-
Registry Error? INPA
When I start
I get this error:
*****************************************
Registry Value failed in SubKey :
‘HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Serial’May be there are problems!
*****************************************
How do I fix this?
-
YOu need to goto Ediabas/hardware/obdsetup And run the program. That will get the registry set but if it still shows warnings or missing variables, you need to actually goto into the registry and change or add some variables to it…
To go into registry you goto the start menu and under search programs type REGEDIT….Then goto ‘HKEY_LOCAL_MACHINE/CurrentControlSet/Services/Serial’
There you will find all the values from the OBDsetup. Make changes to it accordingly to make all the values say «OK»
Last edited by cn555ic; 05-13-2012 at 12:54 PM.
-
Originally Posted by cn555ic
YOu need to goto Ediabas/hardware/obdsetup And run the program. That will get the registry set but if it still shows warnings or missing variables, you need to actually goto into the registry and change or add some variables to it…
To go into registry you goto the start menu and under search programs type REGEDIT….Then goto ‘HKEY_LOCAL_MACHINE/CurrentControlSet/Services/Serial’
There you will find all the values from the OBDsetup. Make changes to it accordingly to make all the values say «OK»
I was able to change the Value Start to 1 but there are still several items that «failed». How do I fix that?
************************************************** **
Windows 2000 Version 6.0 Build 6002
Installing OBD driver…
SubKey ‘SYSTEM\CurrentControlSet\Services\Serial’ allready exist !
Reading values of the key …
Value Type = 1 Expected = 1 Ok
Value Start = 1 Expected = 1 Ok
Value Group = Extended base Expected = Extended base Ok
Value ErrorControl = 0 Expected = 0 Ok
Read value ‘Tag’ failed !
Read value ‘ForceFifoEnable’ failed !
Read value ‘RxFIFO’ failed !
Read value ‘TxFIFO’ failed !
Read value ‘PermitShare’ failed !
Read value ‘LogFifo’ failed !All done.
Press any key to continue …
************************************************** **
-
Don’t worry about the script content unless it prevents the program from running.
-
Originally Posted by JetBlackE46
I was able to change the Value Start to 1 but there are still several items that «failed». How do I fix that?
************************************************** **
Windows 2000 Version 6.0 Build 6002
Installing OBD driver…
SubKey ‘SYSTEM\CurrentControlSet\Services\Serial’ allready exist !
Reading values of the key …
Value Type = 1 Expected = 1 Ok
Value Start = 1 Expected = 1 Ok
Value Group = Extended base Expected = Extended base Ok
Value ErrorControl = 0 Expected = 0 Ok
Read value ‘Tag’ failed !
Read value ‘ForceFifoEnable’ failed !
Read value ‘RxFIFO’ failed !
Read value ‘TxFIFO’ failed !
Read value ‘PermitShare’ failed !
Read value ‘LogFifo’ failed !All done.
Press any key to continue …
************************************************** **
If those are your values there will be no connection and it would definitely not work…Here is a picture of the correct values…Go into the registry like I posted earlier and make the correct changes to them..Once you get to the serial registry you need to look at the values I posted on the pic and make the changes to it…If you have to add a value use the top right and press edit and make changes.
Last edited by cn555ic; 05-13-2012 at 07:38 PM.
-
Originally Posted by cn555ic
If those are your values there will be no connection and it would definitely not work…Here is a picture of the correct values…Go into the registry like I posted earlier and make the correct changes to them..Once you get to the serial registry you need to look at the values I posted on the pic and make the changes to it…If you have to add a value use the top right and press edit and make changes.
It worked, thanks!
-
-
Thank you this was very helpful.
-
Recently I had gotten the same error message in INPA, but had no problems checking for errors on my car. I looked in the registry and could not find
‘HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Serial’I just checked and realized that I had left EDIABAS 6.4.7 in the C: drive after using DIS, then forgot to switch EDIABAS to 7.3.0 for my INPA(version 5.0.6). I just switched over to EDIABAS 7.3.0 and upon opening INPA(version 5.0.6), the error did not appear.
Just my 2 cents.
