Rms ошибка 1202

DFS Replication failed to contact Domain Controller…..

I have seen this error since the inception of this stand alone AD PDC instance of Windows server 2012 R2 Essentials. I understand that Essentials does not support other Domain Controllers ; Member servers ; or trust between Domains of any kind. I also
understand that DSF Replication is a service that replicates files between other servers and other domain servers that Essentials dose not want to talk to.
So my question is why am I seeing this DFSR error 1202  in my event log, if Essentials does not support communication to other servers and domain servers? Maybe a better question is why does Essentials even try to implement this
service? Do I even need to try to resolve this issue or should I just disable it and move on? 
Contents of Error:
Log Name:      DFS Replication
Source:        DFSR
Date:          2/6/2014 1:57:57 PM
Event ID:      1202
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Hxxx2.xxxxxxxxxxxxx.local
Description:
The DFS Replication service failed to contact domain controller  to access configuration information. Replication is stopped. The service will try again during the next configuration polling cycle, which will occur in 60 minutes. This event can be caused
by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Event Xml:
<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>
  <System>
    <Provider Name=»DFSR» />
    <EventID Qualifiers=»49152″>1202</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime=»2014-02-06T19:57:57.000000000Z» />
    <EventRecordID>194</EventRecordID>
    <Channel>DFS Replication</Channel>
    <Computer>Hxxx2.Hxxxxxxxxxxxxx.local</Computer>
    <Security />
  </System>
  <EventData>
    <Data>
    </Data>
    <Data>60</Data>
    <Data>160</Data>
    <Data>One or more arguments are not correct.</Data>
  </EventData>
</Event>

Hi, 
Did you mean that you did not configure a DFS server in the new DC but you get the DFSR error 1202 in your event log? Then the issue is not related to the existing SBS domain. 
Please try to turn off the Windows Firewall to check if it causes the issue. You could also refer to the articles below to troubleshoot the issue:
Newly Promoted Win2K8 DC is not advertising as Domain Controller.
http://blogs.technet.com/b/niraj_kumar/archive/2009/04/23/newly-promoted-win2k8-dc-is-not-advertising-as-domain-controller.aspx
Restrictions for Unauthenticated RPC Clients: The group policy that punches your domain in the face
https://blogs.technet.com/b/askds/archive/2011/04/08/restrictions-for-unauthenticated-rpc-clients-the-group-policy-that-punches-your-domain-in-the-face.aspx
Regards, 
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DFSR failed to contact domain controller

