Ошибка при преобразовании типа данных varchar к float - Решение и исправление самых разных ошибок на TopOshibok.ru

Вам надо сделать преобразование типа в запросе + ,как сказал @alexlz, у Вас, возможно, не совпадают локали и формируемые в запрос числа идут скажем с запятой вместо точки:

sqlString = "INSERT INTO [Table] ( name, [datetime], f1, f2, stat, data) VALUES ( '{0}', '{1}', '{2}', cast('{3}' as float), cast('{4}' as float), '{5}' );";
sqlString = String.Format(sqlString, name, dt, single1, single2, stat, data.ToString());
sqlCommand = new SqlCommand(sqlString, sqlConnect);
sqlCommand.ExecuteNonQuery();

если это тоже упадёт с ексепшеном, то надо играться с локалью. Так же попробуйте числа без кавычек в запрос впихнуть.

А какой текст запроса у вас для параметрического вызова?

Попробуйте для перевода числа в строку использовать такой код:

var strNumber = number.ToString(CultureInfo.InvariantCulture);

Источник

Sometimes, under certain circumstances, when you develop in SQL Server and especially when you try to convert a string data type value to a float data type value, you might get the error message: error converting data type varchar to float. As the error message describes, there is a conversion error and this is most probably due to the input parameter value you used in the conversion function.

Read more below on how you can easily resolve this problem.

Reproducing the Data Type Conversion Error

As mentioned above, the actual reason you get this error message, is that you are passing as a parameter to the CAST or CONVERT SQL Server functions, a value (varchar expression) that is invalid and cannot be converted to the desired data type.

Consider the following example:

-----------------------------------------
--Variable declaration and initialization
-----------------------------------------
DECLARE @value AS VARCHAR(50);

SET @value = '12.340.111,91';

--Perform the casting
SELECT CAST(@value AS FLOAT);

--or
--Perform the conversion
SELECT CONVERT(FLOAT, @value);
-----------------------------------------

If you execute the above code you will get an error message in the following type:

Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to float.

Another similar example where you get the same data type conversion error, is the below:

-----------------------------------------
--Variable declaration and initialization
-----------------------------------------
DECLARE @value2 AS VARCHAR(50);

SET @value2 = '12,340.15';

--Perform the casting
SELECT CAST(@value2 AS FLOAT);

--or
--Perform the conversion
SELECT CONVERT(FLOAT, @value2);

Why you get this Conversion Error

The exact reason for getting the error message in this case is that you are using the comma (,) as a decimal point and also the dots as group digit symbols. Though SQL Server considers as a decimal point the dot (.). Also when converting a varchar to float you must not use any digit grouping symbols.

Strengthen your SQL Server Administration Skills – Enroll to our Online Course!

Check our online course on Udemy titled “Essential SQL Server Administration Tips”
(special limited-time discount included in link).

Via the course, you will learn essential hands-on SQL Server Administration tips on SQL Server maintenance, security, performance, integration, error handling and more. Many live demonstrations and downloadable resources included!

(Lifetime Access/ Live Demos / Downloadable Resources and more!)
Enroll from $12.99

How to Resolve the Conversion Issue

In order for the above code to execute, you would need to first remove the dots (that is the digit grouping symbols in this case) and then replace the comma with a dot thus properly defining the decimal symbol for the varchar expression.

Note: You need to be careful at this point, in order to correctly specify the decimal symbol at the correct position of the number.

Therefore, you can modify the code of example 1 as per below example:

-------------------------------------------
--Variable declaration and initialization
-------------------------------------------
DECLARE @value AS VARCHAR(50);

SET @value = '12.340.111,91';

--Prepare the string for casting/conversion to float
SET @value = REPLACE(@value, '.', '');
SET @value = REPLACE(@value, ',', '.');

--Perform the casting
SELECT CAST(@value AS FLOAT);

--or
--Perform the conversion
SELECT CONVERT(FLOAT, @value);
-----------------------------------------

If you execute the above code you will be able to get the string successfully converted to float.

