SQL Server 2008 R2 Service Pack 2 SQL Server 2008 R2 Datacenter SQL Server 2008 R2 Developer SQL Server 2008 R2 Enterprise SQL Server 2008 R2 Standard Еще…Меньше
Симптомы
Предположим, что одно из указанных ниже обновлений были установлены на компьютер с Microsoft SQL Server 2008 R2 или установлен Microsoft SQL Server 2012:
-
6 накопительное обновление для SQL Server 2008 R2 Пакет обновления 1 (SP1) или более поздней версии
-
Накопительное обновление 1 для SQL Server 2008 R2 Пакет обновления 2 (SP2) или более поздней версии
В этом случае запустите инструкцию RESTORE FILELISTONLY для восстановления базы данных в SQL Server 2008 R2. Тем не менее происходит сбой операции восстановления. Кроме того появляется следующее сообщение об ошибке:
Сообщение 3241, уровень 16, состояние 1, строка 1
Семейство носителей на устройстве «<BackupFilePath>» сформировано неправильно. SQL Server не удается обработать семейства носителей.
Сообщение 3013, уровень 16, состояние 1, строка 1
ВОССТАНОВЛЕНИЕ FILELIST завершается аварийно.
Примечание При запуске Инструкции DBCC CHECKDB в ранних сборках SQL Server 2008 R2, возникают ошибки не согласованности, указывает на проблемы в носителе резервной копии. Следовательно резервная копия может быть восстановлена в этих ранних версиях.
Причина
Эта проблема возникает из-за накопительного обновления 1 для SQL 2008 R2 с пакетом обновления 2 и 5 накопительного обновления для SQL Server 2008 R2 SP1 выполнять проверку полноты базы данных при восстановлении базы данных. Тем не менее такая проверка не является обязательным для инструкцию RESTORE FILELISTONLY .
Эта проверка было включено в исправления, описанные в КБ 2685132. Дополнительные сведения о проверке полноты базы данных щелкните следующий номер статьи 2685132 в статье 2685132 базы знаний Майкрософт:
ИСПРАВИТЬ 2685132 : задание восстановления доставки журналов восстановление резервной копии журнала транзакций повреждены базы данных-получателя при выполнении задания резервного копирования на экземпляре SQL Server 2008 R2 или экземпляр SQL Server 2012 доставки журналов
Решение
Информация о накопительном пакете обновления
Накопительное обновление 9 для SQL Server 2012
Исправление, устраняющее эту проблему, сначала было выпущено в накопительное обновление 9. Дополнительные сведения о том, как получить этот накопительный пакет обновления для SQL Server 2012, щелкните следующий номер статьи базы знаний Майкрософт:
2867319 накопительного обновления 9 для SQL Server 2012Примечание. Поскольку построения являются накопительными, каждый новый выпуск исправление содержит все исправления и все исправления, входившие в состав предыдущих 2012 SQL Server исправления выпуска. Мы рекомендуем рассмотреть применение последнего выпуска исправления, содержащего это исправление. Для получения дополнительных сведений щелкните следующий номер статьи базы знаний Майкрософт:
2692828 SQL Server 2012 выполняется построение, выпущенных после выпуска SQL Server 2012
Накопительного обновления 5 для SQL Server 2012 Пакет обновления 1
Исправление этой уязвимости первого выпуска накопительного обновления 5. Дополнительные сведения о том, как получить этот накопительный пакет обновления для SQL Server 2012 Пакет обновления 1 щелкните следующий номер статьи базы знаний Майкрософт:
2861107 накопительного обновления 5 для SQL Server 2012 Пакет обновления 1Примечание. Поскольку построения являются накопительными, каждый новый выпуск исправление содержит все исправления и все исправления безопасности, которые были включены в Пакет обновления 1 для предыдущего SQL Server 2012 выпуска исправлений. Мы рекомендуем рассмотреть применение последнего выпуска исправления, содержащего это исправление. Для получения дополнительных сведений щелкните следующий номер статьи базы знаний Майкрософт:
2772858 SQL Server 2012 выполняется построение, выпущенных после выпуска SQL Server 2012 Пакет обновления 1
