Before you do anything else, you’ll want to completely uninstall the driver. Go to the Apps page of your Settings and wait a minute or so for the list of installed apps to be populated, then scroll down until you see the Yamaha driver listed, click on it, and select uninstall. (I’m not in front of my Windows computer right now so I’m going by memory. If you have trouble finding it, I’ll look on my computer so I can give more specific detailed instructions.)
Are you sure it’s a DGX-600, or did you mean to type DGX-660? There’s no DGX-600 listed on Yamaha’s web site. It doesn’t matter as far as which version of the driver to use, but I wanted to check whether it has MIDI DIN ports or only a USB TO HOST port.
If it’s actually a DGX-660, you might not even need to use a driver with it, because it should be class compliant. What software are you trying to use with it? Does it show up as an available MIDI device even without installing a driver? (It will most likely be listed as “Digital Keyboard,” “Digital Piano,” or something like that, rather than as the specific model number.) If it does show up, you don’t need to worry about installing the driver— although you can still install it if you wish.
Even if the keyboard doesn’t show up as an available MIDI device with no driver installed, it should at least show up in your Windows system (under Devices) as an unknown USB device. If it isn’t showing up at all, then the next step is to verify that you’re using the correct type of USB connection.
You MUST use a USB 2 cable, NOT a USB 3 cable. I think you can tell them apart based on the color inside the connector— I think USB 3 cables and ports usually have blue parts inside their connectors. (If you aren’t sure what to look for, search for “how to identify usb 3.”) It is probably also best to plug the USB 2 cable into a USB 2 port, rather than into a USB 3 port— but if your computer doesn’t have a USB 2 port, then at least be certain to use a USB 2 cable. If it turns out that you’ve been trying to use a USB 3 cable, then that’s most likely the problem right there, and switching to a USB 2 cable may resolve the connection issue.
By the way, you also want to make sure you’re using a good USB cable, because the wires inside of a cable can get broken, especially if you’ve been winding and unwinding the cable a lot when putting it away and getting it back out. Try using the cable with some other device to verify that it’s working properly.
If you do need or want to install the Yamaha USB-MIDI driver, then first make sure you’ve uninstalled the failed installation. Furthermore, before you try to reinstall the driver you must make sure the keyboard is connected to your computer, is turned on, and is detected as a USB device.
The version of the driver that you choose— 32 or 64 bits— must match your operating system, so if you have a 64-bit OS then you must use the 64-bit driver.
You want to use the newest version for Windows 10, since that’s the version of Windows you have. (An older Windows 10 version might also work, but the newest version is always best in case there were any fixes that might have an impact.)
Install the driver while the keyboard is connected and turned on, and the driver should be able to find it.
If these suggestions don’t help, please let us know so we can take it from there.
Купил цифровое пианино, долго сомневался по поводу USB to HOST и что данное пианино можно подключить к фрути лупс как midi клавиатуру. В комплекте нет USB шнура, поэтому я использовал ДВУХМЕТРОВЫЙ шнур от принтера, при подключении к компьютеру, была выдана ошибка «устройство работает не правильно», при попытке поставить драйвер, вылезла такая ошибка error 25001 no device is connected, способов решающих эту проблему я не нашёл в интернете, хотя иногда мелькал совет использовать короткий USB шнур. В отчаянии я так и сделал и о чудо, драйвера стали и fl studio увидела моё пиано.
В итоге купил качественный метровый позолоченнй шнур. И всё заработало.
Купите мне чашечку кофе, если статья оказалась полезной.
Купил цифровое пианино, долго сомневался по поводу USB to HOST и что данное пианино можно подключить к фрути лупс как midi клавиатуру. В комплекте нет USB шнура, поэтому я использовал ДВУХМЕТРОВЫЙ шнур от принтера, при подключении к компьютеру, была выдана ошибка «устройство работает не правильно», при попытке поставить драйвер, вылезла такая ошибка error 25001 no device is connected, способов решающих эту проблему я не нашёл в интернете, хотя иногда мелькал совет использовать короткий USB шнур. В отчаянии я так и сделал и о чудо, драйвера стали и fl studio увидела моё пиано.
