Psql ошибка не удалось подключиться к серверу

I found uninstalling Postgres sounds unconvincing.
This helps to solve my problem:

1. Start the postgres server:

   sudo systemctl start postgresql
   

2. Make sure that the server starts on boot:

   sudo systemctl enable postgresql
   

Detail information can be found on DigitalOcean site Here.

I failed to solve this problem with my postgres-9.5 server. After 3 days of zero progress trying every permutation of fix on this and other sites I decided to re-install the server and lose 5 days worth of work. But, I did replicate the issue on the new instance. This might provide some perspective on how to fix it before you take the catastrophic approach I did.

First, disable all logging settings in postgresql.conf. This is the section:

# ERROR REPORTING AND LOGGING

Comment out everything in that section. Then restart the service.

When restarting, use /etc/init.d/postgresql start or restart
I found it helpful to be in superuser mode while restarting. I had a x-window open just for that operation. You can establish that superuser mode with sudo -i.

Verify that the server can be reached with this simple command: psql -l -U postgres

If that doesn’t fix it, then consider this:

I was changing the ownership on many folders while trying to find a solution. I knew that I’d probably be trying to revert those folder ownerships and chmods for 2 more days. If you have already messed with those folder ownerships and don’t want to completely purge your server, then start tracking the settings for all impacted folders to bring them back to the original state. You might want to try to do a parallel install on another system and systematically check the ownership and settings of all folders. Tedious, but you may be able to get access to your data.

Once you do gain access, systematically change each relevant line in the # ERROR REPORTING AND LOGGING section of the postgresql.conf file. Restart and test. I found that the default folder for the logs was causing a failure. I specifically commented out log_directory. The default folder the system drops the logs into is then /var/log/postgresql.

Possibly it could have happened because you changed the permissions of the /var/lib/postgresql/9.3/main folder.

Try changing it to 700 using the command below:

sudo chmod 700 main

This is not exactly related to the question since I’m using Flask, but this was the exact error I was getting and this was the most relevant thread to get ideas.

My setup: Windows Subsystem for Linux, Docker-compose w/ makefile w/ dockerfile, Flask, Postgresql (using a schema consisting of tables)

To connect to postgres, setup your connection string like this:

from flask import Flask
app = Flask(__name__)
app.config['SQLALCHEMY_DATABASE_URI'] = "postgresql+psycopg2://<user>:<password>@<container_name_in_docker-compose.yml>/<database_name>"

NOTE: I never got any IP (e.g. localhost, 127.0.0.1) to work using any method in this thread. Idea for using the container name instead of localhost came from here: https://github.com/docker-library/postgres/issues/297

Set your schema:

from sqlalchemy import MetaData
db = SQLAlchemy(app, metadata=MetaData(schema="<schema_name>"))

Set your search path for your functions when you setup your session:

db.session.execute("SET search_path TO <schema_name>")

answered Mar 29, 2019 at 21:30

The most upvoted answer isn’t even remotely correct because you can see in the question the server is running on the expected port (he shows this with netstat).

While the OP did not mark the other answer as chosen, they commented that the other answer (which makes sense and works) was sufficient,

But for these reasons that solution is poor and insecure even if it the server wasn’t running on port 5432:

What you’re doing here when you say --purge is you’re deleting the configuration file for PostgreSQL ((as well as all of the data with the database. You or may not even see a warning about this, but here is the warning just to show you now,

Removing the PostgreSQL server package will leave existing database clusters intact, i.e. their configuration, data, and log directories will not be removed. On purging the package, the directories can optionally be removed. Remove PostgreSQL directories when package is purged? [prompt for yes or no]

When you add it again PostgreSQL is reinstalling it to a port number that’s not taken (which may be the port number you expect). Before you even try this solution, you need to answer a few questions along the same line:

• Do I want multiple versions of PostgreSQL on my machine?
• Do I want an older version of PostgreSQL?
• What do I want to happen when I dist-upgrade and there is a newer version?

Currently when you dist-upgrade on Ubuntu (and any Debian variant), the new version of PostgreSQL is installed alongside the old copy and the port number on the new copy is the port number of the old copy + 1. So you can just start it up, increment the port number in your client and you’ve got a new install! And you have the old install to fall back on — it’s safe!

However, if you only one want version of PostgreSQL purging to change the configuration is still not the right option because it will destroy your database. The only time this could even be acceptable is you want to destroy everything related to PostgreSQL. You’re better off ensuring your database is correct and then merely editing the configuration file so the new install runs on the old port number

#!/bin/bash

# We can find the version number of the newest PostgreSQL with this
VERSION=$(dpkg-query -W -f "\${Version}" 'postgresql' | sed -e's/+.*//')
PGCONF="/etc/postgresql/${VERSION}/main/postgresql.conf"

# Then we can update the port.
sudo sed -ie '/port = /s/.*/port = 5432/' "$PGCONF"

sudo systemctl restart postgresql

Do not install a specific version of PostgreSQL. Only ever install postgresql. If you install a specific version then when you dist-upgrade your version will simply remain on your computer forever without upgrades. The repo will no longer have the security patches for the old version (which they don’t support). This must always be suboptimal to getting a newer version that they do support, running on a different port number.

answered Aug 4, 2021 at 18:30

I had the exact same problem Peter Eisentraut described. Using the netstat -nlp | grep 5432 command, I could see the server was listening on socket /tmp/.s.PGSQL.5432.

