Ошибка базы данных 1064

If you’ve been using WordPress for a while, you may have decided to get into more advanced database management. This often involves using the MySQL command line, which can, in turn, lead to confusing problems such as MySQL 1064 errors.

Fortunately, while resolving this error can be confusing at first due to its many potential causes, its solutions tend to be relatively simple. Once you determine the reason behind the database error you’re seeing, you should be able to fix it fairly quickly.

In this post, we’ll cover the various possible causes of the MySQL 1064 error. Then we’ll share solutions for each common situation, to help you get your database and your site back up and running.

Let’s get started!

Why the MySQL 1064 Error Occurs

The MySQL 1064 error is a syntax error. This means the reason there’s a problem is because MySQL doesn’t understand what you’re asking it to do. However, there are many different situations that can lead to this type of miscommunication between you and your database.

The simplest cause is that you’ve made a mistake while typing in a command and MySQL can’t understand your request. Alternatively, you may be attempting to use outdated or even obsolete commands that can’t be read.

In other cases, you may have attempted to include a ‘reserved word’ in one of your commands. Reserved words are terms that can only be used in specific contexts in MySQL. If you attempt to use them in other ways, you’ll be faced with an error.

It’s also possible that there is some data missing from your database. When you make a request via MySQL which references data that isn’t where it’s supposed to be, you’ll also see the 1064 error. Finally, transferring your WordPress database to another server can also lead to the same issue.

As you can see, there are many potential causes for this problem, which can make it tricky to resolve. Unless you’re in the process of moving your database or taking some other action that points to a specific cause, you’ll likely need to try a few different solutions before you land on the right one. Fortunately, none of them are too difficult to execute, as we’ll see next.

Oh no, you’re getting the MySQL 1064 Error…😭 Don’t despair! Here are 5 proven solutions to get it fixed immediately 🙏Click to Tweet

How to Fix the MySQL 1064 Error (5 Methods)

If you already have an idea of what’s causing your MySQL 1064 error, you can simply skip down to the resolution for your specific situation. However, if you’re not sure why the error has occurred, the simplest strategy is to try the easiest solution first.

In that case, we’d suggest testing out the five most likely fixes in the following order.

1. Correct Mistyped Commands

The good thing about MySQL typos is that they’re the simplest explanation for syntax issues such as the 1064 error. Unfortunately, they can also be the most tedious to correct. Generally speaking, your best option is to manually proofread your code and look for any mistakes you may have made.

We suggest using the MySQL Manual as a reference while you do so, double-checking anything you’re not sure about. As you might imagine, this can get pretty time-consuming, especially if you’ve been working in the MySQL command line for a while or if you’re new to this task.

An alternative to manually checking your work is to employ a tool such as EverSQL:

With this solution, you can simply input your MySQL to check for errors automatically. However, keep in mind that these platforms aren’t always perfect and you may still want to validate the results yourself.

2. Replace Obsolete Commands

As platforms grow and change, some commands that were useful in the past are replaced by more efficient ones. MySQL is no exception. If you’re working on your database following a recent update or have referenced an outdated source during your work, it’s possible that one or more of your commands are no longer valid.

You can check to see whether this is the case using the MySQL Reference Manual. You’ll find mentions of commands that have been made obsolete by each MySQL version in the relevant sections:

Once you’ve determined which command is likely causing the problem, you can simply use the ‘find and replace’ function to remove the obsolete command and add in the new version. For example, if you were using storage_engine and find that it no longer works, you could simply replace all instances with the new default_storage_engine command.

3. Designate Reserved Words

In MySQL, using a reserved word out of context will result in a syntax error, as it will be interpreted as incorrect. However, you can still use reserved words however you please by containing them within backticks, like this: `select`

Each version of MySQL has its own reserved words, which you can read up on in the MySQL Reference Manual. A quick find and replace should enable you to resolve this issue if you think it may be causing your 1064 error.

4. Add Missing Data

If your latest MySQL query attempts to reference information in a database and can’t find it, you’re obviously going to run into problems. In the event that none of the preceding solutions resolves your MySQL 1064 error, it may be time to go looking for missing data.

Unfortunately, this is another solution that can be quite tedious and has to be done by hand. The best thing you can do in this situation is to work backward, starting with your most recent query. Check each database it references, and make sure all the correct information is present. Then move on to the next most recent query, until you come to the one that’s missing some data.

5. Use Compatibility Mode to Transfer WordPress Databases

This final 1064 error solution isn’t as straightforward as the others on our list. However, if you’re migrating your WordPress site to a new host or otherwise moving it to a different server, you’ll need to take extra steps to avoid causing problems with your database.

The simplest solution is to use a migration plugin that includes a compatibility mode, such as WP Migrate DB:

This will enable an auto-detection feature that will make sure your latest site backup and database are compatible with multiple versions of MySQL. You can access the compatibility mode setting by navigating to Tools > Migrate DB > Advanced Options:

Check the box next to Compatible with older versions of MySQL before starting your site migration. This way, you should be able to avoid any issues during the process.

Summary

Database errors can throw a wrench in your plans, and may even compromise your website’s stability. Knowing how to resolve issues such as the MySQL 1064 error can help you react quickly, and minimize downtime on your site.

There are five methods you can try to fix the MySQL 1064 error when you encounter it, depending on its most likely cause:

1. Correct mistyped commands.
2. Replace obsolete commands.
3. Designate reserved words.
4. Add missing data.
5. Transfer WordPress databases in compatibility mode.

Have you ever encountered an SQL error 1064 while trying to execute a query? It can be frustrating, but don’t worry – you’re not alone. This error message typically marks a syntax error in your MySQL query.

Fortunately, there are only a handful of problems triggering that error. You can efficiently resolve them with a bit of persistence and proper guidance. In this article, we’ll explain what SQL Error 1064 is, what causes it, and how to resolve it. Plus, you’ll learn three tips to avoid it in the future.

You will likely see the SQL error code 1064 in a database administration tool like phpMyAdmin or MySQL Workbench. SiteGround users have phpMyAdmin at their disposal in Site Tools > Site > MySQL > PHPMYADMIN > ACCESS PHPMYADMIN.

Below, you can see a screenshot of phpMyAdmin producing the error.

There are several variants of the error message:

• error 1064 (42000) – you have an error in your SQL syntax
• #1064 – you have an error in your SQL syntax

This error message looks daunting, especially if you’re new to SQL. However, it’s essential to remember that syntax errors are common, and with some practice, you can learn to avoid them.

Understanding SQL Syntax

SQL syntax is a crucial aspect of database management. You can create, modify, and retrieve data from databases using correctly structured SQL commands.

SQL syntax is a set of rules that determine the structure of commands used to interact with a database. SQL commands include the following elements:

• operators,
• clauses,
• expressions,
• keywords.

The SQL syntax is similar to many other programming languages. While SQL keywords are not case-sensitive, writing them in uppercase is standard practice. SQL statements are typically separated by semicolons.

Familiarizing yourself with the MySQL Reference Manual is essential for working with a MySQL database. You will get a better understanding of the syntax, which in turn will help you avoid syntax errors in SQL queries.

What Causes SQL Error 1064?

As the description suggests, the main reason for the SQL error 1064 is a syntax error in your command. However, other problems can trigger the error, as well. Below, you’ll find a list of the most common ones.

• Syntax errors – The most common cause of SQL Error 1064. Syntax errors occur when the SQL statement is miswritten or violates the established syntax rules.
• Obsolete commands – Using outdated and deprecated commands or commands no longer supported in the current version of SQL.
• Using reserved words out of context – Reserved words are words already used by the SQL language for specific purposes. Examples are SELECT, INSERT, UPDATE, ALTER, DELETE, etc. If you use reserved words for a purpose outside of their designated use in your SQL code, you will encounter SQL Error 1064.
• Incorrect data types – Using incorrect data types in the SQL statement. Inserting text into a numeric field is a typical example.
• Missing data – If you try to insert or update data in a database missing a required field, the result could be an SQL error 1064.

How to Fix SQL Error 1064

The SQL syntax error can originate from various issues. Here is an order you can follow to find the source of the problem and solve it.

• Step 1.Read the Error Message Carefully

  When encountering an SQL Error 1064, read the error message carefully. It will indicate which line or section of the SQL statement contains a mistake.

  Below is an example of phpMyAdmin producing the error and pointing out which part is problematic.

  

• Step 2.Check Your MySQL Query for Syntax Errors

  Once you’ve identified the part of the SQL statement causing the error, check the SQL code for syntax errors. Look for missing brackets, commas, or misspelled operators, clauses, expressions, or keywords.

  The example from the previous step shows that the problematic part of the SQL command is:

  ''WERE `fpj_options`.`option_id` = 1' at line 1

  Looking closely at the line, it becomes clear that the issue comes from the misspelled “WERE” clause. Its proper form is “WHERE” so the missing “H” triggered the error. Correcting the clause results in a successful execution of the SQL command.