Im having an odd problem with DFSR group we created to replicate web content between two of our web servers.
In event viewer we have this event 1202 for DFSR.
«The DFS Replication service failed to contact domain controller  to access configuration information. Replication is stopped. The service will try again during the next configuration polling cycle, which will occur in 60 minutes. This event can
be caused by TCP/IP connectivity, firewall, Active Directory Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)»
In the DFSR logs I see this.
20140303 12:18:27.874 1404 CFAD 8300 Config::AdConfig::GetLocalComputerNameWithDns Computer’s fully-qualified DNS name: DFSRSERVER.domain.tld
20140303 12:18:27.920 1404 CFAD 311 Config::AdConnection::Connect Binding to dcAddr:\1.1.1.1 dcDnsName:\MYDC.domain.tld
20140303 12:18:27.936 1404 CFAD 143 Config::AdConnection::BindToAd Trying to connect. hostName:MYDC.domain.tld
20140303 12:18:28.467 1404 CFAD 162 Config::AdConnection::BindToAd Bound. hostName:MYDC.domain.tld
20140303 12:18:28.467 1404 CFAD 199 Config::AdConnection::BindToDc Try to bind. hostName:\MYDC.domain.tld domainName:<null>
20140303 12:18:28.514 1404 CFAD 3373 [ERROR] Config::DsSession::Bind Failed to DsBind(). dc:\MYDC.domain.tld domainName:<null> Error:5
20140303 12:18:28.514 1404 CFAD 215 Config::AdConnection::BindToDc (Ignored) Failed to bind. hostName:\MYDC.domain.tld domainName:<null> Error:[Error:5(0x5) Config::DsSession::Bind ad.cpp:3380 1404 W Access is denied.]
20140303 12:18:28.514 1404 CFAD 199 Config::AdConnection::BindToDc Try to bind. hostName:\1.1.1.1 domainName:<null>
20140303 12:18:28.514 1404 CFAD 3373 [ERROR] Config::DsSession::Bind Failed to DsBind(). dc:\1.1.1.1 domainName:<null> Error:87
20140303 12:18:28.514 1404 CFAD 215 Config::AdConnection::BindToDc (Ignored) Failed to bind. hostName:\1.1.1.1 domainName:<null> Error:[Error:87(0x57) Config::DsSession::Bind ad.cpp:3380 1404 W The parameter is incorrect.]
20140303 12:18:28.514 1404 SCFS 150 [WARN] ServiceConfig::DsPollIsDue Failed to enable lightweight polling. Error:
+ [Error:160(0xa0) Config::AdConfig::ConnectToLocalDc ad.cpp:8365 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConfig::Connect ad.cpp:8113 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConnection::Connect adconnection.cpp:377 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConnection::BindToDc adconnection.cpp:226 1404 W One or more arguments are not correct.]
20140303 12:18:28.514 1404 CREG 1419 Config::RegReader::IsSysVolCommitFlagSet key: SystemCurrentControlSetServicesDFSRParametersSysVolsDemoting SysVols valueName:’SysVol Information is Committed’ result:0
20140303 12:18:28.514 1404 W2CH 266 ConfigurationHelper::PollAdConfigNow Trying to connect to AD
20140303 12:18:28.514 1404 CFAD 311 Config::AdConnection::Connect Binding to dcAddr:\1.1.1.1 dcDnsName:\MYDC.domain.tld
20140303 12:18:28.514 1404 CFAD 143 Config::AdConnection::BindToAd Trying to connect. hostName:MYDC.domain.tld
20140303 12:18:28.514 1404 CFAD 162 Config::AdConnection::BindToAd Bound. hostName:MYDC.domain.tld
20140303 12:18:28.514 1404 CFAD 199 Config::AdConnection::BindToDc Try to bind. hostName:\MYDC.domain.tld domainName:<null>
20140303 12:18:28.514 1404 CFAD 3373 [ERROR] Config::DsSession::Bind Failed to DsBind(). dc:\MYDC.domain.tld domainName:<null> Error:5
20140303 12:18:28.514 1404 CFAD 215 Config::AdConnection::BindToDc (Ignored) Failed to bind. hostName:\MYDC.domain.tld domainName:<null> Error:[Error:5(0x5) Config::DsSession::Bind ad.cpp:3380 1404 W Access is denied.]
20140303 12:18:28.514 1404 CFAD 199 Config::AdConnection::BindToDc Try to bind. hostName:\1.1.1.1 domainName:<null>
20140303 12:18:28.514 1404 CFAD 3373 [ERROR] Config::DsSession::Bind Failed to DsBind(). dc:\1.1.1.1 domainName:<null> Error:87
20140303 12:18:28.514 1404 CFAD 215 Config::AdConnection::BindToDc (Ignored) Failed to bind. hostName:\1.1.1.1 domainName:<null> Error:[Error:87(0x57) Config::DsSession::Bind ad.cpp:3380 1404 W The parameter is incorrect.]
20140303 12:18:28.514 1404 EVNT 1194 EventLog::Report Logging eventId:1202 parameterCount:4
20140303 12:18:28.514 1404 EVNT 1214 EventLog::Report eventId:1202 parameter1:
20140303 12:18:28.514 1404 EVNT 1214 EventLog::Report eventId:1202 parameter2:60
20140303 12:18:28.514 1404 EVNT 1214 EventLog::Report eventId:1202 parameter3:160
20140303 12:18:28.514 1404 EVNT 1214 EventLog::Report eventId:1202 parameter4:One or more arguments are not correct.
20140303 12:18:28.530 1404 W2CH 318 [ERROR] ConfigurationHelper::PollAdConfigNow (Ignored) Failed to connect to AD. Error:
+ [Error:160(0xa0) Config::AdConfig::ConnectToLocalDc ad.cpp:8365 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConfig::Connect ad.cpp:8113 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConnection::Connect adconnection.cpp:377 1404 W One or more arguments are not correct.]
+ [Error:160(0xa0) Config::AdConnection::BindToDc adconnection.cpp:226 1404 W One or more arguments are not correct.]
When I run «dfsrdiag pollad»:
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
However I can run «dfsrdiag dumpadcfg» and it outputs everything fine.
We don’t have any other problems with AD.  It seems like this started after we installed KB2467173 & KB2538242.  We are going to uninstall those and see if it works.

