Ошибка f1 bandit 1250

Suzuki Bandit 1250 motorcycles have engines, which are made up of many different parts.
These parts must work together in order for the engine to function. A problem with one of the
parts can make the engine not run. There are many different parts that make up an engine.
The following suzuki bandit 1250 faults are the list of some of the parts of a motorcycle engine.

Checking the fault code is one of the most overlooked aspects of maintaining Suzuki Bandit 1250 motorcycle. Many people don’t think about it until something goes wrong. A clogged afuel pump. Now that you know how to stay visible on your bike, and how to stay safe on your Suzuki Bandit 1250 bike, it’s important that you know what you need. When you’re on a bike, the weather is often a factor. Here are a few tips that will help you protect yourself the next time you take your motorcycle out on the road.

Suzuki Bandit 1250 Faults :

Another drawback that may occur along with your bike engine could be a blown gasket. this will cause your engine to overheat and presumably crack the cylinder heads. during this case, it’s best to require your Suzuki Bandit 1250 bike to an expert mechanic to possess it verified. Another common drawback is with the carburettor. The carburettor is that the a part of your bike that mixes air and fuel to make the combustion required to power the engine.

Prior to diagnosis using the mode selection switch or SDS, perform the following visual inspections. The reason for
visual inspection is that mechanical failures (such as oil leakage) cannot be displayed on the screen with the use of
mode selection switch or SDS.

  • Engine oil level and leakage.
  • Engine coolant level and leakage.
  • Fuel level and leakage.
  • Clogged air cleaner element.
  • Battery condition.
  • Throttle cable play.
  • Vacuum hose looseness, bend and disconnection.
  • Broken fuse.
  • Fl indicator light operation.
  • Each warning indicator light operation.
  • Combination meter operation.
  • Exhaust gas leakage and noise.
  • Each coupler disconnection.
  • Clogged radiator fins.
Malfunction
Code		 Detected Item Detected Failure Condition Check For
COO NO FAULT — —
C11 CMP sensor The signal does not reach ECM for 3 sec. or more, after receiving the starter signal. CMP sensor wiring and mechanical parts
CMP sensor, intake cam pin, wiring/coupler connection
P0340
C12 CKP sensor The signal does not reach ECM for 3 sec. or more, after receiving the starter signal. CKP sensor wiring and mechanical parts
CKP sensor, lead wire/coupler connection
P0335
C13 IAP sensor The sensor should produce following voltage. 0.5 V 5 Sensor voltage < 4.85 V
In other than the above range, C13 (P0105) is indicated.		 IAP sensor, lead wire/coupler connection
P0105 21 Sensor voltage is higher than specified value. IAP sensor circuit shorted to VCC or ground circuit open
L Sensor voltage is lower than specified value. IAP sensor circuit open or shorted to ground or VCC circuit open
C14 TP sensor The sensor should produce following voltage. 0.2 V 5 Sensor voltage < 4.8 V
In other than the above range, C14 (P0120) is indicated.		 TP sensor, lead wire/coupler connection
P0120 2 Sensor voltage is higher than specified value. TP sensor circuit shorted to VCC or ground circuit open
L Sensor voltage is lower than specified value. TP sensor circuit open or shorted to ground or VCC circuit open
C15 ECT sensor
indicated.		 The sensor voltage should be the following. 0.15 V 5 Sensor voltage < 4.85 V
In other than the above range, C15 (P0115) is i		 ECT sensor, lead wire/coupler connection
P0115
Sensor voltage is higher than specified value. ECT sensor circuit open or ground circuit open
L Sensor voltage is lower than specified value. ECT sensor circuit shorted to ground
C21 IAT sensor
indicated.		 The sensor voltage should be the following. 0.15 V 5 Sensor voltage < 4.85 V
In other than the above range, C21 (P0110) is i		 IAT sensor, lead wire/coupler connection
P0110 1=7 Sensor voltage is higher than specified value. IAT sensor circuit open or ground circuit open
L Sensor voltage is lower than specified value. IAT sensor circuit shorted to ground
C22 AP sensor The sensor voltage should be the following. 0.5 V 5 Sensor voltage < 4.85 V
In other than the above range, C22 (P1450) is indicated.		 AP sensor, lead wire/coupler connection
P1450 I= Sensor voltage is higher than specified value. AP sensor circuit shorted to VCC or ground circuit open
L Sensor voltage is lower than specified value. AP sensor circuit open or shorted to ground or VCC circuit open
C23 TO sensor The sensor voltage should be the following for 2 sec. and more, after ignition switch is turned ON.
0.2 V 5 Sensor voltage < 4.8 V
In other than the above value, C23 (P1651) is indicated.		 TO sensor, lead wire/coupler connection
P1651
Sensor voltage is higher than specified value. TO sensor circuit shorted to VCC or ground circuit open
L Sensor voltage is lower than specified value. TO sensor circuit open or shorted to ground or VCC circuit open
C24/C25
C26/C27		 Ignition signal CKP sensor (pick-up coil) signal is produced, but signal from ignition coil is interrupted 8 times or more continuously. In this case, the code C24 (P0351), C25 (P0352), C26 (P0353) or C27 (P0354) is indicated. Ignition coil, wiring/coupler connection, power supply from the battery
P0351/P0352
P0353/P0354
C28 STV actuator When no actuator control signal is supplied from the ECM, communication signal does not
reach ECM or operation voltage does not STVA motor, lead wire/coupler
reach STVA motor, C28 (P1655) is indicated. connection
STVA can not operate properly or its motor
locked.
P1655
C29
The sensor should produce following voltage.
0.15 V 5 Sensor voltage < 4.85 V STP sensor, lead wire/coupler
In other than the above range, C29 (P1654) is connection
indicated.
P1654 H STP sensor
Sensor voltage is higher than specified value.		 STP sensor circuit shorted to VCC or ground circuit open
L Sensor voltage is lower than specified value. STP sensor circuit open or shorted to ground or VCC circuit open
C31 Gear position signal Gear position signal voltage should be higher than the following for 3 seconds and more. Gear position sensor voltage 0.6 V
If lower than the above value, C31 (P0705) is indicated.		 GP switch, wiring/coupler connection, gearshift cam, etc.
P0705
C32/C33
C34/C35		 Primary fuel injector CKP sensor (pickup coil) signal is produced, but fuel injector signal is interrupted 4 times or more continuously. In this case, the code C32 (P0201), C33 (P0202), C34 (P0203) or C35 (P0204) is indicated. Primary fuel injector, wiring/ coupler connection, power supply to the injector
P0201/P0202
P0203/P0204
C36/C37
C38/C39		 Secondary fuel injector Some failure exists in the fuel injector signal in a high load, high revolution condition. In this case, the code C36 (P1764), C37 (P1765), C38 (P1766) or C39 (P1767) is indicated. Secondary fuel injector, wiring/ coupler connection, power supply to the injector
P1764/P1765
P1766/P1767
C40/P0505 ISC valve The circuit voltage of motor drive is unusual. ISC valve circuit open or shorted to ground
Power source circuit open
C40/P0506 Idle speed is lower than the desired idle speed. Air passage clogged
ISC valve is fixed
ISC valve preset position is incorrect
C40/P0507 Idle speed is higher than the desired idle speed. ISC valve hose connection ISC valve is fixed
ISC valve preset position is incorrect
C41 FP relay No voltage is applied to the fuel pump, although fuel pump relay is turned ON, or voltage is applied to fuel pump although fuel pump relay is turned OFF. Fuel pump relay, lead wire/ coupler connection, power source to fuel pump relay and fuel injectors
P0230 H Voltage is applied to fuel pump although fuel pump relay is turned OFF. Fuel pump relay switch circuit shorted to power source
Fuel pump relay (switch side)