  

• Step 3.Check If You Are Using Reserved Words

  If you are using MySQL and receive an error message with the code 1064, it may be because you used words that MySQL considers special. These are called “reserved words,” and examples are ALTER, TABLE, SELECT, etc.

  Reserved words have specific meanings in MySQL. You can’t use them as names for tables, columns, or other parts of a MySQL database without causing errors. Below is an example of the SQL syntax error caused by using the reserved word alter as a table name.

  

  To prevent this error, check for any reserved words used out of place in your queries. You can find a complete list of these words in the MySQL manual. If you use a reserved word, change it to something else.

  If you prefer to use the reserved word, surround it with backticks (`). These backticks will instruct MySQL to treat it as a name and not a reserved word.

  

• Step 4.Replace Obsolete Commands

  MySQL has undergone several revisions and changes over the years. Some of these changes have affected the SQL syntax rules. Many of the commands have been abandoned and replaced by new ones.

  You can check the MySQL server version you are using in phpMyAdmin. For more information, read this guide on how to check the MySQL version on the server hosting your account.

  If you’ve identified that you’re using obsolete commands or no longer supported ones, replace them with up-to-date commands.

  For editing outdated commands in files, you can save time by using find and replace tools in your File manager. They can replace all the commands causing the issue with the correct new versions in one go.

  The File Manager in Site Tools offers this functionality for SiteGround users. Open the file you wish to edit, and press the button Replace.

  

  In the Find field, type the obsolete command that needs to be updated. In Replace, write the updated command to replace the old one. The tool will rewrite all instances of the outdated command with the new one.

  IMPORTANT! The new SQL command may not work as expected. Before making changes to the file, create a website backup. It will allow you to restore your website quickly in case the changes affect it negatively.

• Step 5.Check If You Are Using the Correct Data Type

  SQL databases are designed to store various data types. Each has its own specific format and storage requirements. For example, a numeric value requires a different amount of storage space than a string value.

  If you are trying to insert data of one type into a column of another type, you will encounter SQL Error 1064. This error message is usually accompanied by “You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near…”.

  For instance, if you insert a text string into a column defined as a numeric value, you will get SQL Error 1064.

  

  To avoid this database error, ensure that the data types of the columns in your SQL code match the data types of the values you are inserting.

• Step 6.Add Missing Data

  Another common cause of SQL Error 1064 is missing data. For example, if you try to insert data into a table with mandatory fields but leave some fields empty, you will get an SQL Error 1064.

  To fix this error, ensure you have provided all the required data. You may have to add the missing data manually.

  Furthermore, the error may appear when importing your database from a corrupted backup file. Create a new backup of your original database and import it on the new server again.

  SiteGround users can take advantage of the tool Import Database Dump, designed for importing larger databases.

  

  If unsure about the mandatory fields, check the table definition or consult the database administrator.

• Step 7.Seek Assistance

  If you have tried all the above steps and still can’t fix SQL Error 1064, try finding help.

  You can contact the database administrator or consult an online forum or community dedicated to SQL programming.

  Many online resources are available for beginners and experienced programmers alike, and you can find answers to most SQL-related questions. You can find helpful information in the official MySQL forum, where users aid each other with more elaborate problems and share their experiences.

3 Tips to Avoid SQL Error 1064

You can prevent SQL Error 1064 by following good practices that reduce the chance of making a syntax error.

Use an SQL Validator to Detect a Syntax Error

An SQL validator is a tool that checks the syntax of your SQL code and identifies errors. Using it lets you catch and fix errors early before executing the code.

EverSQL is one of the most popular free SQL validator tools. Submit your SQL query and press the button Validate SQL Syntax. The checker will inspect the code and point out potential mistakes in the MySQL queries.

Use SQL Aliases

SQL aliases allow you to assign a temporary name to a table or column. Using aliases, you can simplify your SQL code and avoid syntax errors caused by typos or ambiguities. Note that the SQL alias remains active only for the duration of the SQL query.

The clause AS enables an alias for a table or column. To assign an alias for a column, use the following template.

SELECT column_name AS alias_name
FROM table_name;

For assigning an alias to a table, use the format below.

SELECT column_name(s)
FROM table_name AS alias_name;

Replace column_name and table_name with the existing names in your database and alias_name – with your chosen custom alias.

Break Down SQL Statements

Breaking down complex SQL statements into smaller, manageable parts can help you easily identify errors. By testing smaller parts of your SQL code, you can isolate and fix errors before they cause significant problems.

