Ошибка checking file system on c

Полагаю, многие сталкивались с ошибкой Checking file system on C (перевод: «Проверка файловой системы на [диске] C») при запуске Windows 7 (или с Checking file system on D). Она обычно случается после сбоя в работе операционной системы. Когда она намертво виснет, многие просто вытягивают из розетки кабель питания или зажимают кнопку включения для принудительного выключения. После повторной загрузки может появиться соответствующий экран с «заветной» надписью (на фото ниже): «Checking file system on C…» — что это и что делать?

«Checking file system on C…» — эта надпись означает, что Microsoft не советует принудительно выключать питание компьютера — это может нанести вред всему ему в целом, а также жестким дискам в частности. Более того, данный процесс может испортить важные файлы, которые используются для нормальной загрузки операционной системы.

Это нормально, если сообщение Checking file system on C при запуске Windows 7 появляется один раз — как раз после описанных выше инцидентов. Тем не менее, некоторые пользователи отмечают, что эта проверка появляется снова и снова — каждый раз при перезагрузке операционной системы. Это отнимает массу времени и просто тратит нервы, но у данной проблемы есть достаточно простое решение.

Что делать при появлении этой ошибки? Для начала нужно проверить диск C на наличие ошибок

Если сообщение Checking file system on C появляется каждый раз при запуске Windows 7, для начала нужно разобраться, если ли ошибки на диске.

Во-первых, нужно проверить ошибки файловой системы

Шаг 1. Откройте «Проводник» и найдите диск C. Запустите контекстное меню нажатием правой кнопки по значку диска и выберите пункт «Свойства».

Шаг 2. Перейдите на вкладку «Инструменты» и нажмите на кнопку «Проверить».

Шаг 3. Переведите в активное положение переключатель «Исправлять ошибки файловой системы автоматически» и нажмите на кнопку «Пуск».

Во-вторых, следует проверить диск C на битые сектора

Если на диске C нет ошибок файловой системы, следует проверить поврежденные сектора. В этом, к примеру, я буду использовать приложение AOMEI Partition Assistant Professional — это удобный инструмент для управления жесткими дисками. Но у него есть аналоги: WinDFT, Seagate Seatools, Victoria.

Шаг 1. Установите и запустите приложение AOMEI Partition Assistant. Откройте контекстное меню диска C, перейдите в пункт «Расширенный» и выберите возможность «Проверить раздел».

Шаг 2. Выберите способ проверки ошибок для выполнения «Проверить на наличие плохих секторов на разделе» и нажмите на кнопку OK.

Шаг 3. Нажмите на кнопку «Старт», чтобы начать проверку.

Примечания:

• Если утилита найдет поврежденные сектора, нужно создать резервную копию диска C. Если в поврежденных секторах есть важные данные, отправьте накопитель в профессиональный центр восстановления данных. Браться за этот процесс самостоятельно не стоит — велик риск навсегда лишиться важной информации.
• Учитывайте, что не все поврежденные сектора могут быть восстановлены, поэтому лучше всего приучите себя создавать резервные копии хранилища по расписанию.

Теперь можно безопасно остановить проверку файловой системы

После проверки диска С на ошибки, вы должны задаться вопросом, как остановить этот процесс при каждом запуске операционной системы Windows 7. Вот два эффективных решения, которые для этого можно использовать.

Во-первых, для этого можно использовать редактор реестра

Шаг 1. Воспользуйтесь сочетание клавиш Windows + R, чтобы открыть диалоговое окно «Выполнить». Введите название приложения regedit и нажмите на клавишу Enter или кнопку OK, чтобы открыть редактор реестра.

Шаг 2. Используйте левую панель данного приложения, чтобы перейти в следующий каталог:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Шаг 3. Откройте файл BootExecute из правой части данного приложения.

Шаг 4. Добавьте значение /K:C в поле ключа перед значком *. Нажмите на кнопку OK, чтобы применить изменение.

Примечания:

• * — этот значок говорит о том, что каждый диск проверяется на согласованность.
• Ключ /K отключает проверку диска при запуске Windows — в данном случае он имеет отношение к диску C.

Шаг 5. Закройте редактор реестра.

Во-вторых, для этого можно использовать «Планировщик заданий»

Шаг 1. Нажмите на кнопку «Пуск» и перейдите в «Панель управления», разверните меню «Система и безопасность» и откройте раздел «Администрирование».

Шаг 2. Откройте «Планировщик заданий». Выберите пункт Autochk и нажмите на кнопку «Отключить» в правой панели.

Вывод

В общем, справиться с ошибкой Checking file system on C при запуске Windows 7 достаточно просто. Для начала нужно проверить диск С на ошибки и битые сектора, а после этого можно избавляться от соответствующей проверки с помощью редактора реестра или «Планировщика заданий».

Problem with PC Startup: Checking File System on C

Have you encountered the issue of checking the file system on C at startup? Many users often face this issue, which leads to system crashes. So, you must carefully shut down the PC by pressing the power button or unplugging the power cable. After restarting your Windows PC, the interface shows this error: «checking file system on C.» This error on Windows computers will jeopardize its hard drives when you power on or off directly.

What’s more? This error message damages PC’s the data and disables usual booting. However, it would be natural when checking the file system on C operates one time. But if you find out the issue happens every time you boot your PC, you must stop checking the C file system. This problem is scary! But you can fix checking file system on C with these methods.

You should know the causes of the Checking File System on C error to understand how to fix them. So, when you encounter this issue, fixing the checking file system on C is an absolute thing to do!

Here are the 3 reasons below why the users see the onscreen error message:

Reason 1. Power outage causes the error message

If your Windows PC turns off due to an interruption in the electricity supply, the «checking file system on C» error can appear after restarting it. However, as a power outage is planned, it could stem from an equipment failure, natural weather conditions, and others.

Reason 2. File system damage

Another probable reason for checking the file system on C on Windows is the file system damage. This is how you can contain the file system errors:

Step 1. Double-click the «Computer» icon and search for C drive on the desktop. Once done, «Properties» need to be selected after right-clicking C drive.

Step 2. Click the «tools» option and the «check now» button.

Step 3. A pop-up window will open, where you need to tick before «Fix the system errors automatically» and opt for the «start» button.

Reason 3. Bad sectors

A bad sector is a hard disc on a computer that has been corrupted and can no longer store or retrieve data. Check for faulty sectors if the C disc has no file system issues. The ideal option is to perform the task in a convenient, all-inclusive, complex disc management program, and it only takes a few clicks to use it to check for faulty sectors quickly. An outstanding program will provide capabilities like partition alignment and partition cleaning in addition to erroneous sector checks.

4 Solutions to Fix Checking File System on C on Windows 7/8/10/11

If you want to fix the checking file system on C, follow the top 4 solutions mentioned below:

Do you want to eliminate the checking file system on the C issue on Windows PC? If yes, you can disable Autochk.exe software from the scheduled tasks list. These are the steps below:

Method 1. Using Control Panel

Step 1. Hit the start button and then Control Panel. Under Control Panel, you need to click «system and security» and «Administrative Tools.»

Step 2. «Task Scheduler» needs to be double-clicked at this step. Afterward, you need to search for Autochk in the pop-up window and click it. Opt for «Disable» from the right-side panel.

Method 2. Check the Session Manager Registry Entry

You can fix Checking File System on C on Windows 7/8/10/11 after disabling the automatic checking file system on C through the registry editor. The steps are the following:

Step 1. You need to open the Run dialogue by pressing Windows Key + R. After that; you need to type Regedit and hit Enter button or click «OK» to open the Registry editor.

Step 2. To move to the following path, expand the entries in the left-hand pane:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 3. Double-click on BootExecute, located in the right-hand pane.

Step 4: You can change the key’s default value in the pop-up window by incorporating /K:C at the end before. Once done, click «OK» to confirm your changes.

Step 5: You should shut down the «Registry Editor.»

Method 3. Disable the automatic checking file system on C through the registry.

Follow the steps below to disable the automatic checking file system on C through the registry:

Step 1: Hit the start button, and in the search box, type «Regedit.«

Step 2: You must rummage for this registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 3: Double-click on BootExecute in the right-hand pane.