No voltage is applied to the fuel pump, p, although fuel pump relay is turned ON. Fuel shortpump relay circuit open or
Fuel pump relay (coil side)
C41/P2505 ECM/PCM power input signal No voltage is applied to the ECM. Lead wire/coupler connection of ECM terminal to fuel fuse
C42 Ignition switch Ignition switch signal is not input to the ECM. * When the I.D. agreement is not verified.
* ECM does not receive communication signal from the immobilizer antenna.		 Ignition switch, lead wire/ coupler, etc.
* Immobilizer/anti-theft system
P1650
C44/P0130 H02 sensor H02 sensor output voltage is not input to ECM during engine operation and running
condition.
(Sensor voltage > 1.0 V)
C44 (P0130) is indicated.		 H02 sensor is circuit open or shorted to the power source
C44/P0135 The Heater can not operate so that heater operation voltage is not supply to the oxygen heater circuit, C44 (P0135) is indicated. Heated circuit open or shorted to ground
Battery voltage supply to the H02 sensor
C46 EXCV actuator EXCVA position sensor produces following voltage.
0.1 V 5 sensor voltage < 4.9 V
In other than the above range, C46 (P1675) is indicated.
When no actuator control signal is supplied from the ECM, communication signal does not reach ECM or operation voltage does not reach EXCVA motor, C46 (P1658) is
indicated. EXCVA can not operate.		 EXCVA, EXCVA lead wire/ coupler
P1657 2 EXCVA position sensor voltage is higher than specified value. EXCVA position sensor circuit shorted to VCC or ground circuit open
L EXCVA position sensor voltage is lower than specified value. EXCVA position sensor circuit open or shorted to ground or VCC circuit open
P1658 When no operation voltage reaches EXCVA motor, C46 (P1658) is indicated. EXCVA motor can not be operated.
wire/coupler		 EXCVA, EXCVA motor lead
C49 PAIR control solenoid valve PAIR control solenoid valve voltage is not input to ECM. PAIR control solenoid valve, lead wire/coupler connection
P1656
C60 Cooling fan relay Cooling fan relay signal is not input to ECM. Cooling fan relay, lead wire/ coupler connection
PO480
C62 EVAP system purge control solenoid valve (E-33 only) EVAP system purge control solenoid valve voltage is not input to ECM. EVAP system purge control solenoid valve, lead wire/ coupler connection
PO443
C91 Vehicle speed sensor Combination meter does not receive signal from the vehicle speed sensor for more than 6 sec. when the motorcycle is running.
ECM does not receive signal from the vehicle speed sensor for more than 6 sec. when the motorcycle is running.
Failure in communication between ECM and combination meter with reference to vehicle speed.		 Speed sensor and combination meter wiring/coupler connection between ECM and combination meter
P0500
C93 Steering damper solenoid valve Steering damper control current does not flow to the solenoid valve.
With IG turned ON, ECM detects a failure of internal circuit element. Solenoid current does not converge to the target value. Battery voltage is 10 V or below with the engine running.		 Steering damper solenoid valve circuit interrupter element shorted, feedback current convergence failure, low battery voltage
P1769 H Steering damper control current is higher than specified value.
An abnormal current is detected during the vehicle standstill. Solenoid current is 0.7 A or above.		 Steering damper solenoid valve circuit shorted to VCC
L Steering damper control current is lower than specified value.
With IG turned ON, ECM detects a discontinuity. An abnormal current is detected during the vehicle standstill.		 Steering damper solenoid valve circuit open or shorted

Suzuki Bandit 1250 Motorcycle Problems :

  • Suzuki bandit 1250 after fire
  • Suzuki bandit 1250 air cleaner clogged, poorly sealed, or missing
  • Suzuki bandit 1250 air cleaner element clogged
  • Suzuki bandit 1250 air duct loose
  • Suzuki bandit 1250 air suction valve trouble
  • Suzuki bandit 1250 air switching valve trouble
  • Suzuki bandit 1250 backfiring when deceleration
  • Suzuki bandit 1250 cracked or obstructed intake air pressure sensor
  • Suzuki bandit 1250 crankshaft sensor trouble
  • Suzuki bandit 1250 eCU ground and power supply trouble
  • Suzuki bandit 1250 eCU trouble
  • Suzuki bandit 1250 engine overheating — Water temperature sensor or crankshaft sensor trouble
  • Suzuki bandit 1250 engine stalls easily
  • Suzuki bandit 1250 engine vacuum not synchronizing
  • Suzuki bandit 1250 exhaust Smokes Excessively
  • Suzuki bandit 1250 firing incorrect
  • Suzuki bandit 1250 fuel filter clogged
  • Suzuki bandit 1250 fuel injector clogged
  • Suzuki bandit 1250 fuel injector O-ring damage
  • Suzuki bandit 1250 fuel injector trouble
  • Suzuki bandit 1250 fuel line clogged
  • Suzuki bandit 1250 fuel poor quality or incorrect
  • Suzuki bandit 1250 fuel pressure regulator trouble
  • Suzuki bandit 1250 fuel pressure too low or too high
  • Suzuki bandit 1250 fuel pump bearings may wear. Replace the fuel pump
  • Suzuki bandit 1250 fuel pump not operating
  • Suzuki bandit 1250 fuel pump operates intermittently and often DFI fuse blows
  • Suzuki bandit 1250 fuel pump relay trouble
  • Suzuki bandit 1250 fuel pump trouble
  • Suzuki bandit 1250 fuel/air mixture incorrect
  • Suzuki bandit 1250 fuel/air mixture incorrect
  • Suzuki bandit 1250 gear position sensor, starter lockout or side stand switch trouble
  • Suzuki bandit 1250 inspect and repair or replace
  • Suzuki bandit 1250 intake air pressure sensor trouble
  • Suzuki bandit 1250 intake air temperature sensor trouble
  • Suzuki bandit 1250 intake air temperature sensor trouble
  • Suzuki bandit 1250 intermittent any DFI fault and its recovery
  • Suzuki bandit 1250 little fuel in tank
  • Suzuki bandit 1250 main throttle sensor trouble
  • Suzuki bandit 1250 no or little fuel in tank
  • Suzuki bandit 1250 poor acceleration
  • Suzuki bandit 1250 spark plug burned or gap maladjusted
  • Suzuki bandit 1250 spark plug dirty, broken or gap maladjusted
  • Suzuki bandit 1250 spark plug incorrect
  • Suzuki bandit 1250 spark weak
  • Suzuki bandit 1250 stick coil shorted or not in good contact
  • Suzuki bandit 1250 stick coil trouble
  • Suzuki bandit 1250 subthrottle sensor trouble
  • Suzuki bandit 1250 subthrottle valve actuator trouble
  • Suzuki bandit 1250 throttle body assy dust seal damage
  • Suzuki bandit 1250 throttle body assy holder loose
  • Suzuki bandit 1250 throttle valves will not fully open
  • Suzuki bandit 1250 unstable (rough) idling
  • Suzuki bandit 1250 unstable fuel pressure
  • Suzuki bandit 1250 vacuum hose
  • Suzuki bandit 1250 vehicle-down sensor trouble
  • Suzuki bandit 1250 water or foreign matter in fuel Change fuel
  • Suzuki bandit 1250 water temperature sensor trouble

The first sign that your Suzuki Bandit 1250 motorcycle’s starter system is working well is the warning light that appears when you switch on the ignition. It will illuminate for a few seconds, and then go out. This is a good sign that your starter system is working properly and you’ll be able to start your motorcycle without difficulty.

Suzuki Logo

Suzuki Motors was a transformation of the original Suzuki Loom Works company in 1954, after the textile industry in Japan collapsed. The motorcycle arm of the company rapidly developed powerful and small engines, and today is known for powerhouse motorcycles like the Hayabusa and the GSX-R1000R.

Check other Suzuki fault codes.

These abbreviations, and the accompanying list of trouble codes, can be a
great start when your Suzuki check engine light comes on. As mentioned
above, if you are not comfortable with electrical diagnostic work, a dealership or qualified
technician can offer assistance. Please keep in mind that even though you have the ability to
clear a DTC using the onboard diagnostic feature, you shouldn’t clear the code prior to your
service appointment. Let the technician view and clear the codes as they troubleshoot the issue.

Suzuki and logo are registered trademarks of Suzuki. We are fan of MOTORCYCLES ! We love them.

