Системная ошибка 1051

This solution applies to all those services, with which you’re facing Error 1051.

Services errors are quite common when you’ve to manage different services and start/stop them for various purpose. Each service in Windows behaves differently and some services may stop in single instance while there are some other services which you can’t stop in single shot. This article talks about one such case when you’re unable to stop a running/started service.

In this example, while stopping the Network Location Awareness service, we greeted with following error:

Page Contents

Windows could not stop the Network Location Awareness service on Local Computer.

Error 1051: A stop control has been sent to a service which other running services are dependent on.

FIX Error 1051 A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10

This error may occur with any other service as well. Here, while you stop concerned service, it sends stop signal to dependent services. However, it might be possible that some of those dependent services may refuse the stop signal. So if either of those dependent services refuses stop signal, the main or concerned service would not be able to stop and hence the error message.

To deal with this problem, you can try following fixes:

FIX: Error 1051: A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10/8.1/8/7

FIX 1 – Stop The Dependency Services First

1. Open Services snap-in and locate the service with which you’re facing this issue and select Properties.

FIX Error 1051 A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10

2. On the property sheet, on the Dependencies tab, check the list of dependent services. You need to first stop these dependency services.

FIX Error 1051 A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10

3. Once you stopped dependency services, retry to stop problematic or concerned service. This time it should stop as expected.

FIX Error 1051 A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10

FIX 2 – Using Command Prompt

1. Open administrative Command Prompt.

2. Run following command after substituting the issued service name. The service name can be found on the service property sheet, General tab.

net stop <ServiceName> /yes

* Substitute <ServiceName> with actual service name. For e.g. net stop NlaSvc /yes.

FIX Error 1051 A Stop Control Has Been Sent To A Service Which Other Running Services Are Dependent On In Windows 10

This method is quite quick and easy to stop the concerned service.

Here’s the video to illustrate this fix:

Hope this helps you!

READ THESE ARTICLES NEXT

  • How to remove a service in Windows 11
  • Fix: Windows Could Not Start The Peer Networking Grouping Service On Local Computer
  • Fix: The service did not respond to the start or control request in a timely fashion
  • Fix: Windows could not start the Windows Update service on Local Computer
  • Fix Error 1061: The service cannot accept control messages at this time
  • How to Disable Antimalware Service Executable in Windows 11
  • The Windows Installer Service could not be accessed in Windows 11
  • How to delete services in Windows 11/10
  • Fix: Error 1058 The service cannot be started in Windows 10
  • Fix Error 1069: The service did not start due to a logon failure

Вопрос:

У меня есть ServiceA, ServiceB и ServiceC. ServiceB зависит от ServiceA, ServiceC зависит от ServiceB.

Целевая зависимость:

ServiceA <- ServiceB <- ServiceC

Когда я открываю службы Windows, затем нажимаю на ServiceA и ударяю перезагрузку, я получаю сообщение об ошибке:

Ошибка 1051 Stop Control был отправлен службе, которую другие запущенные службы зависят от

Проблема в том, что Windows пытается остановить ServiceB до ServiceC.

Эта настройка работает в системах до Windows 10. В pre-Windows 10 ServiceC будет остановлен сначала, затем ServiceB, затем A.

Я попытался изменить порядок, в котором я устанавливал зависимости. Я попытался создать группу обслуживания и установить порядок запуска в реестре в GroupOrderList. Ничего не влияет, и перезапуск всегда выбирает один и тот же порядок и терпит неудачу.

Из powershell я могу запустить службу перезапуска ServiceA -force, и все службы перезапускают правильно без ошибок.

Это, по-видимому, проблема с диспетчером служб Windows.

Как я могу гарантировать, что услуги будут остановлены в правильном порядке?

I have ServiceA, ServiceB, and ServiceC.  ServiceB depends on ServiceA, ServiceC depends on ServiceB.

Dependency chain:

ServiceA <- ServiceB <- ServiceC

When I open Services desktop app ( Services.msc ), then click on ServiceA and hit restart, I get an error:

Error 1051 Stop Control has been sent to a service that other running services are dependent on

The problem is that windows attempts to stop ServiceB before ServiceC.  

This setup works in pre-Windows 10 systems.  In pre-Windows 10, ServiceC would be stopped first then ServiceB then A.

I have tried altering the order in which I set the dependencies.  I have tried creating a servicegroup and setting the startup order in the registry under GroupOrderList.  Nothing has any effect, and the restarting always picks the same order and
fails.

From powershell, I can run restart-service ServiceA -force, and all services restart correctly without an error.

This appears to be an issue with the Windows service manager.

  • Moved by

    Monday, August 7, 2017 5:52 AM
    Windows 10

  • Deployment image servicing and management tool (dism.exe) : While try to mounting image of the WIM file, i faced an error which are listed…

  • Unable to connect to the internet : «Error 106 ( net::ERR_INTERNET_DISCONNECTED ): The internet connection has been lost» . Th…

  • Event 1017, Security-SPP: Installation of the Proof of Purchase failed . 0xC004F050 Partial Pkey=BBBBB ACID=? Detailed Error [?] log n…

  • Windows update could not be installed because of error 2359302 «» (Command line : «»C:\Windows\system32\ wusa.exe «…

  • Error 200 (net::ERR_CERT_COMMON_NAME_INVALID): Unknown error. I got the above error while try to access the gmail login page on the chrome…

  • Event 131, DeviceSetupManager: Metadata staging failed, result={00000000-0000-0000-FFFF-FFFFFFFFFFFF} for container ‘0x80072F78’ …

  • Event Type mptelemetry,P1 8024402c,P2 endsearch,P3 search,P4 3.0.8107.0,P5 mpsigdwn.dll,P6 3.0.8107.0,P7 microsoft security essentials (e…

  • SharedAccess_NAT: The DHCP allocator has disabled itself on ip address 192.168.1.2,since the IP address is outside the 192.168.137.0/255.2…

  • Session «Microsoft Security Essentials OOBE» stopped due to the following error:0xC000000D Log name :Microsoft-windows-Kernel-E…

  • Gateway resolution failed on interface {766c117a-e333-4f3b-b483-47a55fb39163} for 192.168.1.1 with error : 0x43. Note: For the interface {5…

Is Network Location Awareness Error 1051 appearing? Would you like to safely and quickly eliminate Network Location Awareness which additionally can lead to a blue screen of death?

When you manually edit your Windows Registry trying to take away the invalid error 1051 a stop control keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

Troubleshooting network location awareness error 1073741288 Windows XP, Vista, 7, 8 & 10

Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Network Location Awareness Error 1051 complications.

Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the Network error) likewise as any broken hyperlinks inside of your registry.

Issue with the network location awareness service terminated with service-specific error

Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

  • http://www.bleepingcomputer.com/forums/t/187184/network-list-and-location-awareness-services-fail-to-start/
  • http://computerstepbystep.com/network_location_awareness_service.html
  • https://blogs.technet.microsoft.com/rmilne/2012/04/05/exchange-services-not-starting-due-to-network-location/
  • http://batcmd.com/windows/7/services/nlasvc/

Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

Fixed: network location awareness disable

Symptoms of Network Location Awareness Error 1051
“Network Location Awareness Error 1051” appears and crashes the energetic method window.
Your Personal computer routinely crashes with Network Location Awareness Error 1051 when running the exact same system.
“Network Location Awareness Error 1051” is shown.
Windows operates sluggishly and responds little by little to mouse or keyboard input.
Your computer periodically “freezes” for the number of seconds in a time.

Will cause of Network Location Awareness Error 1051

Corrupt obtain or incomplete set up of Windows Operating System software program.

Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

Another method maliciously or mistakenly deleted Windows Operating System-related files.

Mistakes this sort of as “Network Location Awareness Error 1051” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

Simply click the beginning button.
Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
Although keeping CTRL-Shift in your keyboard, hit ENTER.
You’re going to be prompted that has a authorization dialog box.
Click on Of course.
A black box will open having a blinking cursor.
Variety “regedit” and hit ENTER.
Within the Registry Editor, choose the error 1051 a stop control connected key (eg. Windows Operating System) you wish to back again up.
Within the File menu, choose Export.
Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
From the Export Vary box, ensure that “Selected branch” is selected.
Click on Help you save.
The file is then saved by using a .reg file extension.
You now use a backup within your network location awareness error 1073741288 related registry entry.

Solution to your disable network location awareness windows 7 problem

There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

Additional Measures:

One. Conduct a Thorough Malware Scan

There’s a probability the Location Network Awareness 1051 Error error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Network Location Awareness Error 1051 is actually connected to some element of that malicious plan itself.

2. Clean network location awareness group policy Disk Cleanup

The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an Error error because of possible conflicts or from overloading your hard drive.

Once you clean up these types of files using Disk Cleanup it could not just remedy Network Location Awareness Error 1051, but could also create a dramatic change in the computer’s efficiency.

Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up Network Location discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Network error associated with your temporary files.

How Disk Cleanup can help network location awareness service won’t start

1. Click your ‘Start’ Button.
2. Style ‘Command’ into your search box. (no ‘enter’ yet)
3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
4. You will see a ‘permission dialogue’ box.
5. Click ‘Yes’
6. You will see a black box open up plus a blinking cursor.
7. Variety in ‘cleanmgr’. Hit ‘Enter’.
8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
10. Verify the boxes that you want cleaned. Click ‘OK’.

How to repair network location awareness service not starting

3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

Network Location

Manufacturer

Device

Operating System


Network Location Awareness Error 1051


5 out of
5

based on
39 ratings.

 

Понравилась статья? Поделить с друзьями:
  • Системная ошибка 1084
  • Системная ошибка 1073422314 при установке microsoft office 2013
  • Системная ошибка 1012 мобайл легенд
  • Системная ошибка 1073
  • Системная ошибка 10060