Vmware usb arbitration service ошибка 2

VMware USB arbitration service cannot be started

After the upgrade of VMware Workstation 7.1.5 on a host Windows 7 x 64, I now receive the following error message at the launch of the virtual computer:

«Welcome the connection of USB devices disabled: connecting to VMware USB arbitration service was not successful.» Please check the status of this service in the Microsoft Management Console. »

Examinging the service in the console, it shows installed but not started. It is set to automatic. Failed attempts to start the service through the console:

«Windows failed to start the VMware USB Arbitration Service on Local computer.  Error 2: the system cannot find the specified file. »

The path to the file is «C:\Program Files (x 86) \Common» and I checked that this file exists. Manual tries to run this executable from the command prompt seems to do nothing.

C:\Program Files (x 86) \Common Files\VMware\USB > dir
Volume in drive C is OS
Volume serial number is EA55 — B 6, 57

Directory of C:\Program Files (x 86) \Common Files\VMware\USB

17/11/2011-16:10 < DIR >.
17/11/2011-16:10 < DIR >…
01/06/2011-14:00 1 045 128 dbghelp.dll
29/08/2011 16:39 < DIR > DriverCache
01/06/2011 12:09 40 048 hcmon.sys
01/06/2011-14:00 1 116 672 iconv.dll
23/09/2011 19:21 libxml2.dll 970 352
01/06/2011 12:01 7 573 vmusb.cat
01/06/2011 12:01 5 937 vmusb.inf
01/06/2011 12:01 37 680 vmusb.sys
01/06/2011 12:09 609 904 vmware — usbarbitrator.exe
23/09/2011 19:21 3 824 240 vmwarebase.dll
23/09/2011 19:21 760 432 vnetlib.dll
23/09/2011 19:21 707 184 vnetlib.exe
23/09/2011 19:21 968 816 vnetlib64.dll
23/09/2011 19:21 932 464 vnetlib64.exe
01/06/2011-14:00 62 464 zlib1.dll
14 file (s) on 11,088,894 bytes
3 dir 70,204,178,432 bytes free

C:\Program Files (x 86) \Common Files\VMware\USB > vmware — usbarbitrator.exe

C:\Program Files (x 86) \Common Files\VMware\USB >

No process is added to the task list during the execution of this file. Process has been seen with ProcMon (attached logfile (Logfile.PML)).

Discovered a log file generated by vmware — usbarbitrator.exe in C:\Users\Mike Durakovich\AppData\Local\Temp\vmware-Mike Durakovich, attached (vmware-usbarb-Mike Durakovich — 9360.log).  He recorded attempts to load a user of «C:\ProgramData\VMware\VMware USB arbitration Service\config.ini» config.ini file, but the file does not exist, although the directory only.

You can provide all the help is appreciated. There is NO non-standard USB driver on the system, Sony Ericcson or otherwise, only the original MSFT drivers. In addition, HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class {36FC9E60-C465-11CF-8056-444553540000} \UpperFilter exist, has been removed, and I restarted, no effect.

OK — then this is the missing file.
Please review
http://sanbarrow.com/network/cmdguide2workstation.html
and try to manually install the hcmon

Call for help if necessary

VMWare Virtual Center Server does not start after Windows Update

Help!  I’m under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file…

and error 1000 in the Windows application log:

Could not initialize the VMware VirtualCenter. Closing…

PS — I confirmed that the SQL instance is running.

Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a «space» condition, but there are a lot of available space.

I have attached the file vpxd.log, he created.

Clues?

Thank you.

OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

Windows Defender service does not start on Windows 7

On my laptop, Windows Defender is no longer in effect. Reads the message: the service does not start. When I manually try to start the Defender, the massage is: file not found!
I can’t remove Defender another upodate no longer works.

Someone knows a solution?

Hello

Go to configuration-system board and security — administrative tools — services. Find the windows defender and double-click it. Then choose, auto start option, click on apply. turn it back on.

In addition, you can read about trouble of Windows defender:

http://support.Microsoft.com/kb/931849

R12.1.1 Fullfillment service does not start in windows 2003 envirinment

I tried to start the service of realization. It starts and then stops abruptly.

Help, please

Hello

Run only AutoConfig, he must recreate the services (remove/create all application services).

Kind regards
Hussein

the inventory of VMware service does not start, the wrong function, bad sql server port

I’ve migrated vcenter SQL database to a new server after this KB

https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don’t want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can’t even find ssocli, the mentioned folder structure does not exist on my installation

Thank you.

I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

vCenter Server Service does not start after P2V

Hello community.

