Failed to load VMMR0.r0 (VERR_LDR_MISMATCH_NATIVE)
My VMs on Virtualbox 4.2 (on Windows 7 32-bit) were running absolutely fine until I started installing a new VM, which would not go beyond the Linux boot screen.
I deleted the VM and created new one, but it still didn’t run.
So I installed the new version of VirtualBox (version 4.3.6.r91406) and rebooted the machine; but when I started any of my previously working VMs, I got the following error
Failed to open a session for the virtual machine m14
Failed to load VMMR0.r0
(VERR_LDR_MISMATCH_NATIVE
with the following details:
Result Code: E_FAIL (0x80004005)
Component: Console
Interface: IConsole
{8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
On checking the forums, I saw few posts asking to check the .vbox
files. In the directory of the VM, there are two, m14.vbox
and m14.vbox-prev
.
I removed the prev file and restarted the VM, again got same error, and the m14.vbox-prev
file came again. So I then removed the original m14.vbox
file and renamed the prev file to original and then started the VM: it still didn’t work.
Any clues fixing this?
-
JJC60631
- Posts: 2
- Joined: 16. Jan 2020, 03:37
[Solved] HELP?? «(VERR_SUPLIB_PATH_NOT_CLEAN)»
Trying to build initial VirtualBox install. Added Debian, Ubuntu, Win7, & Win10 VMs. Unable to start any of them due to this error…
Failed to load R0 module D:\/VMMR0.r0: The path is not clean of leading double slashes: ‘D:\/VMMR0.r0’ (VERR_SUPLIB_PATH_NOT_CLEAN).
Failed to load VMMR0.r0 (VERR_SUPLIB_PATH_NOT_CLEAN).
Result Code:
E_FAIL (0x80004005)
Component:
ConsoleWrap
Interface:
IConsole {872da645-4a9b-1727-bee2-5585105b9eed}
For the life of me I cannot find any info to lead me in any direction. Thanks in advance for any help provided!!
- Attachments
-
- WinDev1912Eval-2020-01-15-18-18-45.log
- Failure log
- (3.54 KiB) Downloaded 1436 times
-
mpack
- Site Moderator
- Posts: 38792
- Joined: 4. Sep 2008, 17:09
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Mostly XP
Re: HELP?? «(VERR_SUPLIB_PATH_NOT_CLEAN)»
Post
by mpack »
Was this a standard VirtualBox install, using the official installer? And you didn’t change the install folder?
00:00:02.360975 PDMLdr: pdmR3LoadR0U: pszName=»VMMR0.r0″ rc=VERR_SUPLIB_PATH_NOT_CLEAN szErr=»The path is not clean of leading double slashes: ‘D:\/VMMR0.r0’»
Look for a syntax error in the global search path on your host.
-
scottgus1
- Site Moderator
- Posts: 19753
- Joined: 30. Dec 2009, 20:14
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Windows, Linux
Re: HELP?? «(VERR_SUPLIB_PATH_NOT_CLEAN)»
Post
by scottgus1 »
From the log:
00:00:02.269960 Executable: D:\VirtualBoxVM.exe
VirtualboxVM.exe is supposed to be in the install folder for Virtualbox. This means you installed Vierualbox in the root of your D: drive, with all of the program’s files laying willy-nilly out in the open. There’s going to be something wrong with this somewhere, likely in a Virtualbox script that expects the parent folder for Virtualbox to not be a drive root. You should have at least put it in a folder.
Uninstall Virtualbox. Your guests will remain where they are. Reinstall Virtualbox in the default folder «C:\Program Files\Oracle\Virtualbox» or at least on the C: drive, in a desired folder of your making. Your guests can stay on the D drive. Reinstall by right-clicking the installer and choosing Run As Administrator.
-
mpack
- Site Moderator
- Posts: 38792
- Joined: 4. Sep 2008, 17:09
- Primary OS: MS Windows 10
- VBox Version: PUEL
- Guest OSses: Mostly XP
Re: HELP?? «(VERR_SUPLIB_PATH_NOT_CLEAN)»
Post
by mpack »
JJC60631 wrote:I installed it on a different drive due to space
And incidentally, that was faulty thinking. If your C: drive couldn’t afford the <300MB needed to install the software then your PC is in serious trouble. That, and the drive where the software is installed has absolutely no influence on where the really big data files go, i.e. the VMs. That would still have defaulted to drive C.
Failed to load VMMR0.r0 (VERR_LDR_MISMATCH_NATIVE)
Мои виртуальные машины на Virtualbox 4.2 (в 32-разрядной версии Windows 7) работали абсолютно нормально, пока я не начал устанавливать новую виртуальную машину, которая не выходит за рамки загрузки Linux.
Я удалил виртуальную машину и создал новую, но она все еще не запускалась.