Similarly, you can modify the code of example 2 as per below example:

-----------------------------------------
--Variable declaration and initialization
-----------------------------------------
DECLARE @value2 AS VARCHAR(50);

SET @value2 = '12,340.15';

--Prepare the string for casting/conversion to float
SET @value2 = REPLACE(@value2, ',', '');

--Perform the casting
SELECT CAST(@value2 AS FLOAT);

--or
--Perform the conversion
SELECT CONVERT(FLOAT, @value2);

Again, if you execute the above code you will be able to get the string successfully converted to float.

*Note: Even though you can try changing the regional settings of the PC for setting the dot (.) as the decimal symbol, this will only affect the way the data is presented to you when returned from the casting/conversion call. Therefore, you still have to modify the varchar expression prior to the casting/conversion operation.

Regarding the message: error converting data type varchar to numeric

The above error message is similar to the one we examined in this article, therefore, the way for resolving the issue is similar to the one we described in the article. The only different for the numeric case, is that you will have to replace FLOAT with numeric[ (p[ ,s] )]. Learn more about the numeric data type in SQL Server and how to resolve the above conversion issue, by reading the relevant article on SQLNetHub.

Watch the Live Demonstration on the VARCHAR to FLOAT Data Type Conversion Error

Learn essential SQL Server development tips! Enroll to our Online Course!

Check our online course titled “Essential SQL Server Development Tips for SQL Developers”
(special limited-time discount included in link).

Sharpen your SQL Server database programming skills via a large set of tips on T-SQL and database development techniques. The course, among other, features over than 30 live demonstrations!

(Lifetime Access, Certificate of Completion, downloadable resources and more!)
Enroll from $12.99

Featured Online Courses:

SQL Server 2022: What’s New – New and Enhanced Features
Introduction to Azure Database for MySQL
Working with Python on Windows and SQL Server Databases
Boost SQL Server Database Performance with In-Memory OLTP
Introduction to Azure SQL Database for Beginners
Essential SQL Server Administration Tips
SQL Server Fundamentals – SQL Database for Beginners
Essential SQL Server Development Tips for SQL Developers
Introduction to Computer Programming for Beginners
.NET Programming for Beginners – Windows Forms with C#
SQL Server 2019: What’s New – New and Enhanced Features
Entity Framework: Getting Started – Complete Beginners Guide
A Guide on How to Start and Monetize a Successful Blog
Data Management for Beginners – Main Principles

Recommended Software Tools

Snippets Generator: Create and modify T-SQL snippets for use in SQL Management Studio, fast, easy and efficiently.

Learn more

Dynamic SQL Generator: Convert static T-SQL code to dynamic and vice versa, easily and fast.

Learn more

Get Started with Programming Fast and Easy – Enroll to the Online Course!

Check our online course “Introduction to Computer Programming for Beginners”
(special limited-time discount included in link).

(Lifetime Access, Q&A, Certificate of Completion, downloadable resources and more!)
Learn the philosophy and main principles of Computer Programming and get introduced to C, C++, C#, Python, Java and SQL.

Enroll from $12.99

Subscribe to our newsletter and stay up to date!

Subscribe to our YouTube channel (SQLNetHub TV)

Easily generate snippets with Snippets Generator!

Secure your databases using DBA Security Advisor!

Generate dynamic T-SQL scripts with Dynamic SQL Generator!

Check our latest software releases!

Check our eBooks!

Rate this article: 1 Star 2 Stars 3 Stars 4 Stars 5 Stars (17 votes, average: 5.00 out of 5)

Loading…

Reference: SQLNetHub.com (https://www.sqlnethub.com)

How to resolve the error: Error converting data type varchar to float

Click to Tweet

Artemakis Artemiou is a Senior SQL Server Architect, Author, a 9 Times Microsoft Data Platform MVP (2009-2018). He has over 20 years of experience in the IT industry in various roles. Artemakis is the founder of SQLNetHub and {essentialDevTips.com}. Artemakis is the creator of the well-known software tools Snippets Generator and DBA Security Advisor. Also, he is the author of many eBooks on SQL Server. Artemakis currently serves as the President of the Cyprus .NET User Group (CDNUG) and the International .NET Association Country Leader for Cyprus (INETA). Moreover, Artemakis teaches on Udemy, you can check his courses here.