To fix this, just edit your postgresql.conf file and change the following lines:

listen_addresses = '*'
unix_socket_directories = '/var/run/postgresql'

Now run service postgresql-9.4 restart (Replace 9-4 with your version), and remote connections should be working now.

Now to allow local connections, simply create a symbolic link to the /var/run/postgresql directory.

ln -s /var/run/postgresql/.s.PGSQL.5432 /tmp/.s.PGSQL.5432

Don’t forget to make sure your pg_hba.conf is correctly configured too.

answered Nov 20, 2015 at 16:44

In my case, all i had to do was this:

sudo service postgresql restart

and then

sudo -u postgres psql

This worked just fine.
Hope it helps.
Cheers .

answered Jun 29, 2017 at 17:21

Find your file:

sudo find /tmp/ -name .s.PGSQL.5432

Result:

/tmp/.s.PGSQL.5432

Login as postgres user:

su postgres
psql -h /tmp/ yourdatabase

I had the same problem (on Ubuntu 15.10 (wily)). sudo find / -name 'pg_hba.conf' -print or sudo find / -name 'postgresql.conf' -print turned up empty. Before that it seemed that multiple instances of postgresql were installed.

You might have similar when you see as installed, or dependency problems listing

.../postgresql
.../postgresql-9.x 

and so on.

In that case you must sudo apt-get autoremove each package 1 by 1.

Then following this to the letter and you will be fine. Especially when it comes to key importing and adding to source list FIRST

sudo apt-get update && sudo apt-get -y install python-software-properties && wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | sudo apt-key add -

If not using wily, replace wily with your release, i.e with the output of lsb_release -cs

sudo sh -c 'echo "deb http://apt.postgresql.org/pub/repos/apt/ wily-pgdg main" >> /etc/apt/sources.list.d/postgresql.list'
sudo apt-get update && sudo apt-get install postgresql-9.3 pgadmin3

And then you should be fine and be able to connect and create users.

Expected output:

Creating new cluster 9.3/main ...
config /etc/postgresql/9.3/main
data   /var/lib/postgresql/9.3/main
locale en_US.UTF-8
socket /var/run/postgresql
port   5432

Source of my solutions (credits)

While having the same issue I tried something different:

Starting the postgresql daemon manually I got:

FATAL:  could not create shared memory segment ...
   To reduce the request size (currently 57237504 bytes), reduce PostgreSQL's
   shared memory usage, perhaps by reducing shared_buffers or max_connections.

So what I did was to set a lower limit for shared_buffers and max_connections into postgresql.conf and restart the service.

This fixed the problem!

Here’s the full error log:

$ sudo service postgresql start
 * Starting PostgreSQL 9.1 database server                                                                                                                                                               * The PostgreSQL server failed to start. Please check the log output:
2013-06-26 15:05:11 CEST FATAL:  could not create shared memory segment: Invalid argument
2013-06-26 15:05:11 CEST DETAIL:  Failed system call was shmget(key=5432001, size=57237504, 03600).
2013-06-26 15:05:11 CEST HINT:  This error usually means that PostgreSQL's request for a shared memory segment exceeded your kernel's SHMMAX parameter.  You can either reduce the request size or reconfigure the kernel with larger SHMMAX.  To reduce the request size (currently 57237504 bytes), reduce PostgreSQL's shared memory usage, perhaps by reducing shared_buffers or max_connections.
    If the request size is already small, it's possible that it is less than your kernel's SHMMIN parameter, in which case raising the request size or reconfiguring SHMMIN is called for.
    The PostgreSQL documentation contains more information about shared memory configuration.

1. Check the status of postgresql:

   service postgresql status
   

   If it shows online, proceed to step no 3 else execute step no 2.

2. To make postgresql online, execute the following command:

   sudo service postgresql start
   

   Now check the status by running the command of the previous step. It should show online.

3. To start psql session, execute the following command:

   sudo su postreg
   

4. Finally, check if it’s working or not by executing:

   psql
   

Restart postgresql by using the command

sudo /opt/bitnami/ctlscript.sh restart postgresql

answered Apr 26, 2022 at 9:41

This error could mean a lot of different things.

In my case, I was running PostgreSQL 12 on a virtual machine.

I had changed the shared_buffer config and apparently, the system administrator edited the memory config for the virtual machine reducing the RAM allocation from where it was to below what I had set for the shared_buffer.

I figured that out by looking at the log in

/var/log/postgresql/postgresql-12-main.log

and after that I restarted the service using

sudo systemctl restart postgresql.service

that’s how it worked

answered Jun 30, 2022 at 9:47