A problem that I have not been able to solve and looking for help.

Problem:

vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

History:

The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let’s break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re — use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I’m having.  ERROR 2 code has many articles and none have worked.

Details:

vCenter 5.1 Build 799731

SQL 2008 R2

Windows 2008 R2

When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

When I saw the Windows system event log I get this error:

EVENT ID: 7024

The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file…

When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

2013-12 — T 03, 16: 08:21.843 — 05:00 [info 09168 ‘dbdbPortgroup’] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

2013-12 — T 03, 16: 08:21.844 — 05:00 [info 09168 «authvpxdMoSessionManager»] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

2013-12 — T 03, 16: 08:21.844 — 05:00 [09168 «authvpxdMoSessionManager» info] certificates [OSP] [SessionManagerMo::Init] download m root…

2013-12 — T 03, 16: 08:21.858 — 05:00 [01440 info «Default»] wire attached

2013-12 — T 03, 16: 08:21.880 — 05:00 [09168 error ‘vpxdvpxdMain’] [Vpxd::ServerApp:Init] Init failed: unexpected exception

-> Backtrace:

-> backtrace [00] rip 000000018018977 a

-> backtrace [01] rip 0000000180100 c 98

-> backtrace [02] rip 0000000180101fae

-> backtrace [03] rip 000000018008aeab

-> backtrace [04] rip 00000000005 b 4971

-> backtrace [05] rip 0000000000551298

-> backtrace [06] rip 00000000005516 c 9

-> backtrace [07] rip 00000000004c0fae

-> backtrace [08] rip 00000001405bbfb8

-> backtrace [09] rip 000000013f4b0078

-> backtrace [10] rip 000000013f4b016a

-> backtrace [11] rip 000000013f4b0279

-> backtrace [12] rip 000000013f4b0609

-> backtrace [13] rip 000000013f7f2903

-> backtrace [14] rip 000000013ff9e4b9

-> backtrace [15] rip 000000013ff9835c

-> backtrace [16] rip 00000001401b8a3b

-> backtrace [17] rip 000007fefedca82d

-> backtrace [18] rip 000000007783652d

-> backtrace [19] rip 0000000077ccc521

->

2013-12 — T 03, 16: 08:21.881 — 05:00 [warning 09168 ‘VpxProfiler»] ServerApp::Init [TotalTime] took ms 4603

2013-12 — T 03, 16: 08:21.881 — 05:00 [09168 error «Default»] could not initialize VMware VirtualCenter. Closing…

2013-12 — T 03, 16: 08:21.882 — 05:00 [09168 «vpxdvpxdSupportManager» info] free/busy information wrote

2013-12 — T 03, 16: 08:29.280 — 05:00 [00788 WARNING opID «VpxProfiler» SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

2013-12 — T 03, 16: 08:41.280 — 05:00 [00788 WARNING opID «VpxProfiler» SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 — T 03, 16: 08:53.281 — 05:00 [00788 WARNING opID «VpxProfiler» SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 — T 03, 16: 09:05.282 — 05:00 [00788 WARNING opID «VpxProfiler» SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

2013-12 — T 03, 16: 09:17.283 — 05:00 [00788 WARNING opID «VpxProfiler» SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

2013-12 — T 03, 16: 09:17.353 — 05:00 [info 09168 «Default»] forcing of VMware VirtualCenter stop now

I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can’t find one of its guests in the vdxp log, but that shouldn’t matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server… aka the server can see.  I didn’t remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)… And the only thing that won’t start is always VCENTER SERVER… SSO is started, SQL is launched…

Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don’t show any problems.  Only when its summer P2V would have done that themselves.

I can’t get this number.  Need help.

Thoughts?

Thank you

BostonTechGuy

In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it’s what has been done.

Thank you

BostonTechGuy

vCenter VC service does not start

vSphere 4.1 running on WIN2K8 R2 ENT 64 bit.

The center of the vCenter Server virtual server service does not start.

I migrated just box 32-bit physical in a 64-bit vm and the following documentation for VMware, I migrated to the database successfully last week. Everything seemed to work ok after. However, when I arrived this morning, I noticed that I can not connect, so I opened vSphere client on the host computer and consoled in. I noticed that the service wasn’t working, so I tried to start it and I received the following message:

Event ID 7024 with the following in the system log:

«The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the file specified.»

I restarted the VM server, but neither VC service or Web services Mgmt Services were running. I started VC temporarily, but he stopped.

I checked the system event log and found this error event:

«The service of Server VMware VirtualCenter ended unexpectedly. It has done this 1 time.  The following corrective action will be taken in 300000 milliseconds: restart the service. »

After digging in the application log, I seem to have the found guilty (EVENT ID 9002):

«For the ‘VIM_VCDB’ database transaction log is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases»

I know this has something to do with SQL, but there is no SQL Studio Mgt installed on this box.

How can I there to remedy?

Thank you

Alex

Hello.

Check out http://www.vladan.fr/how-to-fix-%E2%80%9Ctransaction-log-for-database-%E2%80%98vim_vcdb%E2%80%99-is-full%E2%80%9D-errors/

Good luck!

Error: 80070426-Windows Update may not install as Cryptographic Services does not start.

Hello!

As you can guess Windows Update is not installed for a few months. Cryptographic services does not start . CPP is the beginning.

Error: 80070426

Already tried a few suggestions MSKB.

Method 2: Set Cryptographic Services to automatic, network logon. Result: Error (unsigned) 1083
Method 3: Rename the Catroot2 folder
Reregister DLL files that are associated with Cryptographic Services.
However, suite couldn ‘ t be installed.

regsvr32 initpki.dll
regsvr32 gpkcsp.dll

regsvr32 sccbase.dll
regsvr32 slbcsp.dll

DCOM service — access denied when running.

sfc/scannow couldn’t fix some corrupted files.

Computer HP laptop came with Vista pre-installed, so I do not have the repair disk.

No doubt the system restore won’t help, as I remember recently that c-Cleaner wiped the old restore points.

NOD32 Antivirus + Spyware Doctor still running. Already run MSRT and Super Spyware, but nothing much.

Kindly help!

Kind regards

Satyajit

Diagnostic report (1.9.0011.0):
——————————————
Given WGA—>
Validation status: genuine
Validation code: 0

Code of Validation caching: 0x0
Windows product key: *-* — GD2PK — BD3R2-44MV3
The Windows Product Key hash: f7FPE6g/CLFmnJ4E6GbEU9Xn1sA =
Windows product ID: 89572-OEM-7332166-00021
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.0.6000.2.00010300.0.0.002
ID: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D} (3)
Admin: Yes
TestCab: 0x0
WGA version: registered, 1.9.9.1
Signed by: Microsoft
Product name: Windows Vista (TM) Home Basic
Architecture: 0x00000000
Build lab: 6000.vista_gdr.080917 — 1612
TTS Error: M:20091104073513946-
Validation of diagnosis:
Resolution state: n/a

WgaER data—>
ThreatID (s): n/a, hr = 0 x 80070002
Version: 6.0.6002.16398

WGA Notifications data—>
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002

OGA Notifications data—>
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002

OGA data—>
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 — 103 blocked VLK
Microsoft Office Home and Student 2007-100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

