Ошибка 9005 dhcp

Добрый день! %username%.

Развернут на тестовом стенде DC, DHCP + DNS. Проблема такая, в сети Компьютер получает не верный IP адрес DNS сервера.

IP Адрес сервера DNS должен быть 10.2.10.150 а выдает 10.2.10.1.

В событиях сервера пишет:
Регистрация записи типа PTR для IPv4-адреса [[10.2.10.2]] и FQDN pc1-new.dom.local завершилась с ошибкой 9005 (Операция DNS отвергнута.
).

Обратная зона создана.

ipconfig сервера:

В оснастке DHCP прописал доменного администратора для регистрации DNS записи, не помогло.

Original setup was 2x Domain Controllers, both 2012 R2, configured with DHCP failover.

I did an in-place upgrade of DC1 to 2019 (don’t start) and it seemed to go fine.

After it came back online, it said that DHCP needed to have its configuration finalised, just one click and that was sorted.

However ever since that, the event log is getting a lot of errors about updating DNS

Text

Forward record registration for IPv4 address [[x.x.x.x]] and FQDN computer.domain.local failed with error 9005 (DNS operation refused.).

Text

PTR record registration for IPv4 address [[x.x.x.x]] and FQDN computer.domain.local failed with error 9005 (DNS operation refused.).

Things I have tried:

Check the password in DNS dynamic update registration credentials

Remove DC1 from DHCP failover

Remove DHCP from DC1

Reboot

Add DHCP back

Setup DHCP failover

Everything went ok, no errors in dcdiag /dns, but still those errors persist.

Anyone any other suggestions

Event 20319  DHCP-Server

Log Name:     
DhcpAdminEvents

Source:       
Microsoft-Windows-DHCP-Server

Date:         
2020-04-14 10:54:31

Event ID:     
20319

Task Category: Name Registration.

Level:        
Error

Keywords:     

User:         
NETWORK SERVICE

Computer:     
DC01.sunneadm.local

Description:

Forward record registration for IPv4 address [[192.168.83.31]] and FQDN
SUS1909.sunneadm.local failed with error 9005 (DNS operation refused.

).

Event Xml:

<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>

 
<System>

   
<Provider Name=»Microsoft-Windows-DHCP-Server» Guid=»{6d64f02c-a125-4dac-9a01-f0555b41ca84}» />

   
<EventID>20319</EventID>

   
<Version>0</Version>

   
<Level>2</Level>

   
<Task>124</Task>

   
<Opcode>0</Opcode>

   
<Keywords>0x2000000000000000</Keywords>

   
<TimeCreated SystemTime=»2020-04-14T08:54:31.240510100Z» />

   
<EventRecordID>1167737</EventRecordID>

   
<Correlation />

   
<Execution ProcessID=»1264″ ThreadID=»5308″ />

   
<Channel>DhcpAdminEvents</Channel>

   
<Computer>DC01.sunneadm.local</Computer>

   
<Security UserID=»S-1-5-20″ />

 
</System>

 
<EventData>

   
<Data Name=»IP_Name»>[[192.168.83.31]]</Data>

   
<Data Name=»FQDNName»>SUS1909.sunneadm.local</Data>

   
<Data Name=»Errorvalue»>9005</Data>

   
<Data Name=»operation»>DNS operation refused.

</Data>

  </EventData>

</Event>

Event 20322 DHCP-Server

Log Name:     
DhcpAdminEvents

Source:       
Microsoft-Windows-DHCP-Server

Date:         
2020-04-14 10:54:09

Event ID:     
20322

Task Category: Name Registration.

Level:        
Error

Keywords:     

User:         
NETWORK SERVICE

Computer:     
DC01.sunneadm.local

Description:

PTR record registration for IPv4 address [[10.255.248.116]] and FQDN AP_Fryxellska_FF013125.sunneadm.local failed with
error 9009 (DNS server not authoritative for zone.

).

Event Xml:

<Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>

 
<System>

   
<Provider Name=»Microsoft-Windows-DHCP-Server» Guid=»{6d64f02c-a125-4dac-9a01-f0555b41ca84}» />

   
<EventID>20322</EventID>

   
<Version>0</Version>

   
<Level>2</Level>

   
<Task>124</Task>

   
<Opcode>0</Opcode>

   
<Keywords>0x2000000000000000</Keywords>

   
<TimeCreated SystemTime=»2020-04-14T08:54:09.190650100Z» />

   
<EventRecordID>1167735</EventRecordID>

   
<Correlation />

   
<Execution ProcessID=»1264″ ThreadID=»5308″ />

   
<Channel>DhcpAdminEvents</Channel>

   
<Computer>DC01.sunneadm.local</Computer>

   
<Security UserID=»S-1-5-20″ />

 
</System>

 
<EventData>

   
<Data Name=»IP_Name»>[[10.255.248.116]]</Data>

   
<Data Name=»FQDNName»>AP_Fryxellska_FF013125.sunneadm.local</Data>

   
<Data Name=»Errorvalue»>9009</Data>

   
<Data Name=»operation»>DNS server not authoritative for zone.

</Data>

  </EventData>

</Event>

---

Michael Wiskman

Hello,

I have 2 DHCP Servers Windows 2012R2 (Failover) and 5 DCs (2 x 2012R2 and 3 x 2008R2). The DHCP servers are *not* DCs and are in the «DNSnsUpdateProxy» group. Both servers have the same account configured for DNS dynamic update registration. DHCP
is configured to always update DNS. My problem is, that DNS Updates work *sometimes*. I checked DNS record permissions and everything seems to be all right (account for dynamic updates is owner of the record). PTR zone is in place. Even new records aren’t
created sometimes. In the DHCP logs, most errors have DnsRegError «2», but I can’t find anything about these errorcodes anywhere.

31,01/30/18,16:36:04,DNS Update Failed,10.50.2.2,MV302684.<DNS-Suffix>,,,0,6,,,,,,,,,2

I also get

31,01/30/18,16:34:07,DNS Update Failed,10.30.243.11,C103008..<DNS-Suffix>,,,0,6,,,,,,,,,1460

but I think this is a special case…

I also see sometimes

1,01/30/18,15:36:18,DNS Update Failed,142.10.250.114,P305114.<DNS-Suffix>,,,0,6,,,,,,,,,9005

Anyone any idea?

__Leo

Hello,

I have 2 DHCP Servers Windows 2012R2 (Failover) and 5 DCs (2 x 2012R2 and 3 x 2008R2). The DHCP servers are *not* DCs and are in the «DNSnsUpdateProxy» group. Both servers have the same account configured for DNS dynamic update registration. DHCP
is configured to always update DNS. My problem is, that DNS Updates work *sometimes*. I checked DNS record permissions and everything seems to be all right (account for dynamic updates is owner of the record). PTR zone is in place. Even new records aren’t
created sometimes. In the DHCP logs, most errors have DnsRegError «2», but I can’t find anything about these errorcodes anywhere.

31,01/30/18,16:36:04,DNS Update Failed,10.50.2.2,MV302684.<DNS-Suffix>,,,0,6,,,,,,,,,2

I also get

31,01/30/18,16:34:07,DNS Update Failed,10.30.243.11,C103008..<DNS-Suffix>,,,0,6,,,,,,,,,1460

but I think this is a special case…

I also see sometimes

1,01/30/18,15:36:18,DNS Update Failed,142.10.250.114,P305114.<DNS-Suffix>,,,0,6,,,,,,,,,9005

Anyone any idea?

__Leo

PTR record registration failed with error 9005 (DNS operation refused)

Original setup was 2x Domain Controllers, both 2012 R2, configured with DHCP failover.

I did an in-place upgrade of DC1 to 2019 (don’t start) and it seemed to go fine.

After it came back online, it said that DHCP needed to have its configuration finalised, just one click and that was sorted.

However ever since that, the event log is getting a lot of errors about updating DNS

Things I have tried:

Check the password in DNS dynamic update registration credentials

Remove DC1 from DHCP failover

Remove DHCP from DC1

Setup DHCP failover

Everything went ok, no errors in dcdiag /dns, but still those errors persist.

Anyone any other suggestions

Ensure AV Gear Plays Nice on the Corporate Network

Is the 2012 server listed as the primary DNS provider on the 2019 upgrade? Couldn’t hurt to do a replication check as well. https://www.microsoft.com/en-us/download/details.aspx?id=30005 Opens a new window

When was the upgrade completed?

It was completed a few days ago now. The 2012 is the primary DNS provider on the 2019 DC, and replication is working happily

• check 31 Best Answers
• thumb_up 117 Helpful Votes

Why are you running DHCP on DCs?

Check out this thread, too:

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question.

Read these next.

Snap! — LifeLock Breach, Secret AI, Reversible Aging, Brain Fog?

Your daily dose of tech news, in brief. Welcome to the Snap! Flashback: January 16, 1956: SAGE Is Disclosed to the Public (Read more HERE.) Bonus Flashback: January 16, 1969: Soyuz 4 & 5 Make History (Read more HERE.) You need to hear .

File Permissions

Hi All,Last week my work asked me to remove all Security groups and set access levels per user. They also have decided that the no longer want these at Folder level but would rather it was File level across the whole server.The reason for this , They say .

Spark! Pro series – 16th January 2023

It is a new week, full of endless opportunities and possibilities. Let’s make the most of it! Just a reminder, if you are reading the Spark!, Spice it up. We like it spicy here! Today in History: NASA’s.

How do you like to learn?

There is a lot of buzz and actually also controversy about learning styles and multiple intelligences in the way that we think about learning, so not taking a side here and saying that it is a magical code that will unlock our ability to do all things. T.

poor wifi, school’s third floor

I work as a help desk technician at a high school for a school district. Teachers/students on the building’s third floor have been reporting poor wifi, with their Chromebooks/laptops etc experiencing slow connectivity and random disconnections. We hav.

Источник

Failed registration with status dns error

(Just postsed this on my technet post as well)
.
Still trying to chase down this issue. Recent things I’ve tried:

Set interfaces on DNS down to a single IPv4 address (removed IPv6 addresses).

Cleaned out old WINS server info from DNS

DHCP -DNS properties:

DHCP — Advanced — IPv4 Credentials:

DNS Primary Forward Lookup Zone:

(I’ve tried with and without the DHCP and DNS computer accounts in here as well.

DNSAdmins group (same thing here):

This doesn’t seem to be that complicated, but I can’t figure it out why these are failing to update for the life of me. This all started when I migrated my DHCP server from a 2008R2 server to a 2019 Server (new image, not an in-place upgrade).

If I do a «IPCONFIG /RENEW» I get 3 events from my machine account, 1 for the forward lookup zone from my wired NIC, one from the PTR record for my wired NIC, and 1 for the forward lookup zone on my wireless NIC:

When I check DNS, I do see all 3 of these records are there and were updated this morning. What am I missing? Anyone have any ideas? Could the clients be updating DNS, and when the DHCP server tries to it fails bc the record was already modified?

jfrish

Member

I have resolved this.

There are two potential issues that were my root cause
1. Machine accounts were registering DNS before DHCP was, and my DNS update credentials did not have access to the machine accounts. Added the DNS service account to a group that already had full access to each machine account resolved my issue completely, no more errors in event viewer.

2. The second and still potential root cause, was I was using scavenging. With scavenging enabled, the «no-refresh» time would prevent DHCP from updating an object that was update within the specified time-frame. After some debate and thought, I determined I did not need to have scavenging enabled, and disabled it.

Источник

Failed registration with status dns error

This forum has migrated to Microsoft Q&A. Visit Microsoft Q&A to post new questions.

Answered by:

Question

Does anyone know how to resolve the following cluster errors (these occur approximately every 15 minutes).

Cluster network name resource ‘Cluster Name’ encountered an error enabling the network name on this node. The reason for the failure was:
‘Unable to obtain a logon token’.
The error code was ‘1326’.
You may take the network name resource offline and online again to retry.

Cluster network name resource ‘Cluster Name’ failed registration of one or more associated DNS name(s) for the following reason:
The handle is invalid.
Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.

We have 3 networks defined

Heartbeat — Cluster Use = Internal (No DNS configured)

Live Migration — Cluster Use = Disabled (No DNS configured)

Management — Cluster Use = Enabled (DNS configured)

We currently have a 6 node WS2008R2 Hyper-V cluster configured with the same network configuration with no issues.

Answers

Thanks for your post.

In order to troubleshoot, you may check the following points:

• Check that on the DNS server, the record for the Network Name resource still exists. If the record was accidentally deleted, or was scavenged by the DNS server, create it again, or arrange to have a network administrator create it.
• Ensure that a valid, accessible DNS server has been specified for the indicated network adapter or adapters in the cluster.
• Check the system event log for Netlogon or DNS events that occurred near the time of the failover cluster event. Troubleshooting these events might solve the problem that prevented the clustered Network Name resource from registering the DNS name.

For more detailed information about Network Name Resource registration and Event ID 1196, please refer to the following article. Hope it helps.

DNS Registration with the Network Name Resource

Windows Server 2008 Troubleshooting: Event ID 1196 — Microsoft-Windows-FailoverClustering

If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.

TechNet Community Support

Thanks for your post.

In order to troubleshoot, you may check the following points:

• Check that on the DNS server, the record for the Network Name resource still exists. If the record was accidentally deleted, or was scavenged by the DNS server, create it again, or arrange to have a network administrator create it.
• Ensure that a valid, accessible DNS server has been specified for the indicated network adapter or adapters in the cluster.
• Check the system event log for Netlogon or DNS events that occurred near the time of the failover cluster event. Troubleshooting these events might solve the problem that prevented the clustered Network Name resource from registering the DNS name.

For more detailed information about Network Name Resource registration and Event ID 1196, please refer to the following article. Hope it helps.

DNS Registration with the Network Name Resource

Windows Server 2008 Troubleshooting: Event ID 1196 — Microsoft-Windows-FailoverClustering

If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.

TechNet Community Support

How are things going? I just want to check if the information provided was helpful. If there is any update or concern, please feel free to let us know.

Best Regards,
Aiden

If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here .

TechNet Community Support

• Proposed as answer by Dominic Gomez [MSFT] Microsoft employee Friday, May 3, 2013 3:47 PM

We were experiencing the same issue when setting up our 2012 cluster. The DNS alias wouldn’t auto create (permissions OK). If I manually created the A record the nodes wouldn’t update the record. We destroyed the cluster and recreated and everything is now fine :/

Beginning with Windows Server 2008, when a cluster is created, the computer objected associated with the CNO (Cluster Name Object), unless pre-staged in some other container, is placed, by default, in the Computers container. Windows Server 2012 Failover Clusters give cluster administrators more control over the computer object representing the CNO. The Product Group’s blog mentioned earlier, details new functionality in Windows Server 2012, which includes:

• Using Distinguished Names when creating the cluster to manually control CNO placement
• New default behavior where a CNO is placed in the same container as the computer objects for the nodes in the cluster
• The Virtual Computer Objects (VCOs) created by a CNO are placed in the same container as the CNO

Having more control over cluster computer object(s) placement, while desirable, requires a bit more ‘awareness’ on the part of a cluster administrator. This ‘awareness’ involves knowing that, by default, the CNO when placed in the non-default location may not have the rights it needs for other cluster operations such as creating other cluster computer objects (VCOs).

it appeared to be a case of the CNO account password being out of sync in the domain. Steps taken to resolve:

1. Temporarily move the CNO account into the Computers container
2. Log into one of the cluster nodes with a domain account that had the Reset Password right in the domain
3. Take the cluster Network Name offline. If this does not work to solve the problem, s imulate failures for the cluster Network Name resource until it is in a permanent failed state
4. Once the resource was in an offline state, right-click on the resource, choose More Actions and then click Repair
5. The previous action caused the password for the CNO to be reset in the domain
6. Restart the cluster service on all nodes

The Failover Clustering Diagnostics logs will give you much more information about what is going wrong. You can find it in the Event Viewer: navigate to Applications and Services Logs -> Microsoft -> Windows -> FailoverClustering -> Diagnostic

Источник

I recently migrated some DHCP servers from 2008r2 to 2016 and some of them are having issues registering DNS PTR records for DHCP leases.  Servers are fully integrated DCs running DHCP/DNS/GC.

I receive this error in the event log (DHCP-Server 20322 — Name Registration.)…

PTR record registration for IPv4 address [[172.19.1.241]] and FQDN PC123.XXX.com failed with error 9005 (DNS operation refused.

).

Also, in the DhcpSrcLog-DAY.log i receive these entries

31,05/16/18,00:01:29,DNS Update Failed,172.19.1.241,PC123.XXX.com,,,0,6,,,,,,,,,9005  

and occasionally 

31,05/16/18,00:01:00,DNS Update Failed,172.19.1.37,PC124.XXX.com,,,0,6,,,,,,,,,9004

The DHCP scope is set as it should be…

And under the DHCP server’s IPv4 «Advanced» tab I have entered the credentials of a user that is a member of the «DnsUpdateProxy» group.

