Перейти к контенту
Solution for Canon ir2525/ir2545 Error Code e000002.
Canon ir2520, ir2525, ir2530 error code e00000, e000002, e000003 and 00004 are from power outages, sometimes the printer does not reboot properly after a crash, and can get stuck in an error message.
Canon imageRunner 2520 error codes e000002
Here in this post, I explain how to fix error E00000-00001, E000001-0000, E000002-0000 code in Canon ir2520, ir2525, ir2530, ir2535, and ir2540 series, The most common error code e00000, e000002, e000003 and 00004 are from power outages, sometimes the printer does not reboot properly after a crash, and can get stuck in an error message.
Solution for Canon ir2525/ir2545 Error Code e000002 |
Meaning of the E00000 error code
The error code indicates that the machine doesn’t sense the temperature of the fuser getting hotter. Usually, this calls for the fixing film unit to be replaced because the thermistor has gone bad. The Fuser code needs to be reset in the service mode. It is easy to do.
How to fix the E00000 error code?
You need to go into service and clear the error then reset machine should work again. Follow the steps below:
Code reset:
- Press the Additional Functions (*) button.
- Press again the Additional Functions (*) button.
- The service mode should appear on the screen. Search for “CLEAR” press OK once.
- Then search for ENGINE and press Ok once on the screen.
- search for ERRCLR and press OK
- Turn off the machine from the main switch for about a minute and restart it.
If the fixing error code e00000 appears again, check your Fixing Assemble for jammed paper, or damage to the Fuser Film unit.
- Check the fixing film connector.
- Replace the fixing film unit.
- Replace the DC controller PCB.
After you replace the parts, then you have to reset the machine in services mode COPIER.
Please come back and just have a vote, it will give me some satisfaction to know am helping someone, so I will keep on helping.
Не так давно столкнулся с проблемой, что современные принтеры очень привередливы как к качеству бумаги или энергообеспечению, так и к многому другому. И все эти моменты тормозят рабочий процесс, а вызывать на каждую ошибку представителей сервис центров как минимум финансово не выгодно.
Проведя некоторое время в интернете нашел решения для некоторых ошибок, не скажу что они пропадают на вечно, но хотя бы на какой то промежуток времени рабочий процесс не останавливается.
Вот то что я проверил:
Модель: Canon imageRUNNER С1225
Ошибка: E021-0420
Метод решения:
заходим в service mode: Последовательно: Home (он же «домик») — 2 — 8 — Home (он же «домик»).
В показанном меню переходим:
COPIER->FUNCTION->CLEAR->ERR
Модель: Canon imageRUNNER 1435I
Ошибка: E002-0000
Метод решения:
заходим в service mode: Последовательно: *(она же «голова») — 2 — 8 — *(она же «голова»).
В показанном меню переходим:
COPIER->FUNCTION->CLEAR->ERR
kvg » Пт ноя 18, 2011 11:29 pm
именно такую ошибку и показывает?
Добавлено спустя 1 минуту 37 секунд:
если такую, то похоже, что ругается на отсутствие тонера.
Добавлено спустя 1 минуту 41 секунду:
или на печку:)
Добавлено спустя 4 минуты 13 секунд:
Похоже, что все-таки на печку, после устранения неисправности (недогрев) сбрасываете ошибку из сервиса —
CLEAR >ENGIN > ERRCLR; после этого выключаете и включаете питание.
Вход в сервис:
* 2 8 *
-
kvg
- Администратор сайта и форума
-
- Сайт
- Персональный альбом
traker » Сб ноя 19, 2011 6:28 am
спасибо сегодня пойду смотреть
Добавлено спустя 16 часов 35 минут 28 секунд:
kvg спасибо большое сбросить ошибку удалось проблема была в частых скачках напряжения
-
traker
- Пьет чернила
-
Вернуться в Принтеры, МФУ, копиры формата A3
Кто сейчас на форуме
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 9
Dislikes: 0
-
08-11-2011
#1
Senior Tech
250+ Posts
- Rep Power
- 26
CANON IR 2520 Showing Error code E000002.
Hi guys ihave the above machine am working on ,and showing the mentioned error.Ihave checked on the fixing unit and all is fine,have tried to clear the error all in vain.What could be the problem? Thanx.
-
08-11-2011
#2
Re: CANON IR 2520 Showing Error code E000002.
What do you mean»all is fine»Did you Go through the following to clear the error:CLEAR >ENGIN > ERRCLR;turn OFF and then ON the power.
Check connection of the Connectors (Thermistor Connector and AC Connector).Replace the Fixing Main Thermistor (Film Unit).
Replace the Fixing Assembly.
Replace the DC Controller PCB (PCB4).Practice makes perfect
If it ain’t broke, don’t fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
-
08-17-2011
#3
Senior Tech
250+ Posts
- Rep Power
- 26
Re: CANON IR 2520 Showing Error code E000002.
After afew days iwent back to revist the same machine,and went through the steps and the machine was reset.Thanx Zoraldinho for your assistance.
