Rabax during sapgui logon ошибка

Symptom:

You can not login to the system due to following error popup:

Solution:

To solve the error, you need to figure out which short dump is happening at first, then solve it.

Following two ways can help you identify the short dump:

1. Eliminate the «rabax during sapgui logon» popup and display the dump (recommended):

•   Set profile parameter «login/quiet_mode» to 0.
•   Restart the system so that profile parameter changes take effect.
•   Reproduce the issue (logon to the system).
•   The popup «rabax during sapgui logon» should disappear now and you are able to:

       — see the dump directly.

       or

       — get more information about the short dump from corresponding dev_w* trace.

2. Increase trace level (for example «rsdisp/TRACE=2«) and try to log on again. The information of the short dump is then written in the corresponding dev_w* trace.

After the dump is identified, please try solve it or create an incident under corresponding component.

SAP Note 1824283 for more details.

How to deal with ‘Rabax during sapgui logon’ error?

During the login process a short dump «rabax during sapgui logon»  occurs and also SAP GUI connection terminates.

SOLUTION

In order to resolve this error first we need to figure out which error is happening at first and then solve it:

There are two methods by which you can identify this short dump:

1) First, eliminate popup ‘rabax during sapgui logon’ and display the dump. In order to do it do the following:

a) First set the profile parameter «login/quiet_mode» to zero

b) Then please restart the system so that changes in profile parameter could take effect.

c) Now regenerate the issue (logon to the system).

d) The popup ‘rabax during sapgui logon’ will now disappear and now you will able to:

• see the dump directly or you can also get more info about the error from corresponding dev_w* trace.

2) Increase trace level for «rdisp/TRACE=2» and try to log in again. The information of the is then written in corresponding with dev_w* trace.

After identifying the dump, please solve it or create an incident under the corresponding component.

Hi All,

I’m currently doing a system refresh of a non-Unicode system to a Unicode system using a homogenous database-specific method (which is perform a DB backup on the non-Unicode system then restore it to the Unicode system — overwriting the DB of the Unicode system).

Our systems (both the non-Unicode and Unicode system) resides on z/Linux and DB2 database.

Let’s call:

Unicode system — DND system

Non-Unicode system — XNX system

Other details:

XNX system is on SAP NW 740 (ERP6 EHP7) and Kernel 64-bit Non-Unicode patch 400.

I’ve performed the following after the DB restore was completed:

1. copied the Kernel files of XNX system to DND system including DB2 client (replaced the kernel files of DND system with that of the XNX system).

2. Updated the profiles of DND system reflecting the customized parameter of XNX system.

3. Compared the ENV variables of DND and XNX systems and all are virtually the same except for G_FILENAME_ENCODING (DND has a value of @locale, UTF-8, ISO-8859-1, CP1252 while XNX has @locale, UTF-8, ISO-8859-15, CP1252

After doing the above steps, DND system started. But when I tried to login to the system, I’m getting a «rabax during sapgui logon». I’ve viewed the developer trace files and there were errors:

1. Syntax Errors

—> example of syntax error is:

syntax error in program RADSHPBOPREFLIGHT

Field %_VIASELSCR is unknown. It is neither in one of the specified table nor defined by a «DATA» statement.

—> note that we DID NOT perform any modifications on SAP standard objects in XNX system.

2. R/3 system not supported with kernel 721.

—> I’ve already tried updating the kernel files to a higher version (as per note 217070 — I tried versions 722, 722 EXT, 742, and 745) but it’s giving me an error: Binary file not executable.

—> I also tried updating the Kernel files to a higher patch level (721 patch 700) but still getting the same error — rabax during sapgui logon. I also tried putting login/quiet_mode=1 as per note 1824283, but still encounters the same error.

Question: What other files do I need to update in order for SAP system to work?

Thanks.

Regards,

Kenneth

Hi All,

I’m currently doing a system refresh of a non-Unicode system to a Unicode system using a homogenous database-specific method (which is perform a DB backup on the non-Unicode system then restore it to the Unicode system — overwriting the DB of the Unicode system).

Our systems (both the non-Unicode and Unicode system) resides on z/Linux and DB2 database.

Let’s call:

Unicode system — DND system

Non-Unicode system — XNX system

Other details:

XNX system is on SAP NW 740 (ERP6 EHP7) and Kernel 64-bit Non-Unicode patch 400.

I’ve performed the following after the DB restore was completed:

1. copied the Kernel files of XNX system to DND system including DB2 client (replaced the kernel files of DND system with that of the XNX system).

2. Updated the profiles of DND system reflecting the customized parameter of XNX system.

3. Compared the ENV variables of DND and XNX systems and all are virtually the same except for G_FILENAME_ENCODING (DND has a value of @locale, UTF-8, ISO-8859-1, CP1252 while XNX has @locale, UTF-8, ISO-8859-15, CP1252

After doing the above steps, DND system started. But when I tried to login to the system, I’m getting a «rabax during sapgui logon». I’ve viewed the developer trace files and there were errors:

1. Syntax Errors

—> example of syntax error is:

syntax error in program RADSHPBOPREFLIGHT

Field %_VIASELSCR is unknown. It is neither in one of the specified table nor defined by a «DATA» statement.

—> note that we DID NOT perform any modifications on SAP standard objects in XNX system.

2. R/3 system not supported with kernel 721.

—> I’ve already tried updating the kernel files to a higher version (as per note 217070 — I tried versions 722, 722 EXT, 742, and 745) but it’s giving me an error: Binary file not executable.

—> I also tried updating the Kernel files to a higher patch level (721 patch 700) but still getting the same error — rabax during sapgui logon. I also tried putting login/quiet_mode=1 as per note 1824283, but still encounters the same error.

Question: What other files do I need to update in order for SAP system to work?

Thanks.

Regards,

Kenneth