Swegon gold ошибки

  • Bookmarks

Quick Links

MANUAL FOR ALARMS AND INFORMATION MESSAGES

GOLD RX/PX/CX/SD

Generation F

Applicable to Program Version 1.30 and newer versions

loading

Related Manuals for Swegon GOLD RX

Summary of Contents for Swegon GOLD RX

  • Page 1
    MANUAL FOR ALARMS AND INFORMATION MESSAGES GOLD RX/PX/CX/SD Generation F Applicable to Program Version 1.30 and newer versions…
  • Page 2
    GB.GOLDSKFLARM.190920 Content Innehåll 1. Alarm Descriptions with Factory Settings ….. 3 2. Information Messages ………. 35 The document was originally written in Swedish. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 3: Alarm Descriptions With Factory Settings

    3 second alarm delay. PRE-HEAT, VALVE MONITORING TRIPPED 10 m Valve actuator, air heater, water. The valve actuator’s response signal deviates from the outgoing control signal. 10 minute alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 4
    EXTRA REGULATION SEQUENCE 1, TEMPERATURE PRO- TECTION FROM COMMUNICATION ERROR The air handling unit’s control unit does receive the temperature via the external communications interface within the set time limit. 5 minute alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 5: Electrical Heater

    SOR DEFECTIVE Supply flow temperature sensor to the combi coil is defective or not connected. Check terminal connections 9-10 and the sensor’s polar- ity on I/O-module F. 3 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 6
    Xzone, SUPPLY AIR TEMPERATURE SENSOR DEFECTIVE Supply air sensor is defective or is not connected. Check terminal connections 9-10 and the sensor’s polar- ity on I/O-module A. 3 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 7: Alarm Limit

    20 second alarm delay. Xzone, COOL, ALARM INPUT 2 TRIPPED 20 s Alarm input 2 Xzone cool has tripped. Check terminal connections 19-20 on I/O-module B. 20 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 8
    “Sensor 3” (the sensor placed on the left-hand side) or “Sensor 4” (the sensor placed on the right-hand side). For GOLD RX the sensor can also be used as a tem- perature alarm and be placed after the supply air fan. 3 second alarm delay.
  • Page 9
    B = B alarm h=hour 10:4 EXTRACT AIR TEMPERATURE SENSOR FOR DENSITY COMPENSATION DEFECTIVE (GOLD RX/PX/CX) The temperature sensor in the extract air fan intake cannot establish correct communications or shows an incorrect value. Check that the sensor is connected to the connection on the IQlogic controller.
  • Page 10
    For several connected sensors: check that the function selector switches are not set in the same position and check that the cables are connected correctly between the sensor and connection unit. 10 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 11
    For several connected sensors: check that the function selector switches are not set in the same position and check that the cables are connected correctly between the sensor and connection unit. 10 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 12
    20 minutes. Alarm limit 5 K (adjustable). Check the correct function on heat exchangers and any reheaters. Also check that the aforementioned are dimensioned for the current setpoint. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 13
    The heat exchanger’s efficiency is below the preset alarm limit for more than 2 minutes. Check the operation of the heat exchanger. GOLD RX: check that the heat exchanger belts do not slip. GOLD PX: check damper operations so that all dampers and actuators work correctly.
  • Page 14
    The VOC sensor has read a level below or above the set point alarm limit for more than 60 seconds. Factory setting 450 ppm and 10,000 ppm (adjustable). Alarm group 14: Spare www.swegon.com We reserve the right to alter specifications without notice.
  • Page 15
    Check that the function selector switch on the I/O mod- ule is set to position 3 and that the cable is connected to COM 6-11 on the IQlogic controller. 10 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 16
    Check terminal connections 2(Y) and 4(U) on I/O-mod- ule 3. Check that the damper does not seize or that the actua- tor slips on the damper shaft. 10 minute alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 17
    Check that the sensor is connected with the right polar- ity. For pump run at constant speed: Check terminal connections 7-8 on I/O-module 1. Check that the sensor is connected with the right polar- ity. 3 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 18
    The air handling unit’s control unit cannot establish cor- rect communications with the rotary heat exchanger’s motor controller. Check that the cable is connected to COM 6-11 on the IQlogic controller. 10 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 19
    Check the incoming voltage to the air handling unit and the outgoing voltage from the transformer. The voltage must not exceed 36 V +15 %. 3 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 20: Over Temperature