Data browser—>
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed

Analysis of file data—>
[File mismatch: C:\Windows\system32\Slsvc.exe[6.0.6000.16509]
[File mismatch: C:\Windows\system32\drivers\Spsys.sys[6.0.5840.16389]
[File mismatch: C:\Windows\system32\Slcext.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\kernel32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpcrt4.dll[6.0.6000.16525]
[File mismatch: C:\Windows\system32\authz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msvcrt.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\samlib.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ntdsapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dnsapi.dll[6.0.6000.16615]
[File mismatch: C:\Windows\system32\ws2_32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\user32.dll[6.0.6000.16438]
[File mismatch: C:\Windows\system32\gdi32.dll[6.0.6000.16766]
[File mismatch: C:\Windows\system32\msimg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\powrprof.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\setupapi.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\oleaut32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\ole32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shell32.dll[6.0.6000.16774]
[File mismatch: C:\Windows\system32\shlwapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\version.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winmm.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oleacc.dll[4.2.5406.0]
[File mismatch: C:\Windows\system32\mmdevapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wtsapi32.dll[6.0.6000.16553]
[File mismatch: C:\Windows\system32\regapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\crypt32.dll[6.0.6000.16425]
[File mismatch: C:\Windows\system32\msasn1.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\userenv.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\secur32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netapi32.dll[6.0.6000.16764]
[File mismatch: C:\Windows\system32\psapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netrap.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wldap32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winbrand.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iphlpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\winnsi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\dhcpcsvc6.dll[6.0.6000.16512]
[File mismatch: C:\Windows\system32\gpapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\slc.dll[6.0.6000.16509]
[File mismatch: C:\Windows\system32\gpsvc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\sysntfy.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winsta.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\nlaapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ncrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\bcrypt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mpr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\credui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cryptui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wintrust.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imagehlp.dll[6.0.6000.16470]
[File mismatch: C:\Windows\system32\dbghelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mssign32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\wininet.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\normaliz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\iertutil.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\tapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rtutils.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasapi32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasman.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rasdlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mprapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\activeds.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\adsldpc.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\atl.dll[3.5.2284.0]
[File mismatch: C:\Windows\system32\certcli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winscard.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\netplwiz.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\urlmon.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\propsys.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\xmllite.dll[1.1.1002.0]
[File mismatch: C:\Windows\system32\mlang.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\advpack.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\apphelp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msiltcfg.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\shunimpl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\devmgr.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\newdev.dll[6.0.5054.0]
[File mismatch: C:\Windows\system32\dwmapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winspool.drv[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cscapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\uxtheme.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\windowscodecs.dll[6.0.6000.16740]
[File mismatch: C:\Windows\system32\ntshrui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\feclient.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\shdocvw.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\browseui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imm32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\msctf.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\duser.dll[6.0.6000.16386]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16386_none_9ea0ac9ec96e7127\gdiplus.dll[5.2.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6000.16550_none_56f0fd51b4f462f8\gdiplus.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\msrating.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\ieframe.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msi.dll[4.0.6000.16386]
[File mismatch: C:\Windows\system32\mshtml.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\msls31.dll[3.10.349.0]
[File mismatch: C:\Windows\winsxs\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_87e0cb09378714f1\comctl32.dll[5.82.6000.16386]
[File mismatch: C:\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.6000.16386_none_40339432230aebeb\comctl32.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\comdlg32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\printui.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\cfgmgr32.dll[6.0.6000.16609]
[File mismatch: C:\Windows\system32\puiapi.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\hlink.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\imgutil.dll[7.0.6000.16386]
[File mismatch: C:\Windows\system32\usp10.dll[1.626.6000.16386]
[File mismatch: C:\Windows\system32\inetcomm.dll[6.0.6000.16669]
[File mismatch: C:\Windows\system32\msoert2.dll[6.0.6000.16480]
[File mismatch: C:\Windows\system32\ieui.dll[7.0.6000.16809]
[File mismatch: C:\Windows\system32\efsadu.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\mfc42u.dll[6.6.8063.0]
[File mismatch: C:\Windows\system32\odbc32.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\oledlg.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\linkinfo.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\query.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\clbcatq.dll[2001.12.6930.16386]
[File mismatch: C:\Windows\system32\cabinet.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\scecli.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\w32topl.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\rpchttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\winhttp.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\fwpuclnt.dll[6.0.6000.16386]
[File mismatch: C:\Windows\system32\ktmw32.dll[6.0.6000.16386]

Other data—>
Office details: {5FC29B42-80DC-4BE3-B5EA-37281853FA7D}1.9.0011.06.0.6000.2.00010300.0.0.002x 32*-*-*-*-44MV389572-OEM-7332166-000212S-1-5-21-3747016915-1105364745-1034703816Hewlett-Packardlaptop Presario V6500 Hewlett-PackardF.2A 20080222000000.000000 + 000A4313507018400EE40090409India Standard Time(GMT+05:30)03HPQOEMSLIC-MPC10310312C0A25836FDBE5ACFmDbcrRY1pTOcrz4ZUZRHhpUuc0 = Microsoft Office Enterprise 2007 89388 726-2958074-6564314100Microsoft Office home and Student 20071219

Spsys.log Content: U1BMRwEAAAAAAQAABAAAAC58AgAAAAAAYWECADAgAADCBCA/81zKARhDs/4hWdo7Xkl9D+HKpni6Sfv7jmoHEBVqqW/xcrQYytms9RtRtLWsIPXcLJpmwOfDvX0zCybmDilyQLttVIyTRhimAiUiBLOYhz3eEQj3sEGnmR0ReJ9KlWCJouxq6PAIwHwHVMfvNauSbFvmaTCDPKtQZQFIQcDXIAwFGl6D9S/GUDYecePFRKM/leS97bxOVVm9fICZUkfHdDNbo72qUqYYmAlRJO05+WV1r70w2O6Pl99gqTnSYR4j0FashTOQ1ifb1stzrqx+w3WNaAwzkNYn29bLc66sfsN1jWgMM5DWJ9vWy3OurH7DdY1oDDOQ1ifb1stzrqx+w3WNaAw=

