Serum ошибка пресетов

1. How to Find Serum’s Presets Folder

The first good news: you don’t have to close your DAW. Simply navigate to Serum’s Menu in the top-right, and select Show Serum Presets Folder.

Your OS’s file browser will open up at the correct system folder containing Serum’s factory presets.

2. How to Add your New Serum Presets

Here we’ve downloaded and unzipped our Melodic Techno — Serum Presets pack. Among the folders, there’s one containing ‘SERUM_PRESETS’. Folder names may vary, depending on the pack, of course.

All Serum presets have the file extension FXP – regardless of whether you’re on Mac or PC.

Now we can copy or move the entire new folder from our Downloads into the Serum Presets folder that we opened via Serum, in the ‘Presets’ folder, as shown here.

When we return to Serum, go back to the same menu and select Rescan folders on disk.

Our new presets now show up alongside Serum’s Factory bank.

It’s worth renaming the folder to something more relevant. You can do this using your OS file browser, and Rescan the folder in Serum once again for this to take effect. See our notes about how best to organise your Serum presets at the end of this article for more info.

3. Installing Serum Noises, Wavetables and LFOs

With your presets installed, sometimes the newly-created wavetables, noises and LFOs, made by the sound designer will be installed as part of the FXP patch, but sometimes not.

If your preset fails to produce noise when loaded, you may need to load the required wavetables into Serum as well. Serum can also bring up an error message when it can’t find a certain element, as shown below.

In this case, your downloaded preset pack should contain custom wavetables, noises and/or LFOs to drag into Serum’s other preset folders. Depending on the developer, the destination could be in the User folder for the Noise, Wavetable or other element, but the most likely way to get the sound working is to simply drag the included folder straight into the relevant directory in Serum. Don’t forget to Rescan folders on disk after this.

4. Using Imported Wavetables, LFO Shapes and Noises in your own Serum Patches

Once any Noises, ‘Tables’, and LFO Shapes are imported into Serum, you can also freely bring them into any patch you’re working on elsewhere.

5. Organising your Third-Party Serum Presets

You might have noticed Serum’s User folder, where it stores presets that you save yourself. We recommend not installing whole Serum preset packs here, to prevent confusion. It’s even more useful to save your presets in a folder of their own if your pack is based on a particular genre (such as a pack like Tropical House — Serum Presets, or a certain mood, like our pack Dark Cinematic — Serum Presets.

Remember that Serum can’t access folders within folders, so if you do attempt to install your third-party packs within the User folder, you can only drag the individual FXP presets in – only one layer of folders will ever be visible, and that’s the top layer with ‘Serum Presets’

Источник

How To Install Serum Presets on Mac & Windows

Home » Blog » How To Install Serum Presets on Mac & Windows

Table of Contents

Serum is probably the most popular VST synth of our time. It sounds great, looks stunning, is easy to understand, plus there are plenty of Serum presets and skins available. Since not everyone knows how to install Serum presets I decided to write this tutorial for you guys.

Fortunately, it doesn’t matter if you’re using Mac or Windows, Ableton or FL Studio.

The process is always the same!

Open Serum’s Presets Folder

Start by opening Serum.

Now go to the menu in the top right corner and click “Show Serum Presets folder”.

You should see these folders (this screenshot is a bit old by now, so you should see some additional ones):

If you can NOT find Serum’s preset folder there’s a good chance you haven’t installed a legit license, so make sure to purchase one. It’s worth it 😉

Paste Your New Presets

Now paste the pack you’d like to install in the presets folder. Some preset banks may come with additional LFO shapes, noises, wavetables or skins. Just drag each of those categories in the matching folder, too. Wavetables go to “Tables”, noises go into “Noises” and so on.

Have fun

Go ahead and open Serum. You’ll find all patches in Serum’s browser. If you can’t open some of the presets you probably haven’t installed the latest update yet.

..and this is how to install Serum presets! Easy, right? 😉

Источник

Скачивая пресеты Serum у некоторых возникает вопрос, а как установить данные пресеты, чтобы они отображались в синтезаторе и полноценно работали в вашей DAW. Разберёмся в этом вопросе.

Шаг 1.

Скачивая пресеты, первое, на что вы должны обратить внимание — версия, для которой созданы данные пресеты. Иначе после установки они будут отображаться в папке Serum, но загружаться, то есть работать не будут.

Как узнать версию?

• Для этого открываете Serum вверху будет четыре окна OSX, FX, MATRIX, GLOBAL. Нам нужно нажать на окно GLOBAL.
• Справа под огромным значком XRER RECORDS будет написана версия (BUILD) в формата X.XXX и дата. Вот и всё.

Все пресеты на сайте NSS созданы для версии Serum 1.334 и выше.

Шаг 2.

Версия подходит. Отлично. Скачиваем нужный пресет.

Если вы скачиваете его с нашего сайта. То алгоритм следующий:

• Выбираем понравившийся пресет и кликаем на его.

Пресет загружается архивом формата .rar. Поэтому если у вас нет распаковщика архивов .rar, его нужно будет установить. Например, программа Win RAR для Windows.

Шаг 3.

После загрузки у вас будет два файла в архиве. Один пресет .fxp, другой текст .txt с подсказкой установки пресета.

Теперь мы открываем папку Serum, где находятся пресеты. Путь следующий:

Мой компьютер/C/Пользователи/ имя пользователя /Мои документы/Xfer/Serum Presets/Presets

У вас откроется следующее окно:

Шаг 4.

Выбираем папку Presets и закидываем туда файл .fxp.

Шаг 5 .

Перезагружаем DAW. Запускаем SERUM и находим наш пресет.

В папке Presets можно создавать свое папки и рассортировать пресеты. Но желательно их называть английскими названиями, иначе они могут работать не корректно.

Всем удачи в творчестве!

Спасибо, что читаете New Style Sound ( RSS-лента ). Подписывайтесь на новости или RSS и делитесь статьями с друзьями. Что такое RSS ( читать ). Скачивайте также бесплатные плагины на сайте.

Источник

Serum Presets Folder

Listing Of Websites About serum presets folder

Serum Original Presets Folder Download — exerciselab.co

Posted at: 6 days ago | Categories: FAQs | 278 People Used View Detail

Serum Tutorial: How to Change the Preset Folder …

Posted at: 1 week ago | Categories: FAQs | 399 People Used View Detail

Serum Stock Presets Folder Download — openfls.beliba.co

Posted at: 2 days ago | Categories: FAQs | 436 People Used View Detail

How To Install Serum Presets — Quick 2 Minute …

Posted at: 1 week ago | Categories: FAQs | 429 People Used View Detail

Free Serum Presets (Best of 2021) — BVKER

Posted at: 1 week ago | Categories: FAQs | 294 People Used View Detail

Xfer Serum Presets Folder Download — nlnfls.storegear.co

Posted at: 1 week ago | Categories: FAQs | 478 People Used View Detail

How To Install Serum Presets on Mac & …

Posted at: 1 week ago | Categories: FAQs | 333 People Used View Detail

Managing plugin preset folder and content …

Posted at: 1 day ago | Categories: FAQs | 118 People Used View Detail

Serum Presets Free Download — Xfer Serum …

Posted at: 5 days ago | Categories: FAQs | 111 People Used View Detail

How to Install Serum Presets, Wavetables, …

Posted at: 2 days ago | Categories: FAQs | 131 People Used View Detail

Serum preset location : edmproduction — reddit

URL: https://www.reddit.com/. /serum_preset_location Go now

Posted at: 5 days ago | Categories: FAQs | 412 People Used View Detail

Downloading and importing Serum presets – Help Center

Posted at: 1 day ago | Categories: FAQs | 155 People Used View Detail

Xfer Records Serum Presets | Samplified

Posted at: 1 week ago | Categories: FAQs | 368 People Used View Detail

How to install Serum presets, wavetables, LFO’s & …

Posted at: 1 week ago | Categories: FAQs | 465 People Used View Detail

How to Install Serum Presets — Gravitas Create

Posted at: 1 week ago | Categories: FAQs | 349 People Used View Detail

Where can i find my presets folder? (skyrim) :: The Elder .

Posted at: 4 days ago | Categories: FAQs | 195 People Used View Detail

How To Install Xfer Serum Presets (Ultimate Guide .

Posted at: 3 days ago | Categories: FAQs | 308 People Used View Detail

Another Enigma | How To | Add Custom Serum Presets

Posted at: 1 week ago | Categories: FAQs | 464 People Used View Detail

Serum Presets: The Best Free/Paid Packs in Each Genre .

Posted at: 6 days ago | Categories: FAQs | 472 People Used View Detail

How To Install a Serum Preset — Serum Tutorial — …

Posted at: 1 week ago | Categories: FAQs | 381 People Used View Detail

Serum Skins Folder Download — everamber

Posted at: 1 week ago | Categories: FAQs | 92 People Used View Detail

Free Serum Presets — Over 500 Presets & Wavetables

Posted at: 2 days ago | Categories: FAQs | 225 People Used View Detail

How To Install Serum Presets (For PC) — YouTube

Posted at: 2 days ago | Categories: FAQs | 494 People Used View Detail

Xfer Serum Vst Free Download v1.28b6 (Setup+Presets)

Posted at: 1 week ago | Categories: FAQs | 225 People Used View Detail

The 15 Best Serum Skins of All Time — Ultimate List

Posted at: 6 days ago | Categories: FAQs | 148 People Used View Detail

481 Serum Presets the Ultimate Serum Bundle | …

Posted at: 3 days ago | Categories: FAQs | 327 People Used View Detail

Loading Synth Presets From Splice – Help Center

Posted at: 6 days ago | Categories: FAQs | 124 People Used View Detail

Источник

Serum Presets Folder

Listing Of Websites About serum presets folder

Serum Original Presets Folder Download — exerciselab.co

Posted at: 3 days ago | Categories: FAQs | 278 People Used View Detail

Serum Tutorial: How to Change the Preset Folder …

Posted at: 1 week ago | Categories: FAQs | 399 People Used View Detail

Serum Stock Presets Folder Download — openfls.beliba.co

Posted at: 4 days ago | Categories: FAQs | 436 People Used View Detail

How To Install Serum Presets — Quick 2 Minute …

Posted at: 4 days ago | Categories: FAQs | 429 People Used View Detail

Free Serum Presets (Best of 2021) — BVKER

Posted at: 6 days ago | Categories: FAQs | 294 People Used View Detail

Xfer Serum Presets Folder Download — nlnfls.storegear.co

Posted at: 5 days ago | Categories: FAQs | 478 People Used View Detail

How To Install Serum Presets on Mac & …

Posted at: 1 week ago | Categories: FAQs | 333 People Used View Detail

Managing plugin preset folder and content …

Posted at: 1 week ago | Categories: FAQs | 118 People Used View Detail

Serum Presets Free Download — Xfer Serum …

Posted at: 1 week ago | Categories: FAQs | 111 People Used View Detail

How to Install Serum Presets, Wavetables, …

Posted at: 4 days ago | Categories: FAQs | 131 People Used View Detail

Serum preset location : edmproduction — reddit

URL: https://www.reddit.com/. /serum_preset_location Go now

Posted at: 1 week ago | Categories: FAQs | 412 People Used View Detail

Downloading and importing Serum presets – Help Center

Posted at: 2 days ago | Categories: FAQs | 155 People Used View Detail

Xfer Records Serum Presets | Samplified

Posted at: 1 week ago | Categories: FAQs | 368 People Used View Detail

How to install Serum presets, wavetables, LFO’s & …

Posted at: 3 days ago | Categories: FAQs | 465 People Used View Detail

How to Install Serum Presets — Gravitas Create

Posted at: 3 days ago | Categories: FAQs | 349 People Used View Detail

Where can i find my presets folder? (skyrim) :: The Elder .

Posted at: 3 days ago | Categories: FAQs | 195 People Used View Detail

How To Install Xfer Serum Presets (Ultimate Guide .

Posted at: 1 week ago | Categories: FAQs | 308 People Used View Detail

Another Enigma | How To | Add Custom Serum Presets

Posted at: 1 week ago | Categories: FAQs | 464 People Used View Detail

Serum Presets: The Best Free/Paid Packs in Each Genre .

Posted at: 2 days ago | Categories: FAQs | 472 People Used View Detail

How To Install a Serum Preset — Serum Tutorial — …

Posted at: 1 day ago | Categories: FAQs | 381 People Used View Detail

Serum Skins Folder Download — everamber

Posted at: 1 week ago | Categories: FAQs | 92 People Used View Detail

Free Serum Presets — Over 500 Presets & Wavetables

Posted at: 1 week ago | Categories: FAQs | 225 People Used View Detail

How To Install Serum Presets (For PC) — YouTube

Posted at: 2 days ago | Categories: FAQs | 494 People Used View Detail

Xfer Serum Vst Free Download v1.28b6 (Setup+Presets)

Posted at: 1 week ago | Categories: FAQs | 225 People Used View Detail

The 15 Best Serum Skins of All Time — Ultimate List

Posted at: 2 days ago | Categories: FAQs | 148 People Used View Detail

481 Serum Presets the Ultimate Serum Bundle | …

Posted at: 1 week ago | Categories: FAQs | 327 People Used View Detail

Loading Synth Presets From Splice – Help Center

Posted at: 1 week ago | Categories: FAQs | 124 People Used View Detail

Источник

Скачивая пресеты Serum у некоторых возникает вопрос, а как установить данные пресеты, чтобы они отображались в синтезаторе и полноценно работали в вашей DAW. Разберёмся в этом вопросе.

