Ошибка error 193

Edit: Though what follows makes sense it is actually incorrect. I’m keeping it here just for reference, but I may delete the answer later.

Note however that (at least on Windows 10, which I used to check) even if relocation information is available in the file, if the module is not a DLL it is not applied, so even if you didn’t get that error, unless your INTERFAC.DLL applies relocations to PCLDRN.exe after loading it, trying to use it is likely to break somewhere along the way.

---

With the loader snaps output the situation seems pretty obvious to me.

The loader snaps output once the file is found are (I numbered the lines):

(1)  18a0:2a40 @ 06859098 - LdrpMapViewOfSection - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\PCDLRN.exe
(2)  'CNCServer.exe': Loaded 'C:\QA\Pcdlrn\Win32\Release\PCDLRN.exe', Symbols loaded.
(3)  18a0:2a40 @ 06859597 - LdrpMapViewOfSection - RETURN: Status: 0x40000003
(4)  'CNCServer.exe': Unloaded 'C:\QA\Pcdlrn\Win32\Release\PCDLRN.exe'
(5)  18a0:2a40 @ 06859597 - LdrpFindOrMapDll - RETURN: Status: 0xc000007b
(6)  18a0:2a40 @ 06859597 - LdrpLoadImportModule - ERROR: Loading DLL PCDLRN.exe from path C:\QA\Pcdlrn\CNCSERVER\Win32\Release;C:\Windows\system32;C:\Windows\system;C:\Windows;.;C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\NativeBinaries\x86;C:\windows\system32;C:\windows;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Windows\system32;C:\Windows;C:
(7)  18a0:2a40 @ 06859597 - LdrpLoadImportModule - RETURN: Status: 0xc000007b
(8)  18a0:2a40 @ 06859597 - LdrpHandleOneOldFormatImportDescriptor - ERROR: Loading "?????" from the import table of DLL "C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL" failed with status 0xc000007b
(9)  18a0:2a40 @ 06859613 - LdrpUnloadDll - INFO: Unmapping DLL "C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL"
(10) 'CNCServer.exe': Unloaded 'C:\QA\Pcdlrn\Win32\Release\INTERFAC.dll'
(11) 18a0:2a40 @ 06859613 - LdrpLoadDll - RETURN: Status: 0xc000007b
(12) 18a0:2a40 @ 06859613 - LdrLoadDll - RETURN: Status: 0xc000007b

LdrpMapViewOfSection returns an error code (0x40000003) on line 3 which causes the module to unload (line 4) and then LdrpMapViewOfSection‘s caller — LdrpFindOrMapDll — translates the error code to 0xc000007b (STATUS_INVALID_IMAGE_FORMAT).

But the error that caused the load to fail was 0x40000003 — STATUS_IMAGE_NOT_AT_BASE. The description of this NTSTATUS is:

{Image Relocated} An image file could not be mapped at the address that is specified in the image file. Local fixes must be performed on this image.

(Source: NTSTATUS Values)

By default, EXEs don’t contain relocation information (as was mentioned in the comments). Usually that’s not a problem as the address space is rather free when the EXE is loaded into it. But your address space isn’t free. To make matters worse, all EXEs compiled by Visual C++ share the same base address by default:

The /BASE option sets a base address for the program, overriding the default location for an .exe or DLL file. The default base address for an .exe file is 0x400000 for 32-bit images or 0x140000000 for 64-bit images. For a DLL, the default base address is 0x10000000 for 32-bit images or 0x180000000 for 64-bit images.

(Source: Linker Options: /BASE (Base Address))

That’s probably the situation you have. CNCServer.exe already occupies 0x400000 and that’s the only place PCDLRN.exe can go. LdrpMapViewOfSection can’t map PCDLRN.exe to 0x400000 because it isn’t free and fails to map in anywhere else because there’s no relocation information.

And from there it goes up the call stack and changes the error, but not the underlying problem. Which is lack of relocation information.

