P0410 subaru impreza ошибка

Код ошибки P0410 системы вторичной подачи воздуха Subaru – это общий код ошибки, который встречается во многих моделях Subaru, код Р0410 можно встретить в моделях Liberty/Legacy GT, WRX/STi, Forester XT, Liberty 2.0R, Impreza 2.0R.

Обычно при этом горит лампочка двигателя, а лампа круиз-контроля мигает. Этот код ошибки обозначает неисправность системы вторичной подачи воздуха, вызванной неудачной попыткой запуска воздушного насоса.

Это может быть вызвано электрическим или механическим повреждением проводки, предохранителя, реле либо воздушного насоса.

Код ошибки P0410 может быть вызван, если происходит потеря давления в трубопроводах системы вторичной подачи воздуха. Такое возникает в случаях, когда один из трубопроводов либо перепускных клапанов повреждены, либо были смещены в результате недавней замены свечей.

Кто-то должен спросить  – «Что же является наиболее экономически эффективным средством для устранения ошибки P0410 Subaru?». В большинстве случав у Вас есть только одно эффективное решение, предотвращающее какие-либо ошибки системы вторичной подачи воздуха.

1. Свести к минимуму устранение неисправных компонентов, используя Subaru Secondary Air Eliminator.

Никаких модификаций ECU, либо замены прошивок, которые только маскируют проблему.

Secondary Air Eliminator

Associated Global Secondary Air Eliminator устраняет неисправности вторичного воздушного насоса/клапанов, и ошибки двигателя, связанные с ними.
Нет необходимости в замене заводской прошивки, либо удалении оборудования.

Исправляет  коды ошибок Subaru: P0410, P0411, P0413, P0414, P0416, P0417, P0418, P1410, P1418, P2431, P2432, P2433, P2440, P2441, P2442, P2443, P2444

“Не прячьте неисправность  – устраните её!”

Посетите:  http://www.associatedglobal.org для получения дополнительной информации.

https://www.facebook.com/associatedglobal?ref=bookmarks

P0410 is a generic OBDII trouble code.  This means that it has the same meaning for the Subaru Impreza as it would any other vehicle.  It is letting you know that there is an issue with the secondary air injection system.

P0410: Secondary Air Injection System → Malfunction 

The secondary air injection system injects air into the exhaust to help lower emissions.  Most of the time, P0410 is going to be caused by a failure in this pump or the one way check valve. But there can be other reasons the code is thrown as well.

P0410 Symptoms:  Subaru Impreza

Nearly all of the time, the only symptom of P0410 in the Impreza is going to be the service engine soon light.  Otherwise, you may hear the bad pump trying to work (like an empty wiper/washer, usually more faint sounding).  Vary rarely, it can cause some hesitation on acceleration.

Impreza P0410 Causes

Typically, there are three main components to the AIR system.  They are the pump, hoses, and one way check valve.  All of this is electronically controlled, so checking the fuse to it is a great place to start.

Here’s a good YouTube video from Mark Jenkins on diagnosing this code:

One Way Check Valve

The most common cause of P0410 is going to be the one way check valve failing.  When it does, it allows moisture into the pump.  This moisture can freeze in the winter time.

If frozen water does freeze up the air pump itself, it may blow the fuse to it.  This fuse is typically under the hood of the vehicle.  That’s a great place to start looking.   It only takes a second to see if a fuse has been blown.

AIR Pump

The AIR pump itself is the most common cause of P0410.  They are relatively affordable.  If they are no longer accepting instruction from the ECU, P0410 will be thrown.

Conclusion 

P0410 in the Subaru Impreza is not likely to cause the vehicle to break down, and rarely causes symptoms other than the check engine light.  That’s because the pump is part of the emissions system and not the engine itself.  Any time the check engine light comes on, it’s a good idea to service it as soon possible though.

If there is anything that you would like to add, please leave a comment below.  Good luck!

The Subaru error code P0410 Secondary Air Injection System fault code or DTC is a common code found across many Subaru models, this P0410 error is found in Liberty/Legacy GT, WRX/STi, Forester XT, Liberty 2.0R, Impreza 2.0R models.

The Engine Light will normally be illuminated with the cruise light flashing. This error code normally represents an Subaru Secondary Air System malfunction due to a run attempt failure of the Air pump.

This could be caused by an electrical or mechanical failure, wiring, fuse, relay or air pump.

In some cases the air piping pressure via the Subaru airpump could escape if one of the air pipes leading to the combination valves is damaged, dislodged however this is not so common.

One may ask what is the most cost effective means for fixing the Subaru error code P0410? in most cases you only have 1 effective solutions to prevent any ongoing errors with the Secondary Air Injection System.

Eliminate the faulty components out  the equation by the use of our Subaru Secondary Air Eliminator

Secondary Air Eliminator 
The Associated Global Secondary Air Eliminator fixes Secondary Air Injection/Pump/Valve failures including error lights and engine codes.
No reflashing and no removal of equipment necessary.
Fixes Subaru Error Codes: P0410, P0411, P0413, P0414, P0416, P0417, P0418, P1410, P1418, P2431, P2432, P2433, P2440, P2441, P2442, P2443, P2444
“Don’t Hide the Fault – Eliminate It!”
Visit: http://www.associatedglobal.org for more information.