В итоге купил качественный метровый позолоченнй шнур. И всё заработало.
Купите мне чашечку кофе, если статья оказалась полезной.
Topic: PSR-E363 not installing USB MIDI driver Error 25001 (Read 28010 times)
0 Members and 1 Guest are viewing this topic.
guiboos
Hello,
I�ve just bought my PSR-E363 a week ago. I have 2 notebooks with Windows 10 (64-bit) latest update, one MACBOOOK and 2 cables USB available. I�ve mada all suggested steps (only the Yamaha-PC cable plugged, and then Turn ON Yamaha PSR-E3636). It detects DIGITAL KEYBOARD at Windows DEVCICE MANAGER. When I run the USB-MIDI Driver V3.1.4 for Win 10/8.1/8/7 SP1 (64-bit) (latest version) it stops with the Error 25001 — (no device (hardware) found. Then I�ve installed the Yamaha Steinberg USB Driver and It appears at the SOUND (CONTROL PANEL) as both playing and recording tabs. But I just can�t install the USB -MIDI driver. I�ve tried all combinations of cables and notebooks. The MACBOOK installs the driver but not detects the YAMAHA KEYBOARD as MIDI device. Then I went to the store I�ve bought it and took my notebook and cables to test other YAMAHA KEYBOARDS (E463 and another E363) with the same results I�ve got at home. What am I doing wrong?
Logged
yado70
Logged
I think that with the PSR-E453/PSR-EW400 as well as the PSR-E363/PSR-EW300/YPT-360 you’re supposed to install the Steinberg USB driver, and only that driver, not the Yamaha USB driver. I think the Steinberg driver is for both USB-audio and USB-MIDI, while the Yamaha driver is for USB-MIDI only. The PSR-E363’s USB connection carries audio and MIDI data simultaneously, and the driver needs to be able to understand the data coming through the USB connection. I don’t think the Yamaha driver can understand the combined audio and MIDI data— it isn’t programmed to pick out the MIDI data and ignore the audio data— which is why it can’t detect the keyboard as you’re expecting. So you need the Steinberg driver, which is programmed to handle both types of data.
Likewise, if the situation were reversed and you were trying to install the Steinberg driver with a Yamaha keyboard that has USB-MIDI but not USB-audio, I think you would also get an error, because the Steinberg driver is programmed to expect both types of data in the USB signal and would not be able to handle the lack of audio data in the USB signal.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
guiboos
Hi,
I just couln’t install that MIDI mapper You’ve said, yado70. I’ve put the PLWMidiMap.cpl file at c:windowssystem32 and the Control Panel didn’t recognized it.
Thanks for you reply, SeaGtGruff. Is there any other means to test MIDI?
Logged
You shouldn’t need a MIDI mapper with Windows 10. But if you just want to check whether the computer is receiving MIDI data, or would like to monitor its MIDI data, there’s a little utility program called «MIDI-OX» that lets you monitor MIDI data, or route MIDI data from one MIDI port to another, and other functions.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Yudaasta
Hii, i have the same problem during installation driver. Did you find the solution for this problem? My keyboard psr e363 also. Need your help. Thank you
Logged
I have a PSR-EW400, which uses the same USB-Audio/MIDI driver as the PSR-E363— and, like the PSR-E363, it’s USB-MIDI class-compliant, so it shouldn’t need a driver.
When I connected my PSR-EW400 to my computer for the first time (just a moment ago), Windows said it was setting up the DIGITAL KEYBOARD device. Then it said DIGITAL KEYBOARD is ready to use. I started up my main DAW (Acoustica Mixcraft), and DIGITAL KEYBOARD shows up as an external instrument. I was able to create a simple 1-bar loop, complete with Bank/Program messages, and sequence it to the keyboard, no problem. I did not need to install a driver at all. So for a MIDI connection you don’t need to install the driver.
I haven’t tried to see if I can record the audio over the USB connection without installing the driver, but will try it next.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Okay, the computer wouldn’t see the PSR-EW400 as an audio device without the driver installed.