Источник
  1. Manuals
  2. Brands
  3. Suzuki Manuals
  4. Motorcycle
  5. GSF1250

Manuals and User Guides for Suzuki GSF1250. We have 2 Suzuki GSF1250 manuals available for free PDF download: Service Manual, Owner’s Manual

Suzuki GSF1250 Service Manual

Suzuki GSF1250 Service Manual (685 pages)

Brand: Suzuki
|
Category: Motorcycle
|
Size: 55.77 MB

Table of Contents

  • Section 1 Engine

    65

    • General Information

      16

    • Fuel and Oil Recommendation

      19

    • Vehicle Identification Number

      19

    • Cylinder Identification

      20

    • Maintenance and Lubrication

      32

    • Scheduled Maintenance

      32

    • Lubrication Points

      33

    • Table of Contents

      65

    • Precautions

      69

      • Precautions for Engine

        69

    • Engine General Information and Diagnosis

      70

    • General Description

      70

      • Injection Timing Description

        70

      • Self-Diagnosis Function

        71

    • Schematic and Routing Diagram

      73

      • FI System Wiring Diagram

        73

      • Terminal Alignment of ECM Coupler

        74

    • Component Location

      75

      • FI System Parts Location

        75

    • Diagnostic Information and Procedures

      76

      • Engine Symptom Diagnosis

        76

      • Self-Diagnostic Procedures

        80

      • Use of SDS Diagnosis Reset Procedures

        82

      • Show Data When Trouble (Displaying Data at the Time of DTC)

        83

      • SDS Check

        84

      • DTC Table

        87

      • Fail-Safe Function Table

        89

      • FI System Troubleshooting

        90

      • Malfunction Code and Defective Condition Table

        91

        • DTC «C12» (P0335): CKP Sensor Circuit Malfunction

          94

        • DTC «C13» (P0105-H/L): IAP Sensor (No.1) Circuit Malfunction

          97

        • DTC «C14» (P0120-H/L): TP Sensor Circuit Malfunction

          106

        • DTC «C15» (P0115-H/L): ECT Sensor Circuit Malfunction

          114

        • DTC «C17» (P1750-H/L): IAP Sensor (No.2) Circuit Malfunction

          121

        • DTC «C21» (P0110-H/L): IAT Sensor Circuit Malfunction

          129

        • DTC «C23» (P1651-H/L): to Sensor Circuit Malfunction

          136

        • DTC «C24» (P0351), «C25» (P0352), «C26» (P0353) or «C27» (P0354): Ignition System Malfunction

          142

        • DTC «C28» (P1655): Secondary Throttle Valve Actuator (STVA) Malfunction

          142

        • DTC «C29» (P1654-H/L): Secondary Throttle Position Sensor (STPS) Circuit Malfunction

          146

        • DTC «C31» (P0705): GP Switch Circuit Malfunction

          154

        • DTC «C32» (P0201), «C33» (P0202), «C34» (P0203) or «C35» (P0204): Fuel Injector Circuit Malfunction

          156

        • DTC «C40» (P0505 / P0506 / P0507): ISC Valve Circuit Malfunction

          160

        • DTC «C41» (P0230-H/L): FP Relay Circuit Malfunction

          166

        • DTC «C41» (P2505): ECM Power Input Signal Malfunction

          169

        • DTC «C42» (P1650): IG Switch Circuit Malfunction

          171

        • DTC «C44» (P0130/P0135): HO2 Sensor (HO2S) Circuit Malfunction

          171

        • DTC «C49» (P1656): PAIR Control Solenoid Valve Circuit Malfunction

          177

        • DTC «C60» (P0480): Cooling Fan Relay Circuit Malfunction

          180

    • Specifications

      183

      • Service Data

        183

    • Special Tools and Equipment

      184

      • Special Tool

        184

    • Emission Control Devices

      185

    • Precautions

      185

      • Precautions for Emission Control Devices

        185

    • General Description

      185

      • Fuel Injection System Description

        185

      • Crankcase Emission Control System Description

        186

      • Exhaust Emission Control System Description

        187

      • Noise Emission Control System Description

        187

    • Schematic and Routing Diagram

      188

      • PAIR System Hose Routing Diagram

        188

    • Repair Instructions

      189

      • Heated Oxygen Sensor (HO2S) Removal and Installation

        189

      • Heated Oxygen Sensor (HO2S) Inspection

        189

      • PAIR Reed Valve Removal and Installation

        190

      • PAIR Control Solenoid Valve Removal and Installation

        190

      • PAIR System Inspection

        190

      • Crankcase Breather (PCV) Hose Inspection

        192

      • Crankcase Breather (PCV) Hose / Cover / Separator Removal and Installation

        192

      • Crankcase Breather (PCV) Cover Inspection

        193

    • Specifications

      194

      • Service Data

        194

      • Tightening Torque Specifications

        194

    • Special Tools and Equipment

      194

      • Recommended Service Material

        194

      • Special Tool

        194

    • Engine Electrical Devices

      195

    • Precautions

      195

      • Precautions for Engine Electrical Device

        195

    • Component Location

      195

      • Engine Electrical Components Location

        195

    • Diagnostic Information and Procedures

      195

      • Engine Symptom Diagnosis

        195

    • Repair Instructions

      195

      • ECM Removal and Installation

        195

      • CKP Sensor Inspection

        195

      • IAP Sensor (No.1) Removal and Installation

        196

      • IAP / TP / IAT Sensor Inspection

        196

      • IAP / TP / IAT Sensor Removal and Installation

        196

      • ECT Sensor Removal and Installation

        196

      • ECT Sensor Inspection

        197

      • TO Sensor Removal and Installation

        197

      • TO Sensor Inspection

        197

      • STP Sensor Inspection

        197

      • STP Sensor Adjustment

        198

      • STP Sensor Removal and Installation

        198

      • STV Actuator Inspection

        199

      • STV Actuator Removal and Installation

        199

      • ISC Valve Inspection

        199

      • ISC Valve Removal and Installation

        199

      • ISC Valve Preset and Opening Initialization

        200

      • HO2 Sensor Inspection

        200

      • HO2 Sensor Removal and Installation

        200

      • GP Switch Inspection

        200

      • GP Switch Removal and Installation

        200

    • Specifications

      201

      • Service Data

        201

      • Tightening Torque Specifications

        202

    • Special Tools and Equipment

      202

      • Recommended Service Material

        202

      • Special Tool

        202

    • Engine Mechanical

      203

    • Schematic and Routing Diagram

      203

      • Camshaft and Sprocket Assembly Diagram

        203

      • Throttle Cable Routing Diagram

        204

    • Diagnostic Information and Procedures

      205

      • Engine Mechanical Symptom Diagnosis

        205

      • Compression Pressure Check

        205

    • Repair Instructions

      206

      • Engine Components Removable with the Engine in Place

        206

      • Air Cleaner Element Removal and Installation

        208

      • Air Cleaner Element Inspection and Cleaning

        208

      • Air Cleaner Box Removal and Installation

        208

      • Throttle Cable Removal and Installation

        208

      • Throttle Cable Inspection

        209

      • Throttle Cable Play Inspection and Adjustment

        209

      • Throttle Body Components

        209

      • Throttle Body Construction

        210

      • Throttle Body Removal and Installation

        211

      • Throttle Body Disassembly and Assembly

        212

      • Throttle Body Inspection and Cleaning

        217

      • Throttle Valve Synchronization

        217

      • Engine Assembly Removal

        219

      • Engine Assembly Installation

        223

      • Tightening Torque

        224

      • Engine Top Side Disassembly

        226

      • Engine Top Side Assembly

        230

      • Valve Clearance Inspection and Adjustment

        238

      • Camshaft Inspection

        238

      • Camshaft Sprocket Inspection

        240

      • Camshaft Sprocket Removal and Installation

        240

      • Cam Chain Tension Adjuster Inspection

        241

      • Cam Chain Guide Removal and Installation

        241

      • Cam Chain Guide Inspection

        241

      • Cam Chain Tensioner Inspection

        242

      • Cylinder Head Disassembly and Assembly

        242

      • Cylinder Head Related Parts Inspection

        246

      • Valve Guide Replacement

        249

      • Valve Seat Repair

        250

      • Cylinder Disassembly and Assembly

        250

      • Cylinder Inspection

        252

      • Piston Ring Removal and Installation

        253

      • Piston and Piston Ring Inspection

        254

      • Engine Bottom Side Disassembly

        255

      • Engine Bottom Side Assembly

        263

      • Crank Balancer Disassembly and Assembly

        274

      • Crank Balancer Inspection

        275

      • Conrod Removal and Installation

        276

      • Conrod and Crankshaft Inspection

        277

      • Conrod Crank Pin Bearing Inspection and Selection

        278

      • Crankshaft Journal Bearing Inspection and Selection

        280

      • Crankshaft Thrust Clearance Inspection and Selection

        282

    • Specifications

      285

      • Service Data

        285

      • Tightening Torque Specifications

        286

    • Special Tools and Equipment

      287

      • Recommended Service Material

        287

      • Special Tool

        288

    • Engine Lubrication System

      291

    • Precautions

      291

      • Precautions for Engine Oil

        291

    • Schematic and Routing Diagram

      292

      • Engine Lubrication System Chart Diagram

        292

      • Oil Pan

        292

    • Diagnostic Information and Procedures

      293

      • Engine Lubrication Symptom Diagnosis

        293

      • Oil Pressure Check

        293

    • Repair Instructions

      294

      • Engine Oil and Filter Replacement

        294

      • Engine Oil Level Inspection

        294

      • Oil Pan / Oil Strainer / Oil Pressure Regulator Removal and Installation

        294

      • Oil Pressure Regulator / Oil Strainer Inspection

        296

      • Oil Cooler Removal and Installation

        297

      • Oil Pressure Switch Removal and Installation

        297

      • Oil Pressure Switch Inspection

        298

      • Oil Jet Removal and Installation

        298

      • Oil Gallery Jet Removal and Installation

        300

      • Oil Jet / Oil Gallery Jet Inspection

        300

      • Oil Pump Removal and Installation

        301

      • Oil Pump Inspection

        303

    • Specifications

      303

      • Service Data

        303

      • Tightening Torque Specifications

        303

    • Special Tools and Equipment

      304

      • Recommended Service Material

        304

      • Special Tool

        304

    • Engine Cooling System

      305

    • Precautions

      305

      • Precautions for Engine Cooling System

        305

      • Precautions for Engine Coolant

        305

    • General Description

      305

      • Engine Coolant Description

        305

    • Schematic and Routing Diagram

      306

      • Cooling Circuit Diagram

        306

      • Water Hose Routing Diagram

        307

    • Diagnostic Information and Procedures

      308

      • Engine Cooling Symptom Diagnosis

        308

    • Repair Instructions

      308

      • Cooling Circuit Inspection

        308

      • Radiator Cap Inspection

        309

      • Radiator Inspection and Cleaning

        309

      • Radiator / Cooling Fan Motor Removal and Installation

        309

      • Water Hose Inspection

        310

      • Water Hose Removal and Installation

        311

      • Radiator Reservoir Tank Inspection

        311

      • Radiator Reservoir Tank Removal and Installation

        312

      • Cooling Fan Inspection

        312

      • Cooling Fan Relay Inspection

        313

      • ECT Sensor Removal and Installation

        313

      • ECT Sensor Inspection

        313

      • Thermostat Connector / Thermostat Removal and Installation

        313

      • Thermostat Inspection

        315

      • Water Pump Components

        316

      • Water Pump Construction

        316

      • Water Pump Removal and Installation

        317

      • Water Pump Disassembly and Assembly

        318

      • Water Pump Related Parts Inspection

        321

    • Specifications

      322

      • Service Data

        322

      • Tightening Torque Specifications

        322

    • Special Tools and Equipment

      323

      • Recommended Service Material

        323

      • Special Tool

        323

    • Fuel System

      324

    • Precautions

      324

      • Precautions for Fuel System

        324

    • General Description

      325

      • Fuel System Description

        325

    • Schematic and Routing Diagram

      326

      • Fuel Tank Drain Hose and Breather Hose Routing Diagram

        326

    • Diagnostic Information and Procedures

      327

      • Fuel System Diagnosis

        327

    • Repair Instructions

      328

      • Fuel Pressure Inspection

        328

      • Fuel Pump Inspection

        328

      • Fuel Discharge Amount Inspection

        329

      • Fuel Pump Relay Inspection

        330

      • Fuel Hose Inspection

        330

      • Fuel Level Gauge Inspection

        330

      • Fuel Level Indicator Inspection

        330

      • Fuel Level Indicator Switch (Thermistor) Inspection

        330

      • Fuel Tank Construction

        331

      • Fuel Tank Removal and Installation

        332

      • Fuel Pump Components

        333

      • Fuel Pump Assembly / Fuel Level Gauge Removal and Installation

        334

      • Fuel Pump Disassembly and Assembly

        335

      • Fuel Mesh Filter Inspection and Cleaning

        337

      • Fuel Injector / Fuel Delivery Pipe / T-Joint Removal and Installation

        337

      • Fuel Injector Inspection and Cleaning

        337

    • Specifications

      338

      • Service Data

        338

      • Tightening Torque Specifications

        338

    • Special Tools and Equipment

      339

      • Recommended Service Material

        339

      • Special Tool

        339

    • Ignition System

      340

    • Schematic and Routing Diagram

      340

      • Ignition System Diagram

        340

      • Ignition System Components Location

        340

    • Diagnostic Information and Procedures

      341

      • Ignition System Symptom Diagnosis

        341

      • No Spark or Poor Spark

        342

    • Repair Instructions

      343

      • Ignition Coil / Plug Cap and Spark Plug Removal and Installation

        343

      • Spark Plug Inspection and Cleaning

        344

      • Ignition Coil / Plug Cap Inspection

        344

      • CKP Sensor Inspection

        346

      • CKP Sensor Removal and Installation

        347

      • Engine Stop Switch Inspection

        347

      • Ignition Switch Inspection

        348

      • Ignition Switch Removal and Installation

        348

    • Specifications

      350

      • Service Data

        350

      • Tightening Torque Specifications

        350

    • Special Tools and Equipment

      350

      • Special Tool

        350

    • Starting System

      351

    • Schematic and Routing Diagram