Tags for this Thread
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
-
Catalog
-
Sign In
-
Contacts
-
Forum
-
Eng
- Error Codes
- Canon
- iR2520
- All codes
Error Codes List page 6
- Code: E354-0000
- Description: Mismatched serial number for the SOFT-ID PCB
- Remedy:
- Code: E355-0000
- Description: Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM
- Remedy:
- Code: E355-0004
- Description: System information error
- Remedy:
- Code: E355-0005
- Description: System information error
- Remedy:
- Code: E500-0000
- Description: Communication error
The communication with the host machine is interrupted. - Remedy: 1.Check the cable. 2.Replace the Finisher Controller PCB (PCB1). 3.Replace the DC Controller PCB.
- Code: E505-0001
- Description: EEPROM error
The checksum for the EEPROM data has an error. - Remedy: 1.Replace the Finisher Controller PCB (PCB1).
Solution for Canon ir2525/ir2545 Error Code e000002.
Canon ir2520, ir2525, ir2530 error code e00000, e000002, e000003 and 00004 are from power outages, sometimes the printer does not reboot properly after a crash, and can get stuck in an error message.
Canon imageRunner 2520 error codes e000002
Here in this post, I explain how to fix error E00000-00001, E000001-0000, E000002-0000 code in Canon ir2520, ir2525, ir2530, ir2535, and ir2540 series, The most common error code e00000, e000002, e000003 and 00004 are from power outages, sometimes the printer does not reboot properly after a crash, and can get stuck in an error message.
Solution for Canon ir2525/ir2545 Error Code e000002 |
Meaning of the E00000 error code
The error code indicates that the machine doesn’t sense the temperature of the fuser getting hotter. Usually, this calls for the fixing film unit to be replaced because the thermistor has gone bad. The Fuser code needs to be reset in the service mode. It is easy to do.
How to fix the E00000 error code?
You need to go into service and clear the error then reset machine should work again. Follow the steps below:
Code reset:
- Press the Additional Functions (*) button.
- Press again the Additional Functions (*) button.
- The service mode should appear on the screen. Search for “CLEAR” press OK once.
- Then search for ENGINE and press Ok once on the screen.
- search for ERRCLR and press OK
- Turn off the machine from the main switch for about a minute and restart it.
If the fixing error code e00000 appears again, check your Fixing Assemble for jammed paper, or damage to the Fuser Film unit.
- Check the fixing film connector.
- Replace the fixing film unit.
- Replace the DC controller PCB.
After you replace the parts, then you have to reset the machine in services mode COPIER.
Please come back and just have a vote, it will give me some satisfaction to know am helping someone, so I will keep on helping.
kvg » Пт ноя 18, 2011 11:29 pm
именно такую ошибку и показывает?
Добавлено спустя 1 минуту 37 секунд:
если такую, то похоже, что ругается на отсутствие тонера.
Добавлено спустя 1 минуту 41 секунду:
или на печку:)
Добавлено спустя 4 минуты 13 секунд:
Похоже, что все-таки на печку, после устранения неисправности (недогрев) сбрасываете ошибку из сервиса —
CLEAR >ENGIN > ERRCLR; после этого выключаете и включаете питание.
Вход в сервис:
* 2 8 *
-
kvg
- Администратор сайта и форума
-
- Сайт
- Персональный альбом
traker » Сб ноя 19, 2011 6:28 am
спасибо сегодня пойду смотреть
Добавлено спустя 16 часов 35 минут 28 секунд:
kvg спасибо большое сбросить ошибку удалось проблема была в частых скачках напряжения
-
traker
- Пьет чернила
-
Вернуться в Принтеры, МФУ, копиры формата A3
Кто сейчас на форуме
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 14
Dislikes: 0
-
08-11-2011
#1
Senior Tech
250+ Posts
- Rep Power
- 27
CANON IR 2520 Showing Error code E000002.
Hi guys ihave the above machine am working on ,and showing the mentioned error.Ihave checked on the fixing unit and all is fine,have tried to clear the error all in vain.What could be the problem? Thanx.
-
08-11-2011
#2
Re: CANON IR 2520 Showing Error code E000002.
What do you mean»all is fine»Did you Go through the following to clear the error:CLEAR >ENGIN > ERRCLR;turn OFF and then ON the power.
Check connection of the Connectors (Thermistor Connector and AC Connector).Replace the Fixing Main Thermistor (Film Unit).
Replace the Fixing Assembly.
Replace the DC Controller PCB (PCB4).Practice makes perfect
If it ain’t broke, don’t fix it
A picture is worth a thousand words
If you want something done right, you have to do it yourself
-
08-17-2011
#3
Senior Tech
250+ Posts
- Rep Power
- 27
Re: CANON IR 2520 Showing Error code E000002.
After afew days iwent back to revist the same machine,and went through the steps and the machine was reset.Thanx Zoraldinho for your assistance.
Tags for this Thread
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules