Quicktime qts ошибка

Hi all,

I need some help getting my iTunes working. I installed Itunes 10.3.1.55 and ever since when I try to tun it I get the iTunes has stopped working error. When I try to start quicktime I get the quicktime has stopped working error.

help is appreciated,

Yaniv

The details for the iTune problem:

Problem signature:

Problem Event Name: BEX

Application Name: iTunes.exe

Application Version: 10.3.1.55

Application Timestamp: 4deec351

Fault Module Name: StackHash_fd00

Fault Module Version: 0.0.0.0

Fault Module Timestamp: 00000000

Exception Offset: 74737953

Exception Code: c0000005

Exception Data: 00000008

OS Version: 6.0.6002.2.2.0.256.4

Locale ID: 1033

Additional Information 1: fd00

Additional Information 2: ea6f5fe8924aaa756324d57f87834160

Additional Information 3: fd00

Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Read our privacy statement:

http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

The details for the quicktime problem:

Problem signature:

Problem Event Name: BEX

Application Name: QuickTimePlayer.exe

Application Version: 7.69.80.9

Application Timestamp: 4cf444ff

Fault Module Name: QuickTimePlayer.dll

Fault Module Version: 7.69.80.9

Fault Module Timestamp: 4cf444e1

Exception Offset: 00005b6d

Exception Code: c0000409

Exception Data: 00000000

OS Version: 6.0.6002.2.2.0.256.4

Locale ID: 1033

Additional Information 1: 9239

Additional Information 2: 99bbab63cf663ca0d9941d9429a6be81

Additional Information 3: ea5e

Additional Information 4: c0fff5ed7a4cc119ba59abfbc91dbca6

Read our privacy statement:

http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Ошибки в iTunes случаются не часто, но даже я за пару месяцев пользования iPad столкнулся уже с несколькими из них. Иногда особой расшифровки не требовалось, иногда же приходилось искать что означает та или иная ошибка в iTunes.

По каждой ошибке я планирую дополнять инструкцию. Если у вас в iTunes встретилась эта или другая ошибка – не стесняйтесь – описывайте проблему и ситуацию при которой ошибка возникла и мы постараемся помочь. 

Что означают ошибки iTunes?

ошибка 6 и ошибка 10 в iTunes

У вас неправильный лого для загрузки аппарата или режима восстановления. Просто пересоздаем Custom Firmware. Также Error 6 может означать, что вы восстанавливаете прошивку не из DFU mode.

ошибка 9 в iTunes

Означает, что либо гаджет не в DFU mode, либо требуется перезагрузить компьютер (у меня как раз была эта ошибка, помогла перезагрузка) и попробовать все заново (перевод в DFU и восстановление Custom Firmware).

ошибка 1015 в iTunes

Версии прошивки и версии модема не совпали. Может появиться при даунгрейде (понижении версии прошивки). JB пройдет до конца нормально, но baseband не будет соответствовать прошивке.

ошибка 16хх (1601, 1604, 1602, 1611 и т.д.) в iTunes

Означают, что программа не может проверить прошивку. Способы выхода из ситуации — выключить контроль учетных записей (UAC в Vista и Семерке); использовать самую последнюю версию iTunes; перенести файл прошивки в каталог с простым и коротким именем; скачать оригинальную прошивку с сайта Apple и заново создать пользовательскую прошивку; сменить USB-порт или правильно перевести девайс в DFU.

ошибка 1, 2, 5, 6, 10 в iTunes

Проблема в созданной прошивке — или не та версия, или файл поврежден, или не правильно создана пользовательская прошивка (всякие логотипы, дополнительные настройки итд). Если не поможет перезагрузка компьютера, попробуйте заново создать прошивку.

ошибка 11

Возникает, если внутри прошивки не хватает каких-нибудь файлов. Пояснение: содержимое прошивки можно посмотреть, так как это обычный zip архив с другим расширением. Скорей всего вы используете неоригинальную прошивку.

Решение: Скачать оригинальную прошивку. Ссылки на официальные прошивки: Прошивка iPad

ошибка 13 в iTunes

Проблема с USB портом — попробуйте достать кабель и снова вставить в порт, и если не поможет – переставить кабель в другой разъем.

ошибка 8 в iTunes

Эта прошивка для другого девайса. Скачайте прошивку именно для вашего телефона.

ошибка 0xE8000013 в iTunes

Ошибка синхронизации iTunes. Нужно повторить синхронизацию с iTunes.

ошибка 0xE8000001 в iTunes

Появляется в операционной системе Windows. Пользователям Windows нужно перезапустить сервис AppleMobileDeviceService.exe.

ошибка 0xE8008001 в iTunes

Это ошибка синхронизации. Необходимо в Cydia из репозитория http://cydia.haculo.us/ установить пакет AppSync for 3.0, если у вас на девайсе установлена прошивка 3.0, или AppSync for 3.1, если установлена прошивка 3.1 или 3.1.2

ошибка 39 в iTunes

Требуется последняя версия iTunes. Обновите iTunes.

Ошибка 1150 в iTunes

Симптомы:

Возникает при синхронизации музыки и видео

Решение:

Просто удалить iTunes и поставить его заново.

ошибка 1403 в iTunes

Файл прошивки поврежден. Перекачайте файл прошивки при помощи iTunes.

Ошибка 3194 в iTunes

В файле C:WindowsSystem32driversetchosts (Windows) или /etc/hosts (Mac OS X) и добавить следующий код последней строкой файла:

74.208.10.249 gs.apple.com

После чего можно запускать/рестартовать iTunes и делать восстановление через SHIFT+Восстановить и выбор прошивки

Ошибка 3014 в iTunes

Ошибка 3014 может указывать на то, что на перед повторной попыткой восстановления необходимо освободить место на жестком диске компьютера.

Ошибка -3221 в iTunes

Симптомы
Ошибка появляется при доступе к iTunes Store. На компьютере при этом установлен McAfee Personal Firewall Plus.

Решение
Если выскочила ошибка -3221, то в антивирусе измените права доступа iTunes и iTunes Helper на полные.

Ошибка -3259 в iTunes

Симптомы:

Ошибка возникает при попытке соединится с iTunes Store. Или при попытке скачать что-либо оттуда.

Решение:

1. Обновите iTunes до  последней версии

2. Попробуйте выключить брэндмауэр или любое стороннее антивирусное программное обеспечение (Norton Personal Firewall, McAfee, Symantec, и другие), которое теоретически может блокировать доступ к сети.

Ошибка 42408 или 42404 в iTunes

Решение:

Обновите iTunes до  последней версии.

PS. Решил потихоньку собирать все ошибки и решения в статью…. Так что иногда мой комментарий будет отсылать в статью – это значит я добавил решение, которое было найдено в интернете.

Загрузка…

Updated March 2023: Stop getting error messages and slow down your system with our optimization tool. Get it now at this link

1. Download and install the repair tool here.
2. Let it scan your computer.
3. The tool will then repair your computer.

quicktime.qts is a part of Microsoft® Windows® Operating System program developed by Apple Inc..Some applications or games may need this file to work properly. If quicktime.qts is error, whenever you start the application/game you may experience various kinds of errors. To fix those errors, please read the Recommended Solution below:

• Company: Apple Inc.
• Product: QuickTime
• Version: QuickTime 7.6.9 (168
• MD5: 1d856e6e7490447fcfaa46e09a2bf9c9
• Size: 12115968 Byte

Is quicktime.qts a virus

The legit quicktime.qts process is located in the c: program files quicktime qtsystem quicktime.qts folder. If it is located elsewhere, it could be malware as a virus can have any name. Some virus can pretend to be quicktime.qts and reside in the Windows or the System32 folder. One way to confirm would be to right-click on the file and use anti-virus software to scan it — download anti-virus here

What is quicktime.qts is error mean?

There are multiple reasons that may cause quicktime.qts errors. These include Windows registry issues, malicious software, faulty applications, etc.Error messages related to the quicktime.qts file can also indicate that the file has been incorrectly installed, corrupted or removed.

Other common quicktime.qts errors include:

• “quicktime.qts is missing”
• “quicktime.qts error loading”
• “quicktime.qts crash”
• “quicktime.qts was not found”
• “quicktime.qts could not be located”
• “quicktime.qts Access Violation”
• “The procedure entry point quicktime.qts error”
• “Cannot find quicktime.qts”
• “Cannot register quicktime.qts”

Recommended Solution to Fix quicktime.qts error

To quickly resolve your problem, we recommend download and use quicktime.qts Fix Tool,this tool perform a scan for quicktime.qts issues and other system errors. It will also check if all .dll and .exe files are registered in the system and scan for other issues that may be preventing system from working properly. After the scan process, it will allow you to repair the errors.

Step 1: Click the “Download Here” button to get an automatic tool.

Step 2: Install the utility by following simple installation instructions.

Step 3: Launch the program to fix your quicktime.qts errors and other issues.

Download Fix Tool to Remove quicktime.qts Error

I just recently started using version 17, I formerly used version 14, but upgraded recently because I loved 14. But I am having nothing but problems with 17. I started work on a family vacation video, but now all I get is a quicktime.qts error. 

This is the error message I get…

A serious program error has occurred. 

Error in module «QuickTime.qts» (Load address: 0x69f10000)

to address Ox69f3df58

Exception 0xc0000005 «ACCESS_VIOLATION»

Can somebody please tell me what is going on?

I have a relatively new Win 7 computer. I fit all the technical requirements for the software. I am using a Kodak Easyshare Camera that create .mov files. I am importing these .mov files in Magix.

Dec 18, 2009 12:12 PM in response to cottongd

QuickTime failed to initialize. Error #-2093

Doublechecking something before proceeding. Are you also getting another error saying something like the following?

The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll.

Do you have a 32-bit or 64-bit Windows 7?

Dec 18, 2009 1:36 PM in response to cottongd

Thanks, cotton!

Okay, we’ll try swapping out your existing QuickTime one more time, taking a few extra explicit precautions along the way.

First, download and save a fresh copy of the QuickTimeInstaller.exe to your hard drive. (Don’t run the install on line and don’t run the install just yet.) Get the installer that
doesn’t mention iTunes:

http://www.apple.com/quicktime/download/

Now head into your «Uninstall a Program» control panel and uninstall QuickTime.

Next we’ll remove any leftover QuickTime program files and folders.

Restart the PC.

Open Local Disk C: or whichever drive your *program files* are installed on.

Open the «Program Files» folder.

Right-click the «QuickTime» folder (if it still exists) and select Delete.

Go back into Local Disk C: or whichever drive your *Operating System files* are installed on.

Open the «Windows» folder.

Open the «system32» folder.

Right-click on the
QuickTime file (if it still exists) and select «Delete».

Right-click on the
QuickTimeVR file (if it still exists) and select «Delete».

Empty your Recycle Bin and restart the PC again.

After the PC restarts, *do not open any applications.* Disconnect from your network and/or the internet. Now disable
all your security software (firewall, antivirus, antispyware).

Now start the QuickTime install by doubleclicking on the QuickTimeInstaller.exe file you downloaded earlier.

Reenable all security software prior to reconnecting to the internet and/or your network.

Did that install seem to go through okay? If so, does QuickTime launch normally this time?

Dec 18, 2009 7:05 PM in response to cottongd

(There is not a system32 directory in Windows 7 — but I searched for any file named quicktime in the Windows and subdirs).

I believe there is … Try doing a search for the
QuickTimeVR file. What system directory do you currently find it in?

Dec 19, 2009 9:13 AM in response to cottongd

I searched the entire c drive for QuickTimeVR
.

Let’s try again with either QuickTimeVR.* or QuickTimeVR.qtx … any better luck then?

If you do find it, what’s the containing folder?

Dec 19, 2009 9:25 AM in response to cottongd

What drive is your operating system installed on, cotton?

Dec 19, 2009 9:55 AM in response to cottongd

There’s our problem. On a 32-bit system, after a QuickTime install, the QuickTime.qts and QuickTimeVR.qtx should be in there. (In a 64-bit system, they live in sysWOW64.)