Накопительное обновление для 13 SQL Server 2008 R2 с пакетом обновления 1
Исправление этой проблемы сначала было выпущено в 13 накопительного обновления. Дополнительные сведения о том, как получить этот накопительный пакет обновления для SQL Server 2008 R2 SP1 щелкните следующий номер статьи базы знаний Майкрософт:
Пакет 13 2855792 накопительного обновления для SQL Server 2008 R2 SP1Примечание. Поскольку построения являются накопительными, каждый новый выпуск исправление содержит все исправления и все исправления, входившие в состав предыдущих SQL Server 2008 R2 SP1 исправления выпуска. Мы рекомендуем рассмотреть применение последнего выпуска исправления, содержащего это исправление. Для получения дополнительных сведений щелкните следующий номер статьи базы знаний Майкрософт:
2567616 SQL Server 2008 R2 выполняет построение, выпущенных после выпуска SQL Server 2008 R2 Пакет обновления 1
Накопительного обновления 7 для SQL Server 2008 R2 с пакетом обновления 2
Исправление этой уязвимости первого выпуска накопительного обновления 7. Дополнительные сведения о том, как получить этот накопительный пакет обновления для SQL Server 2008 R2 с пакетом обновления 2, щелкните следующий номер статьи базы знаний Майкрософт:
2844090 накопительного обновления 7 для SQL Server 2008 R2 с пакетом обновления 2Примечание. Поскольку построения являются накопительными, каждый новый выпуск исправление содержит все исправления и все исправления, входившие в состав предыдущих SQL Server 2008 R2 с пакетом обновления 2 выпуска исправлений. Мы рекомендуем рассмотреть применение последнего выпуска исправления, содержащего это исправление. Для получения дополнительных сведений щелкните следующий номер статьи базы знаний Майкрософт:
2730301 SQL Server 2008 R2 выполняет построение, выпущенных после выпуска SQL Server 2008 R2 Пакет обновления 2
Статус
Корпорация Майкрософт подтверждает, что это проблема продуктов Майкрософт, перечисленных в разделе «Относится к».
Временное решение
Чтобы обойти эту проблему, запустите инструкцию RESTORE FILELISTONLY , а также параметр CONTINUE_AFTER_ERROR .
Нужна дополнительная помощь?
Нужны дополнительные параметры?
Изучите преимущества подписки, просмотрите учебные курсы, узнайте, как защитить свое устройство и т. д.
В сообществах можно задавать вопросы и отвечать на них, отправлять отзывы и консультироваться с экспертами разных профилей.
SQL Server 2008 R2 Service Pack 2 SQL Server 2008 R2 Datacenter SQL Server 2008 R2 Developer SQL Server 2008 R2 Enterprise SQL Server 2008 R2 Standard More…Less
Symptoms
Assume that you have installed one of the following updates on a computer that has Microsoft SQL Server 2008 R2 or Microsoft SQL Server 2012 installed:
-
Cumulative Update 6 for SQL Server 2008 R2 Service Pack 1 (SP1) or later versions
-
Cumulative Update 1 for SQL Server 2008 R2 Service Pack 2 (SP2) or later versions
In this situation, you run a RESTORE FILELISTONLY statement to restore a database in SQL Server 2008 R2. However, the restore operation fails. Additionally, you receive the following error message:
Message 3241, Level 16, State 1, Line 1
The media family on device ‘<BackupFilePath>’ is incorrectly formed. SQL Server cannot process this media family.
Message 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
Note If you run the DBCC CHECKDB statement in earlier builds of SQL Server 2008 R2, you experience no consistency error that indicates problems in the backup media. Therefore, the backup can be restored in these earlier versions.
Cause
The issue occurs because Cumulative Update 5 for SQL Server 2008 R2 SP1 and Cumulative Update 1 for SQL 2008 R2 SP2 perform a database completeness validation when the database is restored. However, this validation is not necessary for the RESTORE FILELISTONLY statement.