I can successfully run «dfsrdiag.exe dumpadcfg» and it outputs the entire config.  Why does «dfsrdiag pollad» fail then if the config can be read.
Why did it work before I rebooted the server?  In both cases it broke after rebooting.
PS C:Windowssystem32> dfsrdiag dumpadcfg
LDAP Bind : mydc.domain.tld
SitesDn : cn=sites,cn=configuration,dc=domain,dc=tld
ServicesDn : cn=services,cn=configuration,dc=domain,dc=tld
SystemDn : cn=system,dc=domain,dc=tld
DefaultNcDn : dc=domain,dc=tld
ComputersDn : cn=computers,dc=domain,dc=tld
DomainCtlDn : ou=domain controllers,dc=domain,dc=tld
SchemaDn : CN=Schema,CN=Configuration,dc=domain,dc=tld
COMPUTER: web1
DN : cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : 152E849C-4D7B-4AE8-B034-83747DBC1E89
DNS : web1.domain.tld
Server Ref : (null)
USN Changed : 10862129
When Created : Friday, January 31, 2014 8:41:06 PM
When Changed : Tuesday, March 4, 2014 2:54:36 PM
LOCAL SETTINGS: DFSR-LOCALSETTINGS
DN : cn=dfsr-localsettings,cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : 3FD696E7-6598-4CDB-B2AB-98F148C0D2F7
Version : 1.0.0.0
USN Changed : 10932017
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:15:25 PM
SUBSCRIBER: FF88A312-A0EB-44CC-A614-7A3D06DCC0AB
DN : cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=dfsr-localsettings,cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : 1119B663-F02A-4F1F-A904-23A87CFC93C3
Member Ref : cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
USN Changed : 10931931
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
SUBSCRIPTION: 6783DDE1-C795-4E8B-B07D-4EA8D7D0317F
DN : cn=6783dde1-c795-4e8b-b07d-4ea8d7d0317f,cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=dfsr-localsettings,cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : 3737B1F2-7E38-47E2-90E7-E57D82B145F1
ContentSetGuid: 6783DDE1-C795-4E8B-B07D-4EA8D7D0317F
Root Path : c:inetpubinternetsites
Root Size : 10240 (MB)
Staging Path : c:inetpubinternetsitesdfsrprivatestaging
Staging Size : 4096 (MB)
Conflict Path : c:inetpubinternetsitesdfsrprivateconflictanddeleted
Conflict Size : 4096 (MB)
USN Changed : 10931919
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
SUBSCRIPTION: F2F1F3A2-B36F-4170-B371-8E8043DF73F4
DN : cn=f2f1f3a2-b36f-4170-b371-8e8043df73f4,cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=dfsr-localsettings,cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : 57E7F8D7-1121-4334-BC81-74226ADF8969
ContentSetGuid: F2F1F3A2-B36F-4170-B371-8E8043DF73F4
Root Path : c:internet_data
Root Size : 10240 (MB)
Staging Path : c:internet_datadfsrprivatestaging
Staging Size : 4096 (MB)
Conflict Path : c:internet_datadfsrprivateconflictanddeleted
Conflict Size : 4096 (MB)
USN Changed : 10931921
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
SUBSCRIPTION: D0438B52-B706-4E40-B4C3-FE7A1ACA5FCF
DN : cn=d0438b52-b706-4e40-b4c3-fe7a1aca5fcf,cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=dfsr-localsettings,cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
GUID : F8217091-F71A-4D4A-A676-097583171A63
ContentSetGuid: D0438B52-B706-4E40-B4C3-FE7A1ACA5FCF
Root Path : c:phpphpsites
Root Size : 10240 (MB)
Staging Path : c:phpphpsitesdfsrprivatestaging
Staging Size : 4096 (MB)
Conflict Path : c:phpphpsitesdfsrprivateconflictanddeleted
Conflict Size : 4096 (MB)
USN Changed : 10931923
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
GLOBAL SETTINGS: DFSR-GLOBALSETTINGS
DN : cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 2E98CE5E-5CC7-4322-B5EA-2B6B340C689F
USN Changed : 12525
