Ошибка 4101 capi2

Similar Questions

• Is it possible to delete all entries in the Eventvwr log?

  Separated from this thread.

  Is it possible to delete all entries in the Eventvwr log, so I can go back to that is the app is written in the Eventvwr log?

  By default, event viewer produced a considerable number of newspapers.

  The four elements of the menu in event viewer bar are file, Action, view and help.

  Clear a log only appears in the Action menu of drop-down menu if the cursor is placed in a newspaper that can be erased and a report in the list is not currently selected. So if it is placed on the option Windows logs clear a log is unavailable, while «subject of a report in a folder under five is not selected, the option clear a log is available.»

  

  The three main Windows logs files are Application, security, and system. The default file for these logs size is 20, 480 KB, which is larger than necessary. A reasonable size is 2 048 KB. You can easily change the size immediately after clearing the log by using the scrollbar to the right of the maximum log size to change whatever size you choose. In the same time make sure that the box before overwriting is checked. All of your changes by clicking apply then OK. If you have not disabled the first newspaper the system prevents the selection of a maximum file size less than the size of the existing file.

  see that the app is written in the Eventvwr log?

  The system records the entries in the logs. The system monitors everything that happens. Individual applications do not write entries in the Event Viewer logs. It’s the system that records the entries on startup applications, stop and crashing!

• BlackBerry Smartphones unable to highlight the entries in the call log

  Hope this isn’t a stupid question.  I am new to the storm and the forums.  I had my storm for about a month.  Just realized that when I’m in phone mode and do up the call log screen, the entries don’t «highlight» when I finger scrolling on the entries. So now I can’t tell which entry I am on to reconstruct because it won’t highlight.  I would appreciate any idea on how to restore the ability to highlight.  Thank you!

  Hi and welcome to the forums!

  You should have the ability to highlight an entry in the call log screen.

  Try a battery pull:

  No data will be lost when you do the following: remove the battery while the device is activated. Remplacer replace after one minute, let the device reboot 1-3 min, see if the problem is corrected.
  Thank you

  Bifocals

• Insert multiple entries for the calendar

  I’m inserting CREATEDATE and DUEDATE that could be 18/09/06 and 22/09/06 in a DB under a single entry. I would like a way to calculate the number of days between 18/09/06 and 09/22/06 and be able to enter as many entries than the number of days between these dates so that it displays as follows:
  Row1: Entry 18/09/06
  Row2: Entry 09/19/06
  Row2: Entrance 20/09/06
  Row2: Entry 21/09/06
  Row2: Entry 22/09/06

  While I have 5 unique entries in the DB as opposed to one.

  Thank you
  Emmanuel

  For anyone interested I did configure the following works fine:

  insert into
  AIP. LESSONPLANS
  (TOPIC, LESSONDATE, OBJECTIVE, STANDARD, ASSIGNMENT, STRATEGY, EVALUATION, CREATEDATE, DUEDATE, TID, CHANGES, COLOR)
  values
  ( ,
  ,
  ,
  ,
  ,
  ,
  ,
  SYSDATE,
  ,
  ,
  ,
  )

• Multiple entries to the DAQ Assistant

  Hello

  I’m doing my DAQ Assistant, in several (formed of an array) Boolean inputs where there is 1 digital output. (see attached software folder)

  Physically, I want a valve to open and close at a certain pace, where the user can install/control this pattern until the program starts.

  I think that the best way to do it is to have multiple Boolean values that the user can press or unpress.

  Before that, I started, I tried with only Boolean 1 where it worked perfectly.

  As seen on the attachment (error), it is possible to an easy problem to solve, but I just can’t figure it out, I’m stuck at my already made solution.

  I use USB6008.

  I hope that there is a gentle soul who can help out me.

  Best regards

  Kenneth G. Vejen

  Hi Kenneth.

  When the output to the generation mode is set to «sample 1», which means that whenever you call the DAQ Assistant will generate 1 sample. In order to generate 5 samples, you must therefore call 5 times.

  I have attached a modified version of your VI, which shows a way to archive it. However, be aware that the samples will be generated fast and not at 100 ms note your loop runs. It depends on your application, if it is as you want samples to be issued.

• How to give multiple entries in the process BPEL syn in Jdeveloper

  Hello

  I’m new to BPEL. I have created programs that takes only one input and after treatment poster single output. I would like to make a contribution of more than one runtime (for the name of the employee e.g., age, salary) and want to view multiple output after their treatment instead of just I am doing now. How can I do this by using synchronous BPEL process. Can you tell what will learn time for BPEL using google and the forums, for a person to 3 years in JAVA and new on BPEL exeperienced.

  Yogendra Rishishwar

  Hello

  You just need to change the XSD in your process.

  Someone posted something similar last week: How to change the entry and exit of BPEL process diagram

  Hope this will help you…

  Roman.

• When I add a bookmark, I get hundreds of multiple entries for the same bookmark in the recently added bookmarks folder and the bookmark tab. Difficulty?

  Adding a results of bookmark in 100’s of entries for this bookmark on the Bookmarks tab and in the recently added bookmarks folder. The only way to remove them is to click and delete each separate entry? Any idea what is happening or how to fix it? Thank you.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

• Obsolete devices in the AutoPlay list & several entries for the same devices

  I would like to remove 4 entries for «Canon PowerShot A75» on the list of automatic run settings since I no longer have this camera.  Can someone tell me how to remove these?  (I have Vista Home Premium SP2)

  Someone else has multiple entries in the auto playlist for the same device?  Someone managed to remove them?

  Vestalite,
  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Always back up the registry before making changes.  See this article on how to back up and restore the registry:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  It is possible to manually edit the system registry to remove the AutoPlay handlers. The AutoPlay handlers are stored in the following registry location:

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\Handlers\

  Above registry key stores the Settings Manager, which is the action to perform when selected on AutoPlay.

