Volume is too big ошибка при форматировании

Why the Volume Is Too Big for FAT32 Error Occurs

FAT32 refers to the file allocation table as a disk file management method that uses 32-bit binary number record management. FAT32 is developed from FAT and FAT16.

The advantage is that it has good stability and compatibility, is fully compatible with Win 9X and previous versions and is easy to maintain. The disadvantage is that the security is poor, and can only support up to 32GB partitions, and a single file can only support up to 4GB.

Although there are now better NTFS and exFAT file systems (exFAT vs FAT32 vs NTFS), many USB flash drives or specific device disks with a capacity greater than 32GB can only support FAT32. As a result, users will encounter «The volume is too big for FAT32» or «Virtual Disk Service error: The volume size is too big» problem when creating or formatting a partition to FAT32.

Then, how to solve the volume is too big for FAT32 error? Are there other ways to format a 64GB or 128GB USB or hard drive in FAT32? Here is the full guide to help you out. Let’s do it together.

Fix The Volume Is Too Big for FAT32 with Command Prompt

Windows Disk Management or File Explorer won’t allow you to create or format a FAT32 volume larger than 32GB, you can only choose NTFS or exFAT for the file system.

But there is a workaround to format FAT32 larger than by using the Diskpart utility in Command Prompt. Check the following steps.

Note: You still can’t format a volume that is larger than 1TB to FAT32 in CMD.

Step 1. Type cmd in the search box in Windows 11/10. Right-click on it and choose «Run as administrator».

Step 2. In the command prompt, type diskpart and press «Enter».

Step 3. Type the following command lines in order and press «Enter» after each.

list disk
select disk + disk number ( e.g. select disk 2)
list partition
select partition + volume number (e.g. select partition 2)
format fs=fat32

Another FAT32-related issue you may have when you transfer a single file larger than 4GB into the FAT32 partition is «File Is Too Large for Destination File System», fix it with the online tutorial.

Format a Drive Larger Than 32GB to FAT32 with PowerShell

You can also format a USB or HDD larger than 32GB to FAT32 with Windows PowerShell.

Step 1. Click the Search button, and type PowerShell.

Step 2. Right-click Windows PowerShell from search results, and choose «Run as administrator».

Step 3. Type Format /FS:FAT32 o: and hit Enter. O is the driver letter, you can replace it.

Step 4. Wait for the process to finish. Type exit when it’s done.

Format a Drive to FAT32 Without Limit by Using a Free FAT32 Format Tool

If the Command Prompt also fails to format a large disk to FAT32 and showing the volume is too big for FAT32, you can resort to a free FAT32 format tool.

EaseUS Partition Master Free is powerful and reliable Windows 11/10 partitioning software that provides one-stop disk partition management solutions.

Download EaseUS Partition Master Free to format a hard drive, USB flash drive, or an external hard drive to FAT32 without limitation.

Step 1. Launch EaseUS Partition Master, right-click the partition you intend to format and choose «Format».

Step 2. In the new window, enter the Partition label, choose the FAT32/EXT2/EXT3/EXT4 file system, and set the cluster size according to your needs, then click «OK».

Step 3. Then you will see a warning window, click «Yes» in it to continue.

Step 4. Click the «Execute 1 Task(s)» button in the top-left corner to review the changes, then click «Apply» to start formatting the partition to FAT32/EXT2/EXT3/EXT4.

Fix The Volume Is Too Big for FAT32 by Converting NTFS to FAT32

Instead of formatting a hard drive with data from NTFS or other file systems to FAT32, you can directly convert to FAT32 without formatting.

Free EaseUS partition management software has comprehensive partition converting options. It enables you to convert FAT32 to NTFS or NTFS to FAT32 without data loss, convert disk style from MBR to GPT or GPT to MBR, change dynamic disk to basic disk and vice versa, etc.

Take the guide below to convert a USB drive larger than 32GB from NTFS to FAT32 without losing any data.

Step 1. Right-click target device partition and select «Advanced» > «Convert to FAT».

Step 2. When the check process completes, click «Proceed» to start NTFS to FAT32 conversion.

Step 3. Click «Apply» to save all changes.

Fix The Volume Is Too Big for FAT32 Error Easily

The volume is too big for FAT32 or virtual disk service error: the volume size is too big will arise when you attempt formatting a 64GB flash drive or 128GB, 500GB HDD.

To format a large storage device to FAT32, you have several efficient approaches:

• Use Diskpart in Command Prompt
• Use EaseUS FAT32 free format tool
• Convert NTFS to FAT32

As the CMD solution may be difficult for the average user, we highly recommend you try EaseUS Partition Master Free to format a drive to FAT32 with a graphic user interface. Besides, you can choose to directly convert NTFS to FAT32 without data loss.

Quick Navigation:

If you format a large partition or USB hard drive to FAT32 file system under Windows, you can only see NTFS or exFAT in the drop list for file system section. Windows can format a disk which is larger than 32GB to FAT32 with DOS command prompt. However, if the hard drive is 1TB or larger, the formatting will give error «The volume is too big for FAT32».

Most computer users own more than one hard drives or external drives. Though it’s recommended to format disk into NTFS, some users still want to format removable disk to FAT32 in order to transfer files from Mac.

Here is a real story told by customers:

«I’ tried formatting my 500GB external hard drive to FAT32 so that I can use it on PS3. I tried on Windows 7 computer, but FAT32 is not available. I googled this issue online. All advise to format hard disk with command prompt. But that didn’t work and gave error ‘The volume is too big for FAT32′ after it hit 90 percent. Is there other solution out there that can help me?»

Limitations of FAT32 file system

• FAT32 is flexible and robust file system providing enhancements over previous FAT file system, and yet it has a couple of limitations. This part explains limitations existing in FAT32 file system with Windows operating system, which can account for the volume too big issue.
• Clusters can’t be larger than 64KB; otherwise some application won’t be able to calcite disk space correctly.
• A FAT32 volume must contain at least 65,527 clusters. Users can’t increase cluster size on a volume using FAT32 file system format so that clusters is less than 65,527.
• The maximum possible cluster number on a FAT32 volume is 268,435,445. There is a maximum of 32KB per cluster with the space demanded for file allocation table. Thus the maximum disk size is about 8TB.
• Users can’t decrease cluster size for FAT32 volume, hence FAT size is larger than 16MB less 64KB.
• You can’t format a volume whose size is larger than 32GB using FAT32 file system in Windows. If you want to format a volume larger than 32GB, use NTFS file system. Note: if you try the formatting, the process will fail in the end with error: Logical Disk Manager: Volume size too big.
• A file larger than 4GB can be created or stored on a FAT32 volume. If you copy a file larger than 4GB, you’ll get error »
  File is too large for the destination file system
  «.

Backup data

Before attempting to change the storage device format, be sure to perform a data backup. Formatting a storage device will delete all data within it, so backing up files is very important. You can use Isoo Backup or DiskGenius for backup.

Solutions to fix «The volume is too big for FAT32»

There are several methods to format HDD or USB to FAT32 even when it is larger than 32GB. You can use either Command Prompt or third-party FAT32 format tool to change file system to FAT32. If you are not comfortable using command line, the format tool is a good choice, as it is more easy to use. In this guide, we are going to use format using both Command Prompt and FAT32 formatter.

Important: Formatting a drive will erase all data, thus please back up all data before formatting your disk.

Method 1: Format USB / HDD to FAT32 with Command Prompt

Step 1. Open Command Prompt. Click Start button and type cmd in searing box. Right click the item in the searching result and select Run as administrator. Windows users can open it by right-clicking Start menu and select «Command Prompt (Admin)». If you are prompted to provide password or confirmation, then enter password or click OK.

Step 2. type the command format /FS:FAT32 G: and hit Enter key. In this command, the letter G is the drive letter of the disk you want to format and it may be other letters on your computer. Replace G with the correct drive letter which can be seen in Windows Explorer. Make sure correct drive letter is entered here; otherwise the process will format wrong partition.

Step 3. Confirm formatting by typing Y. It’ll prompt with information «All data on non-removable disk drive will be lost! Proceed with Format».

Step 4. Wait for the formatting to complete. The process may take some time, which mainly depends on operating system and disk speed. However, if the process is too slow and you don’t want to wait, you can try the solution on Method 2.

Method 2: Format disk with free FAT32 format tool

DiskGenius is powerful and free partition manger which allows you to format hard drives and USB drives to FAT32, exFAT, NTFS or Ext4 in Windows XP/vista/7/8/10/11. With this format tool you can perform quick or slow format, set cluster size, specify drive letter, etc. The easy-to-use UI makes formatting an easy task.

Step 1. Connect the disk to be formatted to a Windows-based computer.

Step 2. Download, install and launch DiskGenius. If it is run from your computer for the first time, check option «I have read and agreed the license agreements of this product» and click OK.

Step 3. Locate and select the volume you want to format and right-click it to select «Format Current Partition».

Step 4. Select FAT32 from the drop-down list and click «Format» button. As to cluster size you can use the defaulted value if you do not have special requirement.

Step 5. Click Yes on the message box saying «Are you want to format the partition (or volume)? All files on this partition will be lost. Select Yes to continue.» Wait for a second and the formatting completes.

Conclusion

The «The Volume Is Too Big for FAT32» error is a flag indicating that the FAT32 format storage device cannot handle files larger than 4GB. You can solve this problem by formatting the storage device as exFAT or NTFS, or using DiskGenius Free to format the drive to FAT32. Please make sure to back up the data in the storage device before changing its format. We hope this article can help you solve this problem.