-
-
INPA Installation Error
Originally Posted by JetBlackE46
I was able to change the Value Start to 1 but there are still several items that «failed». How do I fix that?
************************************************** **
Windows 2000 Version 6.0 Build 6002
Installing OBD driver…
SubKey ‘SYSTEM\CurrentControlSet\Services\Serial’ allready exist !
Reading values of the key …
Value Type = 1 Expected = 1 Ok
Value Start = 1 Expected = 1 Ok
Value Group = Extended base Expected = Extended base Ok
Value ErrorControl = 0 Expected = 0 Ok
Read value ‘Tag’ failed !
Read value ‘ForceFifoEnable’ failed !
Read value ‘RxFIFO’ failed !
Read value ‘TxFIFO’ failed !
Read value ‘PermitShare’ failed !
Read value ‘LogFifo’ failed !All done.
Press any key to continue …
************************************************** **
I’m getting the same error. I’m running windows 10 on my computer. Can anyone help me with the installation? I will really appreciate the help. I bought the CD online and I don’t know if INPA 5.01 is compatible with windows 10. Thanks for your help.
-
-
Originally Posted by x5xDrive35i
I bought the CD online and I don’t know if INPA 5.01 is compatible with windows 10. Thanks for your help.
Hi,
You pay for INPA?? Whaaat… somebody f**ck you up. And to reply for your question, for sure INPA 5.06F will run smootly on Win10.
Remove all those shit what you have, clean registry, download whole package from here, install and enjoy:
https://mega.nz/#F!zw5V0IrD!08GgdgH0AtxZcWh62_76xAIn case you can always pm me, or I can help you via Team Viewer.
Last edited by wjgud123; 11-18-2019 at 07:02 AM.
-
Originally Posted by wjgud123
Hi,
You pay for INPA?? Whaaat… somebody f**ck you up. And to reply for your question, for sure INPA 5.06F will run smootly on Win10.
Remove all those shit what you have, clean registry, download whole package from here, install and enjoy:
https://mega.nz/#F!zw5V0IrD!08GgdgH0AtxZcWh62_76xAIn case you can always pm me, or I can help you via Team Viewer.
My virusscanner wasn’t happy with some «Dr gini.exe» file inside this archive. Also never heard of anything Gini inside a BMW Tool setup.
-
I have to ask, but does the reg entry of «Serial» (HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Serial) interfere with any ADS setup?
Or is this strictly for the «USB Serial Port» devices?
I have an USB OBD setup on COM3 (and set as such in OBD.ini) and an ADS setup on COM1/IRQ4/03F8.
Changing anything in any of the port settings (send/receive buffers) does not seem to change the reg settings. Kind of confusing what interface links to what reg entry.
-
i have the same problem but i can not go to HKEY_LOCAL_MACHINE/CurrentControlSet
Originally Posted by cn555ic
Возврат к Части 1
Возврат к Части 3
И так, продолжаем…
7.11. Возвращаемся к Диспетчеру устройств.
7.12. Запуститься окно:
7.13. Запуститься окно:
7.14. Запуститься окно:
7.15. Возвращаемся к Диспетчеру устройств.
7.16. Запуститься окно:
7.17. Запуститься окно:
7.18. Возвращаемся к окну:
7.19. А теперь возвращаемся к папке INPA. Внутри папки есть командный файл — Prepare. Кликаем по нему правой кнопкой мыши и выбираем запуск от имени администратора.
7.20. Командный файл выполниться и вы увидите окно:
7.21. Поскольку при выполнении бывают возникают ошибки, поэтому давайте 2 обязательных файла скопируем вручную:
—7.21.1. Заходим в разархивированную папку INPA, Далее переходим в папку INPA 5.0. Затем в папку Extras. Копируем файл — obd. И вставляем его в папку: C:\Windows\
—7.21.2. Заходим в разархивированную папку INPA, Далее переходим в папку INPA 5.0. Затем в папку Extras. Копируем файл — EDIABAS. И вставляем его в папку: C:\EDIABAS\Bin\
7.22. Установка завершена, осталось совсем немного!
Переходим к Части 5.