Итак, я установил новую версию VirtualBox (версия 4.3.6.r91406) и перезагрузил машину; но когда я запустил какую-либо из моих ранее работающих виртуальных машин, я получил следующую ошибку:
Failed to open a session for the virtual machine m14
Failed to load VMMR0.r0
(VERR_LDR_MISMATCH_NATIVE
со следующими деталями:
Result Code: E_FAIL (0x80004005)
Component: Console
Interface: IConsole
{8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
При проверке форумов я видел несколько сообщений с просьбой проверить файлы .vbox
. В каталоге VM есть два, m14.vbox
и m14.vbox-prev
.
Я удалил предыдущий файл и перезапустил виртуальную машину, снова получил ту же ошибку, и снова появился файл m14.vbox-prev
. Поэтому я удалил исходный файл m14.vbox
и переименовал исходный файл в оригинал, а затем запустил виртуальную машину: он все еще не работал.
Любые подсказки, фиксирующие это?
Ответ 1
Добавить или обновить добавочный пакет.
Если это не решает проблему, удалите виртуальный ящик, удалите следующую папку:
C:\USERS\<username>\AppData\Local\VirtualStore\Program Files\Oracle
затем снова установите Virtual Box и запустите его как администратор. (В некоторых случаях его запуск может выполняться как простой пользователь).
Ответ 2
Привет, у меня была такая же проблема в версии 4.3
Я отключил дискету и компакт-диск в системной конфигурации виртуальной машины, а затем машина запустилась правильно, не осознавая ошибку.
Ответ 3
Запуск от имени администратора
У меня была такая же проблема после обновления с 4.1 или 4.2 до 4.3.18.
Я не перезагрузился, и для меня (в Windows) работала техника правой кнопкой мыши по значку Virtualbox — Run as Administrator.
Ответ 4
PLS запустите файл vbox-ssl-cacertificate.crt. Это может решить проблему выше. Это решение работает для меня.
Ответ 5
НАКОНЕЦ.
A назад, я включил ASLR для всего, используя EMET. Запуск EMET снова и изменение его на значение по умолчанию «Application OptIn» + перезагрузка исправлена.
Ответ 6
Как akshah123 У меня был верификатор драйвера (verifier.exe), запущенный, потому что я диагностировал случайные BSOD на моем ноутбуке. Продолжительность:
verifier.exe /reset
а затем перезагрузка исправила эту проблему для меня.
Ответ 7
Запуск VirtualBox в качестве администратора заставил мою виртуальную машину работать как обычно.
Не нужно было пытаться использовать какой-либо другой подход.
Exception Object
(
[message:protected] => Failed to load R0 module /opt/VirtualBox/VMMR0.r0: Symlinks are not permitted: ‘/opt’ (VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED).
Failed to load VMMR0.r0 (VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED)
[string:Exception:private] =>
[code:protected] => 0
[file:protected] => /volume1/web/phpvirtualbox/endpoints/lib/vboxconnector.php
[line:protected] => 2429
[trace:Exception:private] => Array
(
[0] => Array
(
[file] => /volume1/web/phpvirtualbox/endpoints/lib/vboxconnector.php
[line] => 951
[function] => remote_progressGet
[class] => vboxconnector
[type] => ->
[args] => Array
(
[0] => Array
(
[progress] => 6890a5beaa36c396-0000000000000005
)
)
)
[1] => Array
(
[file] => /volume1/web/phpvirtualbox/endpoints/api.php
[line] => 316
[function] => __call
[class] => vboxconnector
[type] => ->
[args] => Array
(
[0] => progressGet
[1] => Array
(
[0] => Array
(
[progress] => 6890a5beaa36c396-0000000000000005
)
[1] => Array
(
[0] => Array
(
[data] => Array
(
[responseData] => Array
(
[progress] => 6890a5beaa36c396-0000000000000005
[info] => Array
(
[completed] => 1
[canceled] =>
[description] => Starting VM
[operationDescription] => Starting virtual machine
[timeRemaining] => Array
(
)
[timeElapsed] => Array
(
[days] => 16810
[hours] => 15
[minutes] => 10
[seconds] => 47
)
[percent] => 20
)
)
[success] => 1
[key] => 53474945cfd7ac0bf8114767c209c2a6
)
[errors] => Array
(
)
[persist] => Array
(
)
[messages] => Array
(
)
)
)
)
)
)
[2] => Array
(
[file] => /volume1/web/phpvirtualbox/endpoints/api.php
[line] => 316
[function] => progressGet
[class] => vboxconnector
[type] => ->
[args] => Array
(
[0] => Array
(
[progress] => 6890a5beaa36c396-0000000000000005
)
[1] => Array
(
[0] => Array
(
[data] => Array
(
[responseData] => Array
(
[progress] => 6890a5beaa36c396-0000000000000005
[info] => Array
(
[completed] => 1
[canceled] =>
[description] => Starting VM
[operationDescription] => Starting virtual machine
[timeRemaining] => Array
(
)
[timeElapsed] => Array
(
[days] => 16810
[hours] => 15
[minutes] => 10
[seconds] => 47
)
[percent] => 20
)
)
[success] => 1
[key] => 53474945cfd7ac0bf8114767c209c2a6
)
[errors] => Array
(
)
[persist] => Array
(
)
[messages] => Array
(
)
)
)
)
)
)
[previous:Exception:private] =>
)