      351

      • Starting System Diagram

        351

    • Component Location

      351

      • Starting System Components Location

        351

    • Diagnostic Information and Procedures

      351

      • Starting System Symptom Diagnosis

        351

      • Starter Motor will Not Run

        352

      • Starter Motor Runs but Does Not Crank the Engine

        352

    • Repair Instructions

      353

      • Starter Motor Components

        353

      • Starter Motor Removal and Installation

        354

      • Starter Motor Disassembly and Assembly

        355

      • Starter Motor Inspection

        356

      • Starter Relay Removal and Installation

        357

      • Starter Relay Inspection

        357

      • Turn Signal / Side-Stand Relay Removal and Installation

        358

      • Side-Stand / Ignition Interlock System Parts Inspection

        358

      • Starter Clutch Removal and Installation

        360

      • Starter Clutch Inspection

        362

      • Starter Button Inspection

        363

    • Specifications

      363

      • Service Data

        363

      • Tightening Torque Specifications

        363

    • Special Tools and Equipment

      364

      • Recommended Service Material

        364

      • Special Tool

        364

    • Charging System

      365

    • Schematic and Routing Diagram

      365

      • Charging System Diagram

        365

    • Component Location

      365

      • Charging System Components Location

        365

    • Diagnostic Information and Procedures

      365

      • Charging System Symptom Diagnosis

        365

      • Battery Runs down Quickly

        366

    • Repair Instructions

      367

      • Battery Current Leakage Inspection

        367

      • Regulated Voltage Inspection

        367

      • Generator Inspection

        367

      • Generator Removal and Installation

        368

      • Regulator / Rectifier Construction

        372

      • Regulator / Rectifier Inspection

        372

      • Battery Components

        373

      • Battery Charging

        373

      • Battery Removal and Installation

        376

      • Battery Visual Inspection

        376

    • Specifications

      377

      • Service Data

        377

      • Tightening Torque Specifications

        377

    • Special Tools and Equipment

      378

      • Recommended Service Material

        378

      • Special Tool

        378

    • Exhaust System

      379

    • Precautions

      379

      • Precautions for Exhaust System

        379

    • Repair Instructions

      380

      • Exhaust System Construction

        380

      • Exhaust Pipe / Muffler Removal and Installation

        381

      • Exhaust System Inspection

        384

    • Specifications

      384

      • Tightening Torque Specifications

        384

    • Special Tools and Equipment

      384

      • Recommended Service Material

        384

  • Section 2 Suspension

    385

    • Precautions

      386

      • Precautions for Suspension

        386

    • Suspension General Diagnosis

      387

    • Diagnostic Information and Procedures

      387

      • Suspension and Wheel Symptom Diagnosis

        387

    • Repair Instructions

      388

      • Front Fork Components

        388

      • Front Fork Removal and Installation

        389

      • Front Fork Inspection

        390

      • Front Fork Adjustment

        391

      • Front Fork Disassembly and Assembly

        391

      • Front Fork Parts Inspection

        396

    • Front Suspension

      388

    • Specifications

      397

      • Service Data

        397

      • Tightening Torque Specifications

        397

    • Special Tools and Equipment

      398

      • Recommended Service Material

        398

      • Special Tool

        398

    • Rear Suspension

      399

    • Repair Instructions

      399

      • Rear Suspension Components

        399

      • Rear Suspension Assembly Construction

        400

      • Rear Shock Absorber Removal and Installation

        401

      • Rear Suspension Inspection

        401

      • Rear Shock Absorber Inspection

        402

      • Rear Suspension Adjustment

        402

      • Rear Shock Absorber Disposal

        402

      • Cushion Lever Removal and Installation

        403

      • Cushion Lever Inspection

        404

      • Cushion Lever Bearing Removal and Installation

        404

      • Swingarm / Cushion Rod Removal and Installation

        405

      • Swingarm Related Parts Inspection

        407

      • Swingarm Bearing Removal and Installation

        408

    • Specifications

      410

      • Service Data

        410

      • Tightening Torque Specifications

        410

    • Special Tools and Equipment

      411

      • Recommended Service Material

        411

      • Special Tool

        411

    • Wheels and Tires

      412

    • Precautions

      412

      • Precautions for Wheel and Tire

        412

    • Repair Instructions

      413

      • Front Wheel Components

        413

      • Front Wheel Assembly Construction

        415

      • Front Wheel Assembly Removal and Installation

        417

      • Front Wheel Related Parts Inspection

        419

      • Front Wheel Dust Seal / Bearing Removal and Installation

        420

      • Rear Wheel Components

        423

      • Rear Wheel Assembly Construction

        425

      • Rear Wheel Assembly Removal and Installation

        427

      • Rear Wheel Related Parts Inspection

        428

      • Rear Wheel Dust Seal / Bearing Removal and Installation

        429

      • Tire Removal and Installation

        431

      • Wheel / Tire / Air Valve Inspection and Cleaning

        432

      • Air Valve Removal and Installation

        433

      • Wheel Balance Check and Adjustment

        434

    • Specifications

      434

      • Service Data

        434

      • Tightening Torque Specifications

        435

    • Special Tools and Equipment

      435

      • Recommended Service Material

        435

      • Special Tool

        435

  • Section 3 Driveline / Axle

    437

    • Precautions

      438

      • Precautions for Driveline / Axle

        438

    • Diagnostic Information and Procedures

      439

      • Drive Chain and Sprocket Symptom Diagnosis

        439

    • Repair Instructions

      439

      • Drive Chain Related Components

        439

      • Engine Sprocket Removal and Installation

        440

      • Rear Sprocket / Rear Sprocket Mounting Drum Removal and Installation

        442

      • Drive Chain Related Parts Inspection

        443

      • Sprocket Mounting Drum Dust Seal / Bearing Removal and Installation

        444

      • Drive Chain Replacement

        445

    • Drive Chain / Drive Train / Drive Shaft

      439

    • Specifications

      448

      • Service Data

        448

      • Tightening Torque Specifications

        448

    • Special Tools and Equipment

      449

      • Recommended Service Material

        449

      • Special Tool

        449

  • Section 4 Brake

    451

    • Precautions

      453

      • Precautions for Brake System

        453

      • Brake Fluid Information

        453

    • Brake Control System and Diagnosis

      454

    • Schematic and Routing Diagram

      454

      • Front Brake Hose Routing Diagram

        454

      • Rear Brake Hose Routing Diagram

        458

    • Repair Instructions

      460

      • Brake Pedal Height Inspection and Adjustment

        460

      • Front Brake Light Switch Inspection

        460

      • Rear Brake Light Switch Inspection

        461

      • Rear Brake Light Switch Inspection and Adjustment

        461

      • Brake Fluid Level Check

        461

      • Brake Hose Inspection

        461

      • Air Bleeding from Brake Fluid Circuit

        461

      • Brake Fluid Replacement

        463

      • Front Brake Hose Removal and Installation

        465

      • Rear Brake Hose Removal and Installation

        466

      • Front Brake Master Cylinder Components

        467

      • Front Brake Master Cylinder Assembly Removal and Installation

        467

      • Front Brake Master Cylinder / Brake Lever Disassembly and Assembly

        468

      • Front Brake Master Cylinder Parts Inspection

        470

      • Rear Brake Master Cylinder Components

        471

      • Rear Brake Master Cylinder Assembly Removal and Installation

        471

      • Rear Brake Master Cylinder Disassembly and Assembly

        472

      • Rear Brake Master Cylinder Parts Inspection

        473

    • Diagnostic Information and Procedures

      460

      • Brake Symptom Diagnosis

        460

    • Specifications

      474

      • Service Data

        474

      • Tightening Torque Specifications

        474

    • Special Tools and Equipment

      475

      • Recommended Service Material

        475

      • Special Tool

        475

    • Front Brakes

      476

    • Repair Instructions

      476

      • Front Brake Components

        476

      • Front Brake Pad Inspection

        477

      • Front Brake Pad Replacement

        477

      • Front Brake Caliper Removal and Installation

        478

      • Front Brake Caliper Disassembly and Assembly

        479

      • Front Brake Caliper Parts Inspection

        481

      • Front Brake Disc Removal and Installation

        482

      • Front Brake Disc Inspection

        482

    • Specifications

      483

      • Service Data

        483

      • Tightening Torque Specifications

        483

    • Special Tools and Equipment

      484

      • Recommended Service Material

        484

      • Special Tool

        484

    • Repair Instructions

      485

      • Rear Brake Components

        485

      • Rear Brake Pad Inspection

        486

      • Rear Brake Pad Replacement

        486

      • Rear Brake Caliper Removal and Installation

        488

      • Rear Brake Caliper Disassembly and Assembly

        488

      • Rear Brake Caliper Parts Inspection

        490

      • Rear Brake Disc Removal and Installation

        491

      • Rear Brake Disc Inspection

        491

    • Rear Brakes

      485

    • Specifications

      492

      • Service Data

        492

      • Tightening Torque Specifications

        492

    • Special Tools and Equipment

      493

      • Recommended Service Material

        493

      • Special Tool

        493

    • Precautions

      494

      • Precautions for ABS

        494

      • ABS Information

        494

    • General Description

      494

      • Wheel Speed Sensor Description

        494

      • ABS Control Unit Description

        495

      • Hydraulic Unit (HU) Description

        497

      • Self-Diagnosis Function and ABS Indicator Light Description

        498

      • Fail-Safe Function Description

        499

    • Abs

      494

    • Schematic and Routing Diagram

      500

      • ABS Wiring Diagram

        500

      • ABS Unit Diagram

        501

      • Front Wheel Speed Sensor Routing Diagram

        502

      • Rear Wheel Speed Sensor Routing Diagram

        504

    • Component Location

      505

      • ABS Components Location

        505

    • Diagnostic Information and Procedures

      506

      • ABS Troubleshooting

        506

      • Pre-Diagnosis Inspection

        508

      • ABS Indicator Light Inspection

        510

      • DTC (Diagnostic Trouble Code) Output

        516

      • DTC (Diagnostic Trouble Code) Deleting

        518

      • SDS Check

        522

      • Active Control Inspection

        523

      • DTC Table

        527

        • DTC «13» (C1613): Wheel Speed Sensor Rotor Malfunction

          528

        • DTC «14» (C1614): Wheel Speed Sensor Rotor Malfunction

          530

        • DTC «22» (C1622): ABS Actuator Circuit Malfunction

          532

        • DTC «23» (C1623): ABS Actuator Circuit Malfunction

          534

        • DTC «25» (C1625): Wheel Speed Sensor Related Malfunction

          536

        • DTC «35» (C1635): ABS Motor Malfunction

          538

        • DTC «41» (C1641): Wheel Speed Sensor Signal Malfunction

          540

        • DTC «42» (C1642): Wheel Speed Sensor Circuit Open

          542

        • DTC «43» (C1643): Wheel Speed Sensor Circuit Short

          546

        • DTC «44» (C1644): Wheel Speed Sensor Signal Malfunction

          548

        • DTC «45» (C1645): Wheel Speed Sensor Circuit Open

          550

        • DTC «46» (C1646): Wheel Speed Sensor Circuit Short

          554

        • DTC «47» (C1647): Supply Voltage (Increased)

          556

        • DTC «48» (C1648): Supply Voltage (Decreased)

          558

        • DTC «55» (C1655): ABS Control Unit Malfunction

          560

        • DTC «61» (C1661): ABS Solenoid Malfunction

          562

    • Repair Instructions

      563

      • ABS Control Unit Coupler Disconnect and Connect

        563

      • Front Wheel Speed Sensor Removal and Installation

        564

      • Rear Wheel Speed Sensor Removal and Installation

        564

      • Front Wheel Speed Sensor Rotor Removal and Installation

        565

      • Rear Wheel Speed Sensor Rotor Removal and Installation

        566

      • Wheel Speed Sensor and Sensor Rotor Inspection

        567

      • ABS Control Unit/Hu Removal and Installation

        567

    • Specifications

      569

      • Tightening Torque Specifications

        569

    • Special Tools and Equipment

      569

      • Special Tool

        569

  • Section 5 Transmission / Transaxle

    571

    • Precautions

      572

      • Precautions for Transmission / Transaxle

        572

    • Diagnostic Information and Procedures

      573

      • Manual Transmission Symptom Diagnosis

        573

    • Manual Transmission

      573

    • Repair Instructions

      574

      • Transmission Components

        574

      • Transmission Removal

        575

      • Transmission Installation

        577

      • Transmission Construction

        580

      • Countershaft Gear / Driveshaft Gear Disassembly and Assembly

        581

      • Transmission Related Parts Inspection

        584

      • Gear Position (GP) Switch Inspection

        584

      • Gear Position (GP) Switch Removal and Installation

        584

      • Gearshift Lever Construction

        585

      • Gearshift Lever Removal and Installation

        586

      • Gearshift Lever Height Inspection and Adjustment

        586

      • Gearshift Shaft / Gearshift Cam Plate Components

        586

      • Gearshift Construction

        587

      • Gearshift Shaft / Gearshift Cam Plate Removal and Installation

        587

      • Gearshift Linkage Inspection

        590

      • Gearshift Shaft Oil Seal / Bearing Removal and Installation

        591

    • Specifications

      592

      • Service Data

        592

      • Tightening Torque Specifications

        592

    • Special Tools and Equipment

      593

      • Recommended Service Material

        593

      • Special Tool

        593

    • Precautions

      594

      • Precautions for Clutch System

        594

      • Clutch Fluid (Brake Fluid) Information

        594

    • Clutch

      594

    • Schematic and Routing Diagram

      595

      • Clutch Hose Routing Diagram

        595

    • Repair Instructions

      596

      • Clutch Lever Position Switch Inspection

        596

      • Clutch Fluid Level Check

        596

      • Clutch Hose Inspection

        596

      • Air Bleeding from Clutch Fluid Circuit

        597

      • Clutch Fluid Replacement

        597

      • Clutch Hose Removal and Installation

        598

      • Clutch Control System Components

        599

      • Clutch Master Cylinder Assembly Removal and Installation

        600

      • Clutch Master Cylinder / Clutch Lever Disassembly and Assembly

        601

      • Clutch Master Cylinder Parts Inspection

        603

      • Clutch Release Cylinder / Push Rod Removal and Installation

        603

      • Clutch Push Rod (Left) Inspection

        604

      • Clutch Release Cylinder Disassembly and Assembly

        604

      • Clutch Release Cylinder Inspection

        604

      • Clutch Components

        605

      • Clutch Removal

        606

      • Clutch Installation

        607

      • Clutch Parts Inspection

        611

    • Diagnostic Information and Procedures

      596

      • Clutch System Symptom Diagnosis

        596

    • Specifications

      612

      • Service Data

        612

      • Tightening Torque Specifications

        612

    • Special Tools and Equipment

      613

      • Recommended Service Material

        613

      • Special Tool

        613

  • Section 6 Steering

    615

    • Precautions

      616

      • Precautions for Steering

        616

    • Steering General Diagnosis

      617

    • Diagnostic Information and Procedures

      617

      • Steering Symptom Diagnosis

        617

    • Repair Instructions

      618

      • Handlebar Components

        618

      • Handlebar Construction

        619

      • Handlebar Removal and Installation

        620

      • Handlebars Inspection

        621

      • Steering Components

        622

      • Steering Removal and Installation

        623

      • Steering Related Parts Inspection

        626

      • Steering System Inspection

        626

      • Steering Stem Bearing Removal and Installation

        626

      • Steering Tension Adjustment

        627

    • Steering / Handlebar

      618

    • Specifications

      628

      • Tightening Torque Specifications

        628

    • Special Tools and Equipment

      629

      • Recommended Service Material

        629

      • Special Tool

        629

  • Section 9 Body and Accessories

    631

    • Precautions

      633

      • Precautions for Electrical System

        633

    • Component Location

      633

      • Electrical Components Location

        633

    • Schematic and Routing Diagram

      634

      • Wiring Diagram (GSF1250)

        634

      • Wiring Diagram (GSF1250S)

        636

      • Wiring Diagram (GSF1250A)

        638

      • Wiring Diagram (GSF1250SA)

        639

      • Wiring Harness Routing Diagram

        641

    • Wiring Systems

      634

    • Specifications

      644

      • Service Data

        644

      • Tightening Torque Specifications

        644

    • Repair Instructions

      645

      • Headlight Components

        645

      • Headlight Removal and Installation

        646

      • Headlight Bulb Replacement

        647

      • Headlight Beam Adjustment

        649

      • Rear Combination Light Components

        649

      • Rear Combination Light Construction

        650

      • Rear Combination Light Removal and Installation

        650

      • Brake Light Bulb / Taillight Bulb Replacement

        651

      • License Plate Light Components

        651

      • License Plate Light Removal and Installation

        652

      • License Plate Light Bulb Replacement

        652

      • Turn Signal Light Components

        653

      • Front Turn Signal Light Removal and Installation

        653

      • Rear Turn Signal Light Removal and Installation

        654

      • Turn Signal Light Bulb Replacement

        654

      • Reflex Refractor Construction

        654

      • Turn Signal / Side-Stand Relay Inspection

        655

      • Turn Signal / Side-Stand Relay Removal and Installation

        655

      • Hazard Switch Inspection

        655

      • Turn Signal Switch Inspection

        655

      • Passing Light Switch Inspection

        656

      • Dimmer Switch Inspection

        656

    • Lighting Systems

      645

    • Special Tools and Equipment

      657

      • Special Tool

        657

    • Specifications

      657

      • Service Data

        657

      • Tightening Torque Specifications

        657

    • Combination Meter / Fuel Meter / Horn

      658

    • General Description

      658

      • Combination Meter System Description

        658

    • Repair Instructions

      659

      • Combination Meter Components

        659

      • Combination Meter Removal and Installation

        661

      • Combination Meter Disassembly and Assembly

        661

      • Combination Meter Inspection

        662

      • Engine Coolant Temperature Indicator Light Inspection

        662

      • Engine Coolant Temperature Removal and Installation

        663

      • Fuel Level Indicator Inspection

        663

      • Fuel Level Indicator Switch (Thermistor) Inspection

        664

      • Fuel Level Gauge Inspection

        665

      • Speedometer Inspection

        665

      • Speed Sensor Removal and Installation

        665

      • Speed Sensor Inspection

        666

      • Oil Pressure Indicator Inspection

        666

      • Oil Pressure Switch Removal and Installation

        667

      • Ignition Switch Inspection

        667

      • Ignition Switch Removal and Installation

        667

      • Horn Inspection

        667

      • Horn Removal and Installation

        668

    • Special Tools and Equipment

      669

      • Special Tool

        669

    • Specifications

      669

      • Service Data

        669

      • Tightening Torque Specifications

        669

    • Exterior Parts

      670

    • Schematic and Routing Diagram

      670

      • Seat Lock Cable Routing Diagram

        670

    • Repair Instructions

      671

      • Exterior Parts Construction

        671

      • Front Fender Construction

        673

      • Frame Cover Cushion Construction

        673

      • Engine Sprocket Outer Cover Cushion Construction

        674

      • Fastener Removal and Installation

        674

      • Exterior Parts Removal and Installation

        675

      • Seat Height Adjustment

        678

    • Body Structure

      679

    • Repair Instructions

      679

      • Body Frame Construction

        679

      • Engine Mounting Bracket Bushing Replacement

        679

        • Engine Mount Bushing Replacement

          680

        • Front Footrest Bracket Construction

          680

        • Side-Stand Construction

          681

        • Side-Stand Removal and Installation

          682

        • Center Stand Construction

          682

        • Center Stand Removal and Installation

          682

    • Specifications

      683

      • Tightening Torque Specifications

        683

    • Special Tools and Equipment

      683

      • Recommended Service Material

        683

Advertisement

Suzuki GSF1250 Owner's Manual

Suzuki GSF1250 Owner’s Manual (60 pages)

Brand: Suzuki
|
Category: Motorcycle
|
Size: 36.41 MB

Table of Contents

  • Break-In (Running-In)

    2

  • Table of Contents

    3

  • Table of Contents

    4

  • Consumer Information

    4

  • Accessory Information and Precaution Safety Tips

    5

  • Modification

    6

  • Safe Riding Recommendation for Motorcycle Riders

    6

  • Serial Number Location

    6

  • Noise Control System (Australia Only)

    7

    • Location of Parts

      8

    • Vehicle View and Parts Identification

      8

    • Ignition Switch

      9

    • Instrument Panel

      10

      • Fuel Meter

        11

      • Odometer

        11

      • Tachometer

        11

      • Trip Meters

        11

      • Clock

        12

      • Fuel Injection System Indicator «FI»

        12

      • Coolant Temperature Indicator Light

        13

      • High Beam Indicator Light

        13

      • Oil Pressure Indicator Light

        13

      • Turn Signal Indicator Light

        13

      • Clutch Lever Adjustment

        14

      • Hazard Warning Switch

        14

      • Left Handlebar

        14

      • Turn Signal Light Switch

        14

      • Electric Starter Button

        15

      • Engine Stop Switch

        15

    • Right Handlebar

      15

    • Throttle Grip

      15

    • Fuel Tank Cap

      16

    • Gearshift Lever

      16

    • Rear Brake Pedal

      16

    • Seat Lock and Helmet Holders

      17

    • Stands

      17

      • Damping Force Adjustment

        18

      • Spring Pre-Load Adjustment

        18

    • Suspension Adjustment

      18

    • Fuel, Engine Oil and Coolant Recommendations

      19

    • Seat Height Adjustment

      19

    • Fuel Octane Rating

      20

    • Oxygenated Fuel Recommendation

      20

    • Engine Oil

      20

    • SAE Engine Oil Viscosity

      20

    • Coolant

      21

    • Anti-Freeze

      21

    • Required Amount of Water/Coolant

      21

    • Jaso T903

      21

    • Break-In (Running-In) and Inspection before Riding

      22

    • Maximum Engine Speed Recommendation

      23

    • Breaking in the New Tires

      23

    • Initial Service

      23

    • Riding Tips

      24

    • Starting the Engine

      25

    • Starting off

      25

    • Using the Transmission

      26

    • Riding on Hills

      26

    • Stopping and Parking

      26

    • Shifting Up/Down Schedule

      26

    • Inspection and Maintenance

      27

    • Maintenance Schedule

      28

    • Tool Kit Location

      29

    • Fuel Tank Removal

      29

    • Lubrication Points

      30

    • Battery

      31

    • Air Cleaner

      31

    • Air Cleaner Drain Tube

      32

    • Spark Plugs Removal

      33

    • Spark Plug Inspection

      33

    • Spark Plug Replacement Guide

      33

    • Engine Oil Level Check

      34

    • Fuel Hose

      34

    • Spark Plug Installation

      34

    • Engine Oil and Filter Change

      35

    • Engine Idle Speed Inspection

      36

    • Throttle Cable Adjustment

      37

    • Clutch

      37

    • Coolant Level

      38

    • Coolant Change

      38

    • Drive Chain

      38

    • Drive Chain Cleaning and Oiling

      39

    • Drive Chain Adjustment

      39

    • Brakes

      40

    • Brake Fluid

      40

    • Brake Pads

      40

    • Tires

      41

    • Rear Brake Light Switch

      41

    • Rear Brake Pedal Adjustment

      41

    • Tire Pressure and Loading

      42

    • Tire Condition and Type

      42

    • Cold Tire Inflation Pressure

      42

    • Side Stand/Ignition Interlock Switch

      43

    • Front Wheel Removal

      44

    • Rear Wheel Removal

      45

    • Light Bulb Replacement

      46

    • Headlight/Position Light

      46

    • Brake Light/Taillight

      47

    • Headlight Beam Adjustment

      48

    • License Plate Light

      48

    • Turn Signal Light

      48

    • Fuses

      49

    • Troubleshooting

      50

    • Fuel Supply Check

      51

    • Ignition System Check

      51

    • Engine Stalling

      51

    • Cleaning

      53

    • Washing the Motorcycle

      53

    • Waxing the Motorcycle

      53

    • Inspection after Cleaning

      53

    • Storage

      54

    • Procedure for Returning to Service

      54

    • Specifications

      55

    • Index

      56

Advertisement

Related Products

  • Suzuki GSF1250A

  • Suzuki GSF1250S

  • Suzuki GSF1250SA

  • Suzuki GSF1200 2001

  • Suzuki GSF1200S 2001

  • Suzuki bandit gsf 1200v 1997

  • Suzuki bandit gsf 1200sv 1997

  • Suzuki GSF1200

  • Suzuki GSF1200S

  • Suzuki GSF1200SK6

Suzuki Categories

Motorcycle

Automobile

Motorcycle Accessories

Musical Instrument

Offroad Vehicle

More Suzuki Manuals

Источник

Всем привет! Купил себе gsf 1250 2007г. японец, есть несколько вопросов. Пишу здесь так как не нашел профильных форумов, если подскажите буду благодарен.
1. Лампочка нейтрали то показывает то нет (при включении зажигания тест лампочки проходит), натыкался на эту проблему здесь на сайте, я так понимаю поможет только замена датчика нейтрали?
2. При включении зажигания до пуска двигателя начинаются различные щелчки, жужжания типа релешек и бензонасоса, потом спустя пару секунд пропадают, это нормально знаю, но вот остается какое-то негромкое шипение. Звук похож (именно похож, но не оно) на спускающую покрышку. Доносится откуда-то из зоны впуска, и не проходит пока не завести двигатель или выключить зажигание, что это может быть?
3. Установлена неродная банка глушителя, но не прямоток, дырка маленькая, так вот при сбросе газа иногда стреляет негромко. Я знаю что это топливо догорает в коллекторе, вопрос: нормально ли это для инжекторного мотоцикла? На карбах обычно хлопки говорят о необходимости регулировки смеси, но там винтики хоть покрутить можно, а на инжекторе все в мозгах. Контрольная лампа FI на приборке ошибки не показывает. Мотоцикл заводится и едет без проблем.

  • cam0m1lecam0m1le
  • Роман Афанасьев
  • 17 января 2020 в 14:55

  • ?

Только зарегистрированные пользователи могут оставлять ответы и комментировать их.
Войдите, пожалуйста, или зарегистрируйтесь.

При перепечатке материалов, видео или картинок гиперссылка на «bikepost.ru» обязательна

Источник

Тема: Загорается чек F1  (Прочитано 13895 раз)

Подскажите пожалуйста в чем проблема, разгоняюсь больше 150км загорается чек F1. заглушу,заведу все норма,


Записан

Какой мот? В старых ставь перемычку в диагностический разъем и узнавай код FI (появится вместо FI). С новыми лучше бы сканером почитать на ходу, но можно попробовать и код получить также.


Записан

Victory Cross Country
Какую технику джиперу ни дай — все в эндуро превратится.

FI  — Это fault injection ошибка инжектора.
красная лампа
вероятно давление падает в топливной магистрале

причина может быть в засранном топливном фильтре

при большой скорости большой расход — не успевает прокачивать бензин


Записан

FI  — Это fault injection ошибка инжектора.
красная лампа
вероятно давление падает в топливной магистрале

причина может быть в засранном топливном фильтре

при большой скорости большой расход — не успевает прокачивать бензин

Зачем так путаешь человека?


Записан

Honda CB400SF
Honda CBR929RR
Suzuki DL1000K6
MG 1200 Stelvio NTX
Honda AT NEW

Подскажите пожалуйста, где топливный фильтр и что с ним делать, чистить, менять…. Тоже бы ла такая проблема (больше 150 загорался ф1)
А сегодня полез менять свечи, с передней все красиво, сухая, рабочая, а на заднем цилиндре черная, мокрая, заглянув через свечное отверстие в циллиндр, прошень тоже черный и мокрый, воняет бензином. может быть это связано?
хелп, помогите пожалуйста в мае планирую к вам в гости в РФ, потом в Брест, вресения мало, хочется разобраться поскорее с этим траблом

(DL1000, k4 2005)

« Последнее редактирование: 25 Февраля 2020, 02:02:06 от MotoFann »


Записан

GS450S 1989 — classics
DR650RSE 1992 — оффроуд, зимний корч
DL1000 k4 2005 — путешественник

http://v-strom.ru/forum/index.php/topic,668.0.html
Вот тебе все что ты хочешь и не хочешь знать про топливный фильтр.
Но если свечка мокрая, то не факт что дело в нем. Либо пропуски зажигания, либо форсунка льет.

Спасибо, обязательно изучу.

А может быть ссылка как проверить эти2 момента? Там же на каждый цилиндр получается своя катушка, как они проверяются, и как форсунки…


Записан

GS450S 1989 — classics
DR650RSE 1992 — оффроуд, зимний корч
DL1000 k4 2005 — путешественник

http://v-strom.ru/forum/index.php/topic,668.0.html
Вот тебе все что ты хочешь и не хочешь знать про топливный фильтр.
Но если свечка мокрая, то не факт что дело в нем. Либо пропуски зажигания, либо форсунка льет.

Спасибо, обязательно изучу.

А может быть ссылка как проверить эти2 момента? Там же на каждый цилиндр получается своя катушка, как они проверяются, и как форсунки…

Для свечей есть тестер. Правда он не очень объективен, но лучше чем ничего.
https://www.avtoall.ru/product-847960/?gclid=EAIaIQobChMIp9nmyq7s5wIVmeiaCh2nRA-pEAQYBSABEgKDuvD_BwE
Нажимать медленно. Желательно для начала потыкать им заведомо живую свечу, чтобы понять, как она себя ведет.

Как катушку проверить — непонятно. Если на заведомо живых свечах есть пропуски зажигания — скорее всего катушка делает мозги. Надежнее всего заменить катушку и сравнить до и после.


Записан

SV650 S ’99
DL1000 ‘2003

Вопрос. Какие симптомы когда пропуски зажигания? Хотел бы тоже затестить этот момент на своем моте. Иной раз кажется что немного пропадает тяга после 4000 вроде как нет подрыва 3-4-5 передача. Бывает дергается в этот момент. Возникает как будто только под нагрузкой. В остальное время все нормально. Свечи менялись, датчики заслонок тоже

« Последнее редактирование: 01 Июня 2020, 04:02:32 от Улыбоктебедедмокар »


Записан

8девятьодинсемь5Oo9зОо

Вопрос. Какие симптомы когда пропуски зажигания? Хотел бы тоже затестить этот момент на своем моте. Иной раз кажется что немного пропадает тяга после 4000 вроде как нет подрыва 3-4-5 передача. Бывает дергается в этот момент. Возникает как будто только под нагрузкой. В остальное время все нормально. Свечи менялись, датчики заслонок тоже

Думается мне, что надежно на 99% будет сканер+ноутбук и покататься, а потом разбираться с логами. Может, Яныча уговоришь…
И да, у тебя нет случаем раздушки или индикатора передач? Там что-то было с задушкой/раздушкой на передачах, кроме 4й.


Записан

Victory Cross Country
Какую технику джиперу ни дай — все в эндуро превратится.

Вопрос. Какие симптомы когда пропуски зажигания? Хотел бы тоже затестить этот момент на своем моте. Иной раз кажется что немного пропадает тяга после 4000 вроде как нет подрыва 3-4-5 передача. Бывает дергается в этот момент. Возникает как будто только под нагрузкой. В остальное время все нормально. Свечи менялись, датчики заслонок тоже

Самый надежный — свечи чернее чем обычно, ибо хуже очищаются. Но выкручивать свечи после каждой поездки ты очень удивишься.
Дергается — это могут датчики заслонок трахать мозги.
Нет тяги — бензонасос.
На всю эту историю может влиять забитый воздушный фильтр. Давно его смотрел?


Записан

SV650 S ’99
DL1000 ‘2003

Вопрос. Какие симптомы когда пропуски зажигания? Хотел бы тоже затестить этот момент на своем моте. Иной раз кажется что немного пропадает тяга после 4000 вроде как нет подрыва 3-4-5 передача. Бывает дергается в этот момент. Возникает как будто только под нагрузкой. В остальное время все нормально. Свечи менялись, датчики заслонок тоже

Давления бензина недостаточное.


Записан

Возушный фильтр сказать честно не помню когда менял. Скорее всего относительно недавно 🤣 что касается топливного то он выносной и пробег на нём тысяч 5-7. А вот про раздушку я хз что у меня с ней и есть ли она. Индикатора передач у меня нет


Записан

8девятьодинсемь5Oo9зОо

При включении зажигания все чаще и чаще вместо гудения подкачивающего насоса тишина и F1 на приборке. Выкл вкл зажигание — решает проблему. Заводится после ровно, на ходу тоже проблем нет.
Подыхает насос или контакты где то?


Записан

С уважением, Андрей.

При включении зажигания все чаще и чаще вместо гудения подкачивающего насоса тишина и F1 на приборке. Выкл вкл зажигание — решает проблему. Заводится после ровно, на ходу тоже проблем нет.
Подыхает насос или контакты где то?

Ключ зажигания мозги делает. Конкретную ошибку не помню, конечно же. Но на литрах есть такая же проблема: FI после поворота ключа. Перелогинился и поехал.


Записан

SV650 S ’99
DL1000 ‘2003

Источник

Компьютерная диагностика мотоциклов Suzuki

Производим компьютерную диагностику мотоциклов Suzuki.

В ходе диагностики считываются активные и существовавшие ранее ошибки системы FI, может быть произведен сброс ошибок, получены значения с активных датчиков в режиме реального времени. Возможно проводить активные тесты и синхронизировать инжекторы на мотоциклах, оборудованных ISC.

С помощью диагностики можно быстро и точно выявить существующую неисправность и получить информацию о ранее имеющих место проблемах с техникой при покупке.

Список поддерживаемых мотоциклов:

AN250 Burgman (2003-2011), AN400 Burgman (2003-2013), AN650 Burgman (2003-2013), B-King (2008-2012), Boulevard C109R/T (2008-2013), Boulevard C50 (2005-2013), Boulevard C90 (2005-2010), Boulevard C90T (2013), Boulevard M109R/R2 (2006-2013), Boulevard M50 (2005-2013), Boulevard M90 (2009-2013), DL1000 V-Strom (2004-2013), DL650 V-Strom (2004-2013), DR125SM (2009-2013), FL125SDW (2007-2011), GSF1250 Bandit (2007-2013), GSF650 Bandit (2007-2013), GSR400 (2006-2011), GSR600 (2006-2011), GSR750 (2011-2013), GSX-R1000 (2003-2013), GSX-R600 (2004-2013), GSX-R750 (2004-2013), GSX1250FA (2010-2013), GSX1300R Hayabusa (2008-2013), GSX1400 (2004-2009), GSX650F (2008-2013), GW 250 (2013), GZ125 (2007-2011), Gladius (2009-2013), Inazuma 250 (2013), Intruder C1500 (2005-2010), Intruder C1500T (2013), Intruder C1800R (2008-2013), Intruder C800 (2005-2013), Intruder M1500 (2009-2013), Intruder M1800R (2006-2013), Intruder M800 (2005-2013), LT-A400 KingQuad [ATV] (2010-2011), LT-A450X KingQuad [ATV] (2007-2011), LT-A700X KingQuad [ATV] (2005-2007), LT-A750X KingQuad [ATV] (2008-2011), LT-A750XP KingQuad [ATV] (2009-2011), LT-F400 King Quad [ATV] (2010-2011), LT-R450 QuadSport [ATV] (2006-2011), LT-Z400 QuadSport [ATV] (2009-2011), LTA500XP KingQuad [ATV] (2009-2011), RM-Z250 (2010-2013), RM-Z450 (2008-2013), RMX450Z (2010-2011), RV125 (2007-2013), RV200 (2008-2012), SFV400 (2010-2011), SFV650 (2009-2013), ST250X (2008-2011), SV1000 (2003-2009), SV650 (2003-2013), TU250 (2009-2013), UH125 (2007-2011), UH200 (2007-2011), UL250 (2008), UX125 (2008-2011), UX150 (2008-2011), VL1500 Intruder (2005-2010), VL400 (2009-2011), VL800 Intruder Volusia (2005-2013), VLR1800 (2008-2013), VZ1500 (2009-2011), VZ400 (2009-2011), VZ800 Marauder (2005-2013), VZR1800 (2006-2013)

Стоимость диагностики от 1500.

Источник

Понравилась статья? Поделить с друзьями:
  • Ошибка f04 на газовом котле viessmann как устранить
  • Ошибка err 01 canon связи между камерой
  • Ошибка gs 4244 мерседес актрос
  • Ошибка f1 52 автономка eberspacher
  • Ошибка f04 на газовом котле viessmann vitopend 100