Serum. Как установить пресеты?

Шаг 1.

Скачивая пресеты, первое, на что вы должны обратить внимание — версия, для которой созданы данные пресеты. Иначе после установки они будут отображаться в папке Serum, но загружаться, то есть работать не будут.

Все пресеты на сайте NSS созданы для версии Serum 1.334 и выше.

Шаг 2.

Версия подходит. Отлично. Скачиваем нужный пресет.

Если вы скачиваете его с нашего сайта. То алгоритм следующий:

Шаг 3.

Теперь мы открываем папку Serum, где находятся пресеты. Путь следующий:

Мой компьютер/C/Пользователи/ имя пользователя /Мои документы/Xfer/Serum Presets/Presets

У вас откроется следующее окно:

Шаг 4.

Перезагружаем DAW. Запускаем SERUM и находим наш пресет.

В папке Presets можно создавать свое папки и рассортировать пресеты. Но желательно их называть английскими названиями, иначе они могут работать не корректно.

Всем удачи в творчестве!

Спасибо, что читаете New Style Sound ( RSS-лента ). Подписывайтесь на новости или RSS и делитесь статьями с друзьями. Что такое RSS ( читать ). Скачивайте также бесплатные плагины на сайте.

Источник

How To Install Serum Presets on Mac & Windows

Home » Blog » How To Install Serum Presets on Mac & Windows

Table of Contents

Serum is probably the most popular VST synth of our time. It sounds great, looks stunning, is easy to understand, plus there are plenty of Serum presets and skins available. Since not everyone knows how to install Serum presets I decided to write this tutorial for you guys.

Fortunately, it doesn’t matter if you’re using Mac or Windows, Ableton or FL Studio.

The process is always the same!

Open Serum’s Presets Folder

Start by opening Serum.

Now go to the menu in the top right corner and click “Show Serum Presets folder”.

You should see these folders (this screenshot is a bit old by now, so you should see some additional ones):

If you can NOT find Serum’s preset folder there’s a good chance you haven’t installed a legit license, so make sure to purchase one. It’s worth it 😉

Paste Your New Presets

Now paste the pack you’d like to install in the presets folder. Some preset banks may come with additional LFO shapes, noises, wavetables or skins. Just drag each of those categories in the matching folder, too. Wavetables go to “Tables”, noises go into “Noises” and so on.

Have fun

Go ahead and open Serum. You’ll find all patches in Serum’s browser. If you can’t open some of the presets you probably haven’t installed the latest update yet.

..and this is how to install Serum presets! Easy, right? 😉

Источник

1. How to Find Serum’s Presets Folder

The first good news: you don’t have to close your DAW. Simply navigate to Serum’s Menu in the top-right, and select Show Serum Presets Folder.

Your OS’s file browser will open up at the correct system folder containing Serum’s factory presets.

2. How to Add your New Serum Presets

All Serum presets have the file extension FXP – regardless of whether you’re on Mac or PC.

Now we can copy or move the entire new folder from our Downloads into the Serum Presets folder that we opened via Serum, in the ‘Presets’ folder, as shown here.

When we return to Serum, go back to the same menu and select Rescan folders on disk.

Our new presets now show up alongside Serum’s Factory bank.

It’s worth renaming the folder to something more relevant. You can do this using your OS file browser, and Rescan the folder in Serum once again for this to take effect. See our notes about how best to organise your Serum presets at the end of this article for more info.

3. Installing Serum Noises, Wavetables and LFOs

With your presets installed, sometimes the newly-created wavetables, noises and LFOs, made by the sound designer will be installed as part of the FXP patch, but sometimes not.

If your preset fails to produce noise when loaded, you may need to load the required wavetables into Serum as well. Serum can also bring up an error message when it can’t find a certain element, as shown below.

In this case, your downloaded preset pack should contain custom wavetables, noises and/or LFOs to drag into Serum’s other preset folders. Depending on the developer, the destination could be in the User folder for the Noise, Wavetable or other element, but the most likely way to get the sound working is to simply drag the included folder straight into the relevant directory in Serum. Don’t forget to Rescan folders on disk after this.

4. Using Imported Wavetables, LFO Shapes and Noises in your own Serum Patches

Once any Noises, ‘Tables’, and LFO Shapes are imported into Serum, you can also freely bring them into any patch you’re working on elsewhere.

5. Organising your Third-Party Serum Presets

Remember that Serum can’t access folders within folders, so if you do attempt to install your third-party packs within the User folder, you can only drag the individual FXP presets in – only one layer of folders will ever be visible, and that’s the top layer with ‘Serum Presets’

Источник

serum presets folder not found

bad65

Hi, I installed the demoversion of Serum on win10 with Ableton Live9 and when I start the plugin It says «serum presets folder not found». I clicked the screen and serum presets folder opens but is not regognized in Serum. What to do?

steve_xfer

Hope this helps,
Steve

bad65

bokadry

Hey I have the same issue, the difference is that I purchased serum a couple years ago but the other day I have to format my Mac and now its not working. Some advice please

therightkey

I am having the same issue, but there is no AV software on my computer

steve_xfer

Make sure you have run the full version installer. It’s hard to know what «same issue» means without more description.

Windows Key + R (Run)
%APPDATA%XferSerum

delete the Serum.cfg file there.

Do you see DocumentsXferSerum Presets
Are there files in the subfolders, or just empty folders?

therightkey

Apologies. Serum installed fine and was located by Ableton with no problem. When I opened it in the DAW a message came up saying presets were not found. After locating the presets folder there was only one folder called «skins». I tried re-installing serum and now the software appears to be working just fine. When I checked the presets folder everything was there. I thought I had installed the full version, but I must not have. User error… Thank you for your time!

Au5t1n

I am having the same issue, but there is no AV software on my computer

Me too…
Yesterday i bought it and it worked fine but now it says plugin folder not found, but when i set it it says again… on and on…. the thing is the folders not empty…

steve_xfer

Please use the support page for support and include your OS information.

Источник

Serum VST скачать торрент v1.214b4 FL Studio 12/20 32/64bit крякнутый бесплатно на русском языке

Также доступен для скачивания:

Видео-инструкция по установке и активации Serum 1.214b4

Если видео не работает, обновите страницу или сообщите об этом в комментариях, поправлю.

Системные требования:

Процессор: Multicore processor in excess of 2GHz is recommended
Windows: 7/8/8.1/10 (32/64-bit)
Оперативная память: 2GB or more
DAW : FL Studio/Cakewalk Sonar/Steinberg Cubase и т.п.
Язык интерфейса: Английский
Таблэтка: не требуется

Размер: 232.6 Mb

Простой в использовании

После краткой и безболезненной установки вы получите интерфейс с непревзойденной прямотой и приветственной ясностью. Учитывая количество сложных, запутанных и непоследовательных синтезаторных панелей, с которыми я каждый день работаю, скажу что работать с Serum это одно удовольствие.