    ALARM LIMIT 5) Heated water temperature exceeds preset set point longer than 30 minutes. Alarm limit 7 K (adjustable). Check the correct function on heating circuit and that the valve functions correctly. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 21
    COOL DX, COMPRESSOR NO. 1 LOW PRESSURE SEN- SOR DEFECTIVE Low pressure sensor is defective or is not connected. Check terminal connections 8 (Black), 15 (Green) and 16 (White) on I/O-module 2. 5 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 22
    COOL DX, COMPRESSOR NO. 2 HIGH PRESSURE SEN- SOR DEFECTIVE High pressure sensor is defective or is not connected. Check terminal connections 2 (Black), 9 (Green) and 10 (White) on I/O-module 2. 5 second alarm delay. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 23
    The air handling unit’s control unit cannot establish cor- rect communication with I/O module no. 5, AQUA Link 23:11 AQUA Link, PUMP MONITORING TRIPPED 10 s Pump to AQUA Link is defective. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 24: Communication Error

    27:2 AHU FILTER, SUPPLY AIR FOULED 10 m The pressure across the AHU supply air filter has ex- ceeded the preset alarm limit for more than 10 minutes. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 25
    AIRFLOW MEASUREMENT, PURGING PRESSURE SENSOR 10 s NO. B COMMUNICATION ERROR The air handling unit’s control unit cannot establish cor- rect communication with the sensor of the rotary heat exchanger purging sector. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 26
    , OUTDOOR AIR DAMPER MONITORING TRIPPED 10 m The damper actuator does not move to the right posi- tion. The position-confirming output signal from the damper is not the same as the input control signal. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 27
    A new service period can be set and reset under ALARM SETTINGS. 33:15 LOCK FUNCTION TRIPPED – – – Contact Swegon or their representative. Alarm group 34: External controls 34:1 EXTERNAL CONTROL, I/O MODULE NO. 3 COMMUNI- 10 s CATION ERROR The air handling unit’s control unit cannot establish cor- rect communication with I/O module No.
  • Page 28
    682, 697 563, 578, MIRU NO. 1-3 FLOW BELOW SET POINT ALARM LIMIT 1200 s 40:8 The flow has dropped below its set point for a period longer than 30 seconds. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 29
    EXTRACT AIR FAN 1-3/A-B COMMUNICATION ERROR 10 s 60:1 841, 856, The air handling unit’s control unit cannot establish 871, 886 correct communication with the extract air fan motor controller. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 30
    EXTRACT AIR FAN NO. 1A I/O MODULE COMMUNICA- 10 s TION ERROR The air handling unit’s control unit cannot establish correct communication with extract air fan no. 1A I/O module. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 31
    Phase sequence protection for feed voltage to HC has tripped. 71:1 1051 HC COMPRESSOR MOTOR CONTROL COMMUNICA- 10 s TION ERROR The air handling unit’s control unit cannot establish correct communication with the HC compressor motor control. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 32
    HC pressure equalisation high pressure circuit 1, has tripped. 72:14 1079 HC LOW PRESSURE CIRCUIT 1 BELOW ALARM LIMIT 10 s HC low pressure circuit 1 falls below the set alarm limit. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 33
    1206, SMART LINK NO. 1-4 EVAPORATION TEMPERATURE 30 s 84:6 1221, BELOW ALARM LIMIT 1236, The evaporation temperature drops below the preset 1251 alarm limit for more than 30 seconds. www.swegon.com We reserve the right to alter specifications without notice.
  • Page 34
    Stops the AHU if the temperature is below the adjustable limit. Inactive as factory setting. Contact Swegon or their representative. Alarm group 38 = MIRU Control 1. Alarm group 39 = MIRU Control 2. Alarm group 40 = MIRU Control 3. Alarm group 41 = MIRU Control 4.

  • Page 35: Information Messages

    ROTARY HEAT EXCHANGER DEFROSTING CALIBRATION NOT PERFORMED Defrost calibration, rotary heat exchanger, not performed after function was activated for first time. Recurrent at 30 minute intervals. The message is not received after completed heat exchanger calibration. www.swegon.com We reserve the right to alter specifications without notice.

  • Page 36: Calibration Failure

    Temperature sensor for heat-retaining function is not fitted or is not connected correctly. 99:14 INTERNAL SERIAL MEMORY ERROR CPEx1 Internal serial memory error CPEx1 99:15 CLOCK CIRCUIT DEFECTIVE Circuit for the clock is defective www.swegon.com We reserve the right to alter specifications without notice.

Источник

Information messages are displayed in the hand-held terminal.

Information messages are displayed only when the terminal is in

the Dashboard image.