You can see what happened when this error is encountered for a DLL with relocation information in your output too. When INTERFAC.dll is initially loaded:

18a0:2a40 @ 06858989 - LdrpFindOrMapDll - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL DLL path: C:\QA\Pcdlrn\CNCSERVER\Win32\Release;C:\Windows\system32;C:\Windows\system;C:\Windows;.;C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\NativeBinaries\x86;C:\windows\system32;C:\windows;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Windows
    18a0:2a40 @ 06858989 - LdrpSearchPath - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL DLL path: C:\QA\Pcdlrn\CNCSERVER\Win32\Release;C:\Windows\system32;C:\Windows\system;C:\Windows;.;C:\Program Files (x86)\Microsoft Visual Studio 14.0\Common7\IDE\CommonExtensions\Microsoft\TeamFoundation\Team Explorer\NativeBinaries\x86;C:\windows\system32;C:\windows;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\Windows\s
        18a0:2a40 @ 06858989 - LdrpResolveFileName - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL
        18a0:2a40 @ 06858989 - LdrpResolveFileName - RETURN: Status: 0x00000000
        18a0:2a40 @ 06858989 - LdrpResolveDllName - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL
        18a0:2a40 @ 06858989 - LdrpResolveDllName - RETURN: Status: 0x00000000
    18a0:2a40 @ 06858989 - LdrpSearchPath - RETURN: Status: 0x00000000
    18a0:2a40 @ 06859036 - LdrpMapViewOfSection - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL
'CNCServer.exe': Loaded 'C:\QA\Pcdlrn\Win32\Release\INTERFAC.dll', Symbols loaded.
    18a0:2a40 @ 06859098 - LdrpMapViewOfSection - RETURN: Status: 0x40000003
    18a0:2a40 @ 06859098 - LdrpRelocateImage - ENTER: DLL name: C:\QA\Pcdlrn\Win32\Release\INTERFAC.DLL
        18a0:2a40 @ 06859098 - LdrpProtectAndRelocateImage - RETURN: Status: 0x00000000
    18a0:2a40 @ 06859098 - LdrpRelocateImage - RETURN: Status: 0x00000000
18a0:2a40 @ 06859098 - LdrpFindOrMapDll - RETURN: Status: 0x00000000

When LdrpMapViewOfSection returns STATUS_IMAGE_NOT_AT_BASE, it’s caller (LdrpFindOrMapDll) goes ahead and calls LdrpRelocateImage, something it apparently can’t to for PCDLRN.exe.

In this user guide, we describe some of the possible causes that can lead to Terminal Services error 193, and then we suggest some solutions that you can try to fix the problem.

Recommended: Fortect

1. Download and install Fortect

2. Open the program and click «Scan»

3. Click «Repair» to start the repair process

Download this software and fix your PC in minutes.

g.Error 193 0xc1 occurs when you refuse to find the exact path to a runtime file. Another possibility is that file types with the same name exist in the actual directory as the first word using the directory name. If there is a file, we either rename it mechanically or move it to another location.

g.

• Question

• Hello experts!
  We ran my application in Terminal Services, clients can access the application from the start menu of all their clients. Now we want to configure the client so that the application starts at runtime. When I open a remote desktop connection and specify a program launch with a filename for the application file, I get an error:

  An error (193) occurred at design time when the user logs in … Initial
  this the program does not start normally ………..

  The application is loadedWhen I point to “Run Program and Filename” on the remote connection to find the setup.exe file.

  Does anyone understand why this is happening?

  Hello Joe

Hello experts!
We performed my function in Terminal Services, clients can access the application from their clients’ start menu, all books are fine. We rightly want to set up the client technology that launches the application on playback. When I open a desktop connection from a remote computer and specify the program launch and filename for the application file, I get an error:

Error (193) was fixed when creating a user … Initial
This preparation cannot be started ………..

The application becomes heavy when I point to “Run program and file name” in the remote connection, the actual setup.exe file is from the application.

Someoneknows why this is happening?

Hello Joe

The Answers

• 

  Hi Joe

  What extension does this app have?

  If there is any type of file that the executable can be associated with, I don’t think it will be included in this website, for example if you paste “c: MyTextFile.txt” it will not work, but if you can start explorer, you know you need to load notepad and move ‘c: MyTestFile.txt’ as the paper parameter in.exe so that you can successfully convert ‘notepad’ instead. exe c: MyTestFile.txt ‘is the same that might have affected. It’s the same here, you can find out which executable is actually linked to which file you need to run.

  Thank you

  Prize Draw

If there might be a file type that the executable is associated with, I don’t think it will be included here, so for example if you type ‘c: MyTextFile.txt’ it won’t run, but if you move the explorer you can load editor and remove c: MyTestFile.txt as notepad parameter to.exe. notepad.exe c: MyTestFile.txt ‘to achieve the same effect. It’s the same here. You may need to find the executable file that is identified with the file you are trying to restart.

Download this software and fix your PC in minutes.

Check occasionally under “C: ” to see if “Program.exe” or “Program” exists.In the “C: Programs” section, check for “Platform.exe” or “Program”.Section “C: Program Files Platform Computing “check for” Platform.exe “or” Platform “.

If you see an “Error 193 0xc1” error in the shortcut of the .exe file, the technology target .exe file may be of the wrong type. To resolve this issue, delete the secret formula .exe file, then locate the main .exe file and create a new shortcut .exe file.

The main way to fix most of the problems yourself is to replace this particular Microsoft file with a blank copy. Additionally, some installation errors with Windows error code 0Xc1 can be caused by incorrect registry references, so we may recommend that you perform a registry scan to clean up any invalid entries.

Error De Servicios De Terminal 193
Oshibka Terminalnyh Sluzhb 193
Erro De Servicos De Terminal 193
Erreur De Services De Terminaux 193
Terminaltjanster Fel 193
터미널 서비스 오류 193
Terminal Services Fout 193
Blad Uslug Terminalowych 193
Terminaldienste Fehler 193
Errore Dei Servizi Terminali 193

If you also don’t know why you are getting or facing this type of Windows Error 193 iTunes iPhone Apple Device code problem on your Windows system PC as well as your iPhone devices or any other devices or laptops, then today you must have to check and read out this below blog post once for grabbing the best and easy, simple solutions and the methods for getting rid and getting back from this error code problem permanently from you. So, all you have to do is just read it fast now,

This shows an error code message like,

Windows Could not start the program on your Computer.

Error 193: 0xc1

” OR “

iTunes was not installed correctly. Please reinstall iTunes.

Error 7 (Windows Error 193)

This error issue occurs when the application management system of Windows fails to find the exact path of the .exe file of a program. This error problem can be caused by incompatible or outdated software on your PC. This error problem includes the system PC freezes, crashes & possible virus infection. This Error Code 193 is the most common error problem on the Windows PC & it indicates that there is an issue with a Windows service related to networking. This is an error that can occur on your Windows PC system mostly.

Causes of Windows Error 193 iTunes iPhone Apple Code Issue:

• Windows PC error issue
• When installing iTunes
• 0xc1 Windows service
• iTunes error problem
• iPhone Apple Device error

So, here are some quick tips and tricks for easily fixing and resolving this type of Windows Error 193 iTunes iPhone Apple Device Code issue from you permanently.

How to Fix Windows Error 193 iTunes iPhone Apple Device Code Problem

For WINDOWS PC:

1. Run System File Checker by sfc /scannow command in the CMD –

• Go to the start menu
• Search or go to the Command Prompt
• Click on it and opens it there
• A Pop-up will open there
• Type “sfc/scannow” command there
• After Press, enter to start it
• Now, wait for some time to scan
• After complete, close the tab
• That’s it, done

Running an sfc scan can completely eliminate this iTunes Error 7 Windows Error 193 problem from your PC.

2. Run CHKDSK /F Command in CMD to Check Hard Disk Corruption –

• Go to the start menu
• Search or go to the Cmd
• Then, A Pop-up will open
• Type the ” chkdsk /f ” command there in the Command prompt
• Press Enter to start it
• That’s it, done

It will run and check your Disk for any hard drive corruption so that it can easily solve this Windows Error 193 code problem.