All of the forward look zones register just fine.

I simply cannot find anything on that event log I’m getting.

Looking for some assitance.

Thanx!

Genshin Impact не лишена недостатков, особенно потому, что игра требует постоянного и сильного интернет-соединения и большого объема памяти. Именно здесь возникает ошибка 9005 !
Игроки, в основном на PlayStation и мобильных платформах, столкнулись с новой проблемой, известной как ошибка 9005. Она связана с пространством для хранения данных, или его отсутствием, и, к сожалению, имеет только одно неудобное решение. Ниже мы расскажем, что вы можете попробовать.
В мире Genshin Impact происходит много событий, и мы рекомендуем ознакомиться с расписанием баннеров, чтобы узнать, какие персонажи сейчас доступны, а затем проверить свою текущую команду по нашему списку уровней. Мы также подготовили обратный отсчет до следующего обновления.

Как исправить ошибку 9005 Genshin Impact

Код ошибки Genshin Impact 9005 — это, по сути, ошибка»недостаточного объема памяти», которая возникает на разных платформах, когда игроки пытаются загрузить и обновить игру. Однако в большинстве случаев места в памяти остается достаточно.
Похоже, что ошибка возникает случайным образом и не является отражением того, сколько места в памяти осталось; игра просто не зарегистрировала наличие свободного места.
Первое, что нужно сделать, — это перепроверить, сколько свободного места есть на вашем устройстве, чтобы убедиться в этом, и, возможно, освободить немного больше для безопасности.
Большинство игроков, столкнувшихся с этой проблемой, обнаружили, что удаление и повторная установка всей игры устраняет код ошибки. Это может занять некоторое время, учитывая большое количество обновлений Genshin Impact, но на данный момент это кажется единственным надежным решением.
Если вам нужна дополнительная помощь, у нас есть и другие исправления для других проблем Genshin Impact, например, код ошибки 4206, который возникает, когда серверы не работают, и ошибка 9203, с которой вы столкнетесь, когда загрузка игры не инициализируется.

  Гайды     
  27 июня 2022     
  0
  (1  164 голосов)

Forward record registration for IPv4 address [ [x.x.x.x]] and FQDN computer.domain.local failed with error 9005 (DNS operation refused.). Text PTR record registration for IPv4 address [ [x.x.x.x]] and FQDN computer.domain.local failed with error 9005 (DNS operation refused.).

Full
Answer

What does [error_install_UI_failure (0x655) ] mean?

Oct 18, 2021 · The errors in DHCP-Server event log that we are receiving are: 1. Forward record registration for IPv4 address [ [192.168.0.69]] and FQDN machinename.domain.local failed with error 9005 (DNS operation refused.). 2.

What does [error_wrong_compartment (0x5bc) mean?

Jul 05, 2019 · Windows Server PTR record registration failed with error 9005 (DNS operation refused) Posted by PaulNSW on Jul 5th, 2019 at 5:12 AM Needs answer Windows Server Active Directory & GPO Original setup was 2x Domain Controllers, both 2012 R2, configured with DHCP failover. I did an in-place upgrade of DC1 to 2019 (don’t start) and it seemed to go fine.

What does [error_printer_driver_warned (0xbc5) mean?

9003 Lack of Trades The credit profile does not contain any valid tradelines. 9005 Lack of Activity The credit profile has had no activity in the last 12 months 9996* Blocked Consumer The file belongs to an individual on Experian’s block consumer file. These are names of individuals Experian will not sell

What does [error_invalid_monitor_handle (0x5b5) ] mean?

Sep 22, 2014 · Windows System Error Code List; Code: Description: Error Code 1: Incorrect function. [ERROR_INVALID_FUNCTION (0x1)] Error Code 2: The system cannot find the file …

What are the types of errors in genshin impact?

There are three types of errors that can occur in Genshin Impact: overlay message errors, dialog errors, and critical errors. Overlay message errors are delivered to the player in the form of white text that appears on the top half of the screen that disappears after a short period of time, causing no impact on gameplay; while dialog errors open up a dialog box in the middle of the screen that requires the user to click a button to perform an action that is required to solve the error or to close the dialog box to continue. Critical errors will quit the game with the error message.

Why do I get errors?

Errors can be caused by a variety of different reasons, such as invalid actions, network issues, cheats/hacks, exploits, bugs, technical issues, and the like.

Can’t switch character while jumping?

The Cannot switch character while jumping error occurs when the player attempts to switch character while jumping or during the frames of Keqing ‘s Elemental Skill, Stellar Restoration, when it is used twice in a row (the first time to hurl the Lightning Stiletto and the second time to blink to its location and unleash a slashing attack) where she is unleashing a slashing attack. The game counts falling as a result of jumping as jumping (e.g. attempting to switch character while falling after dashing then jumping off a cliff).

Why is my mechanicus not yet constructed?

The Not yet constructed, unable to reconstruct error occurs when the player attempts to reconstruct a Mechanicus in Theater Mechanicus while the Mechanicus that the player is attempting to reconstruct in question does not exist, due to a bug or if the Mechanicus was somehow destroyed between the moment when it was selected and the moment the player attempted to reconstruct it (for example, if the player constructs a Mine, selects it, waits for it to self-destruct after coming into contact with an opponent and then attempts to reconstruct it, this error will occur).

What does «cannot discard» mean in Minecraft?

The Cannot discard item error occurs when the player attempts to discard an item that is not discardable, such as Stones of Remembrance, Slime-Swallowed Calla Lilies, Everlasting Incenses, which are Quest Items .

Cannot use revival items on deployed characters?

The Cannot use revival items on deployed characters error occurs when the player attempts to use a Revival type Recovery Dish via the NRE (Menu 30) while the player’s active character is in the few frames of the animation after their HP reaches 0 where they appear to fall towards the ground before seemingly transforming into blue dust and then switching to another character.

Why can’t I connect to MiHoYo servers?

The game is unable to connect to the miHoYo servers. This may be the result of maintenance or a bad Internet connection. Check your internet connection with other websites, then run the network troubleshooter for the platform you are using.

What is error code 9004?

As it offers many services, it consists of advanced features but seldom the Verizon users come across some technical glitches. Verizon error code 9004 is one such issue that occurs most of the time and restricts …

Why is my Verizon phone useless?

This error renders your phone useless because when this error occurs, you cannot make a call, send a message and access the internet.

How to run regedit.exe?

The very first thing you have to do is, tap on the Start button and navigate to choose the Run option. You can see the Run dialog box as well. Now, you have to type “regedit.exe” in the command box and hit on the Enter key. When the command will execute, then it will display the window “Registry Editor.”.

How to update Windows 10 on a laptop?

To go through this step, you have to switch on the computer at first. After that, choose the Start icon and tap on it . Here many options will be visible for you on the screen. From there, click on “Settings” and move to select the “Update and Security” icon. Now, select Windows Update and tap on it.

Is Verizon a wireless company?

Verizon is one of the leading telecommunications companies which provides wireless products and services all over the globe. It becomes successful to grab the attention of users by providing exceptional features as well as the best-in-class services. But still, it is not free from random flaws like others.

Error Code 9001

I’m having an issue with my Rebel LG tracfone. When I first got the phone and set it up, I didn’t have issues with my voicemail, now I can’t listen to them by going into the inbox part of my phone. It says unable to update, try again later.

Re: Error Code 9001

Hi Tower1999. I’m TracFone Larry. I’m sorry that you’re having some problems. We’ll review your account and further investigate what happened with your phone service. We need to take this issue offline so we can address it further. Please check your forum inbox for a message.

Popular Posts:

1. stream read error when running disk

2. systematic error occurs most often in which type of sampling procedure

3. how to pipe error linux

4. windows media player shows an error when trying to play a video

5. how to fix error 553

6. error when printing started cause

7. how many sig figs to round to in percent error

8. how to fix error code 0x800f0922

9. why do i get a divide by zero error when i use the max function excel

10. how to fix kotor stackhash 690a error for vist

Добрый день! %username%.

Развернут на тестовом стенде DC, DHCP + DNS. Проблема такая, в сети Компьютер получает не верный IP адрес DNS сервера.

IP Адрес сервера DNS должен быть 10.2.10.150 а выдает 10.2.10.1.

В событиях сервера пишет:
Регистрация записи типа PTR для IPv4-адреса [[10.2.10.2]] и FQDN pc1-new.dom.local завершилась с ошибкой 9005 (Операция DNS отвергнута.
).

Обратная зона создана.

ipconfig сервера:

В оснастке DHCP прописал доменного администратора для регистрации DNS записи, не помогло.