Сообщение ошибка 3041 серьезность 16 состояние 1

Please, Take a look here:
How to troubleshoot «Msg 3041» in SQL Server

Excerpt from page:

Message 3041 is a generic report about the backup failure. To
understand the cause of the error and resolve it, you must use the SQL
Server Error log entries that occur before the 3041 event entry.
Typically, 3041 is preceded by a detailed error message that states
the real reason for the backup failure. The detailed error messages
are written only to the SQL Server error log and to the client
application. The detailed message is not reported in the Application
log in Windows.

Update (After reading @dezso comment)
I’ve seen the «extra error» reported, but I’m not sure that they are related to the backup error. The backup error is dated at 20:31:06, but the «extra error» are dated at 17:53:27, so the extra error happened about 2 hours and 40 minutes before the actual backup error. And these extra error are related to a logon issue.

I don’t think that a logon issue happening at 17:53:27 could result in a backup failing at 20:31:06. So a think that the backup error, and that the «extra error» are unrelated.

I also don’t think that a generic error happening at 17:53:27 could result in a backup failing at 20:31:06 (unless the DB is really big).
@Arviddk report that «my SQL Server backup keeps failing on a lot of the databases» I think it’s safe to assume that «a lot» mean more than 10 DB.
So I think that if a single backup of a single DB take more than 2 hours and 40 minutes, you cant have 10 or 20 DB like that on a single server… or your server will spend it’s life doing only backup. So I assumed that the single backup take a lot less than 2 hours and 40 minutes, so I think that the backup error and the extra error are not related.

And the last «cachestore flush / ‘Bound Trees'» error reported is dated at 06-11-2012 20:30:11, so it’s something happened after the backup error. Anyway a problem related to the cache shouldn’t result in an error (event if it can slow down something).

Some questions
Some questions that could help identify the issue:

• How much time does it take a FULL backup to execute?
• How much time does it take a DIFF backup to execute?
• Does the error happen only on DIFF backup?
• Which percentage of backup does fail? (1%? 10% 50%)
• Maybe you can try to only do FULL backup to check if it’s an issue related to the DIFF backup? (I’ve never done any DIFF backup on SQL Server, I don’t have experience with them)

According to the MS website in the SQL Server log there should be some others error related to the failed backup, but I’m expecting something more near, in time, to the time at which the backup is failing.

SQL Backup Error 3041 – Top Ways to Fix MS SQL Server Error

Summary: This blog will provide the complete and easiest way to fix SQL backup error 3041. Simply read the complete article carefully to get rid of this error immediately. The task isn’t that hectic if users clarify their technicalities in the SQL database. All you need is a tutorial like this one.

MS SQL Backup Error 3041 – Know What Exactly it is

Backup error 3041 is a generic error that is returned when a backup fails. Along with this error, there are additional errors returned and can be found in the SQL Server log, so we can also call it SQL server backup log error 3041.

After understanding about this MS SQL backup error. Now, let’s proceed further to know more about this issue with the help of user’s real-time scenario.

User’s Real-time Scenario

#Query 1: Hi, currently I am working on to resolve this error:

“Error: 3041, Severity: 16, State: 1 BACKUP failed to complete the command BACKUP DATABASE WITH DIFFERENTIAL. Check the backup application log for detailed messages.“

I had a full backup of the database, but somehow I failed earlier today in the morning. I checked the event viewer which also indicates to check the backup application log. So, how to check backup application log? Or any ideas to solve this MS SQL 3041 backup error problem. If yes? then please suggest me. Thank you very much in advance

#Query 2: Backup Error: 3041, Severity: 16, State: 1.

This SQL error 3041 backup failed message prompts after I failed from taking backup. Now, I need an efficient solution to fix this issue. Thanks.

Quick Solution: In some cases, this MS SQL backup error 3041 occurs due to the corruption issues. So, you should check that database is free from any type of corruption.

However, you should check all the configuration changes you have made. Also, be sure to reboot the system every time a new database is added to the server and a full backup is performed after rebooting the local system.

Note: The above-stated solution is not a proficient one to fix SQL server backup failed error 3041. So, in this situation, you can choose an alternative method to get satisfactory results. In the oncoming section, we will discuss the same. Get a quick look:

An Eminent Way to Fix SQL Backup Error 3041 Without Data Loss

After considering the above-mentioned queries we would like to provide you a rapid solution named SQL Backup Recovery. Using this amazing utility, you can easily get rid of this SQL backup error 3041 without data loss.

The tool has an explanatory and understandable interface. O, any user either novice or technical can operate it without taking any expertise help. However, you can download it on any Windows OS machine because it extensively supports all editions of Windows Operating System.

So, let’s proceed ahead to the oncoming section, where we will disclose the steps to fix SQL error 3041 backup failed.

Steps to Resolve SQL Server Backup Failed Error 3041 Issue

Here, in this section, we will disclose the instruction to fix SQL server backup log error 3041. You just have to follow all the steps to execute the procedure. Let’s begin:

Step 1: Download free demo version of the eminent utility by selecting the download button.

Download Now Purchase Now

Step 2: Click Browse button to add SQL Server BAK files. Then, select the version of your SQL backup file.

Step 3: Now, choose the Multiple Backup file options to backup and export multiple BAK files at once.

Step 4: Select the preferred files and click on the Recover button to backup file which is corrupted and showing error.

Step 5: After completion of the scanning and recovering data components process. Opt the desired elements and hit on the Export button.

Step 6: Choose Export to between SQL Server Database and SQL Server Compatible SQL Scripts. And opt Database Authentication option then, add all the details.

Step 7: Click on the required SQL database items and choose export option between with Schema & Data and With only Schema.

Step 8: Press the Export button to export recovered backup file to the SQL Server Database.

Step 9: At last, the application will pop-up a message after successful completion of the backup procedure.

Attention Note: The free download version allows you to export only 25 records. So, it is better to go with the purchase edition of the application.

Concluding Thoughts

How to fix SQL backup error 3041? It is a most commonly asked query by the MS SQL users. SQL server backup failed error 3041 can be occur anytime to anyone. So, by performing the above-suggested solutions, you can fix this SQL error 3041 backup failed without any data loss.

Доброго времени суток!
Имеется сервер с настроенным бэкапом баз в ночное время. До недавнего времени все происходило штатно, по расписанию.
Сегодня ночью бэкап баз создан не был.

Логи MSSQLServer говорят следующее:

2017-05-30 03:40:35.18 spid67 BackupDiskFile::CreateMedia: Backup device ‘X:\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup\BD\BD_backup_name.bak’ failed to create. Operating system error 5(Отказано в доступе.).
2017-05-30 03:40:35.18 Ошибка: 3041, серьезность: 16, состояние: 1.

Системный журнал приложений говорит тоже самое:

BackupDiskFile::CreateMedia: устройству резервного копирования «Х:\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Backup\BD\BD_backup_name.bak» не удалось выполнить create. Ошибка операционной системы 5(Отказано в доступе.).

Никаких изменений ни в систему ни в SQLServer не вносилось. Права доступа не изменялись. Подскажите в какую сторону смотреть, куда копать.

Проблема:  Иногда при ночном создании бекапа базы 1С 7.7, на MS SQL Server 2008, получаем ошибку Error: 3041, Severity: 16, State: 1. Check the backup application log, но если запускать утром вручную — выполняется нормально.
Источники:
Error: 3041, Severity: 16, State: 1. Check the backup application log
v7: Не получается создать бекап на сетевой диск
Решение: В нашем случае — начать бекап не позволяла задача CheckDB, выполняющаяся за 5 минут до старта бекапа, и блокирующая базу.
Помог перенос старта задачи на 10 минут, чтобы они не пересекались.