Scsi detect ошибка a6 - Решение и исправление самых разных ошибок на TopOshibok.ru

Содержание

Detect and install all currently connected scsi devices что это значит
Detect and install all currently connected scsi devices что это значит
New PC Build won’t post and A6 Error code
josh01
Dec 17, 2018 18:58:07 GMT -8

Detect and install all currently connected scsi devices что это значит

14 Reserved.
15 Pre-memory North-Bridge initialization is started.
Показать полностью.
16

18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A

2F Memory initialization.
31 Memory installed.
32

36 CPU PEI initialization.
37

3A IOH PEI initialization.
3B

3E PCH PEI initialization.
3F

4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63

67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B

6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73

77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A

7F Reserved for AMI use.
80

8F Reserved for OEM use (OEM DXE
initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.Regular Boot
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect(ex.Monitor is lighted).
98 Console input devices connect(ex.PS2/USB keyboard/mouse are activated).
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all currently connected USB devices.
9E

9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B(4,5) USB(PCI) device hot plug-in.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8

CF Reserved.
E0 S3 Resume is stared(called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.S3 Resume
F0 Recovery mode will be triggered due to invaild firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F(3,4)Recovery firmware image is found(loaded)
F5

F7 Reserved for future AMI progress codes.
50

55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C

5F Reserved.
D(0,1,2)-(CPU,IOH,PCH) initialization error.
D3 Some of the Architectural Protocols are not
available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D(6,7) No Console Output(input) Devices are found.
D8 It is an invaild password.
D9

DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE

DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC

EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB

Источник

Detect and install all currently connected scsi devices что это значит

В данном материале представлены все известные POST-коды на Китайских материнских платах LGA 2011 и LGA 2011-3. Если вы например столкнулись с проблемой запуска системы то по номеру кода можно узнать в чём причина неполадки, что значительно облегчает выявление неисправности. Если ваша плата оснащена пост картой — это огромный плюс, вы всегда будите в курсе, система работает исправно или нет.

Если после запуска системы всё в порядке, POST-код должен быть АА, если он другой, то стоит посмотреть на расшифровку кодов ниже и выявить причину.

10 PEI Core is started.
11 Pre-memory CPU initialization is started.
12

14 Reserved.
15 Pre-memory North-Bridge initialization is started.
16

18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A

2F Memory initialization.
31 Memory installed.
32

36 CPU PEI initialization.
37

3A IOH PEI initialization.
3B

3E PCH PEI initialization.
3F

4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63

67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B

6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73

77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A

7F Reserved for AMI use.
80

F7 Reserved for future AMI progress codes.
50

DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE

DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC

EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB

Официальная расшифровка пост-кодов от American Megatrends в .pdf формате:
— Для LGA 2011-3 подойдёт Aptio 5.x Status Codes
— Для LGA 2011 подойдёт Aptio 4.x Status Codes

Источник

New PC Build won’t post and A6 Error code

josh01

Reputable

Desperate for some help please!

I’ve just completed a brand new build using the Gigabyte Z97X Gaming G1 (motherboard.

I’m continually seeing the code A6 on the debug digital meter.
A6 Detect and install all currently connected SCSI devices.

To troubleshoot, I uninstalled the SSD I was going to use as my main Windows Boot Drive and the CD/DVD Writer. I also uninstalled the MSI R9 390 GPU card. Still I get the error code A6. What’s causing this problem?

I then uninstalled the 2 sticks of Corsair Vengeance RAM, 16Gb (2×8)Gb) DDR3/1066, trying one stick only in each slot and then two sticks and swapping around again, still the error code of A6.

Is this A6 code the main cause of me not being able to boot from the SSD when everything is installed and connected?

I’m not hearing any POST beeps but maybe that’s because I don’t have a speaker wire in the case that goes to the relevant header. Is there a speaker on the motherboard?

All parts for this build are brand new, all purchased within the last couple of weeks.

Mother board Gigabyte Z97X Gaming G1.
Graphics GPU MSI R9 390.
Power Supply is an Enermax Platimax 1500Watt.
CPU Intel I5 4690K.
RAM Corsair Vengeance 16Gb (2x8Gb) DDR3 1066
Crucial MX200 SSD.