Message No.

97:12

97:13

97:14

97:15

98:1

98:2

98:3

98:4

98:5

98:6

98:7

98:8

98:9

98:10

98:11

98:12

98:13

98:14

104

www.swegon.com

Message text

PLATE HEAT EXCHANGER, BYPASS OPTIMIZATION NOT PERFORMED

Bypass optimization of plate heat exchanger cannot be performed.

PLATE HEAT EXCHANGER, BYPASS OPTIMIZATION FAILURE

Bypass optimization of the plate heat exchanger has been performed, but the readings are not

satisfactory.

PLATE HEAT EXCHANGER DEFROSTING CALIBRATION NOT PERFORMED

Defrosting calibration of the plate heat exchanger cannot be performed.

PLATE HEAT EXCHANGER DEFROSTING CALIBRATION FAILURE

Defrosting calibration of the plate heat exchanger has been performed, but the readings are not

satisfactory.

SUPPLY AIR PRE-FILTER CALIBRATION NOT PERFORMED

Pre-filter calibration, supply air, not performed after first start. Recurrent at 30 minute intervals. The message is

not received after completed filter calibration.

SUPPLY AIR PRE-FILTER CALIBRATION FAILURE

Pre-filter calibration failure, supply air. Recurrent at 5 second intervals.

EXTRACT AIR PRE-FILTER CALIBRATION NOT PERFORMED

Pre-filter calibration, extract air, not performed after first start. Recurrent at 30 minute intervals. The message

is not received after completed filter calibration.

EXTRACT AIR PRE-FILTER CALIBRATION FAILURE

Pre-filter calibration failure, extract air. Recurrent at 5 second intervals.

SUPPLY AIR AHU FILTER CALIBRATION NOT PERFORMED

supply air AHU filter calibration, supply air, not performed after first start. Recurrent at 30 minute intervals.

The message is not received after completed filter calibration.

SUPPLY AIR AHU FILTER CALIBRATION FAILURE

AHU filter calibration failure, supply air. Recurrent at 5 second intervals.

EXTRACT AIR AHU FILTER CALIBRATION NOT PERFORMED

AHU filter calibration, extract air, not performed after first start. Recurrent at 30 minute intervals. The message

is not received after completed filter calibration.

EXTRACT AIR AHU FILTER CALIBRATION FAILURE

AHU filter calibration failure, extract air. Recurrent at 5 second intervals.

SUPPLY AIR END FILTER CALIBRATION NOT PERFORMED

End filter calibration, supply air, not performed after first start. Recurrent at 30 minute intervals. The message

is not received after completed filter calibration.

SUPPLY AIR END FILTER CALIBRATION FAILURE

End filter calibration failure, supply air. Recurrent at 5 second intervals.

ROTARY HEAT EXCHANGER DEFROSTING CALIBRATION NOT PERFORMED

Defrost calibration, rotary heat exchanger, not performed after function was activated for first time. Recurrent

at 30 minute intervals. The message is not received after completed heat exchanger calibration.

ROTARY HEAT EXCHANGER DEFROSTING CALIBRATION FAILURE

Defrost calibration failure, rotary heat exchanger. Recurrent at 5 second intervals.

ReCO

CALIBRATION NOT PERFORMED

2

ReCO

calibration not performed after function was activated for first time. Recurrent at 30 minute intervals.

2

Message is not received after completed ReCO

ReCO

CALIBRATION FAILURE

2

ReCO

calibration failure. Recurrent at 5 second intervals.

2

Information messages provide information e.g. about necessary

settings that have not been entered or unfavourable operating

conditions.The information message is indicated by a blue circle

in the alarm log button on the instrument panel.

calibration.

2

We reserve the right to alter specifications without notice.

GB.GOLDSKE.160901

Источник

(Ocr-Read Summary of Contents of some pages of the Swegon GOLD LP Document (Main Content), UPD: 05 August 2023)

  • 56, GB.GOLDLP.170830 56 www.swegon.com We reserve the right to alter specifications without notice. 20.2.2 Connection to Terminal Blocks Terminal Function Remarks 1,2 Output 1 Select function individually. Independent contact, max. 5 A/AC1, 1A/AC3, 250 V AC. 3,4 Output 2 Select function individually. Independent contact, max. 5 A/AC1, 1A/AC3, 250 V AC. 5,6 Input 1 Select function individually. 7,8 Input 2 S…