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\EventHandlers\

  Above registry key stores the names of different events, which contains associated managers. Which mean all entries added as value to the event will appear as an option when the particular event occurs and the trigger AutoPlay menu dialog box.

  Let us know if this solves your problem.

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Obsolete devices in the AutoPlay list & several entries for the same devices II (how to remove Iphone in Autoplay device)

  I read the article «obsolete devices in the AutoPlay list & multiple entries for the same features» and did what they said on the registry change, but I can’t seem to find what I’m looking for.

  I had an iphone and he sold on ebay, now in my autoplay menu, there is my iphone device listed in DEVICES. I would like to remove it, but there is no option to do this. I looked everywhere in the ‘managers’ and ‘eventhandlers’ regedit, but I can’t find the name of my iphone or whatever it is about the iphone in particular. So I hope that someone could lead me in the right direction and it would be very appreciated. Is there a specific code or name for the iphone in regedit?

  Hi arande1a,

  I would like to know what article you’re talking about, please give the link for the same.

  I suggest you try the following steps:

  Step 1: Disable Autorun

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) turn off the AutoPlay use for all media and devices check box, and then click Save.

  Restart the computer and check.

  Turn on AutoPlay

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) select the game to use automatic for all media and devices check box, and then click Save.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Let us know if you find iPhone mentioned in the following registry key location.

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\ device management

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones why do I get multiple contacts for the same person

  Recently, when I add a new contact the 9700 creates several entries. When I delete these multiple inputs, then it leaves about 10 spaces. If I let multiple entries for the same person, the next person that I add only then indicates once

  Why they appear more than once?

  How can I delete multiple entries so they do not reappear when I create the following entry?

  Help, please

  Try a simple reboot and see if the empty entries remain.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

• Satellite A200 (PSAE6) bought 2008, but the event log contains entries from 2007

  Given that I have buy my Satellite I have problems, most are a blue screen with auto restart.

  I found several problems dated April 2007, entries in the event log WHEN I only buy this machine on February 2008!

  Please someone explain me if this can be possible?

  For example:

  Nome registo:Microsoft — Windows-CodeIntegrity/Operational
  Origem: Microsoft-Windows-CodeIntegrity
  Data: 13/07/2007 14:02:45
  Event ID: 3001
  Category has: (1).
  BORN? Â? ? Â * vel: Aviso
  Palavras-chave:
  User: S-1-5-18
  Computador: LH-A0U969U2IED4:
  Code integrity determined that an unsigned kernel module system32\DRIVERS\CplIR.SYS is loaded in the system. Check with the Publisher to see if there is a signed version of the kernel module.

  One question;
  Did you buy this computer store camera and laptop boxed originally was?
  Vista was already configured and customized?

  Usually the OS should be pre-installed on laptop but shouldn’t t be configured and customized.

• Proving assistance to the entry in the event log

  Hi, I have to know if this event log reveals that my outlook office was opened in the 02.08.2012 at 18:00 and this information is essential to prove an entry not allowed in my outlook in my office.

  «ID: 6, name of the Application: Microsoft Office Outlook, Version of the Application: 12.0.4518.1014, Microsoft Office Version: 12.0.4518.1014.» This session lasted 502 seconds with 480 seconds of active time.  This session ended normally. »

  On the log screen date is: 02.08.2012 time: 18:00:51

  If there is someone who can confirm that this information shows this entry to my outlook is at 18:00 or if there are other possibilities other than the startup of outlook such as (log info can be a problem, time don’t point at the starting time of an outlook session upwards, but it shows something else etc.).

  I need real help that this information is very critical for legal issues and it is now regarded as a help at the entrance to my office email by someone else in the office.

  duyguz

  Hello

  The question you have posted is work-related and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.microsoft.com/Forums/en-us/categories.

• How to make the file Vi as of entry into the structure of the event?

  HIII all…

  I had problems when building a structure of the event. The entry in the file (format vi) is not a source of connection of the wires to connect the wire (shift register). For your information the vi that I create only contain a simple mathematical equation.

  I already have the new event handler example. but the entry of the file in this example (buy data.vi) have a source of connection. can someone help me?

  Thank you very much

  [email protected]

  Well, in your sub — VI you need to wire some inputs and outputs of your login Panel.  As I said, a LabVIEW basic skill that you will find in the tutorials.

  You have a number of entries to your Subvi.  The more you do not want to fix on a panel of connectors.  You may need to use a cluster to group them.

  To help you get started, here are the steps to connect a control or the indicator for the login Panel.

  1. open Subvi.

  2. right click on the icon at the top right.  Show the connector.

  3 hover over a block that you want to be a terminal connector, it will change to a coil of wire.  Click on.

  4. go to the control or the indicator on the front that you want to associate.  Click again.

  5. Repeat for the other controls and indicators needed and save your Subvi.  Now the Subvi in your main VI instance can have on connected wires.

  You must plan your login Panel so that the controls are on the left side of the Panel and indicators on the right.  This will allow the data who «throw» and «flow on» the Subvi in a normal search has left to the right orientation.

• Security event log getting the message «local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer» for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message «local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer» for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S — Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Live Mail — error verifying signature of emails cause multiple entries rfc822

  Is this a known bug, Windows Live Mail displays an error in the verification of signatures, if the signing certificate has multiple rfc822 entries in the subject alternative name extension and not the «first» is used to sign email? Is there a solution?

  See: A question of Hotmail or Windows Live Mail?
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/have-a-Windows-Live-Mail-or-Hotmail-question/8bd31c48-d1a7-49D6-a08c-9069aaeba2e5