Если Вам помогла данная инструкция, то не забываем нажать на соответствующую кнопульку. Если что-то непонятно, оставляем комментарий, будем разбираться! ヅ
Background info: I have followed DIY guide exactly to the letter. Running Vista (which stinks), using clear ebay cable, 09/07 build date.
INPA Problem: I am having two recurring INPA error messages. One of the messages comes up immediately upon start up of INPA application and the other occurs when I try to read the airbag module. The message reads:
Quote:
Warning
Registry Value Failed in SubKey:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Serial
From searching numerous threads on all coding related forums I have found that the solution to the problem might be to go into the registry and change some values around, but I do not know how to go about this (exactly). The answer I found may be here (http://forums.bimmerforums.com/forum/showthread.php?t=1471268[/url]) post #5.
The second error message comes up when I try to communicate or read the airbag. When I go to Karosserie>Airbag (as in the DIY) pressing F5 doesn’t do anything, but when I press enter button this error message comes up.
Quote:
Variant checking
Group file: D_SIM
IFG-0018: INITIALIZATION ERROR.
Program will be stopped
Edit: I just decided to skip INPA step. But if you can still help me with a solution I would greatly appreciate it. Also, I found out what was wrong with NCSEXPERT. I was not running the program «as administrator» once I did this I had no problems and was able to code my e90!
|
01-15-2013, 08:27 AM
|
#2025 |
|
BimmerPost Supporting Vendor
Drives: 2020 G20 320i M Sport Join Date: Apr 2010 Location: Canada & HK |
Quote:
Originally Posted by dos1973 this are my cafs Transaktions-Report: Aktion: Codierdaten lesen ACSM [1] [VIN EDITED] ACSM [1] [VIN EDITED] ACSM [1] [VIN EDITED] CMB_MEDIA [36] [VIN EDITED] DME [12] [VIN EDITED] DSC [29] [VIN EDITED] EKPM2 [17] [VIN EDITED] EPS [30] [VIN EDITED] FEM_BODY [40] [VIN EDITED] HU_CIC [63] [VIN EDITED] ICM [1c] [VIN EDITED] IHKA [78] [VIN EDITED] KOMBI [60] [VIN EDITED] REM [72] [VIN EDITED] ZBE2 [67] [VIN EDITED] I checked my CAFDs and I have the exact same setup as you. I just had a look underneath the trunk and I do in fact see a combox. What exactly do I need to do to enable the use of the white iPhone cable? Was it just the line you edited under combox media? |
|
01-15-2013, 09:06 AM
|
#2026 |
|
Lieutenant Colonel Drives: F30 328i M-Sport Join Date: Mar 2006 Location: Hong Kong |
Quote:
Originally Posted by avgor123 I think CHAMP has a DVD drive, but it can read only navigation DVD, not video or audio DVD. For audio CHAMP use audio and MP3/WMA CDs. CHAMP has dvd, but F30 (& the rest of the current BMW range w/bus nav) uses CHAMP 2 which doesn’t have dvd drive. |
|
01-15-2013, 09:06 AM
|
#2027 |
|
Lieutenant Colonel Drives: F30 328i M-Sport Join Date: Mar 2006 Location: Hong Kong |
Quote:
Originally Posted by Aritaurus I checked my CAFDs and I have the exact same setup as you. I just had a look underneath the trunk and I do in fact see a combox. What exactly do I need to do to enable the use of the white iPhone cable? Was it just the line you edited under combox media? Ask dos1973. |
|
01-15-2013, 10:40 AM
|
#2028 |
|
Private First Class
Drives: f30 318 2012 Join Date: Oct 2012 Location: Belgium |
Where exactly does one check for this trunk combox? |
|
01-15-2013, 10:55 AM
|
#2029 |
|
Lieutenant Colonel
Drives: 2012 F30 328i Join Date: Mar 2012 Location: SoCal |
Quote:
Originally Posted by ilhan1103 Where exactly does one check for this trunk combox? It’s under the trunk cover in the back. Take the trunk floor cover out completely (it just slides out) and in the back you will either see a combox, or an empty space. |
|
01-15-2013, 11:09 AM
|
#2030 |
|
New Member Drives: BMW F30 with Nav, no assist Join Date: Jan 2013 Location: United States |
Quote:
Originally Posted by clarence Ask dos1973. i too can confirm that i was able to make the coding changes necessary to get rid of the y cable on my combox media, and enable bt streaming. i tried the secondary method suggested by shawnsheridan (thanks!) and changed my vo order from 6nh to 6nk. follow the 3rd supplement guide at the beginning of the thread to do this. once i wrote the vo, then i went to the affected ecus (combox and hu_cic) and highlighted each one, and clicked code (not fdl code). the code changes were implemented automatically and the car now does bt streaming and music over regular usb! thanks for all the tips and help everyone. |
|
01-15-2013, 11:22 AM
|
#2031 |
|
General
Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX |
Quote:
Originally Posted by estragos ok thanks, I found it and it is allready installed,but: when I launch INPA or Tool32, I have an warning message from registry: «registry value failed in subkey: May be there are problems!» just for info, I run the software on a Windows Vista Laptop. I has to launch the installation of the software by select the Windows Xp compatibility. perhaps it is because I select STD:OBD and Com1 during installation?! wich port I must select, to use INPA and Tool32 with a ENET cable on the LAN port? I get my new F30 only on March 15, so I have to wait for test! Thanks again for your help!! Make sure you run them as an Administrator. __________________
|
|
01-15-2013, 11:27 AM
|
#2032 |
|
General
Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX |
Quote:
Originally Posted by ilhan1103 Where exactly does one check for this trunk combox? If you have HU_CIC, and you have CMB_MEDIA in your SVT, you have a standalone Combox ECU. It is not necessary to check for its physical presence on the the car. If you have the new HU_NBT, you will not see CMB_MEDIA in your SVT, as you do not have a standalone Combox ECU; however, you will have a Combox built into the HU_NBT Head Unit. __________________
|
|
01-15-2013, 12:26 PM
|
#2033 |
|
BimmerPost Supporting Vendor
Drives: 2020 G20 320i M Sport Join Date: Apr 2010 Location: Canada & HK |
Quote:
Originally Posted by protocolor i too can confirm that i was able to make the coding changes necessary to get rid of the y cable on my combox media, and enable bt streaming. i tried the secondary method suggested by shawnsheridan (thanks!) and changed my vo order from 6nh to 6nk. follow the 3rd supplement guide at the beginning of the thread to do this. once i wrote the vo, then i went to the affected ecus (combox and hu_cic) and highlighted each one, and clicked code (not fdl code). the code changes were implemented automatically and the car now does bt streaming and music over regular usb! thanks for all the tips and help everyone. Would you be able to post the parameters you changed to enable BT streaming and to get rid of the Y-cable? Thanks! |
|
01-15-2013, 12:42 PM
|
#2034 |
|
General
Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX |
Quote:
Originally Posted by Aritaurus Would you be able to post the parameters you changed to enable BT streaming and to get rid of the Y-cable? Thanks! He did not change any ECU parameters directly. He modified his VO by removing 6NH and replacing it with 6NK, and then he VO Coded HU_CIC, and it automatically handled all the required FDL Changes. __________________
|
|
01-15-2013, 01:28 PM
|
#2035 |
|
BimmerPost Supporting Vendor
Drives: 2020 G20 320i M Sport Join Date: Apr 2010 Location: Canada & HK |
Quote:
Originally Posted by shawnsheridan He did not change any ECU parameters directly. He modified his VO by removing 6NH and replacing it with 6NK, and then he VO Coded HU_CIC, and it automatically handled all the required FDL Changes. Is there a guide on how to do this or would I need someone else’s VO to load this on? Seems like dos1973 was able to modify a parameter on his COMBOX MEDIA CAFD to get his iDrive to read his white iPhone cable. |
|
01-15-2013, 01:30 PM
|
#2036 |
|
Lieutenant Colonel Drives: F30 328i M-Sport Join Date: Mar 2006 Location: Hong Kong |
Quote:
Originally Posted by ilhan1103 Where exactly does one check for this trunk combox? It seems: Radio Professional+6NH=No combox 606+6NH=No combox 609+6NH=Castrated combox. |
|
01-15-2013, 01:43 PM
|
#2037 |
|
New Member Drives: BMW F30 with Nav, no assist Join Date: Jan 2013 Location: United States |
Quote:
Originally Posted by clarence It seems: Radio Professional+6NH=No combox 606+6NH=No combox 609+6NH=Castrated combox. clarence, i think you’re correct. i have nav but no assist, and i had a combox that supposedly required a y cable and only allowed bluetooth streaming of phone calls. changing the vo gave me all the additional functionality. except i’m not certain if i can get text messages to show up. i suspect i’d have to add 6nr and go through all that stuff to get it to work? coding the vo for 6nk did seem to add an ‘office’ menu, but so far all thats in there is my contacts, no messages or any apps. |
|
01-15-2013, 01:43 PM
|
#2038 |
|
Private First Class
Drives: f30 318 2012 Join Date: Oct 2012 Location: Belgium |
Quote: Originally Posted by clarence Quote:
Originally Posted by ilhan1103 Where exactly does one check for this trunk combox? It seems: Radio Professional+6NH=No combox 606+6NH=No combox 609+6NH=Castrated combox. Thanks but I remember one of you instructing dos1973 or someone else to search for this castrated combox. Reason I want to check is there is an actual combox ncd file generated when I read my car. |
|
01-15-2013, 02:17 PM
|
#2039 |
|
Enlisted Member Drives: ’12 Jet Black 328i Sedan Join Date: Dec 2012 Location: SoCal |
Quote:
Originally Posted by protocolor clarence, i think you’re correct. i have nav but no assist, and i had a combox that supposedly required a y cable and only allowed bluetooth streaming of phone calls. changing the vo gave me all the additional functionality. except i’m not certain if i can get text messages to show up. i suspect i’d have to add 6nr and go through all that stuff to get it to work? coding the vo for 6nk did seem to add an ‘office’ menu, but so far all thats in there is my contacts, no messages or any apps. I have also heard from other sources that they were able to get BMW Live/internet enabled too with this car configuration. So they were able to get the bluetooth audio streaming work, get rid of the y-cable and get internet working! but i guess one step at a time |
|
01-15-2013, 02:36 PM
|
#2040 |
|
BimmerPost Supporting Vendor
Drives: 2020 G20 320i M Sport Join Date: Apr 2010 Location: Canada & HK |
Quote:
Originally Posted by protocolor clarence, i think you’re correct. i have nav but no assist, and i had a combox that supposedly required a y cable and only allowed bluetooth streaming of phone calls. changing the vo gave me all the additional functionality. except i’m not certain if i can get text messages to show up. i suspect i’d have to add 6nr and go through all that stuff to get it to work? coding the vo for 6nk did seem to add an ‘office’ menu, but so far all thats in there is my contacts, no messages or any apps. Hey, would you be able to tell me how I can change the VO to 6NK? So you’re able to use BT streaming and also use the regular iPhone cable? Thanks |
|
01-15-2013, 02:42 PM
|
#2041 |
|
Enlisted Member Drives: ’12 Jet Black 328i Sedan Join Date: Dec 2012 Location: SoCal |
Quote:
Originally Posted by protocolor i too can confirm that i was able to make the coding changes necessary to get rid of the y cable on my combox media, and enable bt streaming. i tried the secondary method suggested by shawnsheridan (thanks!) and changed my vo order from 6nh to 6nk. follow the 3rd supplement guide at the beginning of the thread to do this. once i wrote the vo, then i went to the affected ecus (combox and hu_cic) and highlighted each one, and clicked code (not fdl code). the code changes were implemented automatically and the car now does bt streaming and music over regular usb! thanks for all the tips and help everyone. Quote:
Originally Posted by Aritaurus Hey, would you be able to tell me how I can change the VO to 6NK? So you’re able to use BT streaming and also use the regular iPhone cable? Thanks The general directions are quoted from his earlier post. The PDF is on the first page under attachments, supplement part 3. You literally change the text in the SALAPA-Element Box from «6nh» to «6nk» and then you apply the changes. He is gonna work on getting maybe screen shots later regarding the ECU stuff. |
|
01-15-2013, 02:56 PM
|
#2042 |
|
Lieutenant Colonel Drives: F30 328i M-Sport Join Date: Mar 2006 Location: Hong Kong |
Quote:
Originally Posted by ilhan1103 Thanks but I remember one of you instructing dos1973 or someone else to search for this castrated combox. Reason I want to check is there is an actual combox ncd file generated when I read my car. It was me who asked dos to check for the existence of a combox, cos he had 609+6NH (i.e. no combox function) but he managed to code the 6NH into virtually a 6NK. We all know 6NH cannot do a 6NK w/o addtional hardware, so I asked him to see whether he really has combox with features deactivated. |
|
01-15-2013, 03:14 PM
|
#2043 |
|
General
Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX |
Quote:
Originally Posted by Aritaurus Is there a guide on how to do this or would I need someone else’s VO to load this on? Seems like dos1973 was able to modify a parameter on his COMBOX MEDIA CAFD to get his iDrive to read his white iPhone cable. See this Guide on how to modify your VO: http://www.f30post.com/forums/attach…3&d=1358466555 If you follow this complete, you will have written the modified VO to the car at the end. So, afterwards, you simply do this to VO Code the Head UNit: Connect => Read FA => Activate FA => Read VCM => Right-Click on HU_CIC (the ECU itself not the underlying CAFD) => Select CODE. __________________
|
|
01-15-2013, 03:29 PM
|
#2044 |
|
New Member Drives: BMW F30 with Nav, no assist Join Date: Jan 2013 Location: United States |
Quote:
Originally Posted by shawnsheridan See this Guide on how to modify your VO: http://www.f30post.com/forums/attach…3&d=1358466555 If you follow this complete, you will have written the modified VO to the car at the end. So, afterwards, you simply do this to VO Code the Head UNit: Connect => Read FA => Activate FA => Read VCM => Right-Click on HU_CIC (the ECU itself not the underlying CAFD) => Select CODE. yes, this is all i did to make it work. just for clarity in case you are confused, the ecu appears as a folder in e-sys, with the cafd files beneath it. highlight each affected ecu (in my case hu_cic and combox) and code them. |
|
01-15-2013, 04:43 PM
|
#2045 |
|
Private Drives: 2013 335i M-Sport Join Date: May 2012 Location: CA |
I’m running into a few issues when trying to recode anything after the FEM recall with 48.3 and 3.18.4. For example — FEM_BODY [40] I get the same thing in HU CIC http://www.f30post.com/forums/showpo…12324765…357 I’m a bit stuck. I believe I’m on F020-12-11-505. One difference I noticed is that when I update the CAFD I don’t get the little yellow dot next to the CAFD that I used to. |
|
01-15-2013, 04:46 PM
|
#2046 |
|
General
Drives: 2018 Alpina B6 650ix GC Join Date: Feb 2010 Location: Houston, TX |
Quote:
Originally Posted by KeenDriver I’m running into a few issues when trying to recode anything after the FEM recall with 48.3 and 3.18.4. For example — FEM_BODY [40] I get the same thing in HU CIC http://www.f30post.com/forums/showpo…12324765…357 I’m a bit stuck. I believe I’m running F020-12-11-505 You are connecting to F20 Target PSdZData without the _DIRECT after it, and via VIN? Did you delete and replace your existing PSdZData folder with the 48.3 one, or did you copy it on top of your old one? __________________
|
Vrogue
Resolution to bmw inpa error: registry value failed in subkey ediabas 5 2 compatabiity jaweros diagnostics obd ista error messages can dcan how read codes and activate features of your with errors solution all here obd2 scanner blog solve 94201 technical service initialization the auto repair technician home installing openvpn: querying netcfginstanceid complete diagnostic fault code list e36 e46 e90 more 4 fix if appear on startup youtube open windows server failover clustering hereauto 1500: another installation is progress (installing a land f/x inspired by actual events: cleanup after jdk 9 early ifh 0018: enable / disable autorun for drive (using registry) (samlogic решение проблем standard tools Форум автомастеров win32 library programming: enumerating i use software injector car tool 0x80072f8f 10: easy fixes techs magic 7 download wavesbrown 0x800704ec when turning defender? seeing driver 32? it simple steps