When Created : Saturday, October 22, 2011 1:56:38 AM
When Changed : Saturday, October 22, 2011 1:56:38 AM
REPLICATION GROUP: WEB CONTENT
DN : cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 9C94A417-6F6C-4F6C-BBFA-B8F52854C4DF
Type : 0 (UNKNOWN REPLICATION GROUP TYPE)
Options : 0x1 [Local Time Schedule]
USN Changed : 10931906
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CONTENT: CONTENT
DN : cn=content,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 6714C533-E631-4E71-930D-E4934FB7BD7E
USN Changed : 10931908
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CONTENT SET: INTERNET_DATA
DN : cn=internet_data,cn=content,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : F2F1F3A2-B36F-4170-B371-8E8043DF73F4
File Filter : ~*, *.bak, *.tmp
Compression Excl : (null)
Dir Filter : (null)
USN Changed : 10931916
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CONTENT SET: INTERNETSITES
DN : cn=internetsites,cn=content,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 6783DDE1-C795-4E8B-B07D-4EA8D7D0317F
File Filter : ~*, *.bak, *.tmp
Compression Excl : (null)
Dir Filter : (null)
USN Changed : 10931915
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CONTENT SET: PHPSITES
DN : cn=phpsites,cn=content,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : D0438B52-B706-4E40-B4C3-FE7A1ACA5FCF
File Filter : ~*, *.bak, *.tmp
Compression Excl : (null)
Dir Filter : (null)
USN Changed : 10931917
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
TOPOLOGY: TOPOLOGY
DN : cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 16053002-7B99-4DA7-BFE5-2A6418040640
USN Changed : 10931907
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
MEMBER: FF88A312-A0EB-44CC-A614-7A3D06DCC0AB
DN : cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 75A99277-C401-409F-A32D-6D8EE18E5D0C
Server Ref : (null)
Computer Ref : cn=web1,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
Keywords : (null)
Computer DNS : web1.domain.tld
USN Changed : 10931933
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CXTION: 9ECE3EB7-FE97-4A1B-8DE3-47A77B2C625B
DN : cn=9ece3eb7-fe97-4a1b-8de3-47a77b2c625b,cn=ff88a312-a0eb-44cc-a614-7a3d06dcc0ab,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 1D26B348-3875-4BD1-9473-E72506AFA222
Inbound : true
Partner DN : cn=46f913db-8509-4581-a66d-d37e4ea3ef29,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
Enabled : TRUE
Options : 0x1 [Local Time Schedule]
USN Changed : 10931924
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
CXTION: 2BFA8BE2-0444-4AAF-8293-A5486CF8D7A3
DN : cn=2bfa8be2-0444-4aaf-8293-a5486cf8d7a3,cn=46f913db-8509-4581-a66d-d37e4ea3ef29,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : A7203451-D95F-44D5-AC04-13056DCE5A89
Inbound : false
Partner DN : cn=46f913db-8509-4581-a66d-d37e4ea3ef29,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
Enabled : TRUE
Options : 0x1 [Local Time Schedule]
USN Changed : 10931925
When Created : Thursday, March 6, 2014 2:11:13 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
MEMBER: 46F913DB-8509-4581-A66D-D37E4EA3EF29
DN : cn=46f913db-8509-4581-a66d-d37e4ea3ef29,cn=topology,cn=web content,cn=dfsr-globalsettings,cn=system,dc=domain,dc=tld
GUID : 1BA26D07-45F5-44A0-8450-9274AFD99B1C
Server Ref : (null)
Computer Ref : cn=fccu01web,ou=web,ou=virtual servers,ou=servers,dc=domain,dc=tld
Keywords : (null)
Computer DNS : fccu01web.domain.tld
USN Changed : 10931927
When Created : Thursday, March 6, 2014 2:11:12 PM
When Changed : Thursday, March 6, 2014 2:11:27 PM
Operation Succeeded

Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

I’m replicating between two servers in two sites (Server A — Server 2012 R2 STD, Server B — Server 2008 R2) over a VPN (Sonicwall Firewall).  Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB).  I’m seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then….
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <—I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours 
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
———————————more troubleshooting—————————
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
  TCP    10.x.x.x:53            0.0.0.0:0             
LISTENING       1692
[DFSRs.exe]
  TCP    10.x.x.x:54669        
10.x.x.x:5722          TIME_WAIT       0
  TCP    10.x.x.x:54673        
10.x.x.x:5722          ESTABLISHED     1656
 [DFSRs.exe]
  TCP    10.x.x.x:64773        
10.x.x.x:389           ESTABLISHED     1692
[DFSRs.exe]
  TCP    10.x.x.x:64787        
10.x.x.x:389           ESTABLISHED     1656
 [DFSRs.exe]
  TCP    10.x.x.x:64795        
10.x.x.x:389           ESTABLISHED     2104
Receiving Member:
[DFSRs.exe]
  TCP    10.x.x.x:56683        
10.x.x.x:389           ESTABLISHED     7472
 [DFSRs.exe]
  TCP    10.x.x.x:57625        
10.x.x.x:54886         ESTABLISHED     2808
[DFSRs.exe]
  TCP    10.x.x.x:61759        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61760        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61763        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61764        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61770        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61771        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61774        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61775        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61776        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61777        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61778        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61779        
10.x.x.x:57625         TIME_WAIT       0
  TCP    10.x.x.x:61784        
10.x.x.x:52757         ESTABLISHED     7472
[DFSRs.exe]
  TCP    10.x.x.x:63661        
10.x.x.x:63781         ESTABLISHED     4880
——————————more troubleshooting—————————
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the «Authenticated Users» is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
— I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I’m seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
—————————————more troubleshooting——————————
I’ve done a lot of research on the Internet and most of it is pointing to the same stuff I’ve tried.  Does anyone have any other suggestions?  Maybe I need to look somewhere
else on the server side or firewall side? 
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it’s not a server issue. 
Some other things I’m wondering:
-Could it be the speed of the NICs?  Server A is a 2012 Server that has Hyper-V installed.  NIC teaming was initially setup and since Hyper-V is installed the NIC is a «vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout’s cause the issue?  From time to time I get a timeout but it’s not as often as the events I’m seeing.  I’m getting 53ms pings.  The folder
is only 3 GB so it shouldn’t take that long to replicate but it’s been days.  The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am.  Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps.  Server A is on a 5mb circuit and Server B is on a 10mb circuit. 

I’m seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don’t know for sure but I’m running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, «This RPC connection problem may be caused by an unstable WAN connection.» I don’t believe this is the case for my system.
It also says…
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are «DFSRs.exe», which the command won’t let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3=»Can not», «Can not obtain ownership information», IF(LEFT(A3,1) = «[«, A3&B3&C3, «»))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I’m looking for a needle in a haystack.
I’ll see if I can find anything useful out, but a better solution would be most wonderful.

The DFS Replication service stopped replication on the folder with the following local path: C:WindowsSYSVOLdomain

Hi,
i am facing the problem SVSVOL folder replication, i also checked dcdiag and result is DFSRevent fail .
in event log i found the event Error:
The DFS Replication service stopped replication on the folder with the following local path: C:WindowsSYSVOLdomain. This server has been disconnected from other partners for 173 days, which is longer than the time allowed by the MaxOfflineTimeInDays parameter
(61). DFS Replication considers the data in this folder to be stale, and this server will not replicate the folder until this error is corrected.
To resume replication of this folder, use the DFS Management snap-in to remove this server from the replication group, and then add it back to the group. This causes the server to perform an initial synchronization task, which replaces the stale data with fresh
data from other members of the replication group.
Additional Information:
Error: 9061 (The replicated folder has been offline for too long.)
Replicated Folder Name: SYSVOL Share
Replicated Folder ID: 427F62C0-0316-4DEA-B7FA-06A7D6C06A4F
Replication Group Name: Domain System Volume
Replication Group ID: CBED9B54-58D5-4081-ABD0-0C9D4EBA6027
Member ID: 67C302ED-F82A-4FC1-9A2C-62DBCC6BCA2A
please suggest me the solution..

> disconnected from other partners for 173 days, which is longer than the
> please suggest me the solution..
Increase the MaxOfflineTimeInDays. Try google or bing
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me — coke bottle design refreshment :))

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this…
«Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk.»
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it’s trying to repair the Hard Drive.)
If perchance you can’t find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered.

How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered or they show 1. 1. 1. 1. 1. 1. 1.

Poor metadata needs to be corrected if the album is to display properly in iTunes. iTunes sees an «album» as any collection of tracks with the same Album title and the same Album Artist (or Artist if Album Artist isn’t set). Each track of the album should have distinct Track V of W and Disc X of Y vaules. W,X,Y are optional, but X may be needed for multi disc albums.
See Gropuing tracks into albums for details.
tt2

My hard drive fried and had to be replaced. I’m trying to install CS4 from my original discs but keep getting this error message — «One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly». A customer s

My hard drive fried and had to be replaced. I’m trying to install CS4 from my original discs but keep getting this error message — «One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly». A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message — «A problem occurred extracting the archive».
Can anyone help?

Yep.  Nothing happens at all. Windows tries to execute the uninstaller, but I don’t get any other screen and all activity stops for the MSI.  I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn’t find anything or something.
It’s as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the «Size» column.  Now it’s just blank.  Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date.  That’s when I was able to successfully reinstall it.  Now I can’t even do that.  I should also mention I tried Revo Uninstaller.  It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it?  It refused to run unless I had one in it, so I used my install dvd.

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It’s these songs that won’t transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark=’https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937′
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: «One or more components of the HP printing software are corrupted or missing…» Reinstalled software but Mac will not cause printer to print.  My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution » if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up» on the right to say “Thanks» for helping!
Jamieson
I work on behalf of HP
«Remember, I’m pulling for you, we’re all in this together!» — Red Green.

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>     Windows Explorer by clicking on the name which is visible on the
>     Start Menu.
You cannot block explorer.exe when you do not replace the shell — the
desktop you see effectively IS explorer.exe…
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me — coke bottle design refreshment :))

ECC IM report, the available and assigned budgets are not correct

Hi All
Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
But individual investment order level, they are correct..
The report we are running is : S_ALR_870122806 .
Any help higly appreciated and points are assigned .
Cheers
ravindra .

Hi,
Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
Regards,
Shankar K B

When I try to delete page(s) from a PDF document I created, I geth the following message: «One or more pages are in use and could not be deleted.» Any suggestions?

When I try to delete page(s) from a PDF document I created, I geth the following message: «One or more pages are in use and could not be deleted.» Any suggestions?

I sent an email to TerraGo Support and they sent the following response: «This has bug has been discovered and our development team is quickly creating a patch to resolve the problem. The patch should be available within a week or two. For your reference, the bug number assigned to this case is: 3620. Check back in about two weeks and hopefully the patch will be available. Again, I apologize for the inconvenience.»

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears — ignore the red slider — let go of the buttons.
Make sure that you do not have a stalled download in iTunes — a song or podcast …. if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn’t work — sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons — tap and hold down on an icon until it wiggles — the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And … You can always install the updates in iTunes on your computer and then sync them to the iPad.

HELP!!!  Message — (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?)  How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor.  Everytime I open iTunes and then close out, the following message occurs: (i-tunes message — One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button.  How do I get this to stop?  Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also.  I started uninstalling unneeded Sony applications to try to narrow down the problem.  It turned out not to be a Sony application… it is some functionality built into the bluetooth driver software package by Broadcom.  Uninstalling the bluetooth package (via the control panel) takes care of the problem.  Itunes also boots up way quicker.  But uninstalling it will remove features related to bluetooth and nfc.   For me, that isn’t an issue, since I don’t use them.  Since you said you’re «computer challenged» I would probably just send an email to sony complaining about the problem.  They’ll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge…  nearly 1GB in size.  Which is crazy.  I can’t imagine what it does considering the size of it.  Entire operating systems can take up less storage.  Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.