Источник

CASE
WHEN (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))> 0 AND (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))<=0.25 THEN (0.25+FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))

WHEN (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))> 0.25 AND (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))<=0.50 THEN (0.50+FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))

WHEN (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))> 0.50 AND (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))<=0.75 THEN (0.75+FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))

WHEN (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))> 0.75 AND (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))<1 THEN (1+FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))


WHEN (Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)- FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))= 0 THEN (0+FLOOR(Cast(CONVERT(DECIMAL(10,2),(totaleffort/7.40)) as nvarchar)))

END

AS Estimated_Effort_Days,

The above code is currently rounding up a field called totaleffort to the nearest.25, for example if i have a value of 78.19 it will round up to 78.25.

I have a new requirement for the value of zero, when the value = 0 then i need to display the text ‘unknown number’ I have attempted to add an additional case statement however the query fails to run with an error :

Error converting data type varchar to float.

Does anyone have a reccomendation for me

Источник

Remove From My Forums

Question
I have this query:

SELECT
A.[ID EMPLEADO],A.EMPLEADO,
LTRIM(A.EMPRESA) AS EMPRESA,
CASE A.EMPRESA
WHEN ‘OHSC’ THEN ‘OHSC’
ELSE ‘OH’
END AS OH,
A.[CLAVE PUESTO PS],A.[PUESTO PS],
CONVERT(DECIMAL,A.[CLAVE CLIENTE]) AS [CLAVE CLIENTE],AN.CLIENTE,A.[CLAVE CC],A.CC,
A.FECHA_INGRESO,MONTH(A.FECHA_INGRESO) AS MES,YEAR(A.FECHA_INGRESO) AS AÑO,
AN.SUCURSAL,AN.[GERENCIA REGIONAL],
ISNULL(AN.CORPORATIVO,A.CLIENTE) AS CORPORATIVO,
AN.[PARQUE INDUSTRIAL],AN.GIRO,
GENERO,dbo.fn_RangoEdad(FECHA_NACIMIENTO) AS [RANGO EDAD]
FROM ALTAS A
LEFT JOIN AgrupadoresNomina AN ON A.[CLAVE CLIENTE]=AN.[CLAVE CLIENTE]
EXCEPT
SELECT * FROM vBajas_Cancelacion_PS

That query was working fine, but recently has started to give me the following message:

Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to float.

I’ve tried running the first SELECT, and everything is OK, running the second SELECT and everything is OK.

Also i’ve tried changing the EXCEPT sentence for NOT IN or EXIST (in this case it only shows me 34086 records, then gives me same error), removing the CONVERT from the query, but the result is the same, it gives me the «Error converting data type varchar
to float» message.

Can someone help me to get more ideas to find the record or why is now showing me this message?

Thanks in advance!

Answers

You are seeing that message because in one of those selects there is a float column and the corresponding column in the other select is a varchar. So when yoou run one select, you get a float result so there is no problem. When you run the other
select, you get a varchar result, so that is also no problem. But when you run them together with the EXCEPT, SQL must convert them to the same type in order to do the compare. Since float has a higher priority than varchar, SQL tries to convert
the value in the varchar column to a float. So for at least one row, you have a value in that varchar column which cannot be converted.

If you are on SQL 2012 or later, the best way to find the row(s) causing this error is to run (in the code below, replace <column name> with the name of the varchar column.
```
Select <column name>
From ...
Where Try_Convert(float, <column name>) Is Null And <column name> Is Not Null;
```
If you are on SQL 2008R2 or earlier, you cannot use Try_Convert, but you can do
```
Select <column name>
From ...
Where IsNumeric(<column name>) = 0;
```
That’s not quite as helpful as Try_Convert. If will probably find the row(s) but it might not depending exactly what is in the varchar column.

In addition to selecting the column name, you might also want to select any additional data needed to find the row with the bad data (such as the primary key columns).

Tom
- Marked as answer by
  
  Wednesday, February 20, 2013 3:48 AM

Does the column datatypes from both SELECT statements are compatible ?

As a test, try inserting the first SELECT statement results into a temp table and then check the data types of all those columns whether compatible with t all column data types of the table/view —

vBajas_Cancelacion_PS (second SELECT statement)

SELECT
A.[ID EMPLEADO],A.EMPLEADO,
LTRIM(A.EMPRESA) AS EMPRESA,
CASE A.EMPRESA
    WHEN 'OHSC' THEN 'OHSC'
    ELSE 'OH'
END AS OH,
A.[CLAVE PUESTO PS],A.[PUESTO PS],
CONVERT(DECIMAL,A.[CLAVE CLIENTE]) AS [CLAVE CLIENTE],AN.CLIENTE,A.[CLAVE CC],A.CC,
A.FECHA_INGRESO,MONTH(A.FECHA_INGRESO) AS MES,YEAR(A.FECHA_INGRESO) AS AÑO,
AN.SUCURSAL,AN.[GERENCIA REGIONAL],
ISNULL(AN.CORPORATIVO,A.CLIENTE) AS CORPORATIVO,
AN.[PARQUE INDUSTRIAL],AN.GIRO,
GENERO,dbo.fn_RangoEdad(FECHA_NACIMIENTO) AS [RANGO EDAD]
INTO FirstSelectResults -- Added this
FROM ALTAS A
LEFT JOIN AgrupadoresNomina AN ON A.[CLAVE CLIENTE]=AN.[CLAVE CLIENTE]

SP_HELP FirstSelectResults

Narsimha

Marked as answer by
AlejandroVR
Wednesday, February 20, 2013 3:49 AM

Источник

Published: 03 Jan 2017
Last Modified Date: 24 Aug 2022

Issue

When you try to extract a SQL Server data source, one of the following errors might occur:

An error occurred while communicating with data source <Data Source Name>.
SQL Server database error 0x80040E07: Error converting data type varchar to float.
[Microsoft][SQL Server Native Client 11.0][SQL Server] Error converting data type varchar to float
Unable to create extract

Environment

Tableau Desktop
Microsoft SQL Server

Resolution

Use one of the following options, as appropriate to your data:

Create a calculated field to strip currency symbols and commas from your data before converting it.
Ensure that characters such as the plus (+) sign, minus (-) sign and decimal point (.) are positioned in a valid number format. For example, plus and minus signs can only be used to the left of a number (For example, -2).
If your string data values are currency, you can use rawSQL to cast the string to SQL Server’s MONEY data type before casting to a number. For example:

RAWSQL_REAL("CASE WHEN ISNUMERIC(%1) = 1 THEN CAST(CAST(%1 AS MONEY) AS FLOAT) END", [<Your_String_Field>])

Cause

This error occurs because SQL Server is unable to convert string values to a numeric value if the string contains the following:

Currency symbol such as $, £, or ¥. For example, «$123».
Commas. For example, «100,000».
A single character of: currency symbol, comma(,), decimal point (.), plus (+) sign, or minus (-) sign. For example, «$».
More than one period. For example, «1.1.0».
Incorrectly positioned plus (+) or minus (-) signs. For example, «2-«.

Источник

Reproducing the Data Type Conversion Error

Why you get this Conversion Error

How to Resolve the Conversion Issue

Regarding the message: error converting data type varchar to numeric

Watch the Live Demonstration on the VARCHAR to FLOAT Data Type Conversion Error

Learn essential SQL Server development tips! Enroll to our Online Course!

Featured Online Courses:

Read Also:

Recommended Software Tools

Get Started with Programming Fast and Easy – Enroll to the Online Course!

Question

Answers

Issue

Environment

Resolution

Cause