Par 31maa коды ошибок

Устранение неисправностей

При возникновении ошибки отобразится следующее окно.

Проверьте статус ошибки, остановите работу и свяжитесь с дилером.

Информация об ошибках

Код ошибки

Ошибка устр.

Адрес обращ.

модели

Серийный №

Сброс ошибок:Кнопка сброса

Стр.

Информация об ошибках

Контактная информация

Продавец

Тел.

Сброс ошибок:Кнопка сброса

Стр.

8

Будут отображены код ошибки, блок с ошибкой, адрес

обращения, название модели блока и серийный номер.

Имя модели и серийный номер будут отображаться только, если

Вн

№

эта информация была зарегистрирована.

Нажмите кнопку 7 ( F1 ) или 8 ( F2 ) для перехода к

следующей странице.

Сброс

мигание

Контактная информация (номер телефона дилера) будет

отображаться, если она была введена.

Сброс

• Contents

• Table of Contents

• Troubleshooting

• Bookmarks

Summary of Contents for Mitsubishi Electric PAR-31MAA

• 1, Mitsubishi Electric PAR-31MAA CITY MULTI Control System and Mitsubishi Mr. Slim Air Conditioners MA Remote Controller PAR-31MAA Simple Operation Manual Prior to use, thoroughly read the instructions in this manual to use the product correctly. Retain for future reference. Make sure that this manual, CD-ROM, and the Installation Manual are passed on to any future users. To ensure safety and proper operation of the remote controller, the remote controller should only be installed by qualified perso…

• 2, 2 WARNING • Thoroughly read the following safety precautions before using the unit. • Observe these precautions carefully to ensure safety. CAUTION Indicates a risk of death or serious injury. Indicates a risk of serious injury or structural damage. WARNING Safety precautions • After reading this manual, pass it on to the end user to retain for future reference. • Keep this manual for futur…

• 3, 3 CAUTION To reduce the risk of fire or explosion, do not place flammable materials or use flammable sprays around the controller. To reduce the risk of damage to the controller, do not directly spray insecticide or other flammable sprays on the controller. To reduce the risk of environmental pollution, consult an authorized agency for proper disposal of remote controller. To reduce the risk of electric shock or malfunctions, do not touch the touch pane…

• 4, 4 Names and functions of controller components Display The main display can be displayed in two different modes: «Full» and «Basic.» The factory setting is «Full.» Fri Mode Temp. Fan Room Cool Auto Set temp. Fri Cool Mode Temp. Fan AutoSet temp. 1 2 3 4 5 j i 4 3 hgfedcb 6 8 0 1 a 7 9 k 5 2 Fan speed setting appears here. 4Fan speed Appears while the units are operated in the energy-save mode. Appears while the outdoor units are operated in the sil…

• 5, 5 Basic operations Press button 1 ( ON/OFF ). Press button 7 ( F1 ) to go through the operation modes. Turning ON and selecting operation mode Preset temperature setting Cool Dry Fan Auto Heat Auto cool Auto heat 1 2 The ON/OFF lamp and the LCD will light up. F1 *1 Operation modes that are not available to the connected indoor unit models will not appear on the display. *2 Single or dual set points will appear, depending on the indoor unit model. * Interlocked operation is perfo…

• 6, Fan speed setting Auto Press button 0 ( F4 ) to go through the fan speed. * The number of available fan speeds depends on the model. <Note> The actual fan speed will be different from the fan speed displayed on the LCD when one of the following conditions is met. • While «Standby» or «Defrost» is displayed • When the room temperature is higher than the preset temperature during the heating mode • Right after the heating opera…

• 7, Mitsubishi Electric PAR-31MAA Ventilation operation Automatic cooling/heating operation Press button 1 ( ON/OFF ). Press button 7 ( F1 ) to display the operation mode «Auto». 1 2 F1 When the room temperature is higher than the preset temperature, cooling operation starts. When the room temperature is lower than the preset temperature, heating operation starts. * The current operation mode («Auto cool» or «Auto heat») will be displayed after the mode is determined. If «Di…

• 8, Troubleshooting When an error occurs, the following screen will appear. Check the error status, stop the operation, and consult your dealer. F1 F2 F3 F4 Error information Error code Error unit IU Ref. address Unt# Model name Serial No. ResetPage Error information Contact information Dealer Tel ResetPage Reset error: Reset button Reset error: Reset button Error code, error unit, refrigerant address, unit model name, and serial number will appear. The …

• 9, F1 F2 F3 F4 Main Main display: Cursor Page Main menu Vane·Louver·Vent. (Lossnay) High power Timer Weekly timer OU silent mode Timer, Weekly timer, Energy saving F1 F2 F3 F4 Main Main display: Cursor Page Main menu Restriction Energy saving Night setback Filter information Error information The settings for Timer, Weekly timer, and Energy saving operation can be made from the remote controller. Press button 4…

• 10, Maintenance Cool Room AutoSet temp. Mode Temp. Fan Fri will appear on the Main display in the Full mode when it is time to clean the filters. F1 F2 F3 F4 Main Main display: Cursor Page Main menu Restriction Energy saving Night setback Filter information Error information F1 F2 F3 F4 Main menu: Filter information Reset Please clean the filter. Press Reset button after filter cleaning. F1 F2 F3…

• 11, WT06694X01 This product is designed and intended for use in the residential, commercial, and light-industrial environment. The product at hand is based on the following EU regulations: • Low Voltage Directive 2006/95/EC • Electromagnetic Compatibility Directive 2004/108/EC HEAD OFFICE: TOKYO BLDG. , 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN Authorized representative in EU: MITSUBISHI ELECTRIC …