Ошибка 550602 hp 402

55.0602 Error Code HP Printer

The error code “55.0602” on an HP printer typically indicates a problem with the internal communication between the printer and its firmware. This error can occur due to various reasons such as corrupted firmware, outdated printer driver, or hardware issues. HP printers have evolved with our printing needs ranging from home and personal use to office usage and even to the innovators who are always on the go.

This adaptable technology has made our printing experiences very smooth and highly efficient. But there are days when your printer faces internal and external issues that lead to errors that lead your printer to stop functioning. In such a scenario, you can’t always have an access to an IT technician. At such moments self-help becomes helpful. And exactly at this point, this article comes into play.

Causes of Error 55.0602 HP Printer Machine

By understanding the reasons behind this error, you will be better able to handle the troubleshooting methods and will handle your HP printer in a much more efficient way for future use. Let us first understand the reasons why your hp printer shows this error message- ‘hp printer error 55.0602.’ Some of the reasons are:

• This error can crop up because of engine communication issues.
• Another reason behind HP Printer Error Message is a hardware memory error.

Troubleshooting Steps of Error 55.0602

Some of the troubleshooting methods for- ‘hp printer error 55.0602’ are listed below:
There are a few solutions that can solve this error. Please follow the instructions in the order they have been given:

Solution 1: The first solution to solve this error is to restart the printer. The steps to do so are as follows:

• First of all, switch off your printer by pressing the power button that you can find on the printer.
• Now switch off the main power supply of the printer.
• Disconnect any USB cables that attach to the printer.
• Remove the power cord from the printer. The power cord can be found at the back of the printer.
• Remove the other end of the power cord from the wall outlet too.
• Press the power button of the printer to release any remaining power in the printer.
• Wait for a while to allow some cool-off time for your printer.
• After the wait, attach the power cord back to the printer.
• Plug the power cord into the wall outlet.

Note: Do not use power surge outlets. A direct wall outlet is necessary for this troubleshooting method.

• Power on the wall outlet switch.
• Press the power button of the printer.
• Take a test print to see if the issue has been resolved.

Solution 2: Another troubleshooting method you can try is to use ‘HP Print and Scan Doctor for Windows. It is an initiative by HP to resolve common errors without running to a technician. Here is how you can use this wonderful tool:

• First of all, you need to download ‘HP Print and Scan Doctor for Windows’ from the internet.
• In the downloaded folder look for HPPSdr.exe and open it.
• Now click on the ‘Start’ button on your PC.
• A drop-down list will appear, write your printer’s name and select it as it appears in the list.
• If you are not able to see the name of your printer in the list, it is because our printer is switched off. Turn it on and try again.
• When you see your printer’s name, click on it.
• Now a list will appear which will show various possible issues, errors, and problems concerning a particular printer model.
• Click on the error that you want a solution for.
• Click on Fix Printing.

This step usually resolves the error, if it doesn’t then move on to the next solution.

Solution 3: In case the above two solutions can’t solve the error then you should know that the issue is with the hardware of your hp printer. The engine control PCA needs to replace. Make sure you buy authentic parts to ensure the long and strong performance of your hp printer.

The Scope of Services:

• The above steps should help you resolve the hp printer error 55.0602 but you may still need some technical assistance.
• To help you in need, the Printer Technical Support team for resolutions is always available.
• You can feel free to connect with our experts at any hour of the day as and when required.
• You can opt to either chat with us live or email us at your convenience.
• You can also call us    for a customized service on your issues.

FAQ’s

Ques 1. How to troubleshoot the HP Laserjet Pro m402n?

Ans. If you are experiencing issues with your HP Laserjet Pro m402n, here are some troubleshooting steps that you can follow:

1. Check the connection: Ensure that the printer properly connects to your computer or network. If you use a wired connection, make sure that the cable securely plugs in. If you are using a wireless connection, ensure that the printer is connected to the network and that the network is working correctly.
2. Check the paper tray: Ensure that the paper tray is properly loaded with the correct size and type of paper. Also, check for any jams or obstructions in the paper path.
3. Check the toner cartridge: Ensure that the toner cartridge properly installs and is not empty. If the toner level is low, replace the cartridge.
4. Print a test page: Printing a test page can help you identify the source of the problem. To do this, go to the printer’s menu and select “Reports,” then “Print Configuration Page.”
5. Update the firmware: Check for firmware updates on the HP website and update the printer’s firmware if available.
6. Reinstall the printer driver: If the issue persists, try uninstalling and reinstalling the printer driver.
7. Contact HP support: If none of the above steps resolves the issue, contact HP support for further assistance.