Odd that neither file is being installed there for you … has the system32 folder inadvertently been set to «read only» by any chance?

Dec 25, 2009 9:10 AM in response to cottongd

Hello Cotton,

What did you magically do to correct this? I’ve followed all your steps, identifying the two quicktime files in the System32 folder and then you say you’re up and working. How did that happen.

I have Quicktime working on my Dell with Windows 7 Ultimate but my Sony running Windows 7 Professional is still giving me error 2095. The wierd thing is iTunes works just fine. All this is after I’ve uninstalled and reinstalled 5 or 6 times.

Важно: Сведения о продуктах, производимых не компанией Apple, предоставляются исключительно в информационных целях. Они не рекомендуются компанией Apple для использования и не рекламируются ею. Для того чтобы получить дополнительную информацию, свяжитесь с поставщиком.

Дата публикации: 28 янв. 2016 г.

As a multiplatform developed by Apple which is used to handle video, sound, animation, music etc., QuickTime has attracted many users in the past years. With the powerful multimedia technology which is inclusive of a suite of application, an environment for media authoring and a movie file format, QuickTime supports most video and audio formats and allows you to access over the Internet and streams of real-time data on Mac OS and Windows computers. Usually, QuickTime files exists in the QT, MOV AND MOOV formats. Besides, QuickTime is able to support a variety of video and audio codecs as well as other third-party codecs. As the default media player for Mac, QuickTime can provide you the fantastic audio and video quality for you with ease. But things don’t go smoothly all the time. Some buffering or errors may happen from now and then. You may be confused by the QuickTime 2096 during the process. Specifically, a prompt up saying that «QuickTime failed to initialize. Error # -2096» will result in the unusual situations. If you have also been puzzled by QuickTime error 2096, this article will take you to the right solutions.

Part 1: What is QuickTime error 2096?

There are many situations to be involved by QuickTime error 2096. The error can appear during program installation or during the improper compatibility mode. It is mainly seen like «QuickTime failed to initialize. Error # -2096». Sometimes, you try to open iTunes on your Windows operating system, this error may appear. Also, when you plan to use QuickTime as the media player on Windows, you may receive error 2096. Usually, when this error appears, your computer will stop running immediately. Therefore, what are the solutions when QuickTime failed to initialize error 2096 happens? Solutions may vary according to different causes.

In summary, the QuickTime error 2096 appears due to two major causes. The first is the system you are running is not compatible with the QuickTime, so QuickTime player doesn’t react to the system properly. The second falls to the incomplete installation of QuickTime. Furthermore, sometimes the virus invasion could also result in the error 2096. In order to solve the QuickTime error 2096, you can take the following steps one by one to figure out this problem.

Solution 1. Update device drivers

QuickTime error 2096 can be related to the outdated device drivers. The performance of device drivers presents to be very different in each day. The best way is to keep tracking with the latest device drivers. You can check and update device drivers very often.

Solution 2. Conduct a full scan of your computer

Sometimes, the malware may infect your computer which has already damaged and ruined the QuickTime related files so that your player is not able to play properly. Download a professional malware protection program and conduct a full malware scan for your computer. Then restart your computer to check whether it could be resolved or not.

Solution 3. Uninstall and reinstall QuickTime.

Just as mentioned above, the QuickTime error 2096 appear due to the incomplete installation of QuickTime. If you are not sure which suites are missing, you had better uninstall QuickTime immediately and reinstall it then by making sure no other actions are taken.

Part 3: How to avoid QuickTime error 2096?

By trying the above steps, you may still find that it doesn’t work at all. So, you can’t help asking are there any other efficient ways to avoid QuickTime error 2096. Absolutely, it is entirely possible to avoid the error 2096 at the beginning. For example, you had better avoid using QuickTime on the non-Mac operating systems which may decrease the possibilities to be incompatible. The second point will be more direct. That is to find another media player as the QuickTime alternative. Among the numerous media players, I will recommend Leawo Blu-ray Player for you. As one of the most powerful media player, Leawo Blu-ray Player is excellent in playing more than 180+ formats playbacks with the best audio and video quality retained. With the advance video processing technology, it could provide you quality-lossless image for even 4K video, stereo audio enjoyment, all regions free DVD decryption and user-oriented playback control.

Step 1. Download Leawo Blu-ray Player and install it.

Step 2. Load the files. You can just click «Open File» to load the files you would like to play on Leawo Blu-ray Player, or you can drag the files to the main panel directly.

Step 3. Settings. After loading the file, it will be played automatically. During the playback, you can move mouse to the title area. Then you could see 4 icons.

Then select the first, second and third icon respectively to set the Subtitles, Video and Audio parameters one by one so that you will obtain a more customized display effects.

Conclusion

Well, each media player has its own limitations and incompatibilities with some operating systems. When you encounter that QuickTime failed to initialize error 2096, just relax and take it easy. Try to make a full scan of the player itself and your own computer’s device driver. Or at last, you can take your eyes from QuickTime to Leawo Blu-ray Player which will provide you the best playback solutions without any buffering.

1. 05-22-04, 08:13 PM

   #1

   «Quicktime Unavailable

   Quicktime failed to initialize. Error # -2093.

   Please make sure Quicktime is properly installed on this computer.»

   I get that message whenever I try to start up quicktime. Wtf mate? I uninstalled and cleaned off all the quicktime stuff and reinstalled and it did the same thing. I uninstalled/reinstalled about 3 times, and I downloaded new install files to make sure the install.exe wasn’t corrupt. I also searched the internet and I found something saying that other programs might secretly install on my computer when I install Quicktime and the errors might be associated with those secret programs interfering w/ Quicktime, but I ran Ad-aware and Spybot and did not find anything

   Oh, and btw, I get this message when I try to stream something:

   «Quicktime Unavailable

   Quicktime failed to initialize. Error # 0.

   Please make sure Quicktime is properly installed on this computer.»

   Right after I close that error, another error box pops up:

   «Plugin Error

   The plugin did not initialize properly.»

   I have no idea what a plugin is or any other stuff it’s talking about. Any help, ideas, or suggestions is greatly appreciated. Thanks in advance.

   You played the Song of Storms!

   ---

2. 05-22-04, 09:37 PM

   #2

   There aren’t any «secret» programs that get installed with QuickTime.

   ---

3. 05-23-04, 07:45 AM

   #3

   Last edited by mnosteele52; 05-23-04 at 03:20 PM.

   ---

4. 05-23-04, 03:16 PM

   #4

   Originally Posted by mnosteele52

   Try [url=http://www.free-codecs.com/download/QuickTime_Alternative.htm]QuickTime Alternative]/url] instead.

   

   I installed Quicktime Alternative and this is what I got when trying to configure QuickTime Settings:

   «Control Panel

   An error occured while Windows was working with the Control Panel file C:WINDOWSSYSTEMQUICKTIME.CPL»

   And once again, when I stream any videos, I get this:

   «Quicktime Unavailable

   Quicktime failed to initialize. Error # 0.

   Please make sure Quicktime is properly installed on this computer.»

   Right after I close that error, another error box pops up:

   «Plugin Error

   The plugin did not initialize properly.»

   I’m really getting frustrated with this. I’ve been trying everything I can think of. If anyone can help me to solve this problem, I will be so greatly appreciated and I’ll sprinkle you with many rep points. I’ll wait until I’ve spreaded around rep points than I’ll sprinkle you again and again and again…

   You played the Song of Storms!

   ---

5. 05-24-04, 05:43 PM

   #5

   Bump.

   A little help, anyone, please?

   You played the Song of Storms!

   ---

6. 05-24-04, 05:49 PM

   #6

   you can always try jetaudio to play quicktime files, sometimes i use it instead of quicktime.

   4930K@4.3~32GBGskill~asusX79deluxe~Vega64~240GB-SSD-OS drive~500GB-SSD-scratch~240GB-SSD-thrash~10TB storage~6.4TB-ioMemorycard~Windows 7 pro
   *~ SG stats

   ---

7. 05-24-04, 06:45 PM

   #7

   You played the Song of Storms!

   ---