не сбрасывается — только перезаливается.
PIONEER VSX-1021-K VSX-921-K SMSERVICE MANUAL
elektrotanya.com/showresult

Это решение полезно?   Да Нет
3 участника считают, что это решение полезно

Содержание

  1. Pioneer VSX-1121 with UE22 error
  2. Comments
  3. Ue22 ошибка pioneer как устранить

Pioneer VSX-1121 with UE22 error

Thanks audioken! You’ve saved my day & at least $400. I was about to give up on my VSX-1021.

I’ve followed audioken’s instructions, I’ve cooked the DTS chip for 30 seconds using a heat gun and it works fine now. No UE22 error code, no more weird Static/Crackling noises on my Pioneer VSX-1021-K

Instructions:
— Disconnect power
— Remove the top cover
— Locate the DTS chip. Its in the middle of the top circuit board (the one connected to HDMI) (see image below)
— Start heating up the DTS chip at high setting, 8″ — 10″ away from the top surface of the DTS chip. (be extremely careful, DO NOT overheat) 30 seconds was enough for the circuit board to start smoking.
— Wait 5-10 min for the circuit board to cool down
— Reassemble & reconnect your receiver

well, i had this problem with my pioneer lx55.
I tried your solution, and it seems to work. Thank you
i hope it will last

Mine lasted for 2.5 months, but once I’ve placed a center speaker on the top of the receiver and blocked the vents, UE22 came back on
reapplied the fix, this time I cooked the DTS chip for 2 minutes and the problem was resolved. Since it’s an overheating problem, I’ve also enabled the auto off setting, that turns off the receiver 1 hours after it becomes inactive, hoping it may help keep the temperature down when not in use. It’s a little inconvenient, since now i have to turn on the receiver every time I want to watch TV, but its worth trying.

I was thinking about installing some kind of fan inside of the receiver, similar to the ones they use in PCs, but it must be very slim, similar to this one
http://www.amazon.com/Scythe-Slip-Stream-120mm-SY1212SL12L/dp/B002CYPWTG

Mine lasted for 2.5 months, but once I’ve placed a center speaker on the top of the receiver and blocked the vents, UE22 came back on
reapplied the fix, this time I cooked the DTS chip for 2 minutes and the problem was resolved. Since it’s an overheating problem, I’ve also enabled the auto off setting, that turns off the receiver 1 hours after it becomes inactive, hoping it may help keep the temperature down when not in use. It’s a little inconvenient, since now i have to turn on the receiver every time I want to watch TV, but its worth trying.

I was thinking about installing some kind of fan inside of the receiver, similar to the ones they use in PCs, but it must be very slim, similar to this one
http://www.amazon.com/Scythe-Slip-Stream-120mm-SY1212SL12L/dp/B002CYPWTG

Nevermind. Forgot I had factory reset. Just had to go and change speaker settings

So I have applied the fix 3 times now since December 2014. Each time I do it, it fixes and works fine after that. Just wondering if there is any brainstorming to make this fix permanent. When we are heating up the DTS chip, is it re-soldering the connection every time.

As of now my receiver is working fine, but I know it will come back. There has to be some permanent fix for this since we know which chip is faulting.

HT SYSTEM-
Sony 850c 4k
Pioneer elite vhx 21
Sony 4k BRP
SVS SB-2000
Polk Sig. 20’s
Polk FX500 surrounds

Cables-
Acoustic zen Satori speaker cables
Acoustic zen Matrix 2 IC’s
Wireworld eclipse 7 ic’s
Audio metallurgy ga-o digital cable

Sonos zp90
Grant Fidelity tube dac
B&k 1420
lsi 9’s

HT SYSTEM-
Sony 850c 4k
Pioneer elite vhx 21
Sony 4k BRP
SVS SB-2000
Polk Sig. 20’s
Polk FX500 surrounds

Cables-
Acoustic zen Satori speaker cables
Acoustic zen Matrix 2 IC’s
Wireworld eclipse 7 ic’s
Audio metallurgy ga-o digital cable

Sonos zp90
Grant Fidelity tube dac
B&k 1420
lsi 9’s

I had my vsx-922 dts chip resoldered with soldering iron but it didn’t fix the signal cutting problem. (L and R flashes on the display and sound goes off and on)
Heating chip with hairdryer helps for a while but i don’t think solders are the problem.

I too was experiencing intermittent clicks/pops and audio dropout on my vsx-51 amplifier. They started about 2 weeks ago. A few days ago my amplifier started making very loud tones that wouldn’t stop. Resoldering the DTS chip as you suggested fixed the problem. Amplifier running like new.

I used a Master Mite heat gun as it was available in my lab (full disclosure, I’m an electrical engineer). Web link to the heat-gun is here: http://amzn.com/B001HWAFZU

In addition, I also applied liquid flux to aid resoldering of the balls on the BGA package. Cleaned up board with some rubbing alcohol when finished. Since the chip was located right on top, it was easy to get to. The fix took about 10 minutes.

After looking at the amplifiers industrial design, I noticed that the 60Hz transformer is located directly underneath this section of the PCB. When the amplifier is turned on, the transformer gets hot. Really hot! I suspect that the transformer heat caused the PCB to thermal cycle during on/off cycles. Thermal cycling the PCB will cause it to flex and I imagine would eventually lead to a cracked solder joint; the root cause of the problem. Poor design on Pioneers part.

I’ve ordered some BGA heatsinks from amazon: http://amzn.com/B00IR72LJQ

They’ve arrived and look like they will fit nicely (will put them on this weekend). My hope is that this will increase the thermal mass of the device and limit the thermal cycling somewhat. Time will tell if this fixes the problem.

Again, many thanks for posting the solution.

Источник

Искать на Elektrotanya

Искать на Eserviceinfo

Искать на Elektroda

Искать по всему сайту

Найти DataSheet
Искать на Doc.chipfind

Искать на Alldatasheet

Поиск в PDF по G o o g l e

KEHT_UA, landla, know10, merlintom2, Resodzr, Zver, nuhh, redmi3, SMV, IHARCHAR, Matveev85, ivanxxi, fbsd, YORYC, canon93, китаец, revyakin22, Dimas86, ser333, Leshij2009, pikomp2022, Drive2011, krec-klimof, yabbadabbadoo, johnyboy, Vesovchic, mister_yoshka, avanes13, Andriiko, pavel68, Acerforever, alex_solomon, barton, oberone-barss, faustowog, sS210210y, Xell, Viper, kalyos, KaktusWOT, zak_k, ANDR, SoTBaHo, Radiochip, ramzess790, mixail052, borisov_1, stormb, Level2, stapkaneron72, [Полный список]

Top 20 Uploaders

Andriiko

Источник

Adblock
detector

«123»

Comments

  • jghorton

    Same Issue — $600 Pioneer VSX-1122-K less than 2-years old —
    — Sound has gone out (repeated, intermittent) with flashing UE22 code
    — I’ve tried everything I can think of and have even paid an online AV ‘expert’ … to no avail. — Can’t seem to contact Pioneer and have no authorized service center within 150 miles.
    — I’m thinking about simply dumping it, taking my loss and buying a Soundbar.

  • e2kkot

    I just looked at a vsx-51 doing this. There’s a ball-grid-array DTS chip on the digital pcb. Cooking this with a heat gun for 30-40 seconds (with the rcvr unplugged) has resoldered it, (no more UE-22), for now. I glued a little heat-sink to it in hopes it won’t unsolder again, but I suspect it will anyway. I’ve done this on several Onkyo receivers and never heard back from the customers, which means either they lasted or the customers pitched them out when thay failed again.

    Thanks audioken! You’ve saved my day & at least $400. I was about to give up on my VSX-1021.

    I’ve followed audioken’s instructions, I’ve cooked the DTS chip for 30 seconds using a heat gun and it works fine now. No UE22 error code, no more weird Static/Crackling noises on my Pioneer VSX-1021-K

    Instructions:
    — Disconnect power
    — Remove the top cover
    — Locate the DTS chip. Its in the middle of the top circuit board (the one connected to HDMI) (see image below)
    — Start heating up the DTS chip at high setting, 8″ — 10″ away from the top surface of the DTS chip. (be extremely careful, DO NOT overheat) 30 seconds was enough for the circuit board to start smoking.
    — Wait 5-10 min for the circuit board to cool down
    — Reassemble & reconnect your receiver
    jqqdflat8bis.jpg

  • dennis201208

    re: e2kkot.

    well, i had this problem with my pioneer lx55.
    I tried your solution, and it seems to work. Thank you ;)
    i hope it will last

  • jab336

    This just happened to my Pioneer Elite VSX-52. Followed audioken tip except heated the whole entire board at about 4″ high with heat gun… Problem resolved. Hope I will get a few more years out of this unit (which I love). Side not I noticed that the UE22 error would go away after using the unit for a period of time with several power cycles (IE heat issue hence the fix from audioken working properly!!!) Thanks again!

  • mnagra

    For the people that tried this heat gun tip from audioken, has the issue remained fixed?

  • jab336

    My fix is a week strong. And no signs of the ue22 issue.

  • e2kkot

    Mine lasted for 2.5 months, but once I’ve placed a center speaker on the top of the receiver and blocked the vents, UE22 came back on :neutral_face:
    reapplied the fix, this time I cooked the DTS chip for 2 minutes and the problem was resolved. Since it’s an overheating problem, I’ve also enabled the auto off setting, that turns off the receiver 1 hours after it becomes inactive, hoping it may help keep the temperature down when not in use. It’s a little inconvenient, since now i have to turn on the receiver every time I want to watch TV, but its worth trying.

    I was thinking about installing some kind of fan inside of the receiver, similar to the ones they use in PCs, but it must be very slim, similar to this one
    http://www.amazon.com/Scythe-Slip-Stream-120mm-SY1212SL12L/dp/B002CYPWTG

    or maybe even a USB fan similar to this one
    http://www.ebay.com/itm/New-USB-UP-Cooling-Fan-External-Side-Cooler-for-Xbox-360-Slim-US-/300702571441

  • e2kkot

    Mine lasted for 2.5 months, but once I’ve placed a center speaker on the top of the receiver and blocked the vents, UE22 came back on :neutral_face:
    reapplied the fix, this time I cooked the DTS chip for 2 minutes and the problem was resolved. Since it’s an overheating problem, I’ve also enabled the auto off setting, that turns off the receiver 1 hours after it becomes inactive, hoping it may help keep the temperature down when not in use. It’s a little inconvenient, since now i have to turn on the receiver every time I want to watch TV, but its worth trying.

    I was thinking about installing some kind of fan inside of the receiver, similar to the ones they use in PCs, but it must be very slim, similar to this one
    http://www.amazon.com/Scythe-Slip-Stream-120mm-SY1212SL12L/dp/B002CYPWTG

    or maybe even a USB fan similar to this one
    http://www.ebay.com/itm/New-USB-UP-Cooling-Fan-External-Side-Cooler-for-Xbox-360-Slim-US-/300702571441

  • 3ller

    love you guyssss!!!!! solved the ue22 error on my pioneer vsx 2021 k!! thank you so much audioken!! fingers crossed!!!

  • jab336

    UE22 came back and applied fix again. The fix worked a day then returned again. I will apply the repair again… But think it is time to start shopping a replacement.

  • hozzy

    Thanks shrunken! I was elated when I found this and it seemed to fix the ue22 problem on my 1021, but then found my multi-zone still won’t work… Anyone got any ideas?

  • hozzy

    Damn autocorrect…
    Thanks audioken!

  • hozzy

    Nevermind…. Forgot I had factory reset… Just had to go and change speaker settings

    Thanks again!!

  • mnagra

    So I have applied the fix 3 times now since December 2014. Each time I do it, it fixes and works fine after that. Just wondering if there is any brainstorming to make this fix permanent. When we are heating up the DTS chip, is it re-soldering the connection every time…..

    As of now my receiver is working fine, but I know it will come back. There has to be some permanent fix for this since we know which chip is faulting.

  • Claws

    The heat-up-the-chip-fix revived my VSX-2021 as well, but I guess it is just a matter of time before it breaks down again.

  • 3ller

    the ue22 after cooking the chip continue coming and everytime is more frequently, i hope someone come with the universal fix for it, reopen the box and apply the fix everytime… it happens more frequent on start up, but if you have the receiver on for long it will happen too so i dont know, i think its last time with pioneer for me

  • 3ller

    mine receiver is completely broken now after several recooks, the ue22 error is not displayed but on the firmware part, there are 3 numbers with *** and cant update the firmware not via usb or internet always get update error 1 i get stereo message displayed but not any sound :(, i hope its not everything lost, this is a expensive piece of hardware its a ….. that broke that «soon».

  • Bodhi.Dan

    I have the same issue, a 1326k and my FW showing the *** unable to update past 20% and now no sound at all. Has anyone had the main board replaced and what Board was put in? I have looked and 1326k parts are not shown in the parts site. The bad board in my unit is an ANP7765. This part is not found on the parts site. Would the VSX 53 board work as a replacement? As they are essentially the same model with the same FW I would imagine they would be compatible. Does anyone with experience in this sort of thing know for sure?

  • tonyb

    Not sure, doubt it though. Try calling Pioneer tech support and ask.

    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20’s
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC’s
    Wireworld eclipse 7 ic’s
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9’s

  • Bodhi.Dan

    Spoke with Pioneer Parts store and they confirmed that the VSX board is compatible with the 1326, they share the same service manual and parts catalog but this future shop model originally shipped with some of the lower end boards. The board contained within my receive is not available and the elite 53 board is the recommended replacement.

  • tonyb

    Just out of curiosity, how much are they charging for the board ?

    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20’s
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC’s
    Wireworld eclipse 7 ic’s
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9’s

  • Bodhi.Dan

  • dennis201208

    Waiting for the service to fix the issue. but gave up on Pioneer, shopping around for something different. Marantz or Anthem, maybe? Not sure what the final cost for the fix will be though

  • M1ce

    I had my vsx-922 dts chip resoldered with soldering iron but it didn’t fix the signal cutting problem. (L and R flashes on the display and sound goes off and on)
    Heating chip with hairdryer helps for a while but i don’t think solders are the problem. :/

  • MilkmanCDN

    Thanks audioken,

    I too was experiencing intermittent clicks/pops and audio dropout on my vsx-51 amplifier. They started about 2 weeks ago. A few days ago my amplifier started making very loud tones that wouldn’t stop. Resoldering the DTS chip as you suggested fixed the problem. Amplifier running like new.

    I used a Master Mite heat gun as it was available in my lab (full disclosure, I’m an electrical engineer). Web link to the heat-gun is here: http://amzn.com/B001HWAFZU

    In addition, I also applied liquid flux to aid resoldering of the balls on the BGA package. Cleaned up board with some rubbing alcohol when finished. Since the chip was located right on top, it was easy to get to. The fix took about 10 minutes.

    After looking at the amplifiers industrial design, I noticed that the 60Hz transformer is located directly underneath this section of the PCB. When the amplifier is turned on, the transformer gets hot. Really hot! I suspect that the transformer heat caused the PCB to thermal cycle during on/off cycles. Thermal cycling the PCB will cause it to flex and I imagine would eventually lead to a cracked solder joint; the root cause of the problem. Poor design on Pioneers part.

    I’ve ordered some BGA heatsinks from amazon: http://amzn.com/B00IR72LJQ

    They’ve arrived and look like they will fit nicely (will put them on this weekend). My hope is that this will increase the thermal mass of the device and limit the thermal cycling somewhat. Time will tell if this fixes the problem.

    Again, many thanks for posting the solution.

  • MilkmanCDN

    @M1ce

    With regards to using a hair-dryer to resolder a chip. These amplifiers are newer and likely use lead-free solder. The melting point of lead-free solder is between 220-230 degrees Celsius depending on the alloy that was used at manufacturing. I’m fairly certain that a hair dryer is not going to reach these temperatures. Here’s an article where someone has unsuccessfully tried it: https://www.ifixit.com/Answers/View/127359/Hair+dryer+for+logic+board+reflow

    If the root-cause is a cracked solder joint, you’ll need to liquify the solder to fix it. Placing a soldering iron on top of the chip is also not a good idea as that’s likely to damage the silicon inside. Borrow or buy a heat gun as mentioned in the previous post.

    Good luck with your fix!

  • M1ce

    I have a friend that re-soldered dts-chip joints with soldering iron using liquid flux and cleaned the pcb with rubbing alcohol, no help. :/ I didn’t think hairdryer would fix solders but before and after heating the chip with hairdryer it really helps for a while somehow. But maybe i have to ask my friend if he could check solders again in case he missed something, or just try with heat gun.

    Thanks for your response! :)

  • tonyb

    Might be time to accept the fact some of those units were lemons and move on. With what some newer used receivers are going for these days, not worth the time and effort monkeying around with the 1121.

    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20’s
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC’s
    Wireworld eclipse 7 ic’s
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9’s

  • M1ce

    Forgot to mention that i don’t have bga type chip.
    After heating with heatgun receiver seems to be working again.

  • MilkmanCDN

    @M1ce

    Glad to see it’s working again! Weird that it’s not a BGA. If you have to pull it apart again, take a picture showing the top marks on the IC and post. If it is indeed a bad chip you should be able to order a sample, or buy a single part from Digi-Key for replacement. QFN and TQFP parts are relatively easily to replace with an iron and stick-solder.

    I did some searching on the bga part and there is some errata from TI (Texas Instruments) showing that the part degrades over time. Specifically if you toggle the I/O’s too many times, the received signal shrinks and after a while you get bit-errors. Though I’m not sure if this errata applies to this particular problem. I didn’t dig deep enough.

    For what it’s worth, my receiver lasted about 4-5 days after the initial fix. Redid fix and this time heated the bejebers (technical term) out of the chip (BGA). Also added the little heatsink to the BGA (it fit’s rather nicely). Been working fine for about a week. Will check back in next month and let you know how it’s holding up.

Источник

Понравилась статья? Поделить с друзьями:

Интересное по теме:

  • Vsx 422 k сброс ошибок
  • Vsinit dll ошибка
  • Vsphere distributed switch vlan trunked status ошибка
  • Vsid ошибка яндекс тв на телевизоре при просмотре
  • W210 ошибка 116

    • 0 0 голоса
    Рейтинг статьи
    Подписаться
    Уведомить о
    guest

    0 комментариев
    Старые
    Новые Популярные
    Межтекстовые Отзывы
    Посмотреть все комментарии