Ques 2. How to Resolve the HP Printer 55.0602 Error?

Ans. The “55.0602” error code on an HP printer typically indicates a problem with the DC controller or firmware. Here are some steps you can take to resolve this error:

1. Restart your printer: Turn off your printer, unplug it from the power source, and wait for about 30 seconds before plugging it back in and turning it on. This can help reset the printer and clear any temporary errors.
2. Check for firmware updates: Visit the HP website and check for any available firmware updates for your printer model. If an update is available, download and install it following the instructions provided.
3. Check for loose connections: Make sure all cables and connectors securely attach and are not loose or damaged. Check the connection between the DC controller and the for-matter board, and make sure it’s firmly in place.
4. Replace the DC controller: If the above steps don’t resolve the error, the DC controller may need to replace. Contact HP support or a certified technician for assistance.

Ques 3. Why does 55.0602 Error turn off then turn on?

Ans. The 55.0602 error code is an indication that your printer’s internal hardware may be malfunctioning, and it needs to reset to its factory settings. This can be done by turning the printer off and then on again, which will reset all of its internal components and hopefully fix the 55.0602 error code issue. If the issue persists after multiple attempts, you may need to get it serviced.

Hi @nguyentai,

1) Turn the printer off.

2) Unplug the power cable from both sides (printer and outlet)

3) Hold the power-on button for 10 seconds and then release it.

4) Plug the printer directly to a wall-socket.

5) Turn the printer on.

If the error message reappears then the engine control PCA needs replacing.

https://support.hp.com/in-en/product/hp-laserjet-pro-m501-series/7837159/document/c05049258/

I hope that helps,

Cheers!

Fuser is the component of a laser printer; a bond toner that uses heat and pressure on the paper. However, it may show up the HP 50.2 fuser error due to overheating issues. The error message also refers to the timeout error. As a result, you fail to perform print tasks. By following our curated guide, you can solve HP printer fuser error 50.2 quickly.

Recommendation: Connect with a technician via live chat to know the various causes of the error and the most appropriate solution to fix it.

Best Ways to Fix HP Printer Fuser Error 50.2

Resetting or replacing the fuser of your printer is beneficial to solve HP printer fuser error 50.2. There are other helpful tips to solve the fuser error. For example, you should examine the power source and keep the printer in the right environment.

Make sure you remove unwanted objects from your HP printer to avoid heat problems. If there is a queue for the print tasks, cancel them all to avoid inconvenience. If you still face HP 50.2 fuser error, restart your printer. Read these solutions with step-by-step instructions and implement them carefully.

Solution 1: Reset Printer Fuser

The easiest way to fix HP printer fuser error 50.2 is to reset the fuser. All you are required to do is power off the machine, disconnect cables, and reinstall the fuser. As you do so, make sure you check that the fuser is properly installed.

• Firstly, turn off the printer and unplug all the connection cables from it.
• Now wait for a minute and then open the exterior lid of the printer.
• Try to Slide out the fuser to take it out from the printer. Make sure it is at normal temperature while ejecting it.

• Examine the fuser if there is any paper inside it. If you find one then remove it carefully.
• You need to clean if you found any jammed ink around the fuser unit. It will assure the more reliable performance of the printer.
• Then, It’s time to put the fuser back into the printer. Ensure the accurate placement of its slot.
• Close the door and now make all the cable connections with the device.
• Finally, turn on your printer and wait for it to remain idle and silent.

Once you reset the fuser, you should stop seeing HP 50.2 fuser error. However, if you are still facing the same issue, you can restart your HP printer.

Solution 2: Restart Your HP LaserJet Printer

By restarting the HP Laserjet series printer, you can avoid bugs or minor errors. HP printer fuser error 50.2 can also be fixed if you turn off the printer machine, remove all the cables, connect them back after 5 minutes, and restart your printer.

• Firstly turn off your HP printer.
• Then eject the power cable from the rear end.
• Now you need to wait for around 25 minutes and after that make all the connections as it were.

• Now turn ON your printer. Wait for the device to start.
• Try to print again.

Make sure you let your printer start properly and then continue using it the regular way. This should fix the faults now. If it does not, try more solutions to resolve HP 50.2 fuser error.

Solution 3: Keep the Environment in Check

It is important to ensure where your HP printer is placed. The unsuitable location of your printer may lead to fuser error. If you are facing a 50.2 fuser error on HP LaserJet Pro m402n, there is a probability your printer is affected by heat. In that case, you can change the location of your printer and keep it in a cool place so it can function properly.