Conclusion

SQL Error 1064 is a common error encountered by SQL programmers. Syntax errors, obsolete commands, incorrect data types, missing data, or other mistakes in the SQL code usually cause this error.

By following the steps outlined in this guide and implementing the tips to prevent MySQL Error 1064, you can avoid it and ensure your SQL code runs smoothly. Remember to always check for syntax errors and seek assistance when needed.

Дата: 25.11.2013

Автор: Василий Лукьянчиков , vl (at) sqlinfo (dot) ru

Статья ориентирована на новичков. В ней объясняется, что означает ошибка сервера MySQL №1064, рассматриваются типичные ситуации и причины возникновения этой ошибки, а также даются рекомендации по исправлению.

Рассмотрим простейший пример.

SELECT mid, time, title, artist, download, view_count, rating, vote_num FROM dle_mservice WHERE category = ‘1’ AND approve = ‘1’ ORDER BY time DESC LIMIT -10,10;
ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘-10,10’ at line 1

Сервер MySQL сообщает, что в первой строке нашего SQL запроса имеется синтаксическая ошибка, и в одинарных кавычках цитирует часть запроса с того места где начинается ошибка. Это очень полезное свойство, так как позволяет сразу определить место, которое сервер счел ошибочным. В данном случае это ‘-10,10’, ошибка возникает из-за того, что параметр LIMIT не может быть отрицательным числом.

Однако, бывает и так, что цитируемый кусок запроса не содержит синтаксической ошибки. Это означает, что данная часть запроса находится не на своем месте из-за чего весь запрос становится синтаксически неверным. Например, отсутствует разделитель между двумя запросами, пропущен кусок запроса, невидимый символ в дампе и т.д. Неудобством таких ситуаций является то, что сообщение об ошибке не содержит исходный запрос.
Действия по исправлению зависят от контекста возникновения ошибки. Таковых всего 3:

1. Запрос в редакторе.

Самый простейший случай — вы пишите свой запрос в редакторе. Если причина не опечатка, то:

• Смотреть в документации синтаксис команды для вашей версии сервера MySQL.
  

  Обратите внимание: речь идет о версии сервера MySQL, а не клиента (phpmyadmin, workbench и т.д.). Версию сервера можно узнать выполнив команду select version();

• В MySQL допускается использование ключевых слов в качестве имен столбцов/таблиц, но при этом их необходимо заключать в обратные кавычки (там где буква ё на клавиатуре).
  Пример:

  select order from test;
  ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘order from test’ at line 1
  MariaDB [test]> select `order` from test;
  +——-+
  | order |
  +——-+
  |  NULL |
  +——-+

• По умолчанию ; разделяет команды. Если же нужно выполнить набор из нескольких инструкций как одну команду (например, при создании процедур, фунуций, триггеров), то в зависимости от используемого клиента может потребоваться переопределить разделитель с помощью DELIMITER, иначе интерпретация команды остановится на первой ; и будет ошибка синтаксиса. Пример:

  delimiter //
  create procedure test()
  begin
  set @a=1;
  select @a;
  end//

  Обратите внимание: DELIMITER это команда консольного клиента mysql, необходимость его использования зависит от того как вы передаете команду серверу. Например,:

  • mysql_query() выполняет содержимое как одну команду, добавление delimiter приведет к error 1064 с цитатой, начинающейся со слова delimiter
  • phpmyadmin удаляет слово delimiter из-за чего возникает error 1064 с цитатой, начинающейся с переопределенного разделителя
  • в MysqlQueryBrowser напротив необходимо использовать delimiter.

2. Перенос базы на другой сервер.

У вас есть дамп (т.е. файл с расширением .sql) и при попытке его импортировать вы получаете ошибку 1064. Причины:

• В различных версиях набор ключевых слов и синтаксис может немного отличаться. Наиболее распространенный случай: команда create table, в которой ключевое слово type было заменено на engine. Например, если вы получаете ошибку:

  You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘TYPE=MyISAM CHARACTER SET `utf8`’ at line 29

  Это означает, что вы переносите базу в пятую версию сервера MySQL, в котором ключевое слово TYPE не поддерживается и его нужно заменить на ENGINE.

  Редко бываю случаи, когда перенос идет на старый (~3.23) сервер, который кодировки не поддерживает. Тогда ошибка будет иметь вид:

  #1064 — You have an error in your SQL syntax near ‘DEFAULT CHARACTER SET cp1251 COLLATE cp1251_general_ci’ at line 1

  Такое может произойти, если вы переносите базу с хостинга на локальный комп, где стоит древняя версия MySQL. Лучшим решением в данном случае будет не править дамп, а обновить MySQL.

• Часто проблемы вызваны тем, что дамп делается неродными средствами MySQL (например, phpmyadmin) из-за чего в нем могут быть BOM-маркер, собственный синтаксис комментариев, завершения команды и т.д. Кроме того при использовании того же phpmyadmin возможна ситуация при которой из-за ограничения апача на размер передаваемого файла команда будет обрезана, что приведет к ошибке 1064.
  Например, если вы получаете ошибку:

  #1064 — You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘
  CREATE TABLE `jos_banner` (
    `bid` int(11) NOT NULL auto_increment,
    `ci‘ at line 1

  Значит ваш дамп содержит BOM-маркер. Это три байта в начале файла, помогающие программе определить что данный файл сохранен в кодировке UTF-8. Проблема в том, что MySQL пытается интерпретировать их как команду из-за чего возникает ошибка синтаксиса. Нужно открыть дамп в текстовом редакторе (например, Notepad++) и сохранить без BOM.

  Для избежания подобных проблем при создании дампа и его импорте лучше пользоваться родными средствами MySQL, см http://sqlinfo.ru/forum/viewtopic.php?id=583

3. Некорректная работа сайта.

Если во время работы сайта появляются ошибки синтаксиса, то, как правило, причина в установке вами сомнительных модулей к вашей cms. Лучшее решение — отказаться от их использования. Еще лучше предварительно проверять их работу на резервной копии.

Пример. Движок dle 7.2, поставили модуль ,вроде бы все Ок, но:

В данном примере мы видим, что причина ошибки в отсутствии значения после «id != «

Обратите внимание: из процитированного сервером MySQL куска запроса причина ошибки не ясна. Если ваша CMS не показывает весь запрос целиком, то нужно в скриптах найти место где выполняется данный запрос и вывести его на экран командой echo.

Кусок кода, который отвечает за данный запрос это

$db->query («SELECT id, title, date, category, alt_name, flag FROM « . PREFIX . «_post WHERE MATCH (title, short_story, full_story, xfields, title) AGAINST (‘$body’) AND id != «.$row[‘id’].» AND approve=’1′».$where_date.» LIMIT «.$config[‘related_number’]);

Далее можно искать откуда взялась переменная $row и почему в ней нет элемента ‘id’ и вносить исправления, но лучше отказаться от использования такого модуля (неизвестно сколько сюрпризов он еще принесет).

P.S. Если после прочтения статьи ваш вопрос с MySQL Error 1064 остался нерешенным, то задавайте его на форуме SQLinfo

Дата публикации: 25.11.2013

© Все права на данную статью принадлежат порталу SQLInfo.ru. Перепечатка в интернет-изданиях разрешается только с указанием автора и прямой ссылки на оригинальную статью. Перепечатка в бумажных изданиях допускается только с разрешения редакции.

I keep getting this error:

MySQL said: #1064 — You have an error
in your SQL syntax; check the manual
that corresponds to your MySQL server
version for the right syntax to use
near ‘INSERT INTO
books.book(isbn10,isbn13,title,edition,author_f_name,author_m_na’
at line 15

with this query:

USE books;

DROP TABLE IF EXISTS book;


    CREATE TABLE `books`.`book`(
    `book_id` INT UNSIGNED NOT NULL AUTO_INCREMENT PRIMARY KEY,
    `isbn10` VARCHAR(15) NOT NULL,
    `isbn13` VARCHAR(15) NOT NULL,
    `title` VARCHAR(50) NOT NULL,
    `edition` VARCHAR(50) NOT NULL,
    `author_f_name` VARCHAR(50) NOT NULL,
    `author_m_name` VARCHAR(50) NOT NULL,
    `author_l_name` VARCHAR(50) NOT NULL,
    `cond` ENUM('as new','very good','good','fair','poor') NOT NULL,
    `price` DECIMAL(8,2) NOT NULL,
    `genre` VARCHAR(50) NOT NULL,
    `quantity` INT NOT NULL)

    INSERT INTO books.book(isbn10,isbn13,title,edition,author_f_name,author_m_name,author_l_name,cond,price,genre,quantity)** 
    VALUES ('0136061699','978-0136061694','Software Engineering: Theory and Practice','4','Shari','Lawrence','Pfleeger','very good','50','Computing','2');

Any idea what the problem is?

Read time 5 minutes

At first, the syntax errors seem very tedious and cryptic while working with SQL database programs. But, at a closer glance, one can easily understand the errors as they are descriptive enough about the problem that finding possible solutions becomes a step easier. Every error code has a unique 4 digits number that determines the type of error. One such SQL error code is Error: 1064 which occurs due to wrongly typed syntax of SQL queries. Let’s dig deep to know more about this error and how to fix it.

The error message with error code 1064 occurs due to the incorrect syntax of MySQL queries. In simple words, MySQL does not understand the commands that you have written. The commands are mistyped or misspelled within the MySQL environment which the database does not recognize. Say for example UPDATE is typed as UPADTE. Also, don’t get confused between syntax error and grammar error, because grammar rules are valid for a syntax error. The parser disagrees to understand the command and fails to perform a task.

Reasons for MySQL Syntax Error: 1064

The possible reasons due to which MySQL faces syntax error – 1064 are mentioned here:

• It can occur due to mistyping the spelling of command.
• The error can take place due to the use of outdated or depreciated commands.
• It may happen when the specific data required by the query goes missing.
• Due to wrong reserved words typed as they vary from version to version in MySQL.
• This occurs due to a mistake in the spelling of the command resulting in MySQL not being able to understand it.
• The error can take place due to the use of outdated or obsolete commands which are no longer in function.
• It may happen when some data goes missing in the written database.
• Due to wrong reserved words typed as they vary from version to version in MySQL. Reserve words are used for specific context only.

How to Resolve Syntax Error: 1064?

When any MySQL error occurs, it indicates the problem along with a description and the way to fix it. Hence, for different syntax errors, it shows different fix solutions. Some of them are mentioned here, follow them according to the syntax error that is troubling you:

Fix 1: Mistyped Commands

The foremost reason due to which 1064 error occurs when you type incorrect spelling of a command or typos.

Example: UDPATE table emp set id = 0;
The UPDATE command is mistyped.

Solution to Fix

To fix the spelling errors mistyped commands and typos you must recheck before executing them. In case, you are unable to recall the correct syntax; we advise you to refer MySQL Manual and search for the syntax for the version you’re using. The error will get resolved if you replace all the typos and mistyped commands with the correct syntax.

You can also try IDEs and MySQL tools that help you with MySQL syntax errors by highlighting or pop-up alerts when you execute the query. If the IDE that you installed is lacking the feature of detecting syntax errors, look for a plugin that is designed for this purpose to debug the issue.

Fix 2: Reserved Words

Reserved words vary from one MySQL version to another as every version has its list of keywords that are reserved. The reserved words are for performing a specific task and are used for different purposes in the MySQL database engine. The error 1064 might pop up in cases when you are not using the right keyword meant for serving the specific function, or the version of MySQL is not meeting the exact requirements for using the particular keyword.

For example, Create Table alter (name, id);

Here, alter is a reserved word, but it cannot be used as it needs some special requirements. Let’s know how to use a reserved keyword in a query.

Solution to Fix

To use alter in MySQL query as you need to fulfill the unique requirements to call the functionality of the alter command, you cannot use it as mentioned above. You need to enclose the alter word with backticks (`), present on your keyboard just above the Tab button.`

For example: Create Table `alter` (name, id);

Fix 3: Missing Data

At times, the relevant data goes missing from the database which is required for the execution of a query. Hence, leading to 1064 error when the data is not found in the database.

For example: Select * from students where studentID = $id

Suppose if the $id not correctly filled, the above query for the server is like this:

Select * from students where studentID =
That is the reason the server pops up error 1064 because it gets confused.
Solution to Fix

You can enter the missing data using the dashboard interface of the application, which is usually done through phpMyAdmin or MySQL Workbench. The applications allow you to bring up the record and add the missing data manually to an appropriate row of the table.

Recommended: Automated Solution to Fix MySQL Database Errors

At times, the error 1064 becomes a bit tricky to resolve as it might occur due to the corruption of database files, i.e., MyIASM, .cnf, .ddl, .arm, etc. If that is the case, then you must use the professional automated solution to recover and restore database files of any MySQL server version. The best-recommended solution is the Kernel for MySQL Database recovery. The solution is highly efficient and works immediately to resolve problems caused by MySQL database files.

Concluding Words

The error 1064 seems simple to remove if you are aware of the exact cause behind the error. The manual solution may not work correctly if you do not use the correct steps to eliminate the error. You should use Kernel SQL Database Recovery software to handle each kind of error, whether physical or logical. The software will recover the complete databases with their tables, relationships, and dependencies.