I installed the latest version of the driver— https://usa.yamaha.com/support/updates/yamaha_steinberg_usb_driver_for_win.html— but I didn’t follow the installation instructions exactly; in particular, I did not turn off my computer first as requested in the instructions.
— I turned off my PSR-EW400.
— I unplugged the USB cable from my computer. (I prefer to leave the USB cable plugged into the back of my PSR-EW400 to minimize the number of times I plug in and unplug the cable, to avoid any unnecessary «wear and tear» on the port.)
— I installed the driver. At first the installation acted like it wasn’t doing anything— the progress indicator didn’t even start moving for a while— but once it finally got going it installed quickly.
— After the installation was over, I reconnected the USB cable to the computer.
— I turned on the PSR-EW400.
— I started my DAW again and verified that DIGITAL KEYBOARD-1 showed up as a MIDI device. (Interestingly enough, it was listed as just DIGITAL KEYBOARD, without the «-1» on the end, when I was using it as a class-compliant USB-MIDI device before installing the driver.)
— I verified that DIGITAL KEYBOARD was showing up as an audio device as well. (I forget the exact wording, but I believe it said «Line» in there somewhere.) I armed an audio track and was able to record myself playing the keyboard.
— When I played back the recorded audio track, it would not play through my computer’s speakers, although I think that was something to do with Steam (the video game platform), because Mixcraft said that my default audio devices were Steam something-or-other. But when I went into Mixcraft preferences and went to the audio setup, I was able to select DIGITAL KEYBOARD as the default audio input device and audio output device. Then I was able to play back the recorded audio track and hear it through my keyboard.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
By the way, I notice that Yamaha’s USA site is listing the standard USB-MIDI driver for the PSR-EW410, which is definitely the wrong driver for it. I don’t see any driver listed for the PSR-E363, but you need the Yamaha Steinberg driver, version 1.10.0— the one I linked to in my previous post— not Yamaha’s standard driver which is currently at version 3.1.4. The standard driver will not work, because it will not be able to understand the USB-audio portion of the data, which is why it won’t recognize the PSR-E363. As long as you use the correct driver, it should work.
However, I should also mention that you need to use USB 2, not USB 3. If your computer or laptop doesn’t have a USB 2 port, try at least using a USB 2 cable, as the manual specifically says that you should not use a USB 3 cable.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
Hi.
I have a similar problem here.
I have PSR E363, trying to connect to windows 10 64 bit but failed.
I already download the updated usb driver (um314164), I cannot install the driver because of error 25005. What does error 25005 mean?
this problem appear when I uninstall all of my usb port driver because of another problem and after that I failed to install the usb midi driver.
I already install steinberg usb driver (YSUSB_V1100_Win) that you suggested earlier but it doesn’t work too.
My device manager detected digital keyboard but with [!] sign, so in my understanding it must be driver problem.
When the digital keyboard usb success to install before the problem, my PSR is detected in Ableton perfectly.
please help me 
« Last Edit: February 25, 2018, 02:36:24 PM by hsatrio »
Logged
Logged
I can’t find any specific information on the web about error 25005, because it could mean different things in different programs, but the general meaning seems to be— as panos suggested— that the installation wasn’t successful. The specifics of why it wasn’t successful is the part that could vary depending on the program.
However, as I’ve said before, the USB-MIDI driver that you’re trying to install is the wrong one. Apparently it can’t detect the PSR-E363 correctly, probably due to the fact that the PSR-E363’s USB signal carries audio information as well as MIDI information, so the data doesn’t have the expected format. And if the installation program can’t find an attached keyboard that it understands, the installation will fail.
But you don’t need to install that driver for the PSR-E363, and you shouldn’t try to install it.
Here’s what I recommend:
(1) Click on the Notifications icon— the square caption icon on the right side of the task bar— and when the notifications panel slides into view from the right side of the screen, click on the «All settings» option.
(2) In the «Settings» window, click on the «Apps» option, then be patient as Windows populates the «Apps & features» list, which might take a few minutes if you have a lot of programs installed.
(3) Scroll down to the bottom of the list and look for any programs that start with «Yamaha.» If you see «Yamaha USB-MIDI Driver» listed, click on it so you get the «Modify» and «Uninstall» buttons, then click on the «Uninstall» button.
