Ошибка чекинг медиа презент

Что бы не стало причиной той или иной программной ошибки в Windows, её можно устранить путём восстановления конфигурации, файлов, в крайнем случае переустановкой самой операционной системы. Другое дело, когда ошибка возникает на аппаратном уровне или на уровне базовой системы ввода-вывода, такие ошибки обычно всегда приводят к появлению синего экрана смерти или чёрного экрана с малопонятными сообщениями, например, Checking Media Presence с отсылкой на интернет-протокол IPv4 («start pxe over IPv6 или IPv4».

Сразу нужно сказать, что данная ошибка встречается нечасто, и именно это обстоятельство затрудняет поиск её решения. В действительности же решение этой проблемы лежит на поверхности, всё что вам нужно, это изменить настройки BIOS, отвечающие за порядок загрузки. Дело в том, что помимо загрузки операционной системы с внутреннего жёсткого диска, DVD или флешки, система может загружаться из локальной сети. Такой способ загрузки иногда используется в коммерческих организациях, предпочитающих экономить на жёстких дисках. 

В этом случае клиентские компьютеры не оснащаются жёсткими дисками, операционная система на таких ПК грузится в оперативную память непосредственно с главного сервера. Естественно, для этого обслуживающий локальную сеть администратор выставляет в BIOS соответствующие настройки, которые пользователь обычного домашнего компьютера может изменить непреднамеренно, например, экспериментируя с функцией Wake-on-Lan, предназначенной для пробуждения компьютера по сети. 

Если при активной оной опции компьютер не сможет загрузиться с раздела с операционной системой, пользователь получит сообщение «Checking Media Presence. Start PXE over IPv4 и далее по списку). Неполадка также может быть вызвана сбросом BIOS до заводских настроек, манипуляциями с приоритетом загрузки. Во всяком случае при появлении на экране указанного сообщения необходимо проверить порядок загрузки с локальных и сетевых ресурсов. 

Первое, что нужно сделать при появлении сообщения Checking Media Presence, это зайти в BIOS, найти опцию Wake on LAN и выставить для неё значение Off, No или Disabled. В зависимости от типа в версии BIOS, располагаться она может в разделе Advanced или Integrated Peripherals. Ищем также и отключаем опции PXE Boot, PME Event Wake Up, Boot to Network, Onboard LAN Boot ROM или с похожим по смыслу названием, в котором присутствует слово «LAN».

Затем нужно зайти в раздел Boot → Boot Device Priority и убедиться, что первым загружаемым устройством выставлен жёсткий диск с операционной системой. Опять же в зависимости от версии BIOS название настройки может немного отличаться, например, Boot Priority Order, Boot Option Priority или Boot Priority; в AMI BIOS нужная вам настройка будет находиться в разделе Advanced BIOS Features и называться First Boot Device.

Проще всего управление приоритетом загрузки реализовано в современных версиях BIOS UEFI с их графическим интерфейсом. Раздел настройки порядка загрузки в UEFI обычно на виду, смотрите пример ниже. Если вместо диска с ОС выставлено любое иное устройство, меняем его на жёсткий диск и сохраняем настройки.

В крайнем случае вы можете сбросить настройки BIOS к заводским, вытащив на 10-15 минут питающую CMOS-память компьютера батарейку, но поступать мы так не рекомендуем, всё же лучше будет внимательно проверить сетевые настройки и порядок загрузки носителей.

После отключения указанных выше сетевых настроек и изменения порядка загрузки Windows должна загрузиться в обычном режиме, во всяком случае сообщение Checking Media Presence больше не должно появляться. Если Windows не загружается, и вы видите на экране другое сообщение, следует проверить состояние кабелей, контактов, жёсткого диска и загрузчика операционной системы, в зависимости от характера и содержания сообщения об ошибке.

Checking media presence No media Present (Проверка наличия носителя: нет носителя) — это ошибка, которая может возникнуть при попытке загрузить операционную систему на ноутбуке. Эта ошибка связана с невозможностью обнаружения жесткого диска или другой важной части компьютера. В этой статье мы рассмотрим, как ее исправить.

Шаг 1: Проверьте подключение жесткого диска

Первым делом необходимо проверить подключение жесткого диска. Выключите ноутбук и откройте его крышку. Убедитесь в том, что жесткий диск надежно подключен к материнской плате и кабелю SATA или IDE. Если надежное подключение не возможно, замените кабель или попросите квалифицированного специалиста установить новый жесткий диск.

Шаг 2: Проверьте BIOS

Если подключение жесткого диска в порядке, то необходимо проверить настройки BIOS. Загрузите ноутбук и нажмите клавишу, чтобы зайти в BIOS. Это может быть клавиша F1, F2, F10, F12 или Delete в зависимости от производителя ноутбука. В меню BIOS найдите раздел Boot и проверьте, распознает ли BIOS жесткий диск. Если он не распознается, попробуйте вручную настроить диск в разделе SATA Configuration и выберите устройство загрузки, на котором располагается операционная система.

Шаг 3: Проверьте загрузочное устройство

Если BIOS правильно настроен, то проблема может заключаться в загрузочном устройстве. Если вы используете устройство USB, убедитесь в том, что оно правильно подключено и настроено в BIOS как первичное устройство загрузки. Если вы используете DVD-диск, проверьте состояние диска и его наличие в дисководе.

Шаг 4: Попробуйте переустановить операционную систему

Если все предыдущие шаги были проверены и не имели результатов, то попробуйте переустановить операционную систему. Создайте загрузочный диск или флешку и переустановите операционную систему. Это поможет определить, возникает ли проблема с операционной системой или же со внутренними частями компьютера.

В идеале, если никакие из перечисленных выше шагов не помогли исправить проблему, то лучше всего обратиться за помощью к квалифицированному специалисту, который сможет более точно определить причину проблемы и предложить соответствующую рекомендацию по ее исправлению.

Вывод

Checking media presence No media Present — это серьезная проблема, которая может привести к тому, что операционная система не будет загружаться. Однако, чтобы исправить эту ошибку, достаточно выполнить несколько простых шагов, которые позволят вам успешно запустить ваш ноутбук.

It’s common to see a “checking media presence” error as soon as you turn on your PC. Well, there are several reasons behind this error, the most common one is when your PC tries to boot up from a source that is unavailable at the time.

Usually, this type of error occurs when your computer tries to boot from your local network instead of your storage device. One of the most reported errors is checking the media presence MSI that occurs on MSI desktops or laptop PCs. Here in this guide, we will lay out some of the most working methods to get rid of this error.

But before we start our troubleshooting process, it’s good to learn about this error first, what are causes behind this error are, and how we can adopt the right strategies to prevent this error in the future.

What Does Checking Media Presence Error Means?

Let’s start from the basics at this stage. As you know there are different types of options to boot your computer. You can boot through a hard drive, USB, or local network, etc. Checking media presence error occurs when the computer cannot detect the bootable device or the boot file is missing from your drive.

At the error screen, you would come across the “Media Present” or “No Media Present” Usually, this booting error would cause the wrong boot order on the PC and may also corrupt the system files.

In most cases, you’ll see a series of commands on your screen as shown in the image below:

As you can see in the image above, there is a line with “PXE over IPv4” which shows that your computer is trying to boot from an internet connection. So instead of trying to boot up from a local hard drive, the system is trying to boot up from a local network.

In our case, we want our system to boot from our local hard drive, and not from the local network. So, we have to fix this issue by following some of the proven methods.

How to Fix Checking Media Presence Error Windows 10/8/7

There are so many options available to boot from, and this error occurs when the computer is trying to boot from the wrong device. So, you have to set the boot priority for each device connected to your computer.

If the hard drive is on top of the boot order, the computer will try to boot first from the hard drive and then it will move on to another option if it doesn’t find any operating system. It’s simple to upgrade the BIOS with just a few steps:

• Press the BIOS setup button during the boot-up process.
• Go to the boot menu tab to see the bootable devices and their order.
• Keep the drive you want to boot at the top
• Save the settings and exit
• Please restart the computer to check whether it works or not
• Note that every motherboard brand has a different interface for the boot priority section.

2- Recovering Boot Files

If rearranging the boot menu won’t work for you, there this could be due to some missing or corrupt boot files. One way is to recover your lost file using the Windows Repair console. Another way around this is to reinstall your Windows 10 from scratch.

Go to the boot menu during the startup process by pressing Esc, F2, F10, or F12 keys, and there will be a list of bootable devices that appear in front of you. All you need to do is select the CD or USB as your first priority to install a fresh copy of Windows.

3- Checking the Health of Your Drive

If the steps mentioned above won’t work for you in troubleshooting the pc checking media presence error, the system may have some serious problems. Just check whether your hard drive or SSD is connected correctly to your CPU or not.

Disconnect and reconnect the hard drive. Dust residing inside the hard drive connectors could be causing the hard drive or SSD to disconnect over time. Just clean it with a soft brush.

If you are using an old hard drive, then it may be about to fail sooner or later. The hard drive comprises spindles, and each spindle is a collection of disks. When it faces a slight impact, it could result in the failure of a hard drive.

It’s better to copy your important data from your hard drive and move it to an SDD. To be honest, SSDs are cheaper now and are highly durable as compared to HDDs as they are no mechanical parts inside an SSD.

4- Disable Network Boot

If the problem is still there aren’t solved, you should disable the network boot in the BIOS setup. All you need to do is to follow these steps:

• Enter into your BIOS.
• Go to Security Settings, here you will see an option for Secure Boot. Disable this option.
• After disabling Secure Boot, change UEFI mode to Legacy
• Now, look for Network Boot in BIOS settings, and disable it.
• Apply the settings and restart your computer.

5- Disabling Wake on LAN (WoL)

In order to disable Wake on LAN in BIOS, here’s what you need to do:

• Restart your computer and press F2, Del, Esc, or F10 keys to enter into BIOS. Once you are inside the BIOS menu, look for power management, network settings, or advanced settings. This will depend upon your motherboard manufacturer, so you have to find the right one here.

• Once you are inside the power management or network menu, look for Wake-on-LAN or Remote Wakeup. You will find different options under them like Enabled, Disabled, or Auto.

• Now select the “Disabled” option and then Save & Exit BIOS settings, this will prevent your system from turning on when there’s a Wake on LAN signal.

Alternatively, you can also disable the Wake-on-Lan setting by navigating to your Device Manager and then selecting your Network Adapter. Right-click on the Network Adapter that you are using to connect to your Wi-Fi and then click on Properties.

Once the Properties menu opens, you can navigate to Advanced and then scroll down to find Wake on Magic Packet option. Select this option and then click on “Disabled“. Click OK and then Save settings.

6- Resetting the CMOS

You can simply reset the CMOS to reload all the default BIOS settings to get rid of checking media presence on startup error. In order to reset CMOS, you will need to locate the CMOS battery present on your motherboard.

Once you find the CMOS battery on your mobo, gently remove it and leave it outside for 10 minutes or so. Afterward, reinsert the battery back into the slot and turn on your computer.

7- Update BIOS

If you are getting checking media fail in Windows 10 or no media present error, then you have to update the computer’s BIOS. Updating your BIOS is essential because this error causes severe damage to the system. To update the BIOS, you need to follow:

• Back up data as errors in updating can cause permanent damage to data
• Don’t turn off and restart the computer during updates
• Keep your computer in a stable environment to prevent power breakdown
• Update after connecting the laptop to the charger and don’t unplug during the update

8- Get Professional Assistance

If none of the above methods is working for you to fix the media presence error or if you don’t have enough knowledge for troubleshooting PC hardware, then I’ll recommend you to get technical assistance from your local computer shop.

You can also seek help by contacting customer support staff if your PC comes under warranty.

How to Get into BIOS in Windows 10?

If you want to configure the BIOS settings in Windows 10, then you need to follow:

• Go to Settings
• Click on Update and Security
• Click on the Recovery button in the side menu
• Click on Restart Now Button in the Advanced startup
• After restart, a blue screen appears having a different option; just click on troubleshoot
• Select Advanced options

What is a BIOS setup?

BIOS is an essential feature that is pre-installed on your motherboard and can be used to control different types of hardware connected to your PC. It’s like the backend where you manually control different peripherals installed on your motherboard.

What is the difference between BIOS and UEFI?

BIOS is a bit of low-level code that is stored in non-volatile memory. Computer systems use it to manage hardware and load a particular OS over another operating system.

UEFI stands for universal extensible firmware interface, which has become standard for computer systems that have installed the latest versions. It offers support for advanced features like GUI and even mouse support.

How to Access The BIOS?

BIOS is usually accessed with the help of the BIOS setup utility. It can be accessed in several ways, depending on the computer and the motherboard. You can follow the below steps to access the BIOS setup utility:

• Restart the computer where you can switch on the computer system, and you need to be aware of getting access to BIOS, which is free from all types of OS. It is because the BIOS setup is part of the motherboard of the computer system/
• The message would vary from one computer to another system. It contains the keys that the user requires to press entering BIOS. There would be an option come such as Entering Setup that would appear in starting few seconds to turn on the computer system.
• You can quickly enter the keys as given by the last message to access BIOS. You must enter the BIOS key for accessing it several times for entering into BIOS. Don’t hold down the key or press it many times. Restart the computer system and try to get access.

Final Thoughts

We hope you now have enough knowledge to fix checking media presence or without media presence. Troubleshooting media presence error Lenovo/MSI/HP machines is very simple, you can even get rid of this error by rearranging the boot menu in your BIOS by selecting your hard drive as “first boot priority”.

If you are installing Windows and come up with a checking media presence error, then you have to set your CD-ROM/DVD or USB as your first boot priority in BIOS. Also, keep in mind that if you end up with no media present, then this could be due to the fact that your system was unable to find any device to boot from.

FAQs

How you can fix media presence errors in HP/MSI/Lenovo ThinkCentre PC?

You’ll need to follow the same procedure to get rid of this error. Restart your PC, and once the HP, MSI, or Lenovo logo appears on the screen, press the BIOS button.

The key to enter into BIOS is different for HP, MSI, and Lenovo. However, the most often used keys are F1, F2, or F10.

Once you are inside the BIOS menu, navigate to the Boot option and select the “UEFI Boot”. Now set the Boot Priority to Hard Disk first, and then select “Save & Exit”

How do I fix checking media presence media present start PXE over IPv4?

PXE boot happens when your system tries to boot up from the IPv4-based network. You can easily fix this issue by navigating to your “BIOS” and then selecting the “Security” Tab. Once you are there, select the “Secure Boot” and disable it.

The next step is to head over to the “Legacy Boot” and then disable that as well. Save these settings and then exit the BIOS.

How to fix Windows 11 checking media presence?

Normally, the method that we have used to fix media presence errors on Windows 10 would be applied on Windows 11 as well. As this error occurs before the operating system, it usually has nothing to do with the version of your operating system.

The message “Checking Media Presence” appears when the BIOS is checking for the Operating System (OS) on the network server. So, the problem is that your computer is trying to perform a Network PXE boot instead of booting into the storage device with the operating system. 

It indicates that either the storage device is not the highest priority boot device or the computer could not find the OS on the storage device and moved on to the PXE Network as the next boot option.

Change Boot Order

First, you need to ensure that the storage device with the OS is the top boot priority device, not the PXE Network. This way your computer will boot into the OS device before any other media.

1. Power up or restart your computer. When you get to the manufacturer’s logo, press the BIOS key repeatedly to boot to BIOS. If you don’t know the particular key, refer to official sources.
2. Here, search for Boot Priority, Boot Order, or a related option.
   
