Ошибка при запуске приложения 0x0000034

by Milan Stanojevic

Milan has been enthusiastic about technology ever since his childhood days, and this led him to take interest in all PC-related technologies. He’s a PC enthusiast and he… read more

Updated on August 18, 2023

Most of us often encounter the annoying Blue screens of death problems on our different versions of Windows.

You will see that the screen will simply turn blue or the system will completely fail to boot. 

What causes error 0xc0000034?

1. Bad sectors on Hard drive

All the critical system files will not be readable if you have bad sectors on your hard drive.

2. Corrupted Windows installation

You might have a corrupted installation of Windows as your OS crashed due to a malware or other reasons.

3. Missing boot files

Damaged BCD is a possible cause of the 0xc0000034 error. It occurs because your boot-related files are either corrupt, missing, misconfigured and damaged.

4. Compatibility Issues

Some of the users face the error because the recently changed hardware or software has compatibility issues with their PCs.

If you are a Windows 10 user you will see the following error message on your blue screen:

Recovery. Your PC needs to be repaired.
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034
You’ll need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
Press ESC for UEFI Firmware Settings.

How to get rid of  Windows 10 error code 0xc0000034?

1. Run Windows automatic repair
2. Manually repair the error
3. Refresh Your PC

---

1. Run Windows automatic repair

Windows provides an Automatic Repair tool that uses the Windows installation media (DVD, CD or USB drive) to fix the issue in a few steps. Here are some simple steps that you need to follow:

1. Insert the Windows 10 DVD or USB stick and restart your system.
2. Make sure to boot your system using the Windows installation media instead of your hard drive. You need to constantly press the specified key (F8 or F11 key depending upon your system) and choose the correct boot device.
3. You will be navigated through the startup menu, select Next > Repair your computer.
4. On the next screen select Troubleshoot and then click Automatic Repair.
5. You will see a list of operating systems, select the one you currently have. A repairing process will start to check your Windows for problems and fix them.
6. Wait patiently until the end of the process.

If the first solution fails to fix the error, try the next solution. 

---

2. Manually repair the error

This method requires a Windows 10 setup bootable media, so you can fix the error by following these steps.

1. First, plug in Windows 10 DVD or USB stick after starting your PC. The system will prompt you to select your keyboard and language settings.
2. Select the Repair your computer option.
3. On the next screen select Troubleshoot and then click Advanced Options.
4. You will now see a Command Prompt option.  Click on it.
5. As soon as you see a Command Prompt window, enter the following commands and press Enter key after entering each of them.
   • bootrec /fixMBR
   • bootrec /fixBoot
   • bootrec/scanos
   • bootrec /rebuildBCD
6. At this step add the installation to the boot list by typing A and pressing the Enter key.
7. Finally, exit the setup by closing the Command Prompt window and click the Continue button.
8. In the end, you will proceed to the Windows 10 home screen.

As you have finished the entire process the Windows 10 Error Code 0xc0000034 should be fixed and your system should boot normally. If the problem still persists try the next solution.

---

3. Refresh Your PC

When you are unable to repair your PC using any of the above-mentioned solutions you can use Windows Recovery Environment (WinRE) to perform Automatic repair.

Please follow the following steps to refresh your Windows 10 PC:

1. At the first step, you have to Reboot your PC.
2. Next, you need to hit the F8 or F11 key (depending upon your system) to open Advanced boot options.
3. On the next screen select Troubleshoot and then Refresh your PC. 
4. Follow the instructions to complete the process.

How can I avoid the error in the future?

You have to care about the health of your Windows OS if you want to avoid this error in future. You should avoid downloading any suspicious programs that can be potentially harmful to your system. In case your system gets infected with any malware, scan your PC with antivirus software.

Most importantly, regularly updating your PC is the best solution to keep your system bug-free. Microsoft regularly releases updates including bugs and fixes to protect your PC. Following these simple steps can protect your PC from unnecessary damage and future issues. 

RELATED ARTICLES YOU NEED TO CHECK OUT:

• How to reinstall Windows 10 apps on your PC
• Fix mbamswissarmy.sys boot errors using 3 easy solutions
• Fix: Stuck With Defaultuser0 User Account When Trying to Upgrade to Windows 10

Get the fix for the error 0xc0000034 on Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10.

About “0xc0000034“

The following information on this error has been compiled by NeoSmart Technologies, based on the information gathered and reported by our global network of engineers, developers, and technicians or partner organizations.

Description and Symptoms

The error messages, alerts, warnings, and symptoms below are tied to this error.

Symptom 1: “0xc0000034” error screen on startup

On Windows 7 systems, the error is usually displayed with a simpler error text:

!! 0xc0000034 !!

But this type of error screen is also common on Windows Vista and 7 systems:

The text reads:

Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. Choose your language settings, and then click "Next."
  3. Click "Repair your computer."
  
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.

  File: \Boot\BCD
  
  Status: 0xc0000034
  
  Info: The Windows Boot Configuration Data file does not contain a valid
        OS entry.

On Windows 8, Windows 8.1 and Windows 10 systems, the error code text would be this:

Recovery

Your PC needs to be repaired

The Boot Configuration Data file is missing some required information.

File: \BCD

Error code: 0xc0000034

You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.

Press ESC for UEFI Firmware settings.

You can prevent the 0xc0000034 error by installing KB 2533552 update.

Causes of this Error

This error has been known to occur as a result of one of the following causes:

Cause 1: Bootloader files are missing or corrupt

One of the most common causes of this error is the boot-related files that became either missing, corrupt, or misconfigured. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring these files manually.

Fixing “0xc0000034” on Windows

Windows Setup CD/DVD Required!
Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. If your PC did not come with a Windows installation disc or if you no longer have your Windows setup media, you can use Easy Recovery Essentials for Windows instead. EasyRE will automatically find and fix many problems, and can also be used to solve this problem with the directions below.

Fix 0xc0000034 with Easy Recovery Essentials

Easy Recovery Essentials is guaranteed to fix the “0xc0000034” error automatically using its built-in Automated Repair option. EasyRE is currently available for Windows XP, Vista, 7, 8, Windows 10, and Windows 11 and can be downloaded and created on any PC.

1. Download Easy Recovery Essentials. Make sure to note your Windows version (XP, Vista, 7, 8, 10, or Windows 11) before you download EasyRE. This guide can help you identify what version of Windows you have installed.
2. Burn the image. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! Alternatively, these instructions explain how to create a bootable EasyRE recovery USB stick/drive.
3. Boot up your PC from the Easy Recovery Essentials CD or USB you created.
4. Once EasyRE is running, choose the “Automated Repair” option and click Continue.

   

   Choose “Automated Repair” in Easy Recovery Essentials

5. After EasyRE scans your computer’s drives, identify and select the drive letter for your Windows installation from the list, and then click on the Automated Repair button to begin.

   

   Choose the drive associated with the Windows installation you’re trying to repair.

6. Easy Recovery Essentials will start analyzing the selected drive for problems. EasyRE will test for and attempt to automatically correct errors with the disk, partition, bootsector, filesystem, bootloader, and registry. No intervention is required, as EasyRE’s repair is fully automated:

   

   Easy Recovery Essentials searches for errors and makes corrections to the selected Windows installation.

7. Once the process is complete, EasyRE will report its findings. Click on the Restart button to reboot your PC and test the changes.
8. The “0xc0000034” error should now be fixed as your PC begins to load:

You can download Easy Recovery Essentials from here.

Fix 0xc0000034 in Windows Vista

Fix #1: Is SP1 Installed

If you installed SP1 for Windows 7, follow the instructions from the 0xc0000034 appears after I install Service Pack 1 chapter below.

If you don’t have SP1 installed or haven’t installed it recently, go to Fix #2 below.

Fix #2: Run chkdsk

To run chkdsk on your Windows Vista computer in an attempt to fix this boot error, follow these steps:

1. Reboot your computer with the original Windows Vista installation disc and boot from the disc

   If you don’t have your original Windows Vista installation disc, go to Fix 0xc0000034 with Easy Recovery Essentials

2. Click Repair your computer
3. Click Command Prompt
4. Type this command:

   chkdsk c: /r

   Replace c: with the letter of the drive where your Windows Vista is installed on.
   Press Enter

5. Restart the computer

Fix #3: Run Startup Repair

Follow the same steps from Fix #2: Run chkdsk until you boot into the Windows Vista installation disc:

1. Click Repair your computer
2. Click Startup Repair

Fix #4: Restore

If Startup Repair didn’t work to fix the 0xc0000034 error, you can also try to restore your Windows Vista to a date before the boot error appeared.

Follow the same steps from Fix #2: Run chkdsk until you boot into the Windows Vista installation disc:

1. Click Repair your computer
2. At the System Recovery Options screen, click System Restore

Fix 0xc0000034 in Windows 7

Fix #1: Is SP1 Installed

These steps apply only to Windows 7 systems who recently installed Service Pack 1 (SP1).

If you installed the SP1 for your Windows 7 system, follow the instructions from the 0xc0000034 appears after I install Service Pack 1 chapter below.

If you don’t have SP1 installed or haven’t installed it recently, go to Fix #2 below.

Fix #2: Run bootrec

You can run the bootrec utility to rebuild the BCD:

1. Boot from the Windows 7 DVD
2. Click Repair your computer or press R
3. At the System Recovery Options window, click Command Prompt
4. When Command Prompt loads, type this command:

   bootrec /rebuildbcd

5. Press Enter

Most Windows 7 systems have the System Recovery Options installed which can be accessed without the installation DVD:

1. Restart the computer
2. Press F8. You need to press the F8 key before the Windows 7 logo appears
3. Select Repair Your Computer
4. Press Enter

Fix #3: Startup Repair

If bootrec doesn’t work, you can try to run the Startup Repair utility:

1. Boot from the installation disc (CD or DVD) and click Repair your computer or press R
2. System Recovery Options should now be available
3. Click Startup Repair

Fix 0xc0000034 in Windows 8

Fix #1: Run Automatic Repair

Windows 8/8.1 comes buit-in with the Automatic Repair that will attempt to find and fix various errors that prevents your computer to load. On Windows Vista and 7 it was called Startup Repair.

To run Automatic Repair, follow these steps:

1. Insert the Windows 8 or Windows 8.1 DVD/USB and reboot your system

   If you don’t have your original Windows 8 installation media, go to Fix 0xc0000034 with Easy Recovery Essentials

2. Boot from the media
3. Click Repair your computer at the Install now screen
4. Select Troubleshoot
5. Select Automatic Repair
6. Follow the wizard instructions to complete the process

Fix #2: Run bootrec

If Automatic Repair didn’t fixed the 0xc0000034 error, try running bootrec to rebuild the BCD:

You need to have the original Windows 8/8.1 install media. If you don’t have it, go to Fix 0xc0000034 Easy Recovery Essentials

1. Restart your computer and boot from the DVD/USB
2. Click Repair your computer
3. Select Troubleshoot and then select Command Prompt
4. Type these commands in Command Prompt:

   bootrec /FixMbr
   bootrec /FixBoot
   bootrec /ScanOs
   bootrec /RebuildBcd

5. Once the last bootrec finished, type:

   exit

6. Press Enter
7. Restart your computer

Fix #3: Refresh

Performing a refresh of your Windows 8 or Windows 8.1 would not affect your personal files. To run the refresh operating, follow these steps:

1. Restart your computer
2. Press the F8 key or the F11 key
3. Click Troubleshoot
4. Click Refresh your PC
5. Follow the instructions to complete the process

Fix 0xc0000034 in Windows 10

Fix #1: Run Automatic Repair

Windows 10 comes buit-in with the Automatic Repair that will attempt to find and fix various errors that prevents your computer to load.

To run Automatic Repair, follow these steps:

1. Insert the Windows 10 DVD/USB and reboot your system

   If you don’t have your original Windows 10 installation media, go to Fix 0xc0000034 with Easy Recovery Essentials

2. Boot from the media
3. Click Repair your computer at the Install now screen
4. Select Troubleshoot
5. Select Automatic Repair
6. Follow the wizard instructions to complete the process

Fix #2: Run bootrec

If Automatic Repair didn’t fixed the 0xc0000034 error, try running bootrec to rebuild the BCD:

You need to have the original Windows 10 install media. If you don’t have it, go to Fix 0xc0000034 Easy Recovery Essentials

1. Restart your computer and boot from the DVD/USB
2. Click Repair your computer
3. Select Troubleshoot and then select Command Prompt
4. Type these commands in Command Prompt:

   bootrec /FixMbr
   bootrec /FixBoot
   bootrec /ScanOs
   bootrec /RebuildBcd

5. Once the last bootrec finished, type:

   exit

6. Press Enter
7. Restart your computer

Fix #3: Refresh

Performing a refresh of your Windows 10 would not affect your personal files. To run the refresh operating, follow these steps:

1. Restart your computer
2. Press the F8 key or the F11 key
3. Click Troubleshoot
4. Click Refresh your PC
5. Follow the instructions to complete the process

Troubleshooting

0xc0000034 appears after I install Service Pack 1

The 0xc0000034 error code can appear on Windows 7 or Server 2008 systems as a black screen error after installing Service Pack (SP1).

The usually error text is:

!! 0xc0000034 !! 142/53007 (_0000000000000000.cdf-ms)

Depending if you can boot into Windows, you have the following options available:

• Restart the computer using the original installation disc
• Run a VBS script from Command Prompt using the original installation disc
• Install the KB 2533552 update
• Reinstall the Windows Service Pack

If you can boot into Windows and the 0xc0000034 error isn’t preventing you from using your computer:

• Install KB 2533552
• Reinstall SP1

If you can’t boot into Windows, follow these 2 fixes:

Fix #1: Restore your computer

1. Restart your computer and press the F8 key to boot into the Advanced Boot Options
2. Select Repair your computer
3. Press Enter
4. Select a language, keyboard and click Next
5. Enter the Administrator password
6. Click OK
7. At the System Recovery Options screen, select System Restore
8. Click Next
9. Browse the available restore points and select the restore point titled as Windows 7 Service Pack 1.If there is no such restore point, select a restore point dated before the date when you installed Service Pack 1.
10. Click Next
11. Click Finish at the Confirm your restore point screen
12. Click Yes
13. Click Restart to restart the computer

Fix #2: Run a VBS script

This method is recommended for advanced users. Go to Fix 0xc0000034 with Easy Recovery Essentials for a quick and easy way to fix this error.

1. Save the following text as Script.vbs on a USB flash drive:

   Dim xmlDoc, node, nodeList, fileName, backupFileName, numberOfPOQNodes
   
   Set xmlDoc = CreateObject("Microsoft.XMLDOM")
   
   If Wscript.Arguments.Count = 0 Then 
   
   WScript.echo("Error! No XML file specified.")
   
   Wscript.quit
   
   End If
   
   fileName = WScript.Arguments(0)
   
   backupFileName = Left(fileName, InStrRev(fileName, ".") - 1) & "_backup.xml"
   
   If Not xmlDoc.load(fileName) Then
   
   WScript.echo("Failure loading XML file " & fileName & ".")
   
   Wscript.quit
   
   End If
   
   xmlDoc.save(backupFileName)
   
   Set nodeList = xmlDoc.documentElement.selectNodes("POQ")
   
   numberOfPOQNodes = nodeList.Length
   
   For Each node in nodeList
   
   xmlDoc.documentElement.removeChild(node)
   
   Next
   
   xmlDoc.save(fileName)
   
   Set xmlDoc = Nothing
   
   WScript.echo(numberOfPOQNodes & " POQ nodes removed. Script completed.")

2. Restart the computer
3. Press F8
4. Boot into the Advanced Boot Options menu and select Repair your computer
5. Press Enter
6. Select a language and keyboard and enter the Administrator password, if prompted
7. Insert the USB flash drive with the Script.vs file
8. Select Command Prompt, at the System Recovery Options screen
9. Navigate to the USB flash drive by typing the letter of the drive:

   F:

   F: is the USB flash drive

10. Then type this command:

    Cscript Script.vbs C:\Windows\winsxs\pending.xml

    Replace C: with the letter of the drive where your Windows 7 is installed.

11. Press Enter
12. You should see a confirmation message:

    2 POQ nodes removed. Script Completed

13. Type exit
14. Press Enter
15. Restart your computer

More Information

Linked Entries

• bootrec
• chkdsk

Support Links

• Easy Recovery Essentials for Windows – our repair and recovery disk.

  It’s an easy-to-use and automated diagnostics disk. It’s available for Windows 8, Windows 7 and Windows Vista. It’s also available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, member-to-member technical support and troubleshooting.
• Get a discounted price on replacement setup and installation discs: Windows Vista, Windows 7, Windows 8, Windows 10.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows 8 (all editions)
• Windows 8.1 (all editions)
• Windows 10 (all editions)

Propose an edit