Ошибка при создании тома недостаточно места на диске

How do you solve the issue when there is not enough space available on the disk(s) to complete this operation? How to solve this issue? This post discusses this issue from 4 aspects and recommends an all-in-one partition magic to all of you.

As we know, Windows 10/8/7 or Windows Vista users can turn to disk management tool instead of third-party partition software to create partition, extend partition, or shrink partition. However, this tool has great limitations, and many users report that they failed to manage partitions with it.

Let’s see a true story:

I deleted a partition of 97.66GB which was drive D. Instead of going into unallocated space, it became free space and my drive E (151.59GB) becomes D. When I tried to create a simple volume, it gives an error that «there is not enough space available on the disk(s) to complete this operation».

Now, in this situation, what should we do? Do you know how to remove this error?

Here, if you are among the ones who are given a warning message like this, please don’t feel panic. You can find answers in this post.

Next, let’s analyze the details.

Part 1. Not Enough Space Available on The Disk to Create Partition

Sometimes, if you plan to create a new partition on free space by using Windows built-in disk management tool, you could receive this warning:

“There is not enough space available on the disk(s) to complete this operation.”

Reasons for this Error

In fact, when creating new partition on free space with disk management you may receive the «not enough space available on the disk» error. It is mainly because of the limitation of Extended Partition and disk management tool. This Extended boot record post will show you more information about extended partition.

Solutions for Not Enough Space Available on the Disk

In this case, you have 2 options.

Option 1: You can delete this free space to get unallocated space, and then crate a new one on this unallocated space with disk management.

Option 2: You can try using a piece of professional yet free partitioning management software to remove this error and then reuse the free space again. MiniTool Partition Wizard is recommended here since it offers complete functions and simple operations.

If you have doubts about this professional freeware, download it and try it out.

Now, let’s see the detailed steps.

First run Free MiniTool Partition Wizard to get its starting interface and choose «Launch Application» to get its main interface. (Tip: the «Launch Application» option appears in the free version only.)

Second, select or right-click the free space you want to use and activate Create Partition function.

Then, set parameters for new partition, and press «OK» to move on.

Finally, click «Apply» in tool bar to confirm changes.

Video Watch

I used this tool in the following video to solve the above error when creating partition.

Click to Tweet

Part 2. Not Enough Space Available on The Disk to Shrink Volume

When you try to shrink a volume with disk management, you may get the following error:

«There is not enough space available on the disk(s) to complete this operation.»

Or, disk management only shows a little space that allows you to shrink when there is actually a lot of free space.

Reasons for this Error

Some applications might have made some changes to your partitions at the instant that you open disk management tool, thus making the status shown in disk management different from what it really is.

As a result, you will receive the error while extending partition. Additionally, if the volume contains unmovable files that are located in the middle of the hard disk, you won’t be able to shrink it. If there are page files or other unmovable/locked system files at the end of the volume, it might also cause the error.

For more information, please read our previous post Why Windows 7 Can’t Reduce Partition Size and How to Solve It.

Solutions for Not Enough Space Available on the Disk

Method 1: Rescan disks

In most of the cases, you can simply right click on disk management and select Rescan Disks under Action tab to fix this problem. After the partitions and volumes are reloaded, you will be able to shrink the volume.

However, rescan disks does not work in all cases! If you still cannot shrink volume, you can try using the following method. Want to know the best solution?

Method 2: Use professional partition management freeware

MiniTool Partition Wizard, a piece of professional freeware works on Windows XP/Vista/7/8/10, can easily and quickly shrink partition. Launch this freeware.

Then, select the needed partition you want to operate and choose «Move/Resize Partition» from the left action panel or «Move/Resize» from tool bar.

Now, shorten the length of partition handle to shrink partition. After getting desired partition size, click «OK» to go back to the main interface.

Note: In Move/Resize Partition interface you can see the option «Using Enhanced Data Protecting Mode» which is checked by default. Please keep it checked since it gives the strongest protections to your data.

Finally, click «Apply» button to perform all changes.

Thus, all work has been done.

Video Watch

I easily solved the «not enough space to shrink volume» issue.

Click to Tweet

Part 3. Not Enough Space Available on The Disk to Extend Volume

As time goes by, your partition may be in low disk space due to caches, temporary files, or other programs in Windows Server 2012, and you can use «Extend Volume» provided by disk management to increase its size.

However, you may run into the following error, even the additional space is shown in your disk management:

«There is not enough space available on the disk(s) to complete this operation.»

Well, it turns out that a lot of Server users have been troubled by this issue. Once this error happens, it is not possible to use disk management or diskpart.exe to extend volume. Nevertheless, we are going to show you how to fix this error.

To solve this, right click on disk management to Rescan Disks may help, but not helpful for each time. In this situation, can you still squeeze free space and extend the volume that is lacking free space?

The answer is yes!

MiniTool Partition Wizard, professional partitioning tool, can easily and effectively change partition size without affecting the original data.

The free edition of MiniTool Partition Wizard doesn’t support Windows Server OS. Right now, to fix this error, you need to choose server edition or advanced edition. Comparison of MiniTool Partition Software will help you find the right tool.

In the main interface of this software, select the target partition and then activate Move/Resize Partition or Extend Partition feature.

Here, we take «Extend Partition» for example since it can borrow free space from any other existing partitions or unallocated spaces on the same disk. Now, open the drop-down list of «Take Free Space from» and choose an existing partition or unallocated space to take free space. Then, drag the sliding handle leftwards or rightwards to decide how much free space to take, with partition size changing intuitively. Next, click “OK”.

Finally, click «Apply» button on the top left corner to apply the change.

Click to Tweet

Part 4. Not Enough Space Available on The Disk to Convert Basic Disk to Dynamic

Sometimes, because of the occupational requirement, you need to convert your basic disk to dynamic disk. The What Are Basic and Dynamic Disks? Features for Dynamic/Basic Disks post will show you more information about the 2 types of hard disk configurations.

Also, disk management tool can convert a basic disk to dynamic without data loss. Detailed steps are: right click the basic disk, choose «Convert to Dynamic Disk» from the popup menu, and then follow the instructions on your screen.

However, sometimes, when converting basic disk to dynamic, you may be troubled by the error:

This will appear if there is no enough free space that is not partitioned at the end of the disk to create the database for the dynamic disk. To fix the error, you need to shrink the last partition to create such a space via the feature «Shrink Volume».

What We Learned

After talking so much about the error «There is not enough space available on the disk(s) to complete this operation», I think you will agree with me when I say:

To manage hard disk partitions, you had better turn to third-party professional partitioning software instead of Windows built-in disk management tool. 

Well, it turns out that more and more users are starting to prefer using MiniTool Partition Wizard to manage their partitions. Next we will show you why this tool is better than Windows built-in tool.

Although disk management can manage partitions, it has great limitations. Its «Extend Volume» feature only works with unallocated space on the right side of the partition you like to extend.

Besides, if you turn to this tool to change your volume size (extending volume or shrinking volume), create new volume or do some other operations, you may get this not enough space available error message.

However, with MiniTool Partition Wizard, you can easily and effectively resize partition, create partition, delete partitions and more. Moreover, this tool also contains some other advanced features to help you perfectly manage partitions, including:

Migrate OS to SSD/HHD: can help you easily transfer OS to shorten the boot time and enhance the performance of computer. 

Partition Recovery: helps recover partition which is lost due to mistaken deletion, virus attack, wrong ghost, sudden power outage, incorrect partitioning, etc. 

Rebuild MBR: is designed to rebuild MBR in quite simple operations when Windows cannot boot. 

Convert MBR Disk to GPT Disk: can help you create up to 128 partitions on GPT disk, and break the 2TB limit in Master Boot Record (MBR). 

Copy Disk: is able to copy all partitions and data from one disk to another in several steps in case of accidents.

Bottom Line

In this post, we mainly talk about the error «there is not enough space available on the disk(s) to complete this operation», and why this error appears, and how to solve this error.

If you have any doubts or problems, please feel free to leave us your comments or directly send to [email protected]. We will try our best to help you get out of trouble. Much appreciated!

How do you solve the issue when there is not enough space available on the disk(s) to complete this operation? How to solve this issue? This post discusses this issue from 4 aspects and recommends an all-in-one partition magic to all of you.

As we know, Windows 10/8/7 or Windows Vista users can turn to disk management tool instead of third-party partition software to create partition, extend partition, or shrink partition. However, this tool has great limitations, and many users report that they failed to manage partitions with it.

Let’s see a true story:

I deleted a partition of 97.66GB which was drive D. Instead of going into unallocated space, it became free space and my drive E (151.59GB) becomes D. When I tried to create a simple volume, it gives an error that “there is not enough space available on the disk(s) to complete this operation”.

Now, in this situation, what should we do? Do you know how to remove this error?

Here, if you are among the ones who are given a warning message like this, please don’t feel panic. You can find answers in this post.

Next, let’s analyze the details.

Part 1. Not Enough Space Available on The Disk to Create Partition

Sometimes, if you plan to create a new partition on free space by using Windows built-in disk management tool, you could receive this warning:

“There is not enough space available on the disk(s) to complete this operation.”

Reasons for this Error

In fact, when creating new partition on free space with disk management you may receive the “not enough space available on the disk” error. It is mainly because of the limitation of Extended Partition and disk management tool. This Extended boot record post will show you more information about extended partition.

Solutions for Not Enough Space Available on the Disk

In this case, you have 2 options.

Option 1: You can delete this free space to get unallocated space, and then crate a new one on this unallocated space with disk management.

Option 2: You can try using a piece of professional yet free partitioning management software to remove this error and then reuse the free space again. MiniTool Partition Wizard is recommended here since it offers complete functions and simple operations.

If you have doubts about this professional freeware, download it and try it out.

Now, let’s see the detailed steps.

First run Free MiniTool Partition Wizard to get its starting interface and choose “Launch Application” to get its main interface. (Tip: the “Launch Application” option appears in the free version only.)

Second, select or right-click the free space you want to use and activate Create Partition function.

Then, set parameters for new partition, and press “OK” to move on.

Finally, click “Apply” in tool bar to confirm changes.

Video Watch

I used this tool in the following video to solve the above error when creating partition.

I get a new skill on how to effectively create new partition without receiving the not enough space available error, hope it can help you…… Click to tweet

Part 2. Not Enough Space Available on The Disk to Shrink Volume

When you try to shrink a volume with disk management, you may get the following error:

“There is not enough space available on the disk(s) to complete this operation.”

Or, disk management only shows a little space that allows you to shrink when there is actually a lot of free space.

Reasons for this Error

Some applications might have made some changes to your partitions at the instant that you open disk management tool, thus making the status shown in disk management different from what it really is.

As a result, you will receive the error while extending partition. Additionally, if the volume contains unmovable files that are located in the middle of the hard disk, you won’t be able to shrink it. If there are page files or other unmovable/locked system files at the end of the volume, it might also cause the error.

For more information, please read our previous post Why Windows 7 Can’t Reduce Partition Size and How to Solve It.

Solutions for Not Enough Space Available on the Disk

Method 1: Rescan disks

In most of the cases, you can simply right click on disk management and select Rescan Disks under Action tab to fix this problem. After the partitions and volumes are reloaded, you will be able to shrink the volume.

However, rescan disks does not work in all cases! If you still cannot shrink volume, you can try using the following method. Want to know the best solution?

Method 2: Use professional partition management freeware

MiniTool Partition Wizard, a piece of professional freeware works on Windows XP/Vista/7/8/10, can easily and quickly shrink partition. Launch this freeware.

Then, select the needed partition you want to operate and choose “Move/Resize Partition” from the left action panel or “Move/Resize” from tool bar.

Now, shorten the length of partition handle to shrink partition. After getting desired partition size, click “OK” to go back to the main interface.

Finally, click “Apply” button to perform all changes.

Thus, all work has been done.

Video Watch

I easily solved the “not enough space to shrink volume” issue.

To avoid the “not enough space available on the disk” error while shrinking partition, you can try MiniTool Partition Wizard. Click to tweet

Part 3. Not Enough Space Available on The Disk to Extend Volume

As time goes by, your partition may be in low disk space due to caches, temporary files, or other programs in Windows Server 2012, and you can use “Extend Volume” provided by disk management to increase its size.