  • 9, GB.GOLDLP.170830 www.swegon.com 9 We reserve the right to alter specifications without notice. Position indicator 5 HAND-HELD MICRO TERMINAL AND HOW TO USE THE MENUS 5.1 HAND-HELD MICRO TERMINAL 5.1.1 General The hand-held micro terminal consists of an encapsulated control box with a 3-metre long cable for connection to the air handling unit by means of a quick connector. The hand-held terminal has an illuminated display, 6 push- buttons and a red LED for indicating alarms. 5.…

  • 71, GB.GOLDLP.170830 www.swegon.com 71 We reserve the right to alter specifications without notice. Available static pressure, Pa Air flow, m 3 /s The lower limit for the airflow when the unit is operating in the airflow regulation mode. Recommended range for the design working point. Permissible operating range when the fan is controlled to operate at a lower speed. If pressure regulation is used, the airflow can be regulated to zero, however this pr…

  • 67, GB.GOLDLP.170830 www.swegon.com 67 We reserve the right to alter specifications without notice. Alarm No.: Function Factory preset value Adjusted value Priority Indication Effect Priority Indication Effect 0=blocked LED 0=Operat. 0=blockedt LED 0=Operat. A=A alarm 0=Off 1=Stop A=A alarm 0=Off 1=Stop B=B alarm 1=On B=B alarm 1=On 1 External fire alarm tripped A**** 1 1* 2 Internal fire alarm tripped A**** …

  • 55, GB.GOLDLP.170830 www.swegon.com 55 We reserve the right to alter specifications without notice. PE LN LNPE 201 202 3A Yellow/Green Extract air fan Blue Brown Blue Yellow/Green Brown Supply air fan Yellow Yellow Transformer Cable, 230 V power supply 230 control voltage, output Power unit LP 05 LP 08 PE PE L1 L3 NL2 3A LN Cable, 400 V power supply 230 control voltage, output Yellow Yellow Transformer Extract air fan Supply air fan Yellow/Green Black…

  • 29, GB.GOLDLP.170830 www.swegon.com 29 We reserve the right to alter specifications without notice. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE 9.5 Operation 9.5.1 Switch clock Basic functions are set at INSTALLATION LEVEL and the values are read and set at USER LEVEL. The switch clock controls the operating tim…

  • 69, GB.GOLDLP.170830 www.swegon.com 69 We reserve the right to alter specifications without notice. Alarm No.: Function Factory preset value Adjusted value Priority Indication Effect Priority Indication Effect 0=blocked LED 0=Operat. 0=blockedt LED 0=Operat. A=A alarm 0=Off 1=Stop A=A alarm 0=Off 1=Stop B=B alarm 1=On B=B alarm 1=On 90 No comm. with press. sensor by EA prefilter B*** 1 0 91 Frost prot. for preheating, below alarm limit A 1 1 92 Frost prot. for preheating sensor, fa…

  • 62, Swegon GOLD LP GB.GOLDLP.170830 62 www.swegon.com We reserve the right to alter specifications without notice. Function Factory-preset value Adjusted value Summer/winter time Inactive X Active Inactive Active Heating Heat exchanger Defrosting X Inactive Active Inactive Active Reheating Exercising X Inact. Pump Valve P+V Inact. Pump Valve P+V Exercise period 3 Min. Interval 24 hrs. «Heating BOOST» Function, Off/On X Inactive Active Inactive Active Start limit, SA temp. (°C) 3,0 Ramp time (%…

  • 14, GB.GOLDLP.170830 14 www.swegon.com We reserve the right to alter specifications without notice. 7.3 Switch clock Basic functions for the switch clock can be preset at INSTALLATION LEVEL under FUNCTIONS/OPERA- TION and the values can be read and set at USER LEVEL. TIME/DATE The current date and time can be set and adjusted whenever required. The switch clock automatically takes leap years into considera- tion. Automat…

  • 61, GB.GOLDLP.170830 www.swegon.com 61 We reserve the right to alter specifications without notice. Function Factory-preset value Adjusted value Flow/pressure Fan Regulation, SA* X Flow Pressure Need Slave Flow Pressure Need Slave Fan Regulation, EA* X Flow Pressure Need Slave Flow Pressure Need Slave Flow, low speed* SA 1) 1) EA 1) 1) Flow, high speed* SA 2) 2) EA 2) 2) Flow, max speed SA 4) 3) 4) EA 4) 3) 4) Flow, min. speed…

  • 26, GB.GOLDLP.170830 26 www.swegon.com We reserve the right to alter specifications without notice. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE 9.3.1.5 Clean Air Control The Clean Air Control function is used in ventilation sys- tems where the aim is to regulate the airflow according to the content of emission/impurities in t…

  • 51, GB.GOLDLP.170830 www.swegon.com 51 We reserve the right to alter specifications without notice. Alarm no. Alarm text Function Priority Stop Indication LED Delay Resetting 0=blocked 0=In operat. 0=Off s=seconds M=manual A=A alarm 1=Stop 1=On m=minutes A=automatic B=B alarm 107 HEATING WATER TEMP I/O-7 BELOW SET POINT. Temperature for heating water control on I/O module is continuously 7°C below its current set point. A*** 1 0 30 m M 108 COOLING WATER …

  • 70, GB.GOLDLP.170830 70 www.swegon.com We reserve the right to alter specifications without notice. 21.3 Ecodesign data Air Handling Units (including GOLD-E), EU regulation 327/2011 fan data, Technical documentation data Datum: 2013-09-19 Impeller diameter Motor power Power input P ed Air Flow q v Pressure increase p fs Speed n mm kW Actual Req 2013 Req 2015 Actual Req 2013 Req 2015 kW m�…

  • 46, Swegon GOLD LP GB.GOLDLP.170830 46 www.swegon.com We reserve the right to alter specifications without notice. Alarm no. Alarm text Function Priority Stop Indication LED Delay Resetting 0=blocked 0=In operat. 0=Off s=seconds M=manual A=A alarm 1=Stop 1=On m=minutes A=automatic B=B alarm 1 EXTERNAL FIRE ALARM TRIPPED For the fire protection function connected to inputs Inp. 1 or Inp. 2. A**** 1* 1 3 s M 2 INTERNAL FIRE ALARM TRIPPED The air handling unit’s supp…

  • 31, Swegon GOLD LP GB.GOLDLP.170830 www.swegon.com 31 We reserve the right to alter specifications without notice. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE…

  • 38, GB.GOLDLP.170830 38 www.swegon.com We reserve the right to alter specifications without notice. 9.12 OPTIMIZE The OPTIMIZE function optimizes the GOLD unit’s airflow rates for the connected WISE system. See the special documentation for WISE. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE
    …

  • 30, GB.GOLDLP.170830 30 www.swegon.com We reserve the right to alter specifications without notice. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE 9.6 Heating 9.6.1 Heat exchanger 8.6.1.1 Defrosting the rotary heat exchanger In environments where the extract air can occasionally be humid, the defrosting functio…

  • 21, Swegon GOLD LP GB.GOLDLP.170830 www.swegon.com 21 We reserve the right to alter specifications without notice. INSTALLATION FUNCTIONS *FUNCTIONS* TEMPERATURE AIR FLOW/PRESSURE FILTER OPERATION HEATING COOLING HUMIDITY IN/OUTPUTS IQnomic Plus ALL YEAR COMFORT OPTIMIZE 9.2.3 Summer Night Cooling The lower temperature at night is utilised to cool down the building structure. This reduces the cooling load during the first hours of the day. If a cooling unit is instal- led, its in-operation hours will be …

  • 10, GB.GOLDLP.170830 10 www.swegon.com We reserve the right to alter specifications without notice. 5.2 Menu tree MAIN MENU (Section 6) USER LEVEL (Section 7) INSTALLATION LEVEL (Section 8-16) GOLD LP TUE 14:40 STOP MANUAL OPERATION STOP? GOLD LP TUE 14:40 MANUAL OPERATION STOP? MAN/AUTO.OP GOLD LP TUE 14:40 STOP? MAN/AUTO.OP SETTINGS TEMPERATURE FLOW/PRESSURE SWITCH CLOCK FILTERS AIR ADJUSTMENT ALARMS INSTALLATION AUTO OPERATION MANUAL LOW S…

  • 13, GB.GOLDLP.170830 www.swegon.com 13 We reserve the right to alter specifications without notice. Min/Max Airflows 7.2 Air flow/Pressure Basic functions are set at INSTALLATION LEVEL and values are read and set at USER LEVEL. Therefore see also Section 9.3, in which the func- tions for flow/pressure are described in detail. 7.2.1 Readings Used for performance checks. 7.2.2 Settings The functions selected at INSTALLATION LEVEL and the min. and max. airflows of each unit si…

Источник

Понравилась статья? Поделить с друзьями:
  • System typeinitializationexception ошибка
  • Sxtrace exe ошибка
  • Sweet home 3d ошибка драйвер directx opengl
  • Sxstrace exe ошибка при запуске игры
  • Sweb ошибка 500