3. Move the Storage drive containing the OS is to the first position on the priority list. The BIOS interface itself should tell you how to modify the list.
4. You can also remove the Network or PXE devices from the list or move them to the last.
5. Save the changes and exit BIOS.

Disable Network or PXE Boot

You can also disable the PXE Network boot altogether so that your computer never looks for this boot option regardless of where it is on the boot order list.

1. Get to the BIOS on your computer.
2. Look for an option such as IPv4 or IPv6 PXE Support, Network Boot, LAN PXE Boot. You will likely find it inside the Boot or Advanced tabs. 
3. Set the option to Disabled.
   
4. Save and Exit the BIOS/UEFI.

Check Storage Drive

You should also see if your computer is actually detecting the storage drive. In some BIOS setup utilities, you can check for it in the boot priority list itself. If not, you can see if the disk appears in the Main, Storage, or similar tabs.

If it is a SATA, NVMe, or M2 device, check the message next to these options.

Then, if you have a hardware diagnostic program that you can run from the pre-boot environment, you should check the storage drive’s health. Or, you can remove the storage drive from your computer and connect it to another computer to see if there are any issues with it. 

If the storage drive has no issues, it indicates some corrupt boot or operating system files. So you must repair these components.

But if there are some issues, you may have to replace it altogether and install a new OS on the new device.

Repair Boot Files

Depending on whether your storage disk operates in GPT (GUID Partition Table) or MBR (Master Boot Record), it stores the boot configuration files differently. So, you should check the disk type and then use the proper steps to repair the files.

1. First, create a USB Installation media on another PC or other device.
2. Then, boot into this media and open Command Prompt. 
   • Insert the USB drive into the computer with the error and power it up or restart it.
   • On a UEFI computer, you will get the press any key screen. So, press anything to boot into the USB flash drive. On an MBR system, you must first set the USB to the top of the boot priority list.
   • After you see the language preferences, press Shift + F10 to open Command Prompt.
3. First, enter the following commands to see if your disk is GPT or MBR.
   • diskpart
   • list disk
   • exit
     
4. If the GPT section shows ‘*’ for the disk, it is a GPT disk, and if not, it’s an MBR disk.
5. Then, enter the following commands below one by one and press Enter depending on whether your disk is GPT or MBR.
6. On GPT:
7. On MBR:
   • bootrec /fixmbr
   • bootrec /fixboot
   • bootrec /rebuildbcd
     
8. Exit the command prompt and restart Windows. Set the top boot priority to the OS device if necessary. 

Then, boot into the OS and see if you still encounter the above error. If you do, you need to recreate the boot files. 

1. Boot into the USB installation device and get to Command Prompt.
2. Enter the following commands according to your disk type.
3. For GPT:
   • diskpart
   • list disk
   • select disk X
   • list volume (note the OS drive letter corresponding to the Info “Boot” while also looking for the required FAT32 volume)
   • select volume X (replace X with FAT32 volume’s number)
   • assign letter = S:
   • exit
   • cd /d S:\EFI\Microsoft\Boot\
   • ren BCD BCD.bak
   • bcdboot C:\Windows /l en-us /s S: /f all (change C: to your OS drive letter, and S: to whichever letter you chose previously.)
   • bootrec /rebuildbcd
     
4. For MBR:
   • diskpart
   • list disk
   • select disk X
   • list volume (note the volume number in which the Info is ‘System’. Also, look for the OS drive letter, i.e., in which Info says ‘Boot’. Here, we use C:)
   • select volume X (replace X with the above number)
   • assign letter = S:
   • exit
   • bootrec /fixmbr
   • bcdboot C:\Windows /s S: (replace C: and S: appropriately.)
     

If repairing boot files doesn’t work, your only alternative is to completely refresh your computer by clean installing the operating system. First, back up all necessary data by connecting the storage drive to another computer.