3. Update your Windows Drivers –

• Go to the start menu
• Search or go to the Control Panel
• Click on it and opens it there
• After that, scroll down and go to the “Windows Update” section there
• Click on it & Check if any newly latest driver update is available or not
• If any, Update it fast
• Or, you can set it as ‘automatically update.’
• For that, go to the left side
• & click on the “Changes Settings” option there
• After opening, click on the drop-down menu there
• Select the “Install Updates Automatically” option there
• & click on the OK button to save this configuration
• After completing, close the tab
• That’s it, done

So by trying this guide and methods from here, you will get back from loadlibraryex Startup.dll failed with Error 193 problem.

” OR “

• Go to the start menu
• Search or go to the Control Panel or direct go to Device Manager
• Click on it and opens it there
• After going to the Device Manager there,
• check if any driver has an error sign there
• If any, then right-click on it
• & Click on the “Update driver software” there
• Wait for some minutes to update it
• After updating, close the tab
• That’s it, done

Updating your driver by any of these two methods can quickly fix and solve this System Error code 193 problem from your PC.

4. Fixing by the Registry Cleaner –

You can fix it by fixing the registry cleaner from any registry cleaner software, and it can also fix and solve this Error 7 Windows Error 193 code problem.

5. Run a System Diagnostics or Troubleshoot your Windows PC –

• Go to the start menu
• Search or go to the computer settings
• Opens it and clicks on the “Troubleshoot” option there
• After troubleshooting, close the tab
• That’s it, done

By running a system diagnostics or troubleshooting, your PC can fix and solve this Error 193 0xc1 problem from your PC.

6. Scan your Windows PC with Microsoft Security Essentials –

• Go to the start menu
• Search or go to ‘Microsoft Security Essentials.’
• Click on it & opens it.
• Tick the ‘Full‘ option to run a full scan of your Windows PC
• Now, click on the “Scan Now” option there to scan your PC
• Now, wait for some minutes or seconds to scan it
• After completing, close the tab
• That’s it, done

By scanning your PC for malware/viruses Microsoft Security Essentials can easily fix and solve the What is Windows Error 193 problem.

For iPhone Devices:

1. Update your iTunes Software –

Update your iTunes software for easily fixing and solving this iTunes Error 7 Windows Error 193 problem.

2. Contact Official Apple Support Team –

You can go to this Website: Apple Support and Contact the Official Apple Support Team for your this iTunes was not installed correctly. Error 193 code problem.

3. Run the Recovery Mode for your iPhone –

• Turn off your iPhone
• Open iTunes & then
• Connect your device to your PC by USB cable
• Press & hold the Home + sleep/wake button for some seconds
• Now, release the power button
• You will get ‘Connect to iTunes Screen.’
• Now, your iPhone will be detected in ‘Recovery Mode.’
• Backup & Restore the Data
• That’s it, done

Running recovery mode on the iPhone can easily solve this Error code 193 iTunes problem from you.

4. Reset your iPhone Device –

One of the best methods to solve this iTunes Error Code 193 problem is to reset your device. It will make many changes to your device. & also, make it better too. I know it’s the most annoying & frustrating task, but it will help you.

• Press & hold the Home & Sleep button (about 15 sec.)
• Reboot it
• That’s it, done

It will Reboot your device so that this iTunes Error 193 problem can be fixed. Hope it will work.

5. Reset the Network Settings –

You can Reset your all Network Settings

• Go to the Settings
• Select the General tab
• Click on the ‘Reset Network Settings‘ option there
• That’s it, done

It will Reset all your Network Settings to fix this Error code 193 iTunes problem.

6. Do a Factory Reset of your iPhone –

• Go to the settings
• Click on the ‘General‘ option
• Now, click on the “Reset & Approve” option there
• That’s it, done

Doing a factory reset of your iPhone can also fix this iTunes Error code 193 problem.

Conclusion:

These are the quick and the best methods to get rid of this Windows Error 193 iTunes iPhone Apple Device Code problem from you entirely. Hopefully, these solutions will help you get back from this Error Code 193 problem.

If you are facing or falling into this Windows Error 193 iTunes iPhone Apple Device Code problem or any error problem, then comment down the problem below so that we can fix and solve it too with our top best quick methods guides.