Tried printing out of printing area ошибка

Which «printer» is reporting «… print is out of printing area…» exactly?
What are your print settings in your PDF reader? Show us, post the screenshot of that pop-up.
Why not post this PDF with this problem too, let’s have a look at the final file (thanks for posting the DWG files too).

I have created page setup to print these layouts. I will attach the .dwg files again since I have tried to solve this meanwhile and created new page setup which is «Setup1». Took many screenshots and zipped them in pics.zip. Now also the pdf attached.

AutoCAD 2020

There is something definitely wrong with the PDF: I used PUBLISH command set to DWG to PDF in your file with all of your layouts (some are blank of course) and the resulting PDF (see attached) prints just fine.

I managed to limit the problem to pdf file. Using setup 1 I can print the pdf just fine when there only the first layout is batch plotted. After I add second page to batch plot the pdf, it cant be printed anymore since the previously mentioned error message occurs. This file is converted from .dgn by autocad and there are text blocks which are streched out from the frame im trying to print. I think I’m streching them back to frame and try printing again. For example one in the down right corner of each frame.

AutoCAD 2020

Ok. So the file can be printed with PDF-XChange Viewer.

I am pretty sure that the problem lies here: https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/Error-…

There are just some elements that Adobe Reader cant render correctly. I’m not going to waste any more time for to look the exact item that causes the problem since the printing can be done with another PDF viewer.

I also looked the PDF you printed and it looks that the PDF didnt include the reference .dwg.

If you come up with any other solutions than rendering problem with adobe, please let me know and thanks for help anyway

AutoCAD 2020

>>>…the PDF didnt include the reference .dwg….<<<
I only downloaded the one file for my test. Your ‘default» file kept crashing my system for some reason.

Your top file reports 44-errors and is littered with DGN object types (I think we’ve discussed this before): here is another PDF from PUBLISH, still no issues even with the titleblock (and your many empty layouts). I’m still not seeing any issues at all.

I ran through some general file clean up steps on the file you provided. I then ran a few prints both PDF and to our in office printer.  

Checking in, did any of the posts in the thread help with the issue?

Please use the Accept as Solution for those post’s that helped. It may benefit other users who might have a similar question or issue.

Or post with any new updates if you need continued help on your thread.

Thanks for your time.

I managed to print the file out with external reference attached (the one which pendean told caused the errors). Printing could not be done with Acrobat Reader so I used PDF XChange-Viewer. Somehow Acrobat Reader was not able to this job on my computer. I tried many different printing settings with it (fit page, shrink oversized paged etc.). So, should I accept this post now as a solution?

AutoCAD LT is definetily not best tool for .dgn to .dwg conversion. Or the file I tried to convert was somehow damaged or old .dgn version.

AutoCAD 2020

Just a thought, if you’re using AutoCAD LT 2014 and by chance updated Adobe acrobat to the newest update/release it may have caused some issues. 

I tested your file in AutoCAD LT 2016 and 2017 with no issues (after running a recover and a few file clean up commands). 

But if Deans post helped you resolve your issue or find a suitable workaround please do use the Accept as Solution button or give Kudos as you see fit. 

Pendean recently reported that my file included errors and so did you. You also told that you ran «recover» and «few clean up commands». How is this done?

Do I need AutoCAD version with more functions to even notice these errors you have talked about? My AutoCAD did not report anything.

And are these recovers and clean ups possible to do with AutoCAD LT 2014? If its is, how its done?

AutoCAD 2020

AUDIT will fix any errors for you

PURGE  will delete unused items in the drawing file

Thanks But how can I be aware of any errors since two people already told me that my .dwg had errors and I didnt have the slightest clue about it?

AutoCAD 2020

You can’t automatically be aware that any errors have appeared in your drawing.

However if you have a problem with a drawing. The Audit command will usually tell you if there are any errors in it

The file clean-up command’s I normally run through myself and suggest are the following; 

• Run RECOVERALL, at the command line and select drawing, save drawing and close.
• Run RECOVER, at the command line and select drawing.
• (-)PURGE > Regapps > Enter>No
• (-)PURGE>ALL> Enter>No
• AUDIT> Yes
• PURGE > Select Purge nested items> Select Automatically purge orphaned data > Purge All
• (-)SCALESEDIT
• CTRL+A > OVERKILL (Warning: use this command with caution, running the command modifies your geometry by deleting objects you may need. Save a copy of the original file in case of any unwanted changes. )
• Close and Save newly purged file (ex. CLEANED_file)
• Apply workflow.

You can also reference this AKN article:  How to repair corrupt AutoCAD files

As hwalker mentioned the Audit command will let you know what errors show up. I normally us F2 when running the commands above and Audit so I have a bigger window to read the errors if that helps in anyway.