Я даже не мог придраться к серому фону, так как он отлично выделяет тонко окрашенные вэйвформы, фильтры, конверты и LFO. Я сомневаюсь, что кто-то будет искать руководство пользователя для этого интерфейса.

Serum поставляется с около 450 заводских звуков. Беглый осмотр показывает всё богатство ярких, звуков, как вы вероятно и ожидаете. Не менее впечатляющими являются жесткие, глубокие и режущие басы.

Прогуливаясь по коллекции, вы окажетесь под впечатлением от мерцающих верхов и каменных низов, приправленных острыми как бритва серединой. Мне показалось странным, что очевидная способность к атмосферике и кинематографическому звуковому дизайну не была более изучена.

Высокое качество Serum

С момента своего выпуска Serum быстро стал самым популярным программным синтезатором для производства музыки. На музыкальном рынке нет другого такого синтезатора, который использовался профессионалами также широко как Serum.

Serum имеет огромное разнообразие высококачественных пресетов. Serum является мощным инструментом необходимым для добавления в ваш арсенал.

Достоинства Serum

Скачав торрент Serum VST вы получите гибкие осцилляторы: вы можете манипулировать сигналами с ваших генераторов частоты с легкостью. Простой в использовании, рабочий процесс прост как никогда.

Недостатки Serum

Как вы можете видеть, преимущества владения Serum намного перевешивают недостатки синтезатора. Serum был разработан с учетом потребностей каждого пользователя!

Источник

Важно! Перед началом скачивания и установки необходимо ОТКЛЮЧИТЬ АНТИВИРУС, иначе кейген может быть удалён.

Serum VST скачать торрент v1.214b4

Xfer Records — Serum 1.35b1 VST крякнутый для FL Studio 20 скачать торрент [168 MB]

Также доступен для скачивания:

Serum 2

• iZotope Nectar 2
• iZotope Nectar 3
• iZotope Ozone 8
• и многие другие плагины

Видео-инструкция по установке и активации Serum 1.214b4

Если видео не работает, обновите страницу или сообщите об этом в комментариях, поправлю.

Ссылка на видео: https://disk.yandex.ru/i/12oRxsOLAutnKg

Видео-инструкция по установке и активации

Serum — это первый синтезатор от Xfer Records, создателей бесконечно полезного инструмента LFO Tool. Его цели просты: быть «синтезатором мечты», производящим высококачественный звук. Простота и удобство интерфейса, всё хорошо «заточено» под рабочий процесс. Обязательно скачайте торрент Serum VST.

Простой в использовании

После краткой и безболезненной установки вы получите интерфейс с непревзойденной прямотой и приветственной ясностью. Учитывая количество сложных, запутанных и непоследовательных синтезаторных панелей, с которыми я каждый день работаю, скажу что работать с Serum это одно удовольствие.

Я даже не мог придраться к серому фону, так как он отлично выделяет тонко окрашенные вэйвформы, фильтры, конверты и LFO. Я сомневаюсь, что кто-то будет искать руководство пользователя для этого интерфейса.

Serum поставляется с около 450 заводских звуков. Беглый осмотр показывает всё богатство ярких, звуков, как вы вероятно и ожидаете. Не менее впечатляющими являются жесткие, глубокие и режущие басы.

Прогуливаясь по коллекции, вы окажетесь под впечатлением от мерцающих верхов и каменных низов, приправленных острыми как бритва серединой. Мне показалось странным, что очевидная способность к атмосферике и кинематографическому звуковому дизайну не была более изучена.

Высокое качество Serum

С момента своего выпуска Serum быстро стал самым популярным программным синтезатором для производства музыки. На музыкальном рынке нет другого такого синтезатора, который использовался профессионалами также широко как Serum.

И для этого есть веская причина. Комплекс Serum — это высокое качество. Так что, смело скачивайте торрент Serum VST. Простой в использовании дизайн выделяет его среди других конкурентов, как лучший wave-синтезатор. Serum является синтезатором, который многие долго ждали. Это потому, что с его интуитивно понятным интерфейсом, работать легко, а создавать нужный вам звук ещё легче!

Serum имеет огромное разнообразие высококачественных пресетов. Serum является мощным инструментом необходимым для добавления в ваш арсенал.

Достоинства Serum

Скачав торрент Serum VST вы получите гибкие осцилляторы: вы можете манипулировать сигналами с ваших генераторов частоты с легкостью. Простой в использовании, рабочий процесс прост как никогда.

• 10 уникальных звуковых эффектов
• Безграничные возможности модуляции
• Всторенный VST FX является отличным универсальным инструментом для аудио манипуляции,
  ”Drag and drop» маршрутизация и назначение параметров делает звуковое оформление невероятно легким
• Один из самых простых синтезаторов для начинающих звукорежиссеров
• Имеет несколько интересных функций, таких как преобразование текста в звук и фотографий в сигналы
• Огромное интернет-сообщество, посвященное Serum, пресеты и многое другое!
• Огромное разнообразие сложных фильтров по сравнению с синтезаторами только с базовыми опциями фильтров
• Доступные цены (от 10 $в месяц на некоторых сайтах)

Недостатки Serum

• Нет встроенного арпеджиатора
• Высокая загрузка процессора, что вызывает большую нагрузку на компьютер
• Некоторые из звуков звучат немного по «цифровому»
• VST FX немного трудно настроить в определенных ситуациях

Как вы можете видеть, преимущества владения Serum намного перевешивают недостатки синтезатора. Serum был разработан с учетом потребностей каждого пользователя!

Обзор и демонстрация Serum

1. KernelPainic
   Newbie
   

   Joined:

   Aug 15, 2019

   Messages:

   10

   Likes Received:

   1

   I’ve recently attempted to install Olymoon’s Xfer Serum & Serum FX Update 127b2 — SN + Fix- WIN from AZ, but upon installation everything works fine using a standard R2R Keygen, but serum cannot find the preset, wavetable or noise folders (they are at their default location with all their contents) my previous version of serum (1.21b3) did not have this issue. Anyone think they can help me ? I’ve tried removing everything related to serum and do a fresh install but it does not work, with or without the fix.

3. This is my biggest gripe with Duda’s plugin. All that coding & he couldn’t allow the plugin to search nested folders.

4. quadcore64
   Audiosexual
   

   Joined:

   Jun 13, 2011

   Messages:

   1,674

   Likes Received:

   916

   My Working setup is:

   Y:PluginsVSTiXfer RecordsSerum Presets
   Effect Chains
   LFO Shapes
   Noises
   Presets
   Skins
   System
   Tables

   I have one 3rd party library installed so far
   Serum PresetsPresetsAnalog Dreams — Vintage Vol. 1

   The tables for this library are in
   Serum PresetsTablesAnalog Dreams Tables

   Had to reinstall
   Install_Xfer_Serum_Update_127b2.exe & Install_Xfer_SerumFX_Update_127b2.exe
   Used serial# from Xfer_keygen instead of included patch.

   Works perfectly so far!

5. KernelPainic
   Newbie
   

   Joined:

   Aug 15, 2019

   Messages:

   10

   Likes Received:

   1

   The issue is… My setup is identical D:, I just use my C drive instead of Y…

6. quadcore64
   Audiosexual

   Joined:

   Jun 13, 2011

   Messages:

   1,674

   Likes Received:

   916

   If you used the patched dll files from the most current release, reinstall & use either the provided serial numbers from the 2 most recent releases or, use the R2R Xfer_keygen to generate a serial number.

   My problem with the patched files was an incomplete GUI.

7. r4e
   Audiosexual
   

   Joined:

   Sep 6, 2014

   Messages:

   816

   Likes Received:

   1,143

   Go to «C:Users your account name AppDataRoamingXferSerum»
   and open the Serum.cfg file with notepad or a similar txt editor.
   Scroll down to the end and it should show you the path where the presets go.

   Here it’s «C:Users your account name DocumentsXferSerum Presets»
   and the subfolders look like this:

   

   If you need any further help, write me a PM, can send you the full serum installer with presets and stuff.

   • Interesting x 1
   • List

8. KernelPainic
   Newbie
   

   Joined:

   Aug 15, 2019

   Messages:

   10

   Likes Received:

   1

   Yeah, the problem seems to be in the config file, It’s fucked up…
   
   @r4e could you be kind enough to show me your config file ? I’d like to see how it has to be structured exactly…

9. r4e
   Audiosexual
   

   Joined:

   Sep 6, 2014

   Messages:

   816

   Likes Received:

   1,143

   Ye, the last lines are:

   

   At line 40 the skin is set and at line 42 the presets path.

   So you just have to navigate to your presets path, copy the the path name and paste it
   into the empty square bracket.

   • Useful x 1
   • List

10. KernelPainic
    Newbie
    

    Joined:

    Aug 15, 2019

    Messages:

    10

    Likes Received:

    1

    This does not seem to fix it :/

11. KernelPainic
    Newbie
    

    Joined:

    Aug 15, 2019

    Messages:

    10

    Likes Received:

    1

    @r4e, do you have any other idea to what could be causing this ?

12. r4e
    Audiosexual
    

    Joined:

    Sep 6, 2014

    Messages:

    816

    Likes Received:

    1,143

    Is your presets folder located in Documents?
    You could also open Serum’s menu and select «rescan folders on disk»

    

    • Useful x 1
    • List

13. KernelPainic
    Newbie
    

    Joined:

    Aug 15, 2019

    Messages:

    10

    Likes Received:

    1

    @r4e I get this message when rescanning aswell as when I open Serum, I kept everything at default location (Documents)
    

14. r4e
    Audiosexual
    

    Joined:

    Sep 6, 2014

    Messages:

    816

    Likes Received:

    1,143

    But is there a folder named Tables inside that Serum Presets folder?

15. KernelPainic
    Newbie
    

    Joined:

    Aug 15, 2019

    Messages:

    10

    Likes Received:

    1

    Yes, there are all the files there needs to be, I’ve been using Serum for a year and this problem just happened with this release, my Serum Presets folder has everything it should :/

16. quadcore64
    Audiosexual
    

    Joined:

    Jun 13, 2011

    Messages:

    1,674

    Likes Received:

    916

    Possible solutions —
    Make certain directory as write privileges.
    Try deleting config file & reload Serum to generate a new config.
    Reinstall without using latest patched files using only serial# to activate

17. KernelPainic
    Newbie
    

    Joined:

    Aug 15, 2019

    Messages:

    10

    Likes Received:

    1

    Those are the things I read about and tried, none worked :/

    • Like x 1
    • List

18. J.M.P2001
    Newbie
    

    Joined:

    Dec 1, 2019

    Messages:

    2

    Likes Received:

    0

    move «Serum Presets» folder from «documents» to Serum installation folder

19. J.M.P2001
    Newbie
    

    Joined:

    Dec 1, 2019

    Messages:

    2

    Likes Received:

    0

    and select the folder «Serum presets» from the current location when you open vst and are prompted

Serum. Как установить пресеты?

Скачивая пресеты Serum у некоторых возникает вопрос, а как установить данные пресеты, чтобы они отображались в синтезаторе и полноценно работали в вашей DAW. Разберёмся в этом вопросе.

Serum. Как установить пресеты?

Шаг 1.

Скачивая пресеты, первое, на что вы должны обратить внимание — версия, для которой созданы данные пресеты. Иначе после установки они будут отображаться в папке Serum, но загружаться, то есть работать не будут.

Все пресеты на сайте NSS созданы для версии Serum 1.334 и выше.

Шаг 2.

Версия подходит. Отлично. Скачиваем нужный пресет.

Если вы скачиваете его с нашего сайта. То алгоритм следующий:

Шаг 3.

Теперь мы открываем папку Serum, где находятся пресеты. Путь следующий:

Мой компьютер/C/Пользователи/ имя пользователя /Мои документы/Xfer/Serum Presets/Presets

У вас откроется следующее окно:

Шаг 4.

Перезагружаем DAW. Запускаем SERUM и находим наш пресет.

В папке Presets можно создавать свое папки и рассортировать пресеты. Но желательно их называть английскими названиями, иначе они могут работать не корректно.

Всем удачи в творчестве!

Спасибо, что читаете New Style Sound ( RSS-лента ). Подписывайтесь на новости или RSS и делитесь статьями с друзьями. Что такое RSS ( читать ). Скачивайте также бесплатные плагины на сайте.

Источник

How To Install Serum Presets on Mac & Windows

Home » Blog » How To Install Serum Presets on Mac & Windows

Table of Contents

Serum is probably the most popular VST synth of our time. It sounds great, looks stunning, is easy to understand, plus there are plenty of Serum presets and skins available. Since not everyone knows how to install Serum presets I decided to write this tutorial for you guys.

Fortunately, it doesn’t matter if you’re using Mac or Windows, Ableton or FL Studio.

The process is always the same!

Open Serum’s Presets Folder

Start by opening Serum.

Now go to the menu in the top right corner and click “Show Serum Presets folder”.

You should see these folders (this screenshot is a bit old by now, so you should see some additional ones):

If you can NOT find Serum’s preset folder there’s a good chance you haven’t installed a legit license, so make sure to purchase one. It’s worth it 😉

Paste Your New Presets

Now paste the pack you’d like to install in the presets folder. Some preset banks may come with additional LFO shapes, noises, wavetables or skins. Just drag each of those categories in the matching folder, too. Wavetables go to “Tables”, noises go into “Noises” and so on.

Have fun

Go ahead and open Serum. You’ll find all patches in Serum’s browser. If you can’t open some of the presets you probably haven’t installed the latest update yet.

..and this is how to install Serum presets! Easy, right? 😉

Источник

1. How to Find Serum’s Presets Folder

The first good news: you don’t have to close your DAW. Simply navigate to Serum’s Menu in the top-right, and select Show Serum Presets Folder.

Your OS’s file browser will open up at the correct system folder containing Serum’s factory presets.

2. How to Add your New Serum Presets

All Serum presets have the file extension FXP – regardless of whether you’re on Mac or PC.

Now we can copy or move the entire new folder from our Downloads into the Serum Presets folder that we opened via Serum, in the ‘Presets’ folder, as shown here.

When we return to Serum, go back to the same menu and select Rescan folders on disk.

Our new presets now show up alongside Serum’s Factory bank.

It’s worth renaming the folder to something more relevant. You can do this using your OS file browser, and Rescan the folder in Serum once again for this to take effect. See our notes about how best to organise your Serum presets at the end of this article for more info.

3. Installing Serum Noises, Wavetables and LFOs

With your presets installed, sometimes the newly-created wavetables, noises and LFOs, made by the sound designer will be installed as part of the FXP patch, but sometimes not.

If your preset fails to produce noise when loaded, you may need to load the required wavetables into Serum as well. Serum can also bring up an error message when it can’t find a certain element, as shown below.

In this case, your downloaded preset pack should contain custom wavetables, noises and/or LFOs to drag into Serum’s other preset folders. Depending on the developer, the destination could be in the User folder for the Noise, Wavetable or other element, but the most likely way to get the sound working is to simply drag the included folder straight into the relevant directory in Serum. Don’t forget to Rescan folders on disk after this.

4. Using Imported Wavetables, LFO Shapes and Noises in your own Serum Patches

Once any Noises, ‘Tables’, and LFO Shapes are imported into Serum, you can also freely bring them into any patch you’re working on elsewhere.

5. Organising your Third-Party Serum Presets

Remember that Serum can’t access folders within folders, so if you do attempt to install your third-party packs within the User folder, you can only drag the individual FXP presets in – only one layer of folders will ever be visible, and that’s the top layer with ‘Serum Presets’

Источник

Install Serum fl studio macOS / Serum Presets folder not found

Показать панель управления

Комментарии • 40

necesito el link de descarga

Ami el serum me aparece todo negro, pero si puedo poner vst

Please enter your serum serial number
XXXX-XXXX-XXXX-XXXX-XXXX

Guys, it works.
The presets folder is in documents/Xfer
Copy the text and the other thing to the presets folder, then after choosing it you must put the key you have inside the text file.
For me it works

After putting keys it is showing this error?

thx man now it works

Please enter your serum serial number
XXXX-XXXX-XXXX-XXXX-XXXX

Hlo bhai kya aap muje serum ki vst plugin de sakthe ho please.

viejo tengo un problema es que cuando instalo serum suena pero no se ve o mejor seve el cuadro de serum pero no me muestra los botones solo un espacio en blanco

Wont let me enter serum serial on my cracked version hmmmm

when i downloaded serum on fl studio for mac, serum opens up as a black screen. could you help please

same on me. i wanna enter the serial key. but at the demo version there is no such option

podrias subir el folder para descargar, a muchos no les aparece en ningun lugar.

tbh fl studio is harder to get the vsts becuase of fl 12 so get ableton wich litterally scans your ENTORE PC/MAC for vsts and other plugins

That can be also kind of annoying because it must take alot of time to do so

hola esa carpera serum presets no la genera que podria hacer disculpa.

Bro, yo soy Mac y no me ha generado todavía el archivo Serum Presets. He hecho lo que tú dices y nada.

Me parece que en windows esa carpeta se guarda en Documentos

nada no soy mac y no me sale la carpeta he hecho de cuanta cosa y no me la genera no se que mal estoy haciendo..

Hola si la debe generar checa bien el min 1:10 si estas en mac sigue los pasos tal cual

Can you put the «serum presets folder» for download, please?

Hey, did you get it?

pls someone put link here for download i need it

Источник

Install Serum fl studio macOS / Serum Presets folder not found

ความคิดเห็น • 40

necesito el link de descarga

Ami el serum me aparece todo negro, pero si puedo poner vst

Please enter your serum serial number
XXXX-XXXX-XXXX-XXXX-XXXX

Guys, it works.
The presets folder is in documents/Xfer
Copy the text and the other thing to the presets folder, then after choosing it you must put the key you have inside the text file.
For me it works

After putting keys it is showing this error?

thx man now it works

Please enter your serum serial number
XXXX-XXXX-XXXX-XXXX-XXXX

Hlo bhai kya aap muje serum ki vst plugin de sakthe ho please.

viejo tengo un problema es que cuando instalo serum suena pero no se ve o mejor seve el cuadro de serum pero no me muestra los botones solo un espacio en blanco

Wont let me enter serum serial on my cracked version hmmmm

when i downloaded serum on fl studio for mac, serum opens up as a black screen. could you help please

same on me. i wanna enter the serial key. but at the demo version there is no such option

podrias subir el folder para descargar, a muchos no les aparece en ningun lugar.

tbh fl studio is harder to get the vsts becuase of fl 12 so get ableton wich litterally scans your ENTORE PC/MAC for vsts and other plugins

That can be also kind of annoying because it must take alot of time to do so

hola esa carpera serum presets no la genera que podria hacer disculpa.

Bro, yo soy Mac y no me ha generado todavía el archivo Serum Presets. He hecho lo que tú dices y nada.

Me parece que en windows esa carpeta se guarda en Documentos

nada no soy mac y no me sale la carpeta he hecho de cuanta cosa y no me la genera no se que mal estoy haciendo..

Hola si la debe generar checa bien el min 1:10 si estas en mac sigue los pasos tal cual

Can you put the «serum presets folder» for download, please?

Hey, did you get it?

pls someone put link here for download i need it

Источник

How To Install Serum Presets on Mac & Windows

Home » Blog » How To Install Serum Presets on Mac & Windows

Table of Contents

Serum is probably the most popular VST synth of our time. It sounds great, looks stunning, is easy to understand, plus there are plenty of Serum presets and skins available. Since not everyone knows how to install Serum presets I decided to write this tutorial for you guys.

Fortunately, it doesn’t matter if you’re using Mac or Windows, Ableton or FL Studio.

The process is always the same!

Open Serum’s Presets Folder

Start by opening Serum.

Now go to the menu in the top right corner and click “Show Serum Presets folder”.

You should see these folders (this screenshot is a bit old by now, so you should see some additional ones):

If you can NOT find Serum’s preset folder there’s a good chance you haven’t installed a legit license, so make sure to purchase one. It’s worth it 😉

Paste Your New Presets

Now paste the pack you’d like to install in the presets folder. Some preset banks may come with additional LFO shapes, noises, wavetables or skins. Just drag each of those categories in the matching folder, too. Wavetables go to “Tables”, noises go into “Noises” and so on.

Have fun

Go ahead and open Serum. You’ll find all patches in Serum’s browser. If you can’t open some of the presets you probably haven’t installed the latest update yet.

..and this is how to install Serum presets! Easy, right? 😉

How To Install Serum Presets on Mac & Windows

Home » Blog » How To Install Serum Presets on Mac & Windows

Table of Contents

Serum is probably the most popular VST synth of our time. It sounds great, looks stunning, is easy to understand, plus there are plenty of Serum presets and skins available. Since not everyone knows how to install Serum presets I decided to write this tutorial for you guys.

Fortunately, it doesn’t matter if you’re using Mac or Windows, Ableton or FL Studio.

The process is always the same!

Open Serum’s Presets Folder

Start by opening Serum.

Now go to the menu in the top right corner and click “Show Serum Presets folder”.

You should see these folders (this screenshot is a bit old by now, so you should see some additional ones):

If you can NOT find Serum’s preset folder there’s a good chance you haven’t installed a legit license, so make sure to purchase one. It’s worth it 😉

Paste Your New Presets

Now paste the pack you’d like to install in the presets folder. Some preset banks may come with additional LFO shapes, noises, wavetables or skins. Just drag each of those categories in the matching folder, too. Wavetables go to “Tables”, noises go into “Noises” and so on.

Have fun

Go ahead and open Serum. You’ll find all patches in Serum’s browser. If you can’t open some of the presets you probably haven’t installed the latest update yet.

..and this is how to install Serum presets! Easy, right? 😉

1. How to Find Serum’s Presets Folder

The first good news: you don’t have to close your DAW. Simply navigate to Serum’s Menu in the top-right, and select Show Serum Presets Folder.

Your OS’s file browser will open up at the correct system folder containing Serum’s factory presets.

2. How to Add your New Serum Presets

Here we’ve downloaded and unzipped our Melodic Techno — Serum Presets pack. Among the folders, there’s one containing ‘SERUM_PRESETS’. Folder names may vary, depending on the pack, of course.

All Serum presets have the file extension FXP – regardless of whether you’re on Mac or PC.

Now we can copy or move the entire new folder from our Downloads into the Serum Presets folder that we opened via Serum, in the ‘Presets’ folder, as shown here.

When we return to Serum, go back to the same menu and select Rescan folders on disk.

Our new presets now show up alongside Serum’s Factory bank.

It’s worth renaming the folder to something more relevant. You can do this using your OS file browser, and Rescan the folder in Serum once again for this to take effect. See our notes about how best to organise your Serum presets at the end of this article for more info.

3. Installing Serum Noises, Wavetables and LFOs

With your presets installed, sometimes the newly-created wavetables, noises and LFOs, made by the sound designer will be installed as part of the FXP patch, but sometimes not.

If your preset fails to produce noise when loaded, you may need to load the required wavetables into Serum as well. Serum can also bring up an error message when it can’t find a certain element, as shown below.

In this case, your downloaded preset pack should contain custom wavetables, noises and/or LFOs to drag into Serum’s other preset folders. Depending on the developer, the destination could be in the User folder for the Noise, Wavetable or other element, but the most likely way to get the sound working is to simply drag the included folder straight into the relevant directory in Serum. Don’t forget to Rescan folders on disk after this.

4. Using Imported Wavetables, LFO Shapes and Noises in your own Serum Patches

Once any Noises, ‘Tables’, and LFO Shapes are imported into Serum, you can also freely bring them into any patch you’re working on elsewhere.

5. Organising your Third-Party Serum Presets

You might have noticed Serum’s User folder, where it stores presets that you save yourself. We recommend not installing whole Serum preset packs here, to prevent confusion. It’s even more useful to save your presets in a folder of their own if your pack is based on a particular genre (such as a pack like Tropical House — Serum Presets, or a certain mood, like our pack Dark Cinematic — Serum Presets.

Remember that Serum can’t access folders within folders, so if you do attempt to install your third-party packs within the User folder, you can only drag the individual FXP presets in – only one layer of folders will ever be visible, and that’s the top layer with ‘Serum Presets’

Please select the folder named serum presets in the windows about to appear

The GUI is fantastic and the sound is . AMAZING ! Clarity , power , so . . . 2014

10 / 10 ( playing 2 hours with the demo so far and loving it )

Steve Duda here (the developer).
Nice to see so many good words about Serum.

If you have any questions, I’d love to answer them!

Also I wanted to mention that the plugin is 33% off until Oct 31st — Thats $129, for VST/AU/AAX on OSX/WIN 32+64 bit, and always free updates!

Hi Steve,
thanks for your offer !

Switching presets can take quite a while, is there a way, to speed this up ? Why does it take so long ?

have to get my head around the wavetables, is there something like a scale, where I can draw certain pitches ?

kindest regards,
kosi

tried to contact support 2 times (via contact form @ xfer site) with no luck (((
any one have direct mail of them or even Steve?

I just found your messages this morning spam filtered, maybe it was the links you included. In any case I’ve replied to your message here.

Hi kosi — the delay is almost entirely the wavetables loading, which involve a lot of pre-calculations for maximum sound quality on realtime playback. Just like loading a patch in Kontakt, a very similar thing is happening here (imagine keyzones being created across the keyboard, with 256 samples in each zone — it turns out to be minutes not seconds of audio, and this audio is not simply ‘loading’ but rather processing / high-quality filtering). With that said, I will be working to improve this speed, in the near future, while I am confident I can make significant optimizations, however there will always be some delay.

the ‘pitch’ is the note you play on the keyboard of course. Then the harmonics of that pitch can be drawn in the bars across the very top of the WT editor window. Similarly you can get pitches out by using certain grid sizes, e.g. a grid size of 6 will give you a ‘perfect 5th’ kind of sound!

Steve yesterday i bought your monster vsti !

I was messing with the delay effect and i have to say its very very good .

One word «WOW» I just saw the demo from PLUGINGURU.com

Impressive indeed. IMpressive price as well. I will have this. I only own 1 softsynth, this is the one to add.

Made with Serum
I sampled my Virus XL and used the Saw waveform for the Arp here. The intro sound and the pluck sound in the complete track is also Serum (there is also Dune, Spire etc. so it’s not 100% Serum)

Why not do it just to be safe.

Gotta say, I’m really enjoying this synth.

Its got tons a capabilities and I really like how you can get very experimental.