However, you may run into the following error, even the additional space is shown in your disk management:

“There is not enough space available on the disk(s) to complete this operation.”

Well, it turns out that a lot of Server users have been troubled by this issue. Once this error happens, it is not possible to use disk management or diskpart.exe to extend volume. Nevertheless, we are going to show you how to fix this error.

To solve this, right click on disk management to Rescan Disks may help, but not helpful for each time. In this situation, can you still squeeze free space and extend the volume that is lacking free space?

The answer is yes!

MiniTool Partition Wizard, professional partitioning tool, can easily and effectively change partition size without affecting the original data.

The free edition of MiniTool Partition Wizard doesn’t support Windows Server OS. Right now, to fix this error, you need to choose server edition or advanced edition. Comparison of MiniTool Partition Software will help you find the right tool.

In the main interface of this software, select the target partition and then activate Move/Resize Partition or Extend Partition feature.

Here, we take “Extend Partition” for example since it can borrow free space from any other existing partitions or unallocated spaces on the same disk. Now, open the drop-down list of “Take Free Space from” and choose an existing partition or unallocated space to take free space. Then, drag the sliding handle leftwards or rightwards to decide how much free space to take, with partition size changing intuitively. Next, click “OK”.

Finally, click “Apply” button on the top left corner to apply the change.

Click to Tweet

Part 4. Not Enough Space Available on The Disk to Convert Basic Disk to Dynamic

Sometimes, because of the occupational requirement, you need to convert your basic disk to dynamic disk. The What Are Basic and Dynamic Disks? Features for Dynamic/Basic Disks post will show you more information about the 2 types of hard disk configurations.

Also, disk management tool can convert a basic disk to dynamic without data loss. Detailed steps are: right click the basic disk, choose “Convert to Dynamic Disk” from the popup menu, and then follow the instructions on your screen.

However, sometimes, when converting basic disk to dynamic, you may be troubled by the error:

This will appear if there is no enough free space that is not partitioned at the end of the disk to create the database for the dynamic disk. To fix the error, you need to shrink the last partition to create such a space via the feature “Shrink Volume”.

What We Learned

After talking so much about the error “There is not enough space available on the disk(s) to complete this operation”, I think you will agree with me when I say:

To manage hard disk partitions, you had better turn to third-party professional partitioning software instead of Windows built-in disk management tool. 

Well, it turns out that more and more users are starting to prefer using MiniTool Partition Wizard to manage their partitions. Next we will show you why this tool is better than Windows built-in tool.

Although disk management can manage partitions, it has great limitations. Its “Extend Volume” feature only works with unallocated space on the right side of the partition you like to extend.

Besides, if you turn to this tool to change your volume size (extending volume or shrinking volume), create new volume or do some other operations, you may get this not enough space available error message.

However, with MiniTool Partition Wizard, you can easily and effectively resize partition, create partition, delete partitions and more. Moreover, this tool also contains some other advanced features to help you perfectly manage partitions, including:

Migrate OS to SSD/HHD: can help you easily transfer OS to shorten the boot time and enhance the performance of computer. 

Partition Recovery: helps recover partition which is lost due to mistaken deletion, virus attack, wrong ghost, sudden power outage, incorrect partitioning, etc. 

Rebuild MBR: is designed to rebuild MBR in quite simple operations when Windows cannot boot. 

Convert MBR Disk to GPT Disk: can help you create up to 128 partitions on GPT disk, and break the 2TB limit in Master Boot Record (MBR). 

Copy Disk: is able to copy all partitions and data from one disk to another in several steps in case of accidents.

Bottom Line

In this post, we mainly talk about the error “there is not enough space available on the disk(s) to complete this operation”, and why this error appears, and how to solve this error.

If you have any doubts or problems, please feel free to leave us your comments or directly send to [email protected]. We will try our best to help you get out of trouble. Much appreciated!

Для работы с дисками и разделами в Windows предусмотрен простой, но не отличающийся особой функциональностью инструмент «Управление дисками», при работе с которым к тому же время от времени приходится сталкиваться с разного рода ограничениями и ошибками. Сегодня мы рассмотрим одну из таких ошибок, а именно «На диске недостаточно свободного места для выполнения этой операции».

Чаще всего ошибка возникает при создании, сжатии или расширении разделов, хотя в действительности столкнуться с ней можно во время выполнения любой операции в оснастке управления дисками. И это при том, что на диске может быть сколько угодно свободного места. Но если это так, что приводит к появлению этой неполадки? Судя по всему, проблема связана с некорректным определением дисковых ресурсов самой оснасткой, и чтобы заставить ее работать, иногда бывает достаточно перезагрузить компьютер.

Впрочем, можно обойтись и без перезагрузки. Столкнувшись с ошибкой «На диске недостаточно свободного места для выполнения этой операции», тут же в управлении дисками выберите в меню «Действие» опцию «Повторить проверку дисков».

Если это не решит проблему в оснастке управления дисками, ну что же, отложите ее в сторону и переключите внимание на Diskpart – не столь удобный, но зато более функциональный штатный инструмент для работы с дисками и разделами в Windows. Diskpart является консольной утилитой, все операции в ней выполняются в текстовом режиме путем ввода команд, ознакомиться с синтаксисом и параметрами которых вы можете, выполнив в командной строке или PowerShell команду diskpart /? или diskpart -help. Работа с Diskpart – это большая отдельная тема, разбирать ее мы не будем, приведем лишь один пример, в котором на месте нераспределенного пространства создается новый раздел. 

Открыв от имени администратора командную строку или PowerShell, выполняем следующие команды:

1. diskpart – команда запускает утилиту Diskpart.

2. list disk – этой командой выводится список всех доступных физических дисков.

3. select disk № – выбирается физический диск, на котором будет создаваться раздел.

4. create partition primary – команда создает первичный (основной) раздел в обнаруженной нераспределенной области. 

5. format fs=ntfs quick – эта команда выполняет быстрое форматирование созданного раздела в файловую систему NTFS.

6. assign letter=X – присваивает отформатированному разделу букву.

7. exit – завершает работу Diskpart.

Альтернативным решением может стать использование сторонних программ – менеджеров разделов. Существует их немало, как платных, так и бесплатных, удобных и не очень. Если вы решите сделать выбор в пользу бесплатного ПО, учитывайте, что его функционал может оказаться ограниченным, например, вы не сможете обрезать разделы слева, выполнять клонирование томов и так далее. Наиболее популярными менеджерами разделов являются: 

● Paragon Partition Manager Free;

● MiniTool Partition Wizard Free;

● EaseUS Partition Master Free;

● AOMEI Partition Assistant;

● MiniTool Partition Wizard Free;

● Acronis Disk Director.

Перечисленные выше программные продукты имеют удобный и интуитивно понятный интерфейс, работа с ними не должна вызвать трудностей даже у начинающих пользователей. Останавливаться на примерах использования менеджеров разделов опять же не будем, отметим лишь, что все операции в них выполняются через контекстные меню визуализированных в графическом интерфейсе дисков и томов.

В тех случаях, когда ошибка «На диске недостаточно свободного места для выполнения этой операции» вызвана активностью встроенных или сторонних программ, для выполнения нужных действий можно воспользоваться LiveCD – загрузочными дисками на базе Linux или WinPE с соответствующим набором ПО на борту. Например, WinPE 11-10-8 Sergei Strelec, которому на нашем сайте посвящено немало статей. 

Загрузив компьютер с такого диска (его предварительно нужно записать на флешку), вы получаете возможность выполнять операции с дисками в режиме монопольного доступа, что существенно снижает вероятность появления рассмотренной нами ошибки. Программы для работы с томами диска найдете в меню Пуск, перейдя в раздел Программы WinPE → Жесткий диск. выбирайте ту, с которой знакомы, мы рекомендуем Acronis Disk Director – он простой, удобный и функциональный. 

Теоретически, проблемы при работе с дисками в WinPE Sergei Strelec могут возникнуть вследствие ограничений NTFS, хотя такой сценарий маловероятен. Если все же произойдет нечто подобное, вместо LiveCD от Стрельца попробуйте воспользоваться диском GParted Live – таким же LiveCD, только на базе операционной системы Linux, которая нечувствительна к ограничениям файловой системы NTFS.