This validation was included in the hotfixes that are described in KB 2685132. For more information about the database completeness validation, click the following article number 2685132 to view the article 2685132 in the Microsoft Knowledge Base:
2685132 FIX: The log shipping restore job restores a corrupted transaction log backup to a secondary database when you run a log shipping backup job on an instance of SQL Server 2008 R2 or an instance of SQL Server 2012
Resolution
Cumulative update information
Cumulative Update 9 for SQL Server 2012
The fix for this issue was first released in Cumulative Update 9. For more information about how to obtain this cumulative update package for SQL Server 2012, click the following article number to view the article in the Microsoft Knowledge Base:
2867319 Cumulative update package 9 for SQL Server 2012Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2012 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2692828 The SQL Server 2012 builds that were released after SQL Server 2012 was released
Cumulative Update 5 for SQL Server 2012 Service Pack 1
The fix for this issue was first released in Cumulative Update 5. For more information about how to obtain this cumulative update package for SQL Server 2012 Service Pack 1, click the following article number to view the article in the Microsoft Knowledge Base:
2861107 Cumulative update package 5 for SQL Server 2012 Service Pack 1Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2012 Service Pack 1 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2772858 The SQL Server 2012 builds that were released after SQL Server 2012 Service Pack 1 was released
Cumulative Update 13 for SQL Server 2008 R2 SP1
The fix for this issue was first released in Cumulative Update 13. For more information about how to obtain this cumulative update package for SQL Server 2008 R2 SP1, click the following article number to view the article in the Microsoft Knowledge Base:
2855792 Cumulative update package 13 for SQL Server 2008 R2 SP1Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 R2 SP1 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2567616 The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 Service Pack 1 was released
Cumulative Update 7 for SQL Server 2008 R2 SP2
The fix for this issue was first released in Cumulative Update 7. For more information about how to obtain this cumulative update package for SQL Server 2008 R2 SP2, click the following article number to view the article in the Microsoft Knowledge Base:
2844090 Cumulative update package 7 for SQL Server 2008 R2 SP2Note Because the builds are cumulative, each new fix release contains all the hotfixes and all the security fixes that were included with the previous SQL Server 2008 R2 SP2 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
2730301 The SQL Server 2008 R2 builds that were released after SQL Server 2008 R2 Service Pack 2 was released
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the «Applies to» section.
Workaround
To work around this issue, run the RESTORE FILELISTONLY statement together with the CONTINUE_AFTER_ERROR option.
Need more help?
Want more options?
Explore subscription benefits, browse training courses, learn how to secure your device, and more.
Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.
Summary: SQL database error 3241 is a media-related error that occurs when restoring a database from a backup. This error is usually caused due to a corrupted backup file. Read this blog for complete details on the error. Also, learn about the most effective solutions to fix the 3241 SQL error. You can also use a backup extractor tool to extract data from the corrupted backup and restore the database.
Contents
- What Causes SQL Database Error 3241, ‘RESTORE HEADERONLY is Terminating Abnormally’?
- Before We Proceed
- Solutions to Resolve SQL Database Error 3241
- Alternative Solution to Restore Database from Backup
- End Note
At times, when restoring a SQL Server database from a backup, you might encounter the 3241 error along with an error message ‘RESTORE HEADERONLY is terminating abnormally’.
What Causes SQL Database Error 3241, ‘RESTORE HEADERONLY is Terminating Abnormally’?
The error is caused when a backup file you are trying to restore gets corrupt due to an issue with the hardware (i.e., hard disks, network storage, etc.) or because of a malware attack. Also, you may encounter the error if you restore a backup from a recent version of SQL Server to an earlier version of SQL Server.
Note: If you get error 3241 when executing the ‘RESTORE FILELISTONLY’ statement, the error is caused due to a bug in SQL Server. To resolve the issue, install the cumulative updates released by Microsoft. For more information, read this KB.
Before We Proceed
Before attempting the solutions to troubleshoot the error, ensure the backup is readable by running the following T-SQL statement:
RESTORE VERIFYONLY FROM DISK=’ <path_to_your_backup>.BAK’
This command will check the backup file and returns a message stating whether the backup is useable or not.
If there is no problem with the backup, check your Windows System event logs for any hardware-related or networking issues. Also, ensure that you’re not restoring a database from a backup created on a higher version of SQL Server to a lower version.
If there is some issue with the backup file, proceed with implementing the following solutions.
Solutions to Resolve SQL Database Error 3241
Here’s what you can do to fix the error 3241 – that occurs due to corruption in the backup set:
- Locate another valid backup file to restore the database
- Create a new backup if the database is accessible
Alternative Solution to Restore Database from Backup
If you fail to restore the backup correctly, try to extract data from the corrupted backup (BAK) file using Stellar Repair for MS SQL Technician. The software provides a backup extractor tool to help the users recover data from a corrupt BAK file easily and quickly. After extracting the backup data, the software saves the data in a new or an existing database. You can evaluate the software functionality by downloading the demo version from the link below.
For detailed steps on using the backup extractor tool for data recovery, read this: How to Recover SQL Server Database from a Corrupt Backup File?
Stellar Repair for MS SQL Technician also comprises tools to repair a corrupt SQL database MDF, NDF files. Also, it provides a utility to reset the lost or forgotten password of master.mdf file.
End Note
You might fail to perform a backup and restore operation on a SQL Server database. And, get an error message that reads: ‘Restore HEADERONLY is terminating abnormally, Microsoft SQL Server error 3241’. It happens when the backup you’re trying to restore is corrupt. In that case, check if you have any other backup copy you can use to restore the database or create a new backup set. If the issue persists, use Stellar Backup Extractor for MS SQL to retrieve data from a backup file.
Once you’ve retrieved your backup data and restored the database, you must prevent the 3241 media error from reoccurring. For this, do the following:
- To avoid backing up a corrupt database, ensure that the Backup CHECKSUM option is enabled. For more information, see Possible Media Errors During Backup and Restore (SQL Server).
- Use trace flag 3023 to enable CHECKSUM option when using backup utilities to perform a backup; this will ensure that the data is backed up in a healthy state. Besides, generation of backup checksum during a restore process ensures that the backup media is not damaged when transferring a copy of the SQL database.
About The Author
Charanjeet Kaur
Charanjeet is a Technical Content Writer at Stellar®who specializes in writing about databases, e-mail recovery, and e-mail migration solutions. She loves researching and developing content that helps database administrators, organizations and novices to fix multiple problems related to MS SQL and MySQL databases and Microsoft Exchange.
SQL Server
Fix SQL Server 3241 Error When Restoring Database from SQL Backup File
Raj |
Modified: July 19th, 2022 | 5 Minutes Reading
Are you tired of encountering Microsoft SQL Server error 3241 restore headeronly is terminating abnormally repeatedly when restoring a database from a .bak file? No solution found to fix this error? If yes, then this blog will help you out to recover SQL Server database restore error 3241 with possible methods.
Here, we will discuss the causes of the SQL Server 3241 error the media family on device is incorrectly formed, the manual solution to fix this issue and automated solution to resolve SQL backup restore error 3241.
This is the error that appears when restoring SQL BAK file in SQL Server Database.
Msg 3241, Level 16, State 7, Line 1
The media family on device 'xyz.bak' is incorrectly formed. SQL Server cannot process this media family.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally
Causes of SQL Server 3241 Error
There can be multiple causes for SQL Server Error 3241 when restoring a database from backup such as-
- If you trying to restore a database from a backup file that was created on a later version of SQL Server to an earlier version of SQL Server, then the SQL Server 3241 error occurs. You can only restore a .bak file to the same or later SQL Server version.
- This Microsoft SQL Server error 3241 restore headeronly is terminating abnormally may also occur if the backup file is corrupted that restoring to the SQL Server Database. The backup file can be corrupted due to file uploaded using FTP Text Mode.
- There is also a possibility if the SQL Backup Agent service does not have the necessary access permission. To restore the database from a .bak file to the SQL Server, the SQL Backup Agent Service should have read permission to access the folder which contains the backup file.
Manual Solution to Fix Media Family is Incorrectly Formed Error
Before starting the process of restoring the SQL database from the .bak file, you must first verify the version of your SQL Server. If you don’t have the same version of SQL Server in which the backup (.bak) file was created, then upgrade the SQL Server database to the same or higher version.
#Strategy 1:
The SQL Backup Agent Service should have necessary access permission to restore SQL Server database from backup (.bak) file and avoid Microsoft SQL Server error 3241 restore headeronly is terminating abnormally.
#Strategy 2:
If your backup file was corrupted because the file uploaded using FTP Text Mode, then you need to upload the backup file using FTP in Binary Mode and then restore the SQL .bak file.
These are two manual solutions that will help you to resolve MS SQL Server error 3241 while restoring a database. There is no guarantee that this SQL error 3241 the media family on device is incorrectly formed will resolve completely and successfully using this manual method.
If your SQL backup file is corrupted and unable to repair, then you must use a third-party solution that will repair corrupt SQL .bak file effortlessly and completely.
Automated Solution to Fix SQL Server 3241 Error When Restoring Database
SQL Server Backup Recovery software is the best and successful solution to resolve the media family on device is incorrectly formed 3241 error. It is specially designed with the advanced features that will allow all types of users to completely repair corrupt SQL backup file.
This application scan and recover all tables, views, functions, keys, triggers and other elements from the .bak file. It gives permission to open and view the .bak file before restoring to the SQL Server Database or SQL Server Scripts. It supports all SQL Server versions such as SQL Server 2017, 2016, 2014, 2012, 2008, 2008 R2 to fix and restore SQL database from .bak file.
Free Download SQL Backup recovery Purchase Now SQL Backup Recovery
With the help of this tool, you can easily resolve Microsoft SQL Server 2008 R2 error 3241, SQL Server 2005 error 3241, and other SQL Server versions error.
Additional Features of SQL Backup Recovery Tool
The software application offers multiple beneficial features to its users for resolving Microsoft SQL Server error 3241 restore headeronly is terminating abnormally. Some of them are as follows:-
1. Able to repair & recover corrupt .bak file of Microsoft SQL Server 2017, 2016, 2014, 2012, 2008, 2008 R2, and other below versions.
2. Fix corrupted SQL backup file with all tables, views, stored procedures, rules, triggers, and functions.
3. Provides option to restore multiple BAK files and restore it on a live SQL Server Database using login credentials.
4. No file size limitations to repair & restore corrupt SQL .bak file with all database objects.
5. Compatible with all Windows Operating System such as Windows 10, 8.1, 8, 7, and so on.
6. Resolve Microsoft SQL Server 3241 error to restore SQL database from .bak file to a new database or an existing database.
Steps to Fix SQL Server Error 3241
Here, in this section, we will disclose the instructions to fix restore headeronly is terminating abnormally SQL error 3241 without data loss. You just have to follow all the steps sequentially. Let’s begin:
Step 1: Install & run the eminent tool on your system.
Step 2: Add multiple corrupt BAK file & click on OK button.
Step 3: Then, preview recovered file records.
Step 4: Export repaired SQL BAK file records successfully.
The Final Words
Many users are struggling with a SQL Server error 3241 when restoring a database from a .bak file. In this write-up, we mentioned both manual and automated solution to recover Microsoft SQL Server error 3241 restore headeronly is terminating abnormally.
If your error cannot be resolved with the manual approach because the SQL BAK file is corrupted, you must use the automated solution that will repair corrupt SQL Server backup and restore a .bak file to the SQL Server database.
Arik777
12.11.15
✎
22:54
MS SQL SERVER 2008 восстонавливаю архив базы (*.bak) сделанный полным методом из тогоже скуля.Пытаюсь восстановить в пустую базу, выбираю восстановить с устройства, выбираю bak файл и тут выходит вот такая ерунда:
MS SQL — ошибка 3241 «Семейство носителей на устройстве * сформировано неправильно»
В рунете много писали о том что это при переходе с версии SQl, что архив неполный и т.д.
Я точно архивировал полным методом и точно стоит то же скуль.
Arik777
12.11.15
✎
22:55
Прошу местных гуру помочь мне! Заранее спасибо.
Господин ПЖ
12.11.15
✎
22:57
чо помогать то…
архив битый если со скулем все норм.
m$ на бэкапы гарантий не дает — он отдельно проверяется на адекватность
Господин ПЖ
12.11.15
✎
22:58
ЗЫ за бэкапирование «сразу по сети» надо одмину в голову гвоздь забить — это я на всякой…
Arik777
12.11.15
✎
23:01
в том то и дело этих архивов у меня куча на каждый день, только вот неверится что они все битые. со скулем все норм. если создать пустую базу допустим «test» и сделать архив, а потом восстановить из этого архива то все норм. А вот другие бэкапы другой базы ну никак нехотят восстанавливаться.
Arik777
12.11.15
✎
23:06
Согласен за гвоздь можно и вбить, но вот поверить немогу что все бэкапы битые.
trad
12.11.15
✎
23:13
Иногда вот думаешь, что ресторишь в 2008, а на самом деле 2005
инстанс точно один — 2008?
oleg_km
12.11.15
✎
23:15
Может проверить исходную базу? Типа DBCC CHECKDB
Arik777
12.11.15
✎
23:17
Ставил точно один 2008. Запускаю SQL Managment 2008.
Господин ПЖ
12.11.15
✎
23:19
>но вот поверить немогу что все бэкапы битые
теоретически вполне возможно если по сети + нет проверки
Arik777
12.11.15
✎
23:20
DBCC CHECKDB немогу сделать у меня только бэкапы. Исходная база была удалена по просьбе заказчика. Я и не переживал что удаляю так как был уверен что восстановлю при необходимости.
Arik777
12.11.15
✎
23:21
Нет бэкапы не по сети а на логический диск.
Господин ПЖ
12.11.15
✎
23:22
тогда странно если прямо «все»… с диском все нормально?
Arik777
12.11.15
✎
23:27
На счет диска тоже грешил. Ему блин полгода, проверял разными средствами. Единственное на что могу хоть как грешить так это на обновления винды что ставились дня 3 назад. Но вот причем тут SQL непойму.
Arik777
12.11.15
✎
23:29
Я вот пробую создать новую базу залить туда 1с, затем делаю бэкап, затем востанавливаю и блин все норм.
trad
12.11.15
✎
23:29
Sms2008 может и с 2005 сервером работать. Посмотри в свойствах сервера
Arik777
12.11.15
✎
23:33
Прошу прощения где смотреть свойства сервера. SQL SERVER 10.0.1600
Господин ПЖ
12.11.15
✎
23:35
SQL Server 2008
Господин ПЖ
12.11.15
✎
23:38
а бэкап например с SQL Server 2008 r2
а это «четыре разных человека»
Arik777
12.11.15
✎
23:40
Согласен что это разные вещи, но ставил я только один и один раз…
Arik777
12.11.15
✎
23:42
Я понимаю все это, поэтому и решил обратиться сюда. Я уже две сутки пытаюсь понять в чем дело. уже на др. компе ставил разные версии SQL и ничего, ставил и SQL 2012 и таже беда.
Господин ПЖ
12.11.15
✎
23:44
в sql 2000 была подобная ошибка… лечилось sp1
Arik777
12.11.15
✎
23:50
лечилось sp1.
да но на другм компе стоит вин сервер 2012 и Скуль 2012.
Arik777
12.11.15
✎
23:51
Я так понимаю что эти бэкапы уже невосстановить…
Йохохо
12.11.15
✎
23:53
не заливай в пустую, сделай ресторе в новую
Йохохо
12.11.15
✎
23:55
(19) ничего разного нет, 2008р2 последний кто помнит старые форматы
Arik777
12.11.15
✎
23:57
А как узнать скуль р2 или нет?
trad
12.11.15
✎
23:58
10.0 — 2008
10.50 — 2008r2
trad
12.11.15
✎
23:59
посмотри еще колонки softwareversion после этих команд
RESTORE HEADERONLY FROM DISK = ‘d:\backups\БекапКоторыйВосстанавливается.bak’
RESTORE HEADERONLY FROM DISK = ‘d:\backups\БекапКоторыйНеВосстанавливается.bak’
Йохохо
13.11.15
✎
00:01
(28) в 2008 уже можно манипулятором типа мышь
trad
13.11.15
✎
00:04
(29) научишь?
Arik777
13.11.15
✎
00:09
Рабочая: major 10, minor 0, build 1600
Нерабочая:
Сообщение 3241, уровень 16, состояние 0, строка 1
Семейство носителей на устройстве «E:\base.bak» сформировано неправильно. SQL Server не может обработать это семейство носителей.
Сообщение 3013, уровень 16, состояние 1, строка 1
RESTORE HEADERONLY прервано с ошибкой.
Arik777
13.11.15
✎
00:10
Видимо архив точно какойто битый. Может обновить скуль до р2?
trad
13.11.15
✎
00:48
(31) попробуй выполнить эту команду со стороны 2012
Tateossian
13.11.15
✎
01:09
Если не большой .bak могу у себя на серваке попробовать восстановить.
Tateossian
13.11.15
✎
01:09
(34) Скажем, до 10 Гб
Arik777
13.11.15
✎
01:48
бак 6 мб
Arik777
13.11.15
✎
01:48
базе 1 месяц
Arik777
13.11.15
✎
01:49
Если можешь проверь. Буду очень благодарен…