Источник

Dec 17, 2018 18:58:07 GMT -8

bigdave
Moderator
Right now I’m Offline
I have made 3,404 posts
I joined March 2017
I’ve received 170 likes My gender is Male I currently have no messenger contact information filled out. I currently have no social network information filled out.

14 Reserved.
15 Pre-memory North-Bridge initializations is started.
16

18 Reserved.
19 Pre-memory South-Bridge initializations is started.
1A

2F Memory initialization.
31 Memory installed.
32

36 CPU PEI initialization.
37

3A IOH PEI initialization.
3B

3E PCH PEI initialization.
3F

4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63

67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B

6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73

77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A

7F Reserved for AMI use.
80

8F Reserved for OEM use (OEM DXE initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.
Regular Boot
Code Description
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect (ex. Monitor is lighted).
98 Console input devices connect (ex. PS2/USB keyboard/mouse are activated)
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all currently connected USB devices.
9E

9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B4 USB device hot plug-in.
B5 PCI device hot plug.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8

CF Reserved.
E0 S3 Resume is started (called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.
S3 Resume
Code Description
F0 Recovery mode will be triggered due to invalid firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F3 Recovery firmware image is found.
F4 Recovery firmware image is loaded.
F5

F7 Reserved for future AMI progress codes.
Recovery
Code Description
50

5F Reserved.
D0 CPU initialization error.
D1 IOH initialization error.
Error
Code Description
D2 PCH initialization error.
D3 Some of the Architectural Protocols are not available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D6 No Console Output Devices are found.
D7 No Console Input Devices are found.
D8 It is an invalid password.
D9

DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE

DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invalid.
EB S3 OS Wake call is failed.
EC

EF Reserved.
F8 Recovery PPI is invalid.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB

Источник

Hi,

I just started my new build with a MSI X570 Unify Motherboard but when i’m in bios i see an error code A6.
I did not installed windows yet, but i updated my bios to the latest firmware.

I need help to fix this error code.
Thanks!

What is ez debug leds indication?
What drives do you have connected?
And other hardware >>Posting Guide<<

Remove all drives, etc….
Just use a barebones setup and try booting.
MB+ RAM + CPU + GPU, and see if it boots.

Board: MSI X570 Unify
BIOS: E7C35AMS.A20
VGA: Sapphire 5700XT Nitro+
PSU: Corsair RX850X
CPU: AMD 3800X
MEM: 2x8GB, 4500MHz Corsair Vengeance LPX CMK16GX4M2F4500C19
HDD/SSD: 1x XPG SX8200 Pro 500GB, 1x XPG SX8200 Pro 2TO, 2x Samsung Evo 860 500GB
COOLER: Dark Rock Pro 4
Keyboard: Logitech G512
Mouse: Logitech G403
OC: None
OS: Not installed yet (Windows 10 64bit Professional)

In Bios, all 4 driver are detected correctly.
But in the photo is the code can be Ab or is it A6?

A6 — SCSI Detect
AB — Setup Input Wait

I think i will go further and try to install windows and see if the code still there while not in bios.

Do yourself a favor and cover those leds with electrical tape, there is no need for them unless does not work.

Chike said:

Do yourself a favor and cover those leds with electrical tape, there is no need for them unless does not work.

well, it will show cpu temp after startup.

Maculosa date=1578933605 said:

A6 — SCSI Detect
AB — Setup Input Wait

I think i will go further and try to install windows and see if the code still there while not in bios.

On AMD boards, these arent always error codes. In fact, most of them are not. All this one is saying is that something has been detected.

Svet

Well-known member

A6 generally is shown when the computer is in BIOS Setup
and its not really error indicator,
but a code where the PC is located on the moment.

Do you see anything on the screen?
If so, just ignore it and proceed with what you planning to do.

Svet date=1579031500 said:

A6 generally is shown when the computer is in BIOS Setup
and its not really error indicator,
but a code where the PC is located on the moment.

Do you see anything on the screen?
If so, just ignore it and proceed with what you planning to do.

Yes i see this while i’m in bios, (Windows not installed yet)
I see the screen bios with no problem, if fact everything look normal.
So i will just proceed to windows installation.

Thanks

Svet

Well-known member

yep, then this is like suppose to be and not some error.
they are checkpoints codes,
they can become an error only if the computer stuck or can’t boot.
[typically A6 is the checkpoint code when the computer is inside BIOS Setup]

Источник

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.

Desperate for some help please!

I’ve just completed a brand new build using the Gigabyte Z97X Gaming G1 (motherboard.

I’m continually seeing the code A6 on the debug digital meter.
A6 Detect and install all currently connected SCSI devices.

I then uninstalled the 2 sticks of Corsair Vengeance RAM, 16Gb (2×8)Gb) DDR3/1066, trying one stick only in each slot and then two sticks and swapping around again, still the error code of A6.

Is this A6 code the main cause of me not being able to boot from the SSD when everything is installed and connected?

I’m not hearing any POST beeps but maybe that’s because I don’t have a speaker wire in the case that goes to the relevant header. Is there a speaker on the motherboard?

All parts for this build are brand new, all purchased within the last couple of weeks.

Mother board Gigabyte Z97X Gaming G1.
Graphics GPU MSI R9 390.
Power Supply is an Enermax Platimax 1500Watt.
CPU Intel I5 4690K.
RAM Corsair Vengeance 16Gb (2x8Gb) DDR3 1066
Crucial MX200 SSD.

: Nov 1, 2012

: 39,825

: 249

: 126,990

Using tv, or monitor? What cable?

Viewsonic monitor using HDMI. Motherboard only has DVI, HDMI and a Display Port. I’m only using the onboard graphics using HDMI at the moment because connecting the HDMI into the back of the GPU doesn’t seem to work at the moment.

According to my research, it looks like just plugging the HDMI into the GPU should allow your pc to boot.
I also found this:
«Wow… I just had an «are you serious?!» moment.

I had a sinking suspicion that the A6 code was really Ab (AB), which means the BIOS is waiting for my input. The real issue was my freaking monitor not displaying the BIOS screen properly. I’m using an old HP CRT through the VGA. I found that if you have the monitor plugged into the Mobo BEFORE powering on, the monitor displays a blank blue screen. I had to actually turn the Mobo on first, let it POST, and THEN plug the VGA cable in. The monitor then displayed the BIOS instead of just blue emptiness. So everything seems good now. Man, I was really worried too…»
Good luck.

: Feb 19, 2013

: 11,726

: 332

: 76,490

Intel I5 4690K uses Memory Types DDR3-1333/1600, not DDR3 1066.

Similar threads

Advertising
Cookies Policies
Privacy
Term & Conditions

Источник

r/pcmasterrace

Welcome to the official subreddit of the PC Master Race / PCMR!

All PC-related content is welcome, including build help, tech support, and any doubt one might have about PC ownership.

You don’t necessarily need a PC to be a member of the PCMR. You just have to love PCs. It’s not about the hardware in your rig, but the software in your heart!

Join us in celebrating and promoting tech, knowledge, and the best gaming, study, and work platform there exists. The Personal Computer.

Members

Online

Источник

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

I just bought a asrock z68 extreme3 gen3 motherboard from newegg. When I try to start the computer, everything seems to work fine except the code A6 appears. I can’t even get it to post.

Does anybody have any idea what that means? This is my first gaming pc build and I could really use the help.

Specs:
i5 2500k
asrock z68 extreme3 gen3
msi twin frozer II 6870
8GB Ripjaws X Series
XFX 750w psu

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

I just bought a asrock z68 extreme3 gen3 motherboard from newegg. When I try to start the computer, everything seems to work fine except the code A6 appears. I can’t even get it to post.

Does anybody have any idea what that means? This is my first gaming pc build and I could really use the help.

Specs:
i5 2500k
asrock z68 extreme3 gen3
msi twin frozer II 6870
8GB Ripjaws X Series
XFX 750w psu

***Also I want to mention that I do not have a HD or SSD hooked up because I am just trying to do a test run to see if everything works.

nikorr

: Oct 22, 2009

: 23,346

: 0

: 54,960

: 825

Well, why don’t u install Windows first, it may never come back.

: Oct 2, 2009

: 6,164

: 9

: 26,960

: 549

A6 stands for SCSI Detect.
A0-A3 are IDE.
A4-A7 are SCSI.
What you can do in the BIOS is to disable SCSI detection some where in the Storage section…. if that is available or possible.