License data—>
The software licensing service version: 6.0.6000.16509
Name: Windows Vista HomeBasic edition
Description: operating system Windows — Vista, channel OEM_SLP
Activation ID: 199086aa-6cb8-4e5b-b698-f2be56f1e8ee
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 89572-00146-321-600021-02-16393-6000.0000-0492008
Installation ID: 234075993312598255872244522405847072649516093605215141
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkId=57201
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkId=57203
Use license URL: http://go.microsoft.com/fwlink/?LinkId=57205
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkId=57204
Partial product key: 44MV3
License status: licensed

—> HWID data
Current Hash HWID: QAAAAAEABwABAAIAAgABAAAAAwABAAEAnJ9ERYTHdhu84yC + gASIzAaYmGC6ZEQsznDy9J4v6lrYfiqsrFZ4qg is

Activation 1.0 data OEM—>
N/A

Activation 2.0 data OEM—>
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20000
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP NVIDIA MCP67-M
SRAT AMD HAMMER
HPET PTLTD HPETTBL
START PTLTD $SBFTBL$
MCFG MCFG PTLTD
TCPA Phoenix x
SSDT PTLTD POWERNOW
SLIC SLIC-MPC HPQOEM

Thank God!

Finally, I worked it out myself. But it’s painful to watch than virtually any other that Uday has responded to my problem. Something I’ve been waiting for so eagerly.

I applied my common sense and defragmented the dirives then sfc/scannow, and it worked. Cryptographic Services said when I began to log in as network account. So my problem is solved. Now, windows update works fine.

Interestingly, Microsoft Fix it, says it cannot start the Cryptographic Services. Are God, while the _____ you supposed to difficulty? It made Internet Explorer icon on my desktop and other places.

Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

I hope this helps…

Bluetooth support service does not start on VISTA

When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it’s the BT support service does not start. Any help is appreciated.

Hello

Hardware devices not detected or does not work — a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

The problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

Set up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

The problems with Bluetooth devices
http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

How to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
When you click on the element — for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-us

If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses — oui.txt is provided) — FREE
http://www.NirSoft.NET/utils/bluetoothcl.html

———————————————————————

More information of possible interest to some:

What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

Connect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

I hope this helps.

Rob Brown — MS MVP — Windows Desktop Experience: Bike — Mark Twain said it right.

WebSigner Service does not start, Windows 7

Hey Experts,.

I’m trying to follow the guide on the protection of the PerstentObjects using ControlledAccess.

I HAV created and imported one. Record MAIN in my project and chosen the class to be protected.

Now, my problem arises when I try to sign the Bill. Sign Tool told me that my custom key is not registered.

How can I register it? Do I need a. File CSI to do this and if so, how to generate it? Thank you.

UPDATE: I just realized than that one possible reason is that the WebSigner service does not start. When I look in servcies.msc it just gets stuck at the start.

Any ideas on how to start? Thank you.

You can manually create and install your keys using the administration tool. The webservice is only if you can connect using the signature tool. WebService not auto start on windows 7 because it does not interactive services. There is a setting that you can change for this purpose and there a small dialog box will appear asking to connect to start the service whenever you start. Just google for interactive services on windows 7.

Windows Firewall service does not start after the removal of Virus

Hello

I believe that my son’s computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start — it throws an exception to access denied on startup and when I try to start the service manually.

I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I’ve even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message «imported».

I also tried the troubleshooting of Windows Firewall that confusedly says:

«Windows could not start the Windows Firewall… Not fixed

«Set permissions for the registry keys involved»… succeeded

«Windows Firewall service is not started. Not fixed

«Starting the Firewall Service»… succeeded

Any ideas would be most appreciated.

Thank you.

It seems that I solved the problem by running this:

that I found in a post on this thread:

Service does not start with no Local System connection

I implemented a service (CrashPlanService) to connect like myself, not as a Local System. However, the service does not start automatically, or as automatic (delayed start) and noted «the account name is invalid or does not exist, or the password is invalid for the specified account name» in the event log even if the account name and password are correctly defined. I have to start it manually after every restart (and thus know the account/password combo is correct).
Windows 7 Enterprise.
Advice?

Hello

Thanks for posting the question on the Microsoft Community Forums.

According to the description, it looks like CrashPlan Service does not start automatically after you start the computer.

The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

TMSPE Service does not start

Hi experts

For some reason any my tmspe service does not start. When I try to run it it ends with 1603 service could not be started… Any ideas?

Charles H

Thank you, Dale, Yes, it took until after I posted that I remembered that show Diagnostics.

Charles — something else you should check, is the TMSPE logs.  They could contain a little more in detail to see what the problem is.