Here, autochk or autocheck is the key’s default value, which means every drive is verified for consistency. Simply put /K:C before * to turn off autocheck on the C: disc when Windows starts. Thus, the final value should seem as follows: autocheck autochk /k:C *

If you would love to incorporate more drives, the key must look like this: autocheck autochk /k:C /k:D * after disabling C and D drives.

Lastly, replace the key with the default key to return everything to its default state, which is autochk autocheck*

Method 4. Run CHKDSK to file Windows file errors

You may check where this «checking file system on C» error is located on the disk to get them fixed. However, you can run the CHKDSK check to fix Windows file errors. The steps are shown below:

Step 1. Windows + X and Command Prompt (Admin) must be pressed together.

Step 2. Press «Enter» right after typing «chkdsk /f c:».

Step 3. Don’t forget to type in «chkdsk C: /r«.

Following these, you can check to see if the problem has been resolved. Don’t give up if it doesn’t work; there are other options.

Further Solution: Recover Data When the File System Corrupts

Sometimes, especially after inspecting the faulty file system, files may disappear after executing SFC and CHKDSK. Additionally, there is a significant chance of data loss. Therefore, users should prioritize data security. A specialist data recovery program can be helpful for Windows users.

You can download the effective data recovery program EaseUS Data Recovery Wizard. It was created to aid in the recovery of data lost as a result of a file system malfunction, system crashes, and accidental file deletion.

Final Thoughts

With the help of the solutions above, you can quickly stop checking the file system on C error on your Windows 7/8/10/11 PC. But despite all your answers, there’s a risk of data loss! To save your files from getting permanently deleted from your PC, it’s essential to have premium data recovery software to retrieve files. EaseUS Data Recovery Wizard is the best option since it helps you reduce disk space with several features.

Fix Checking File System on C FAQs

Consider the FAQs mentioned below to obtain a profound understanding of the topic:

1. How do I know if FAT32 or NTFS?

To determine if the file system is FAT32, exFAT or NTFS, you need to open «My Computer or PC,» right-click the drive you want to see, and opt for «Properties.» The file system format will be listed in the Disk Properties window.

2. How to stop checking the file systems on c Windows XP?

Select Run from the Start menu, enter regedit and select OK. Find the following key in the registry, and then click it:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\BootExecute. Click Modify on the Edit menu. After entering autocheck autochk, hit ENTER.

3. How to disable disk check Windows 7 startup?

One of the easiest ways to disable disk check on Windows 7 startup is to utilize the chkntfs command. You must hit the «Start» button and type «command prompt.» Once right-clicking on the command prompt, you need to opt for «Run as Administrator.»

4. How to fix checking the file system on C Windows 7 every boot?

Follow the steps below:

1. Step 1. On the Windows 7 desktop, you must double-click the «Computer» icon and search for C drive. After that, «Properties» need to be chosen after right-clicking the C drive.
2. Step 2. Hit the «Tools» tab and, after that «check now» button.
3. Step 3. Select «Automatically resolve file system faults» and click «Start» in the pop-up window.

5. How long does checking the file system on C take?

Checking the file system on C usually takes over 2 hours based on your drive’s size and the errors discovered.

Do you receive a black screen with such an error message saying that checking file system on C: when trying to boot your computer? If you have no idea what happened, then you have come to the right spot. In this guide on MiniTool Website, we will show you the causes and solutions on it.

Checking Files System on C

It is very common to encounter some problems when booting your computer. Checking your file system on C is one of the troublesome issues you might face and it can even lead to system crashes sometimes. Here is the complete information you might receive:

Checking files system on C:

The type of the file system is NTFS.

Volume label is LOCALDISK.

One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.

Windows will now check the disk.

To stop disk checking, press any key within xx seconds.

This autodisk check process will be initiated when your computer was not shut down correctly or if something went wrong at the last shutdown. Most of the time, it might be a routine to check the consistency of the hard drive, so you don’t need to worry about it. However, if checking file system on C the type of the file system is NTFS appears whenever the computer boots, you are supposed to figure out the reasons. Here, we have collected several potential reasons for you.

Cause 1: Incorrect Shutdown

If your Windows device shuts down suddenly due to some unexpected factors such as power outage, equipment failure and more, the checking file system on C screen will crop up after restarting it. At the same time, you might also receive this error when removing a USB flash drive improperly, for example, unplugging the USB drive directly while it is saving data without hitting the Safely Remove button.

Cause 2: Corrupted File System

Another possible reason for checking file system on C is file system corruption. If this is the case, the file, directory and disk structure will also be corrupted and unreadable.

Cause 3: Bad Sectors

Maybe there are some bad sectors on the hard disk hence leading to the occurrence of checking file system on C. A bad sector refers to an area of the storage device that is damaged permanently. Once the sector is corrupted, all the data on it may lose and it is unable to store data anymore.

How to Fix Checking Files System on C on Windows 7/8/10/11?

In view of different conditions, we will show you the corresponding solutions to get rid of checking file system on C.

Shut Down Your Computer Properly

Here are some tips on how to shut down your computer properly:

• Don’t press the physical power button directly to turn off your computer.
• Avoid running too many programs at the same time, or else it might arouse an accidental shutdown or system crash.
• Make sure to terminate all the running programs before powering off.
• Remove your USB drive until it completes the task by hitting Safe Remove.

Check File System Errors

Microsoft provides you with an inbuilt disk check utility to help you find and fix the file system errors. Even if some errors are hard to handle, it will show you detailed error information.

Step 1. Press Win + E at the same time to evoke File Explorer.

Step 2. Click on This PC and right-click on Local Disk (C:) to select Properties in the drop-down menu.

Step 3. Under the Tools tab, tap on Check. (In Windows 7, hit Check now.)

Step 4. Click on Scan drive to start the scanning. (In Windows 7, check the Fix the system errors automatically option and press Start.)

Find and Fix Bad Sectors

If there are bad sectors on the hard drive, you may be also stuck in Checking file system on C when the computer boots up. In this condition, CHKDSK will help you out. This is an inbuilt tool in Windows which enables you to check & fix disk for errors such as bad sectors, cross-linked files, lost clusters, and directory problems.  Here’s how to get rid of checking file system on C NTFS with it:

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 1. Type cmd in the search bar to locate Command Prompt and right-click on it to choose Run as administrator.

Step 2. Type chkdsk /f/c: and hit Enter. The /f parameter means to find and fix any errors on the hard disk.

Step 3. After the process is complete, type chkdsk C: /r and hit Enter. The /r parameter can help you to detect & locate the bad sectors on the target disk, and even attempt to recover the readable information from the bad sectors.

Step 4. Now, reboot your computer to see if checking file system on C disappears.

Stop Autodisk Check Manaully

After fixing file system errors and bad sectors on your computer, you may not receive checking file system on C again. If you are afraid to get this error message, you can disable autodisk check manually. There are 3 ways for you to choose from: via Registry Editor, Control Panel, and Command Prompt.

# Way 1: Modify the Registry

First, you can stop the autocheck on C drive by modifying the registry on Registry Editor.

Step 1. Press the Win key + R to launch the Run dialog.

Step 2. Type regedit and hit the Enter key to open Registry Editor. If prompted by User Account Control, click on Yes to grant the permission.

Step 3. Move to the following path and expand the entries on the left-hand pane:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 4. Find BootExecute in the right-hand panel and right-click on it to choose Modify in the drop-down menu.

Step 5. Under Value data, type /K:C before * to disable checking file system on C and press OK to confirm this action.

Step 6. Quit Registry Editor.

# Way 2: Disable Autochk via Administrative Tools

Another option is to disable Autochk from the scheduled tasks list. Here’s how to disable checking file system on C via Task Scheduler.

Step 1. Hit the Start icon and go to Control Panel.

Step 2. Click on System and Security and then scroll down to hit Administrative Tools.

Step 3. Find Task Scheduler and double-click on it. Expand the following folders: Task Scheduler Library > Microsoft > Windows.

Step 4. Find Autochk and double-click on it to choose Disable from the right-hand pane.

# Way 3: Run CHKNTFS in Command Prompt

CHKNTFS, also known as check NTFS, is a windows command line that displays or modifies automatic disk checking when the computer is started. Here’s how to remove checking file system on C via it:

Step 1. Run Command Prompt as an administrator.

Step 2. Type chkntfs /x c: and hit Enter.