: Dec 18, 2011

: 118

: 0

: 18,710

: 7

Agree with nikorr; I also have a new build with an asrock z68 and experienced the same debug code. After installing Win7, it went away.

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

But when I did the external build nothing came on the monitor. It didn’t post or anything, but it didn’t have the cd drive or hd or ssd hooked on to it. But if I hook those up to the motherboard and just install Win 7 it should work again?

I’ll take everybody’s advice and try to install Win 7. Thanks!

: Oct 2, 2009

: 6,164

: 9

: 26,960

: 549

Yes, it will work, A6 is not en Error code, it is telling you what the mother board is doing at that instance of time.
In your case, it is detecting SCSI devices connected to the mobo at that time.

: Oct 26, 2012

: 71

: 0

: 10,630

: 0

After I install Windows, and get my new monitor, and hook it up to my new video card, will it automatically detect the new video card…?

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

I just bought a asrock z68 extreme3 gen3 motherboard from newegg. When I try to start the computer, everything seems to work fine except the code A6 appears. I can’t even get it to post.

Does anybody have any idea what that means? This is my first gaming pc build and I could really use the help.

Specs:
i5 2500k
asrock z68 extreme3 gen3
msi twin frozer II 6870
8GB Ripjaws X Series
XFX 750w psu

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

I just bought a asrock z68 extreme3 gen3 motherboard from newegg. When I try to start the computer, everything seems to work fine except the code A6 appears. I can’t even get it to post.

Does anybody have any idea what that means? This is my first gaming pc build and I could really use the help.

Specs:
i5 2500k
asrock z68 extreme3 gen3
msi twin frozer II 6870
8GB Ripjaws X Series
XFX 750w psu

***Also I want to mention that I do not have a HD or SSD hooked up because I am just trying to do a test run to see if everything works.

nikorr

: Oct 22, 2009

: 23,346

: 0

: 54,960

: 825

Well, why don’t u install Windows first, it may never come back.

: Oct 2, 2009

: 6,164

: 9

: 26,960

: 549

A6 stands for SCSI Detect.
A0-A3 are IDE.
A4-A7 are SCSI.
What you can do in the BIOS is to disable SCSI detection some where in the Storage section…. if that is available or possible.

: Dec 18, 2011

: 118

: 0

: 18,710

: 7

Agree with nikorr; I also have a new build with an asrock z68 and experienced the same debug code. After installing Win7, it went away.

: Jul 26, 2011

: 20

: 0

: 18,510

: 0

I’ll take everybody’s advice and try to install Win 7. Thanks!

: Oct 2, 2009

: 6,164

: 9

: 26,960

: 549

Yes, it will work, A6 is not en Error code, it is telling you what the mother board is doing at that instance of time.
In your case, it is detecting SCSI devices connected to the mobo at that time.

: Oct 26, 2012

: 71

: 0

: 10,630

: 0

After I install Windows, and get my new monitor, and hook it up to my new video card, will it automatically detect the new video card…?

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

Desperate for some help please!

I’ve just completed a brand new build using the Gigabyte Z97X Gaming G1 (motherboard.

I’m continually seeing the code A6 on the debug digital meter.
A6 Detect and install all currently connected SCSI devices.

I then uninstalled the 2 sticks of Corsair Vengeance RAM, 16Gb (2×8)Gb) DDR3/1066, trying one stick only in each slot and then two sticks and swapping around again, still the error code of A6.

Is this A6 code the main cause of me not being able to boot from the SSD when everything is installed and connected?

I’m not hearing any POST beeps but maybe that’s because I don’t have a speaker wire in the case that goes to the relevant header. Is there a speaker on the motherboard?

All parts for this build are brand new, all purchased within the last couple of weeks.

Mother board Gigabyte Z97X Gaming G1.
Graphics GPU MSI R9 390.
Power Supply is an Enermax Platimax 1500Watt.
CPU Intel I5 4690K.
RAM Corsair Vengeance 16Gb (2x8Gb) DDR3 1066
Crucial MX200 SSD.

alexoiu

: Nov 1, 2012

: 39,825

: 247

: 126,990

: 5,837

Using tv, or monitor? What cable?

: Feb 2, 2014

: 75

: 1

: 10,660

: 9

According to my research, it looks like just plugging the HDMI into the GPU should allow your pc to boot.
I also found this:
«Wow… I just had an «are you serious?!» moment.

: Feb 19, 2013

: 11,727

: 332

: 76,490

: 3,371

Intel I5 4690K uses Memory Types DDR3-1333/1600, not DDR3 1066.

: Feb 2, 2014

: 75

: 1

: 10,660

: 9

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

[SOLVED] «Progress Code A6 (SCSI Detect)» prevents me from accessing BIOS ?

Thread starter

cecchfab
Start date

Feb 15, 2022

Hello Nice Folks 😉

I Have the following problem that i tried to solve for a few days now.

First of all my specs:

MoBo: MSI MEG X570S ACE MAX (MS-7D50)
CPU: AMD Ryzen 9 5950X
GPU: ASUS RTX 3090 EKWB
RAM: 4x 8GB DDR4-3603 / PC4-28800 DDR4 SDRAM UDIMM
OS: Windows 10 Version 21H2 (19044, 1566)

After a windows clean install i cant acess my Bios anymore. I can normally boot in to windows and everything works fine but when i smash the «del» key to enter bios during startup the MoBo shows «Progress Code A6 (SCSI Detect)» and nothing happens anymore (Black screen). When i restart by shutting down my PC everything works fine.
During Startup the MoBo Shows the Progress Code 64 (CPU DXE Initialization (CPU Module specific) or the Progress Code 9C (USB Detect) but it lets me boot to Windows and again everything works fine.

I really have no clue how to solve this, here is a list of things i tried without being successful:

clear CMOS
Update all drivers (Chipset, GPU, Audio, Ethernet, …)
Uninstall and Reinstall USB-Devices (now i dont get the 9C Progress Code anymore)
check if everything is plugged in well and correctly on my MoBo
unplugged and changed Keyboard / Mouse
Access BIOS from Windows UEFI Firmware Settings (Windows advanced Startup)
System Restore

As i said, before the W10 clean Install everything worked fine (BIOS and OS) but after the clean install i cant access the BIOS anymore but Windows works just fine.
Would love some help because i cant set my custom Fan curve and im running hot over here .

Thank you very much for all the Answers 😄

Cheers
Cecchfab

: Dec 24, 2011

: 8,017

: 1,007

: 53,590

: 1,533

try clearing CMOS through jumper (clear cmos pins)
if that doesnt help, download latest bios from mainboard download page, even if you have same version, it wont matter
extract bios image from zip file and place it on USB stick, you should be able to enter bios flash mode with ctrl+F5 key even without entering bios (when PC powers up), reflash bios with freshly downloaded bios image

: Dec 24, 2011

: 8,017

: 1,007

: 53,590

: 1,533

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

[SOLVED] «Progress Code A6 (SCSI Detect)» prevents me from accessing BIOS ?

Thread starter

cecchfab
Start date

Feb 15, 2022

Hello Nice Folks 😉

I Have the following problem that i tried to solve for a few days now.

First of all my specs:

MoBo: MSI MEG X570S ACE MAX (MS-7D50)
CPU: AMD Ryzen 9 5950X
GPU: ASUS RTX 3090 EKWB
RAM: 4x 8GB DDR4-3603 / PC4-28800 DDR4 SDRAM UDIMM
OS: Windows 10 Version 21H2 (19044, 1566)

I really have no clue how to solve this, here is a list of things i tried without being successful:

clear CMOS
Update all drivers (Chipset, GPU, Audio, Ethernet, …)
Uninstall and Reinstall USB-Devices (now i dont get the 9C Progress Code anymore)
check if everything is plugged in well and correctly on my MoBo
unplugged and changed Keyboard / Mouse
Access BIOS from Windows UEFI Firmware Settings (Windows advanced Startup)
System Restore

Thank you very much for all the Answers 😄

Cheers
Cecchfab

: Dec 24, 2011

: 8,017

: 1,007

: 53,590

: 1,533

: Dec 24, 2011

: 8,017

: 1,007

: 53,590

: 1,533

Advertising
Cookies Policies
Privacy
Term & Conditions
Topics

: Категория: Инструкции; Опубликовано: 26 июня 2020

Для быстрого поиска нажмите Ctrl+F и введите искомый код.

