Rom image is not loaded ошибка

Аватар пользователя

Всем привет. Прошу помочь.

Конфигурация ПК следующая:

1. Мать GIGABYTE B550M AORUS PRO-P

2. Процессор Ryzen 5600G

3. Оперативка Patriot Viper Steel 2х8Гб

4. Windows 10 pro.

ПК проработал нормально пару дней. Работал на профиле XMP. Потом, при запуске выбросило в биос с ошибками ROM Image is not loaded, ROM Image update denied.

Во вкладке Save&Exit, выбираю диск с ОС и загрузка идет, но при следующем включении снова выбрасывает в биос с ошибкой.

При запуске, спикер издает 2 коротких/пауза/4 коротких.

В Биосе, выставляя XMP профиль, после перезагрузки, частота оперативки остается на стоке.

В Windows, в диспетчере устройств, на встроенной графике, показывает ошибку 43.

Что делал:

1. Обновил биос до последней версии (F15d). Изначально стоял F13.

2. Вынимал батарейку. Делал сброс CMOS.

3. Переустанавливал Операционку на чистый SSD.

4. Проверял оперативную память Mentest86. Полный тест. Ошибок ноль.

5. Менял плашки памяти на другие.

Проблема в процессоре возможна?

Обсуждение товара

What brand of motherboard is this? Gigabyte (Z390 Gaming X)

«PAGE FAUL IN NONPAGED AREA»
«SYSTEM THREAD EXCEPTION NOT HANDLED»
«DRIVER IRQL NOT LESS OR EGUAL» storahci.sys
«IRQL NOT LESS OR EQUAL»
«KMODE EXCEPTION NOT HANDLED»

«PAGE FAUL IN NONPAGED AREA»
«SYSTEM THREAD EXCEPTION NOT HANDLED»
«DRIVER IRQL NOT LESS OR EGUAL» storahci.sys
«IRQL NOT LESS OR EQUAL»
«KMODE EXCEPTION NOT HANDLED»
Those are normally Driver or RAM related
Storahci is HDD/SSD related
So faulty hardware could be likely

To test RAM, did you try using 1 stick individually in normal usage or did you simply use a Memory diagnostic?

Do you have a different SSD/HDD you can install the OS on to test?
As far as that goes, do you have multiple drives installed?

Those are normally Driver or RAM related
Storahci is HDD/SSD related
So faulty hardware could be likely

To test RAM, did you try using 1 stick individually in normal usage or did you simply use a Memory diagnostic?

Do you have a different SSD/HDD you can install the OS on to test?
As far as that goes, do you have multiple drives installed? Yes i checked the RAM, all worked fine.
No i dont have different SSD or HDD for testing.
No i dont have multiple drives installed.

I’ll just send the whole pc to mindfactory so they can check the whole system, hardware and software. Hopefully they can fix the problem, or they maybe just give me a new system because of the 6 months garanty i have.
I will post updates here if you guys are interested.

Question Bios Issue: ROM Image is not loaded, ROM Image update denied

after supposedly fixing an issue with my gpu, i rebooted my pc only for to be taken to my bios where i got the messages seen in the title. i try to just ignore it and go ‘save and exit setup’, but upon clicking ‘yes’, the computer freezes indefinetely. i tried resetting my OC, but that didn’t work. tried going ‘exit without saving’ just to come back to the bios upon reboot with the same message. help?

ryzen 2700
aorus b450 pro
32gb 3200mhz ripjaws
windforce 1080ti

I just started getting this error and it just started. The desktop have been running fine for several years until this happened. I am running this board bios F22m, intel process I56500 with 32 gig of memory. When I try to restart the system it goes through the boot process then right to the BIOS screen with a message of Rom image is not loaded ROM image update denied. When you save and exit you see the gigabyte logo screen then automatic repair. You then have a blue background screen with Select account at the top left. You select the account and then enter the password. It goes back to the logo screen with a message of Diagnosing system/automatic repair. The screen says Your PC did not start correctly. Press restart to restart your PC which can sometimes fix the problem. You can also press Advanced options to repair your PC. I have gone to a DOS prompt to see if my boot drive has failed. I can access this drive and all others with the command line. So I believe that my drives are not the issue. Boot drive is Crucial SSD. When you select restart it goes back to the boot screen and tries to load. After a second it fails and the message is inaccessible boot device. So what is the fix, new processor, new motherboard, a new drive or something that I can fix once I know what it is wrong. Any ideas will be greatly appreciated. I have searched the web and found this problem but no solution. Thanks

User: Richard Dillon

Richard5058 This person is a Verified Professional

Rom image is not loaded/image update denied

Recently, I was trying to open Secure Boot on my Gigabyte B450M S2H. But i couldn’t and my BIOS bricked.

And after that, i sent it for service. Today i received my mobo.. Now everything is works fine except an issue.