I was stuck on the checking file system on C black screen whenever the computer boots up. Luckily, I manage to fix it and boot my PC without any errors. If you have the same issue as well, try these solutions in this guide!Click to Tweet

Suggestion: Back up Your C Drive Before Proceeding

Now, your computer can boot up without checking files system on C. As you can see, it is hard to find the specific reason why your computer goes wrong most of the time, let alone the corresponding workarounds. Therefore, it is essential to create a backup of your system so that if anything goes wrong during the process, you can use the backup to restore the system back to the work state. Here, we propose to back up your system with a piece of reliable backup software – MiniTool ShadowMaker.

This free tool is designed to provide data protection and disaster recovery solutions for Windows devices. It supports backing up your important files/folders, selected partitions, operating systems, and even the whole disk on Windows 7/8/10/11 and Windows Server 2008/2012/2016/2019/2022. What’s more, MiniTool ShadowMaker is user-friendly and you can just back up your data just within a few steps. Here’s how to back up your C drive with its one-click system backup solution:

Step 1. Download, install and launch this program.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 2. Click on Keep Trial and go to the Backup page.

Step 3. In SOURCE, you can see the system required partitions are selected by default. Therefore, you only need to choose a storage path for your backup image in DESTINATION.

Step 4. Either hit Back Up Now to start the backup or press Back Up Later to delay the process. Once you choose Back Up Later, you can start the delayed task in the Manage page.

Then, you need to create a bootable drive with MiniTool ShadowMaker:

Step 1. Go to the Tools page and hit Media Builder.

Step 2. Click WinPE-based media with MiniTool plug-in and choose USB Flash Disk. When your computer fails to boot, you can boot it from this USB drive and perform a system recovery.

We Need Your Voice

By now, you must stop checking files system on C successfully with the solutions mentioned in this article. More importantly, you still have a risk of encountering the same issue again or making some mistakes during the troubleshooting process, resulting in data loss, hard drive failure or system crash.

In consequence, it is necessary to back up your system with MiniTool ShadowMaker to secure your system. For further queries about our product or the solutions in this article, welcome to leave your ideas in the comment zone or contact us via [email protected].

Checking Files System on C FAQ

Наверное, не нужно говорить, что большинство пользователей компьютерных систем очень часто при перезагрузке терминала или ноутбука сталкивались с появлением сообщения «Checking file system on C». Попробуем разобраться, что это такое и как его отключить.

Что собой представляет строка с сообщением «Checking file system on C»?

Сразу скажем, не стоит пугаться. Ничего страшного в сообщении «Checking file system on C» нет. Это стандартный процесс проверки целостности операционной системы и диска C на наличие ошибок при загрузке компьютера. Такая надпись возникает после подтверждения запроса о том, что один или несколько дисков требуют проверки («One of discs needs to be checked for consistency»).

Когда нажимается клавиша ввода, и стартует данный процесс. К сожалению, очень многие пользователи игнорируют проверку, что имеет негативные последствия. Достаточно часто подобное сообщение может возникать при перезагрузке снова и снова, иногда игнорирование проверки вообще может привести к полному крашу системы.

Почему запускается проверка диска

Если говорить о причинах запроса на проверку диска (дисков), то наиболее вероятными являются: внезапное отключение электропитания, некорректное завершение работы (принудительное выключение компьютерной системы), зависание компьютера, появление синего «окна смерти» (Memory Dump) и т. д.

Попробуем разобраться, что нужно сделать, чтобы избежать проверки диска при перезагрузке или повторном включении компьютера.

Стандартные способы проверки дисков и разделов

Прежде всего не стоит отменять проверку, сколько бы по времени она ни длилась. В данном случае ОС Windows исправляет системные ошибки автоматически. Если же по каким-либо причинам проверку завершить не удается, следует запустить ее уже после полной загрузки системы.

Для этого в обычном «Проводнике» нужно правым кликом на литере диска, который проверялся при старте, вызвать контекстное меню и выбрать строку «Свойства». На вкладке «Сервис» (для Windows 7) имеется кнопка «Выполнить проверку». После ее нажатия в возникшем окне следует задействовать параметр «Исправлять ошибки автоматически» и начать процесс. В большинстве случаев это помогает. Однако бывают и ситуации, когда сбои в работе системы достаточно серьезны или сам винчестер поврежден, а сообщение появляется снова и снова.

Что делать, если строка с сообщением «Checking file system» появляется при каждой загрузке

В данном случае имеется несколько решений. Для начала стоит проверить диск какой-нибудь сторонней утилитой, в которой имеется функция сканирования поверхности диска и автоматического исправления (восстановления) поврежденных секторов. Программ для этого существует достаточно много. Среди лучших можно выделить приложение Victoria и HDD Regenerator. Последняя утилита, кстати, способна восстанавливать даже физически поврежденные секторы.

Можно использовать и другие методы. Одной из самых простых методик является исполнение в командной строке или в меню «Выполнить» команды chkdsk c: /f, chkdsk c: /f /r или chkdsk c: /f /v /r /x. Система выдаст уведомление о том, что используется системой и проверка невозможна. Ничего страшного. Жмем Enter и ждем завершения процесса. При вводе второй команды проверка будет производиться несколько дольше. На некоторых машинах она может занимать до нескольких часов. Но если не хотите переустанавливать систему, лучше подождать.

К примеру, если запускается процесс «Checking file system on D» (для диска D) также можно использовать команду chkntfs x/ c:, но только для дисков и разделов с файловой системой NTFS. Наверное, и так понятно, что к файловым системам типа FAT32 такая команда не применима.

В крайнем случае, чтобы убрать постоянно возникающее сообщение о проверке «Checking file system on C», можно зайти в системный реестр HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager, найти там параметр BootExecute и изменить его значение с установленного на стандартное, устанавливаемое по умолчанию autocheck autochk*. Но неопытным пользователям заниматься редактированием реестра крайне не рекомендуется. Это может вывести из строя всю систему.

Like many other users, you may also receive the “checking file system on C” error. Then you come to the right place. MiniTool Partition Wizard summarizes possible reasons for the computer checking file system on C issue and tells you how to stop it.

It’s natural that checking file system on C runs only once. However, it would be troublesome if it runs every time when you boot your PC. Sometimes, it even leads to system crashes. The complete information for this error is shown as follows.

“Checking file system on C: the type of the file system is NTFS. Volume label is LOCALDISK. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. To stop disk checking, press any key within xx seconds.”

What causes this issue? The section below will illustrate that. Simply move on!

Causes for Check File System on C

Well, multiple factors can trigger it. When the PC is shut down suddenly or improperly, you will see “checking file system on C” on the screen after you restart the device. Due to unexpected reasons like a power outage and hardware failure, the computer may shut down all of a sudden.

You should turn off the computer in the right way. Don’t press the Power button or unplug the power cable to turn off the PC. Besides, you need to make sure that all the running programs are closed before you power off the device. Actually, you’d better not run too many programs simultaneously, or it will cause an accidental shutdown or system crash.

It’s also not recommended to remove your USB until it finishes the task. Improper PC shutdown will bring a series of consequences. According to Microsoft, it will do harm to PC’s hardware, especially hard drives, if you directly turn on or off power. Moreover, it damages computer data and system, leading to unnormal booting.

The corrupted or damaged file system is also responsible for the “computer checking file system on C” error. If the file system is corrupted, then the file, directory, and disk structure will be corrupted and unreadable. In this case, you can run a file system scan to detect and fix file system corruption and get rid of the issue.

Bad sectors on the hard drive will result in checking file system on C NTFS as well. Fortunately, you can locate bad sectors on the drive and recover any readable information by running CHKDSK commands.

How to Check the C Drive for Errors

Before you perform other operations to solve checking file system on C, manually check the C drive for errors first. Check if the C drive has file system errors or bad sectors by using MiniTool Partition Wizard. As a professional and reliable partition manager, it enables you to check hard drive errors effectively.

Get MiniTool Partition Wizard installed on your computer. To do that, download the software by clicking on the button below and then installing it by following the on-screen instructions. After that, refer to the steps below to check the C drive with the help of MiniTool Partition Wizard.

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

Step 1: Launch the software to access its main interface.

Step 2: Right-click on the C drive and then click Check File System. Alternatively, highlight the C drive and tap Check File System under the Check Partition section in the left panel.

Step 3: In the pop-up window, choose the “Check & fix detected errors” option and click Start to carry out the operation. After the process ends, any detected errors would be fixed.

Step 4: Then continue to scan the C drive to see if it includes bad sectors. For doing that, right-click on the C drive and tap on Surface Test.

Step 5: In the elevated window, click the Start Now button to execute the operation. Then MiniTool Partition Wizard will scan the C drive sector by sector to find bad sectors.

Once the scan process ends, you will see the complete result. If there are any blocks marked with red in the scan area, it means that the C drive contains bad sectors. Then refer to this bad sector repair guide to get them fixed. It is also available to run CHKDSK commands to locate bad sectors on the C drive and recover the readable information from the bad sectors.

To do that, follow these steps.

• Type cmd in the search box.
• Click the Run as administrator option on the right side of the window.
• In the prompted Command Prompt window, type chkdsk /f/c: and press Enter. Then this command will help you find and fix any errors on the hard disk.
• Type chkdsk C: /r and hit Enter.
• After the process ends, restart your PC to see if checking file system on C NTFS vanishes.

After checking and fixing errors on the C drive, try the following methods to stop checking file system on C NTFS if the issue still occurs.

Method 1: Disable Autochk via Control Panel

An effective way to get rid of checking file system on C is to stop autochk (auto disk check) through Control Panel. After you disable the autochk option, you won’t be stuck on the “computer checking file system on C” screen. Here’s the full tutorial for you.

Step 1: Open the Run dialog window by pressing Windows and R keys.

Step 2: Type control in the Run window and hit Enter.

Step 3: In the Control Panel window, click Administrative Tools.

Step 4: Then find and double-click the Task Scheduler option.

Step 5: Navigate to Autochk by double-clicking Task Scheduler (Local) > Task Scheduler Library > Microsoft > Windows. Then click the Disable option in the right panel.

Method 2: Change the Value of BootExecute in Registry Editor

You can also disable the automatic checking file system on C NTFS by modifying Registry Editor. To be specific, change the value of BootExecute to disable auto disk check.

Step 1: After opening the Run window, type regedit and click OK.

Step 2: Navigate to the destination by following the path below.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

Step 3: Double-click BootExecute in the right panel of the window.

Step 3: Change the default value of the key by adding /K:C at the end of “*”. Then click OK to save changes.

Step 4: Exit Registry Editor.

Method 3: Run CHKNTFS Command

CHKNTFS is known as check NTFS, which is a Windows command line displaying or changing automatic disk checking when the PC starts up. You can run it to remove the “checking file system on C: the type of the file system is NTFS” message.

Step 1: Run Command Prompt as administrator from the search box.

Step 2: In the Command Prompt window, type chkntfs /x c: and press Enter.

Further reading:

For the sake of your computer, it is strongly recommended to back up your Windows regularly. To do that, you can create a system image, create a system restore point, or clone the system disk via a piece of hard drive backup software.

As a professional backup tool, MiniTool ShadowMaker enables you to back up the file, folder, partition, disk, and the entire operating system. Its Backup feature allows you to make a Windows image backup, while its Clone Disk feature helps you clone the system disk with ease.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Based on your demands, choose a backup type. If you want, use the automatic backup service, advanced backup parameters, or three different backup schemes offered by MiniTool ShadowMaker. In addition to this program, MiniTool Partition Wizard is also helpful for cloning the system.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Depending on your needs, you can copy the whole system disk or just copy the system-required partitions to another disk via MiniTool Partition Wizard.

How to get rid of checking file system on C? If you are looking for the answer, this post is what you need. It lists possible reasons and available troubleshooting methods for the issue.Click to Tweet

Bottom Line

If the “checking file system on C: the type of the file system is NTFS” message keeps popping up, it is necessary to take some measures to stop it. Otherwise, it will take you more time to boot the device. What’s worse, it may result in system crash, hard drive failure, and data loss, which is troublesome. To get the issue solved successfully, you should know the possible causes of the issue.

Well, this post collects potential reasons for the computer checking file system on C error. Based on that, it provides you with some methods to fix the issue. If you have any better solutions to checking file system on C, you can share them with us by writing them down in the following comment area.

If you encounter any problems while using software made by MiniTool, please feel free to contact us by sending an email to [email protected]. We would appreciate it a lot if you can give us some useful advice.