10 PEI Core is started.
11 Pre-memory CPU initialization is started.
12~14 Reserved.
15 Pre-memory North-Bridge initialization is started.
16~18 Reserved.
19 Pre-memory South-Bridge initialization is started.
1A~2A Reserved.
2B~2F Memory initialization.
31 Memory installed.
32~36 CPU PEI initialization.
37~3A IOH PEI initialization.
3B~3E PCH PEI initialization.
3F~4F Reserved.
60 DXE Core is started.
61 NVRAM initialization.
62 Installation of the PCH runtime services.
63~67 CPU DXE initialization is started.
68 PCI host bridge initialization is started.
69 IOH DXE initialization.
6A IOH SMM initialization.
6B~6F Reserved.
70 PCH DXE initialization.
71 PCH SMM initialization.
72 PCH devices initialization.
73~77 PCH DXE initialization (PCH module specific).
78 ACPI Core initialization.
79 CSM initialization is started.
7A~7F Reserved for AMI use.
80~8F Reserved for OEM use (OEM DXE
initialization codes).
90 Phase transfer to BDS (Boot Device Selection) from DXE.
91 Issue event to connect drivers.Regular Boot
92 PCI Bus initialization is started.
93 PCI Bus hot plug initialization.
94 PCI Bus enumeration for detecting how many resources are requested.
95 Check PCI device requested resources.
96 Assign PCI device resources.
97 Console Output devices connect(ex.Monitor is lighted).
98 Console input devices connect(ex.PS2/USB keyboard/mouse are activated).
99 Super IO initialization.
9A USB initialization is started.
9B Issue reset during USB initialization process.
9C Detect and install all currently connected USB devices.
9D Activated all currently connected USB devices.
9E~9F Reserved.
A0 IDE initialization is started.
A1 Issue reset during IDE initialization process.
A2 Detect and install all currently connected IDE devices.
A3 Activated all currently connected IDE devices.
A4 SCSI initialization is started.
A5 Issue reset during SCSI initialization process.
A6 Detect and install all currently connected SCSI devices.
A7 Activated all currently connected SCSI devices.
A8 Verify password if needed.
A9 BIOS Setup is started.
AA Reserved.
AB Wait user command in BIOS Setup.
AC Reserved.
AD Issue Ready To Boot event for OS Boot.
AE Boot to Legacy OS.
AF Exit Boot Services.
B0 Runtime AP installation begins.
B1 Runtime AP installation ends.
B2 Legacy Option ROM initialization.
B3 System reset if needed.
B(4,5) USB(PCI) device hot plug-in.
B6 Clean-up of NVRAM.
B7 Reconfigure NVRAM settings.
B8~BF Reserved.
C0~CF Reserved.
E0 S3 Resume is stared(called from DXE IPL).
E1 Fill boot script data for S3 resume.
E2 Initializes VGA for S3 resume.
E3 OS S3 wake vector call.S3 Resume
F0 Recovery mode will be triggered due to invaild firmware volume detection.
F1 Recovery mode will be triggered by user decision.
F2 Recovery is started.
F(3,4)Recovery firmware image is found(loaded)
F5~F7 Reserved for future AMI progress codes.
50~55 Memory initialization error occurs.
56 Invalid CPU type or speed.
57 CPU mismatch.
58 CPU self test failed or possible CPU cache error.
59 CPU micro-code is not found or micro-code update is failed.
5A Internal CPU error.
5B Reset PPI is failed.
5C~5F Reserved.
D(0,1,2)-(CPU,IOH,PCH) initialization error.
D3 Some of the Architectural Protocols are not
available.
D4 PCI resource allocation error. Out of Resources.
D5 No Space for Legacy Option ROM initialization.
D(6,7) No Console Output(input) Devices are found.
D8 It is an invaild password.
D9~DA Can’t load Boot Option.
DB Flash update is failed.
DC Reset protocol is failed.
DE~DF Reserved.
E8 S3 resume is failed.
E9 S3 Resume PPI is not found.
EA S3 Resume Boot Script is invaild.
EB S3 OS Wake call is failed.
EC~EF Reserved.
F8 Recovery PPI is invaild.
F9 Recovery capsule is not found.
FA Invalid recovery capsule.
FB~FF Reserved.

Дополнительная информация:

Источник