Solution 4: Replace the Fuser Assembly of Your HP Printer

In case you are not getting results even after executing the aforementioned repairing methods, try replacing the fuser. In some instances, the fuser is corrupted or damaged. This may result in a 50.2 fuser error on HP Laserjet Pro 400, 200, and m402n series printers. In that case, replacing the fuser is the best choice.

Solution 5: Stop Printing Jobs to Fix HP Printer Fuser Error

The fuser of your printer can take load due to printing jobs pending in the queue. As an outcome, you confront a 50.2 fuser error on HP Laserjet Pro 200. To avoid such a problem, canceling all the print operations is best.

• If you use a printer with buttons, use the Cross button.
• Those who have touch screen printers can tap on the Stop, Cancel, or X icons.

When you are done canceling the printing tasks, you can restart your HP printer. This easily resolves the HP 50.2 fuser error.

Solution 6: Keep Unwanted Objects Away from the Printer

Certain objects placed near your printer may cause unexpected issues. HP printer fuser error 50.2 is one of the reasons that your printer is surrounded by objects that should not be present around the machine. Thus, you have to be sure that your HP printer is not surrounded by unwanted objects.

Besides, you can maintain the quality of your printer. Following are the instructions that can be considered:

• Make sure there is ample space between the printer machine and the wall or furniture.
• Objects or other devices should be away from your printer to avoid overheating issues.
• Also, your printer should be away from books, paper sheets, and files.

The more you maintain your printer, the more it stays in healthy condition. This will help you to avoid unnecessary errors such as the 50.2 fuser error on HP printers.

Solution 7: Check the Power Cord, Electric Connection, & Voltage

To fix HP 50.2 fuser error, it is important to examine your electric connection, power cables, and voltage as these may affect your printer machine’s fusor. It may also happen due to the damaged or loose power cable. As a result, it drives to the irregular transmission of power that caused the power line to malfunction.

Below are a few tips you should go through to keep things right:

• The power voltage should be according to the requirement of the device.
• Make sure you do not connect the machine with the power strips of other devices.
• Also, note that it is not advisable to connect your device with other devices and connect to the high-powered electric connection.
• The power cord of your device should be plugged directly into the wall socket.
• Make sure you use a plug designed for printers as the printer’s power plug as it carries a broad range of power to the device.

As you follow these instructions, the unwanted errors no longer appear on your screen. In case of any difficulty, you can directly contact us via live chat.

This Article is for HP LaserJet Pro 400, 200, m402n, p1102, and m402dn Printers Listed Below:

List of Error Codes 50.0, 50.1, 50.3, 50.4, 50.5, 50.6, 50.7, 50.8, 50.9, 50.11

You could meet several types of fuser error codes on your HP printer. The codes written below are all linked to these kinds of problems. Let’s know what certain error codes mean:

• 50.9 error – The wrong installation.
• 50.8 failure – High temperature of thermistor (TH2).
• 50.7 problem – Low temperature.
• 50.6 issue – Low temperature of thermistor (TH2).
• 50.5 failure – High fuser temperature of the thermistor.
• 50.4 problem – Drive circuit failure.
• 50.3 issue – High temperature of thermistor (TH1)
• 50.2 fuser error – Warm-up service in HP Printer.
• 50.1 problem – Low temperature of thermistor (TH1).

Reasons Behind HP Laserjet Fuser Error 50.2 and 50.3?

A fuser is a pair of heated rollers. When a paper passes through it, then it generates ample heat to melt the ink powder over the paper. It rolls out the printed paper to the output tray.

Also, you must have noticed that the upcoming papers are always hot. It is always at a high temperature but still, its thermostatic property prevents pages from burning.

Therefore, a sudden rise in the printer temperature leads to a 50.2 Fuser Error on HP Laserjet Pro 400, 200, m402, m402n, and m402dn.

Most importantly, the course of the fuser assembly is between 50,000-200,000 pages depending upon the printer model.

• While trying to print a document and it is not held by your Laserjet printer or does not match.
• An unexpected increase in the heat of the printer leads to damage to fuser equipment.
• Maybe the operating system is spinning with a corrupt registry.
• When the power circuit of the printer not working properly or start functioning terribly.

In Conclusion

Fuser error occurs due to its heat. However, there can be other reasons as well. By performing the troubleshooting methods shared above, you can get rid of the HP printer fuser errors.

Read more: Fix HP service error 79 on Laserjet Pro printers

Читайте также: