-
Workaround to Cluster not ready no quorum (500) permanently!
I have two nodes connected on a cluster, one of them is my router too. I created clusters to be easily manage and transfer VMs and LXCs. I don’t use things like HA or ZFS.
The problem is if I restart the machine that is with my router, VMs and LXCs doesn’t started because error «Cluster not…
- vctgomes
- Thread
-
500
cluster error
error 500
no quorum
- Replies: 8
- Forum: Proxmox VE: Installation and configuration
-
[SOLVED] Error 500 cluster not ready. Please help
Hello, I had a cluster, one of the servers disappeared. After that I cant run any of my vms. And inside of the cluster tab the cluster information is grayed out but it still shows that there are two nodes. When I look at the status of Corosync it says «Could not open /etc
corosync/authkey: No…- thecharliewahl
- Thread
-
error 500
help needed
node
support
- Replies: 5
- Forum: Proxmox VE: Installation and configuration
-
Check of pool pve/data failed (status:1). Manual repair required!
Good afternoon, I’m asking for help in recovering damaged metadata after a 220V drop on the server, when the power was restored and the server booted up, I got an error in the Proxmox panel
Check of pool pve/data failed (status:1). Manual repair required!
then booted from LiveCD debian mounted…
- Delari
- Thread
-
error 500
pve
- Replies: 1
- Forum: Proxmox VE: Installation and configuration
-
No route to host
Good afternoon,
I am having issues while trying to configure a cluster. I can access all machines with Proxmox installed, via browser, but the machines can´t communicate with each other. I can’t even ping from one machine to another, but all configs are all right.
When I try to join a cluster…
- bl0ckhaus
- Thread
-
cluster configuration
connection error
error 500
- Replies: 6
- Forum: Proxmox VE: Networking and Firewall
-
Removed USB disk used for backups, storage null error now
Hi, I have a very small Proxmox node installed and I used to have a USB 3.0 hard disk as my simple backup for my VMs and CTs. This disk died, and I simply deattached it, however, now when I go to «Backup» section for each CT or VM that used that disk to automatically create backups, I get…
- heldmar
- Thread
-
backup
disk error
error 500
loop
- Replies: 2
- Forum: Proxmox VE: Installation and configuration
-
[SOLVED] Error 500 since nginx installation
Hello,
i have a multihomed server and wanted to have a reverse proxy which can balance between all ip. Unfortunately, since i installed it, the gui isnt working properly. I cant open consoles and i have error 500: proxy not allowed everywhere
cat /etc/nginx/sites-enabled/proxmox
upstream…- magnum
- Thread
-
error 500
nginx
- Replies: 7
- Forum: Proxmox VE: Networking and Firewall
-
[SOLVED] Connection failed (Error 500: failed to get address info for: pve: Name or service not known) — Solved
Good morning.
I have a proxmox in version 7.0-11 that is presenting the error, just when I click on its shell, on any pve and on the server itself.
Error failed (Error 500: failed to get address info for: pve: Name or service not known), has anyone ever experienced this error? -
[SOLVED] PVE can not connect to PBS; Error 500 can not get datastores
Hello everyone,
for my problem, i found this «old» thread but unfortunately, the only solution proposed by this thread was different from the original poster and mine, so i’d like to give this topic a bump.
I already had this problem in a different setup and was able to resolve it with a fresh…- Spinning_rust
- Thread
-
can not find datastores
error 500
error fetching datastores
pbs
pbs 2.0
- Replies: 6
- Forum: Proxmox Backup: Installation and configuration
-
SSL connect attempt failed, error 500 when trying to view changelog of updates and git clone a repository TLS error
Hello everyone,
1- Everything works fine when I update the repository list and upgrade all packages, but when I try to view the changelog, 50% of the time for the debian packages and 100% of the time for Proxmox enterprises packages, I get the error you can see in both screenshot. Looking at the…- olivier.turcot
- Thread
-
changelog
error 500
failed
git clone
https
ssl
tls
- Replies: 2
- Forum: Proxmox VE: Networking and Firewall
-
Proxmox-backup-client failed : Error: EACCES: Permission denied (500)
Hello guys !
I rely on you because I have a problem !
I have 4 servers on which PBS is installed. On this 4 servers, two of them can no longer connect to PBS and their storages went to the status of «unknown» and when I go the «backup» tab, I read this error message …
- Frenshow
- Thread
-
error 500
permission denied
proxmox backup
proxmox backup client
- Replies: 11
- Forum: Proxmox Backup: Installation and configuration
-
Error 500: can’t activate storage ‘Storage1’ on node ‘NodeB’
Brand New installation — 2nd node — I have a disk for loading ISOs, cannot upload any iso, its starts uploading and gives me this error.
This same storage can load container templates and use them.
I am also able to use this disk for creating and running VMs and Containers, but cannot load ISOs… -
[SOLVED] «local» storage: unable to display content
Hello,
Following the update of proxmox 5 to 6, the contents of the «local» storage (/var/lib/vz) of one of the servers of the cluster are no longer accessible from the web interface.
No problem to display the assembly summary,
However an error occurs when displaying the content (from any…- Donald F
- Thread
-
error 500
local storage
proxmox 6
upgrade 5to6
- Replies: 9
- Forum: Proxmox VE: Installation and configuration
-
Eror noVNC, Error console, Error to Stop, Error to Reboot, Error to Remove
Hi everyone, pls hlp how to solve all of thats problem, I create LXC but cannot open the console (Blank Console), I try to make a new one still the same, I try to make VM and try to open console just same failed to connect to server noVNC, I try to Stop or shutdown for remove but eror message…
- kimelecta
- Thread
-
error
error 500
error 501
- Replies: 1
- Forum: Proxmox VE: Installation and configuration
-
Closing file ‘/var/log/pve/tasks/active.tmp.5718’ failed — No space left on device (500)
utSuddenly the root space is full and i’m not able to access or alter few my VMs.. shows error «closing file ‘/var/log/pve/tasks/active.tmp.5718’ failed — No space left on device (500)» how can i fix it? i have deleted some uploades ISO files from systems but this doesn’t work. do i have to…
- pranit
- Thread
-
error 500
local-lvm no space left on device
root space full
- Replies: 6
- Forum: Proxmox VE: Installation and configuration
-
Storage Error with migrating VM’s (Offline and Online)
Hi all,
Im fairly new to Proxmox and am trying to get a small working cluster of 2 nodes. I set up network, storage, etc but can’t seem to get the migration of VM’s to work. Each time I get an error saying: storage ‘local-vm’ is not available on node ‘vhost2’ (500)
My setup is as follows…
- Corona
- Thread
-
cluster configuration
error 500
migrating
migration failed
- Replies: 1
- Forum: Proxmox VE: Installation and configuration
-
CIFS: storage is not online (500)
Hi,
I have a proxmox 5.2-3 recently installed and I want to add a new cifs storage but always get the same error:
«create storage failed: error with cfs lock ‘file-storage_cfg’: storage ‘SambaQuique’ is not online»I had tried from Webgui, from cli and same error, but I can mount that share by…
- Enrique Garcia Polo
- Thread
-
cifs
error 500
storage
- Replies: 43
- Forum: Proxmox VE: Installation and configuration
-
[SOLVED] rbd error: rbd: couldn’t connect to the cluster! (500)
Hey,
i found many threads with the same issue but all they have the same solution (missing keyring).
I checked them but i din´t find my mistake maybe someone can give me a hint.storage.cfg:
i´ve did:
cp /etc/ceph/ceph.client.admin.keyring /etc/pve/priv/ceph/rbd.keyring
file is now present…- Deleted member 46289
- Thread
-
error 500
proxmox 4.4
rbd
- Replies: 0
- Forum: Proxmox VE: Installation and configuration
-
NFS error 500
Hi there.
Running cat /etc/pve/storage.cfg
Output:dir: local
path /var/lib/vz
content images,iso,vztmpl,backup,rootdir
maxfiles 25nfs: Backup
path /mnt/pve/Backup
server XXX.XXX.XXX.XXX
export /home/node2
options vers=3,nolock…- xXKaasXx
- Thread
-
error 500
nfs
- Replies: 5
- Forum: Proxmox VE: Installation and configuration
-
[SOLVED] Proxmox 4. «No quorum» error.
Hi all!
I have a few Proxmox servers in the cluster. Today, one server has dropped out of the cluster and returns an error «cluster not ready — no quorum».
Tell me, please, where and what to see, what would solve the problem?root@R38P-01-VS3:~# pveversion -v
proxmox-ve: 4.2-64 (running kernel…- pumko-adm
- Thread
-
cluster error
error 500
- Replies: 7
- Forum: Proxmox VE: Installation and configuration
When I tried restarting my proxmox server, it gave me the error `Conection failed (Error 500: closing file ‘/var/tmp/pve-reserved-ports.tmp.2733771’ failed — No space left on device)`
The whole system restarted, now I cannot connect to the web panel at all but the console does open through termius, ect.
I’m not sure what I can delete in this, the drive in there is a 500gb ssd
Proxmox: cluster not ready – no quorum? (500). Easy fix
cluster not ready – no quorum
To easy fix on cluster not ready – no quorum? (500) error on proxmox serverrun command:
# pvecm expected 1
Proxmox Change IP Address
If you like what you are reading, please:
Buy me a coffee
Related
arstech
This issue was originally opened by @dnv in hashicorp/packer#11149 and has been migrated to this repository. The original issue description is below.
Overview of the Issue
Roughly 2/3 of the time I am building my templates, the build errors out in the final stages, succesfully creating the actual template regardless, but with its «Packer ephemeral build VM» description and name intact. At first it «felt» like I got rid of the issue by adding the final sync command to the shell builder, but this was apparently transient/imaginary, as after 3-4 succesfull builds with no errors in a row I started experiencing the problem again.
I have now run the build several times in a row changing nothing in-between and sometimes I do get the error and sometimes not. Having done some additional testing I can now see that this has something to do with creating new VMs/templates and deleting them. The error does not seem to ever occur in the following scenario: 6 VMs are running, I run Packer to create a new template, it suceeeds, I delete the template and create it anew. But somewhere in the logic, there is a problem that manifests itself if you create a template, create a new VM from said template, keep it running, delete something with a lower vm_id and try creating a new template with Packer.
Packer version
Packer version: 1.7.3 [go1.16.5 linux amd64]
Simplified Packer Buildfile
https://gist.github.com/dnv/7e6778870f070b125cd6fade7f98aa33
Operating system and Environment details
Running Packer on RHEL 8.4 VM
Proxmox Virtual Environment 6.4-8
Log Fragments and crash.log files
The relevant part of the log is:
2021/07/15 18:14:20 [INFO] (telemetry) ending shell
==> proxmox: Stopping VM
==> proxmox: Converting VM to template
2021/07/15 18:14:22 packer-builder-proxmox plugin: template_id: 108
==> proxmox: Error updating template: 500 got no worker upid — start worker failed
==> proxmox: Provisioning step had errors: Running the cleanup provisioner, if present…
==> proxmox: Stopping VM
==> proxmox: Deleting VM
2021/07/15 18:14:22 [INFO] (telemetry) ending proxmox
==> Wait completed after 5 minutes 47 seconds
2021/07/15 18:14:22 machine readable: error-count []string{«1»}
==> Some builds didn’t complete successfully and had errors:
2021/07/15 18:14:22 machine readable: proxmox,error []string{«Error updating template: 500 got no worker upid — start worker failed»}
==> Builds finished but no artifacts were created.
Build ‘proxmox’ errored after 5 minutes 47 seconds: Error updating template: 500 got no worker upid — start worker failed
==> Wait completed after 5 minutes 47 seconds
==> Some builds didn’t complete successfully and had errors:
—> proxmox: Error updating template: 500 got no worker upid — start worker failed
==> Builds finished but no artifacts were created.
Search Our Database
How to solve VM is Locked (backup) (500)
Last updated on
|
Proxmox. ERROR: VM is locked (backup) (500)
Sometime customer wants to reboot their VM but unable due to OR Manual Proxmox backup process gets stuck, it impossible to make any changes to VM. You will get following error “VM is locked (backup) (500)”
In order to solve this issue, simply run this command in the proxmox SSH.
To unlock KVM VM
qm unlock <VM ID>
To unlock LXC VM
pct unlock <VM ID>