При первом торможении на Российской снежной земле на летней резине, сработала абс, далее загорелась ошибка абс и восклицательный знак на табло. Путём различных манипуляций проблема не ушла, сканер показал зависание щёток на эл.моторе абс, из за этого авто-стоп не работал. Проездив так месяц, купил блок абс 1000 рублей, замена 1000 рублей. И наконец-то все стало в норме, ошибки ушли авто-стоп работает. Также установили сигнализацию и зимнюю резину. Заменил первый раз после Японии масло, Molly green earth 0-20w.
Your Honda Insight’s ABS Light comes on when it fails a self-diagnostic cycle. When on, it indicates that your car does not have Anti-Lock brakes and the safety they provide.
Your Insight’s ABS system uses a system of sensors to determine wheel speed when braking. If one of the wheels starts to lock up, it’ll apply the maximum amount of brake to that wheel to keep it from sliding.
Not all scanners pick up ABS codes. A scanner that can read them is vital to diagnosing why your Honda Insight’s ABS light is on.
Honda Insight ABS Light On Causes
A good code scanner will often tell you which part of the ABS system failed. Not every OBDII scanner will give up this information. A good one will. Most auto parts stores will have a free scanning service they would gladly let you utilize.
Here are the five most common reasons the ABS Honda Insight’s ABS light comes on:
1. Wheel Speed Sensor
A bad wheel speed sensor is the most common reason the ABS light comes on.
There is a wheel speed sensor on each of your Honda Insight’s hubs. Wheel speed sensors monitor the rotational speed of each wheel and send it back to the ABS module.
If one of the wheels is moving slower than the others, the ABS module recognizes that it is about to lock up. It reduces brake pressure on that particular wheel to keep it from doing so.
When the wheel speed sensor no longer sends a signal to your Insight’s ABS system (or the voltage value is out of range), the ABS light will be activated.
Your Insight’s stability assist shouldn’t be working if there’s a wheel speed sensor problem.
2. ABS Module or Pump
The only sign of an ABS module problem should be a trouble code.
The ABS module controls the antilock brake system. If it becomes damaged and can no longer control all four brakes, the ABS light will activate.
The ABS pump can reduce the brake pressure at each wheel, which keeps them from locking up.
Typically, corrosion is the most common reason why the ABS module fails.
3. Low Brake Fluid
The brake warning light should also be on. There may be a squishy pedal.
Start here if your brake warning light is on. It’s not as simple as pouring more fluid in. You’ll need to determine how the fluid got out and repair the leak.
If the fluid reservoir level is too low to keep pressure in the ABS lines, the ABS light will come on. Without the proper pressure, the ABS system will no longer be able to activate physically.
4. Low Tire Pressure
Appears with the low tire pressure light.
Extremely low tire pressure can cause your Insight’s ABS light to come on. When the tire pressure gets low, it effectively reduces the diameter of the wheel and tire combination. Inflating the tires can get you back on the road.
5. ABS Fuse
If the fuse/relay to the ABS module has blown, the ABS light will activate. To find its location, you’ll need to reference the owner’s manual for your Insight’s model year and engine combination.
If the ABS light is on, the PCM will have a related code stored in its memory. That’s the starting point for diagnosing an ABS light in the Honda Insight.
Scan Your Insight for Brake System Codes
Brake system trouble codes will tell you what part of the brake system needs to be addressed. Here are some of the most common ones.
- C0128- Low Brake Fluid (Circuit Low)
- C0035, C0040, C0041, C0045 – Wheel Speed Circuit Malfunction (each code represents a specific wheel).
- C0290-292 – Communications lost with the PCM or BCM
Here’s a list of every ABS code.
Common Fixes
The most common fix for an ABS light that is on is to repair a wheel speed sensor, followed closely by low brake fluid.
A code scanner can help speed the diagnosis along, but there is some anecdotal evidence you can use:
- Brake warning light on: The brake fluid reservoir may be low.
- TPMS (tire pressure) light: A tire is so low that the wheel speed sensor on its hub is reporting it’s turning faster than the other wheels.
- Traction control light: It’s likely a wheel speed sensor-related issue if you’re getting a traction control warning.
Is it Safe to Drive Your Insight With the ABS Light On?
Your Insight’s anti-lock braking system is a safety feature that prevents the wheels from locking up, which keeps you in control of the direction the car is moving during hard braking.
Assuming the brake system warning light isn’t on with the ABS light, you can still drive your Insight. The ABS light is different than the brake warning light itself. The brake warning light indicates a problem with the physical braking system and that your Insight is unsafe to drive.
Yes, you can drive your Insight with the ABS light on. But is it safe? Unfortunately, it’s not as safe, especially when it’s raining, snowing, or the road surface is loose/uneven. That’s why we recommend having the ABS system fixed as soon as possible.
Conclusion
Wheels that are turning will slow your Honda Insight faster than a wheel that locks up. Skidding tires will get a flat spot quickly, which can be inconvenient and dangerous.
ABS also allows you to steer your car while slowing down and has been around for so long that many drivers have never driven a vehicle without it.
It is not advisable to ignore your Honda Insight’s ABS light. Most of the time, the wheel speed sensors are going to be what triggers it. If there is anything you would like to add, please leave a comment below. Good luck!
Paying attention to your car is imperative in these modern times, indeed, if you do not do the minimum routine service of it, or if you do not take into account signs of abnormality, you strongly risk to observe your car withering away. This is specifically the subject we are gonna talk about on this webpage, one of the symptoms that most perturbs car owners is the ABS warning light on Honda Insight. In an attempt to help you review this warning light, we will first check out what this ABS warning light corresponds to, then in a second how to handle it if the ABS light is on Honda Insight?.
What does the ABS light on Honda Insight indicate?
We will commence our article with the definition of an ABS warning light on Honda Insight, to do this, in first, we will see what an ABS is, and later on, why the ABS light on your car lights up.
What is the ABS on Honda Insight?
To begin with, it is fundamental to describe to you what the ABS of your Honda Insight is intended for so that you can understand the remaining of this guideline. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The aim of this system is to optimise the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Honda Insight is made from several elements, here they are:
- Speed sensors on each wheel, which will examine if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Honda Insight
.
The fact is, you can simply come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is precisely the behaviour that ABS allows, it will optimise braking to the maximum by linking the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Honda Insight
Now we proceed to the part that you are certainly more keen on, meaning of an ABS warning light on a Honda Insight? Firstly, it is an orange light, so if it is on it denotes that your ABS system is faulty. You should be knowledgeable that whenever the ABS warning light is on, the ABS will be put into safety mode, so you should adjust your driving and not take any risks. Here are the different problems that the ABS warning light on your Honda Insight can indicate:
- It could be a simple short circuit, a broken wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
- A malfunctioning ABS sensor: A malfunction of one of them triggers the ABS light on your Honda Insight to come on
- The ABS hydraulic block of your Honda Insight: If it is faulty it is possible that the indicator light will occur and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a trouble, being the center of all decisions made to operate your ABS, the light will undoubtedly come on.
What if the ABS light turns on on my Honda Insight?
We will now proceed to the part where we will try to give you some solutions to turn off this light, and thus answer the following question, what to do if the ABS light is on on my Honda Insight?. The solutions will depend on the failures you are enduring. Firstly, pass your Honda Insight to the diagnostic tool, if you don’t know how to read a fault code on Honda Insight, don’t hesitate to examine our guideline which explains the steps to take. Once you have established the source of your trouble, here are the steps to take to correct it and turn off the ABS light on your Honda Insight:
- Issue of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a specialist, but if it’s dead, it could cost you around 1000€ to replace the ECU and 1500 to 2000€ if you have to replace both of them.
- Electrical trouble: Once you’ve identified an electrical trouble with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A faulty sensor: Occasionally a simple cleaning of the sensors will be enough to fix the trouble, in any other case changing a sensor can cost up to a few hundred euros.
If you need more tutorials on the Honda Insight, go to our Honda Insight category.