When i hit the power button buzzer is beeping. (2 long pause 4 long) After, opening bios screen. BIOS shows me 2 error :

Rom image is not loaded. Rom image update denied.

If i go to the «Save and Exit» tab from BIOS and select «Windows Boot Manager(Samsung 980 500GB)» Windows works properly without any issue.

I can’t update my BIOS version btw because i have another issue too. When i try to update my BIOS version it shows «Invalid BIOS Image»

Rom image is not loaded что делать

Обсуждение PiPO X8
Изображение| ИзображениеTV Box на процессоре Intel Z3736F

Китайская компания Pipo продолжает выпускать необычные устройства. Ранее в этом году производитель уже представил 10,1-дюймовый планшет на базе процессора Intel Core M-5Y10C и миниатюрный компьютер Pipo X7S, на которых пользователи могут переключаться между Android 4.4 KitKat и полноценной версией Windows 8.1. Теперь Pipo анонсирует уникальный мини-ПК X8, который оснащён встроенным 7-дюймовым сенсорным дисплеем с разрешением 1280х800 пикселей. Удобство использования такого решения вызывает вопросы, но идея создать подобное самодостаточное устройство весьма интересная.

Презентация на английском | Ссылка на 4 PDA
Root-права в Android можно получить через VRoot

I just started getting this error and it just started. The desktop have been running fine for several years until this happened. I am running this board bios F22m, intel process I56500 with 32 gig of memory. When I try to restart the system it goes through the boot process then right to the BIOS screen with a message of Rom image is not loaded ROM image update denied. When you save and exit you see the gigabyte logo screen then automatic repair. You then have a blue background screen with Select account at the top left. You select the account and then enter the password. It goes back to the logo screen with a message of Diagnosing system/automatic repair. The screen says Your PC did not start correctly. Press restart to restart your PC which can sometimes fix the problem. You can also press Advanced options to repair your PC. I have gone to a DOS prompt to see if my boot drive has failed. I can access this drive and all others with the command line. So I believe that my drives are not the issue. Boot drive is Crucial SSD. When you select restart it goes back to the boot screen and tries to load. After a second it fails and the message is inaccessible boot device. So what is the fix, new processor, new motherboard, a new drive or something that I can fix once I know what it is wrong. Any ideas will be greatly appreciated. I have searched the web and found this problem but no solution. Thanks

Gigabyte MX31-BS0 – ROM Image is Not Loaded | ROM Image Update Denied Error


Posted on Updated on

Recently, I mothballed my 3 x Gev IV servers in replacement of my new home lab.  Being they were just lying around, I wanted to find a use for them.  I decided to use one as a Sophos UTM firewall.  The motherboard is the Gigabyte MX31-BS0 and it should work quite well for that purpose.  However, after powering up the server it beeped with 2 Beeps followed by 4 Beeps, then the server would boot to BIOS and go to the Recovery Page displaying this message – ‘ROM Image is Not Loaded. ROM Image Update Denied Error.’

Looking up the beep codes this indicated a ‘Recovery Started’ and ‘S3 Resume failure’

Things I tried –

  • Reset BIOS back to default settings
  • Ensured all BIOS settings were correct and enabled (per various blog posts)

These things didn’t resolve the issue. I started to think about flashing the BIOS but didn’t, and then it hit me what if there was a jumper miss-match? Its not likely, being I’ve had this system working for quite a while.

The Very Simple Solution –  For some reason jumper #4 was missing, I simply replaced the jumper and the system booted normally.   I can only guess it came loose at some point and fell off.  I could also see how someone installing the RAM could have bumped it loose.

Wrap up – I know this solution seems hardly deep enough content for a blog post, but when I was searching for suggestions I never found one suggesting to check your jumpers.

If you like my ‘no-nonsense’ videos and blogs that get straight to the point… then post a comment or let me know… Else, I’ll start posting really boring content!

This entry was posted in vmware.

[SOLVED] B550 AORUS PRO V2 (1.0) BIOS Rom image is not loaded ?


  • Thread starter

    geddk


  • Start date


  • Home

  • Forums

  • Hardware

  • Motherboards

You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.



Jul 15, 2021


1


0


10


  • #1

2 beeps and 4 beeps. That happen twice. Then normal beep, POST into Bios and says «Rom image is not loaded«
I can’t flash from Bios or Q-flash without hardware installed. Tried other Ram and GPU.
Is it broken or anybody have same issue?

Share this page


  • Home

  • Forums

  • Hardware

  • Motherboards

Понравилась статья? Поделить с друзьями:
  • Rockstar games launcher ошибка при загрузке игры
  • Rockstar games launcher ошибка при загрузке гта 5
  • Rockstar games launcher ошибка обновления gta 5
  • Rockstar games launcher ошибка код 134 epic games
  • Rockstar games launcher ошибка загрузки