First Song («Concentrated» presets):

This is one instance of Serum with a custom patch.

Now here is another with one guitar part added:

The cool thing is that this can be done with one synth and saved as a patch which allows for some really powerful live use.

In the past I would have to use several synths to get the same results.

click where it says «- Init -» in blue at the top, there is a menu directory of presets there («internal browser»). They aren’t exposed to the host.

click where it says «- Init -» in blue at the top, there is a menu directory of presets there («internal browser»). They aren’t exposed to the host.

yeah I had this as well

they are in ‘documents’ ->’Xfer’ -> ‘Serum Presets’

Working on a film soundtrack in Logic and changing presets in Serum caused a couple of crashes.
Anyone else experiencing this?

I really like Serum. I think it has great potential and can see it developing into a dream synth. I feel it has slightly more oomph than Zebra — I’m finding it easier to get harder more abrasive sounds — and more fidelity than Massive — it sounds glassier — offering a little something different whilst complementing them. What I like most is the aggressive, hard character that this synth has.

The slow preset loading times are a bit of a drag though.

KVR Audio

Pro Audio Forum — VST, AU, AAX Plugin and Audio Software Discussion

Serum — Why cant i change the preset folder location :(?

Post by Caine123 » Tue Apr 04, 2017 7:47 pm

Post by m03 » Tue Apr 04, 2017 9:18 pm

Maybe they’re trying to avoid having to burn support hours/funds troubleshooting end-user filesystem permissions issues.

Anyway, maybe try adding a symlink to the desired destination?

6399 posts since 5 Aug, 2009

Post by Caine123 » Tue Apr 04, 2017 9:20 pm

Post by EvilDragon » Tue Apr 04, 2017 9:20 pm

6399 posts since 5 Aug, 2009

Post by Caine123 » Tue Apr 04, 2017 9:23 pm

Post by yellowmix » Tue Apr 04, 2017 9:47 pm

I do this to all my plugins, and some don’t like symlinks, and some won’t even work with junction points. I considered patching the dlls but maintenance would be a pain. But Serum is one of the most cooperative and easy preset relocation plugins.

Simply move the preset folder wherever you’d like (if you don’t know where it is, open up the menu in Serum and choose «Show Serum Presets folder». After that, create a new Serum instance, it’s going to say it can’t find the presets, and ask you to please tell it where it is. Point it to the new location, and you’re done.

6399 posts since 5 Aug, 2009

Post by Caine123 » Tue Apr 04, 2017 10:11 pm

Serum demo: preset folder path issue

MurrayMurray

I am still having an issue opening the presets when it asks to open the presets. I tried moving the presets folder to my desktop and that didn’t work. Any suggestions?
thanks!

steve_xfer

You could try C: but you shouldn’t have to put it anywhere, try re-installing the demo.

StraightArrow-splice

When you write «once my payments begin» do you mean once they register? Because I made clear my payments have begun, otherwise I wouldn’t be upset that I couldn’t use the program or access the support forum. The directions given by Splice were followed precisely and they didn’t work. I didn’t want my hand held, I wanted self evident documentation, like other programs are supplied with. I didn’t want to have to keep writing you back. Nobody wants to feel like a bother. That picked my ass. Self evident documentation would be best. Working out flaws instead of working around them is preferential.
I have seen you reply to others that this is not a «support» forum perse, but I was not acknowledged on the xfer site for several days after my purchase and therefore I had no access to the forum you say is the proper one to use. I can only suppose that the splice crew doesn’t work on the weekends, and registration is not digitally automated. Furthermore implying that you don’t really appreciate the forum being used this way comes off to me as rude. Are questions of this nature really not appreciated here? They either are or aren’t, please make up your mind.
You are telling people they need to buy the full version to fix the problem, but that didn’t fix it for me, so you shouldn’t say it. I want people to know what real world installation requires. This seems the best place to do that. Installation through 7-Zip made it work, will you tell us why?
I hope for two things by posting here, that you will identify the specific nature of problems experienced by users and design permanent solutions, rather than dealing with it on a customer to customer basis, which is sloppy patchwork. It works only if the customer spends time bouncing emails which is time consuming and irritating. Secondly, I want anyone who is considering purchasing to know that the remedy to the problem is not as simple as merely purchasing.
Incidentally, where is the help forum for Demo users (aka potential customers), is there one?
Though your program is very impressive, and the payment plan very considerate, there is a clear user unfriendliness problem regarding the installation process. I bought the program intending to learn it over the weekend, Splice didn’t reply until Monday, so I wasn’t registered as a paying customer until then, and you weren’t exactly greasing the wheels. You must understand that would piss a guy off. A protracted or laborious customer relations experience is unappreciated, so much so in fact at one point you yourself were ready to give up on me, a paid customer!
Our unwitting beta testing should lead to improved program performance. It is for the provider to fix problems and for customers to enjoy the products. When customers start feeling like employees something is wrong. Being your own boss means the buck stops with you.
I wish you could see why I don’t like your responses, but if you don’t want to you won’t.

steve_xfer

MurrayMurray

Thank you! That question was with the demo. But now I have the real Serum. Looking forward to it.

Источник

Please select the folder named serum presets in the windows about to appear

10 / 10 ( playing 2 hours with the demo so far and loving it )

Steve Duda here (the developer).
Nice to see so many good words about Serum.

If you have any questions, I’d love to answer them!

kindest regards,
kosi

tried to contact support 2 times (via contact form @ xfer site) with no luck (((
any one have direct mail of them or even Steve?

I just found your messages this morning spam filtered, maybe it was the links you included. In any case I’ve replied to your message here.

the ‘pitch’ is the note you play on the keyboard of course. Then the harmonics of that pitch can be drawn in the bars across the very top of the WT editor window. Similarly you can get pitches out by using certain grid sizes, e.g. a grid size of 6 will give you a ‘perfect 5th’ kind of sound!

One word «WOW» I just saw the demo from PLUGINGURU.com

Impressive indeed. IMpressive price as well. I will have this. I only own 1 softsynth, this is the one to add.

Made with Serum
I sampled my Virus XL and used the Saw waveform for the Arp here. The intro sound and the pluck sound in the complete track is also Serum (there is also Dune, Spire etc. so it’s not 100% Serum)

Why not do it just to be safe.

Gotta say, I’m really enjoying this synth.

Its got tons a capabilities and I really like how you can get very experimental.

First Song («Concentrated» presets):

This is one instance of Serum with a custom patch.

Now here is another with one guitar part added:

The cool thing is that this can be done with one synth and saved as a patch which allows for some really powerful live use.

In the past I would have to use several synths to get the same results.

yeah I had this as well

Working on a film soundtrack in Logic and changing presets in Serum caused a couple of crashes.
Anyone else experiencing this?

The slow preset loading times are a bit of a drag though.

Источник

Видео