(4) If prompted to do so, restart Windows, then repeat steps 1 and 2. Then scroll down and see if «Yamaha Steinberg USB Driver» is listed. If it is, click on it, then click on the «Uninstall» button.
Note that you should not need to install the Yamaha Steinberg USB Driver at all unless you want to use the PSR-E363’s USB-audio, because its USB-MIDI should work without needing to install that driver.
If you do want to use the USB-audio, disconnect the PSR-E363 from the computer before you try to install the Yamaha Steinberg USB Driver. Then install that driver, reconnect the PSR-E363 to the computer, and see if it works as it should in your DAW.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
Thank you all for the quick replay. I really appreciate it.
right now, I already install asio4all from the beginning, I use focusrite scarlett solo and I use Ableton for my DAW software.
I already uninstall the two USB driver (steinberg and yamaha) but Ableton still cannot detect my PSR.
I was succeeded to connect my PSR to Ableton before, I’m bit confused why Ableton cannot detect my PSR right now.
If the PSR is succeeded to connect, Ableton gave a signal in the right corner of the apps when you push any button. In my case, Ableton didn’t give a signal at all.
Also, Ableton does not provide digital keyboard option on link midi preferences and in device manager the digital keyboard gave me sign [?].
did you know what is wrong with my keyboard or computer?
My usb hub is working fine for another device.
I really confuse
Logged
If you’re trying to use your PSR-E363 with a USB hub, it most likely will not work. I believe the manual says that you cannot connect the PSR-E363 to a USB hub, that it must be connected directly to a USB port on the computer.
Are you connecting the PSR-E363 to the Focusrite? I don’t think that will work, either— unless you’re connecting only the keyboard’s audio out to the Focusrite. But if you connect the PSR-E363 directly to the computer, you should be able to use the PSR-E363’s USB audio rather than needing to go through an audio interface.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
No, I didn’t connect my PSR to Focusrite and I connect my PSR directly from USB Port and still cannot detect any signal.
I cannot connect to Yamaha apps too
Is it my problem is my usb port?
« Last Edit: February 25, 2018, 11:35:00 PM by hsatrio »
Logged
Maybe you could download a free program that connects with midi keyboards like synthesia or something, to see if your computer can indentify your psr at least as a midi keyboard.
Logged
this problem appear when I uninstall all of my usb port driver because of another problem
Without knowing what the other problem was that originally led you to uninstall all of the USB port drivers— and without knowing what those USB port drivers were— it’s difficult to say what’s wrong.
It sounds like you’re saying you uninstalled all USB drivers, even the ones your operating system was using, not just the Yamaha USB drivers.
If that’s the case, you might need to do some sort of repair of the operating system— or, if you have a system restore point from before all of the problems started, restore back to that point and see if it fixes things.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
systernthal
Okay, the computer wouldn’t see the PSR-EW400 as an audio device without the driver installed.
I installed the latest version of the driver— https://usa.yamaha.com/support/updates/yamaha_steinberg_usb_driver_for_win.html— but I didn’t follow the installation instructions exactly; in particular, I did not turn off my computer first as requested in the instructions.
— I turned off my PSR-EW400.
— I unplugged the USB cable from my computer. (I prefer to leave the USB cable plugged into the back of my PSR-EW400 to minimize the number of times I plug in and unplug the cable, to avoid any unnecessary «wear and tear» on the port.)
— I installed the driver. At first the installation acted like it wasn’t doing anything— the progress indicator didn’t even start moving for a while— but once it finally got going it installed quickly.
— After the installation was over, I reconnected the USB cable to the computer.
— I turned on the PSR-EW400.
— I started my DAW again and verified that DIGITAL KEYBOARD-1 showed up as a MIDI device. (Interestingly enough, it was listed as just DIGITAL KEYBOARD, without the «-1» on the end, when I was using it as a class-compliant USB-MIDI device before installing the driver.)
— I verified that DIGITAL KEYBOARD was showing up as an audio device as well. (I forget the exact wording, but I believe it said «Line» in there somewhere.) I armed an audio track and was able to record myself playing the keyboard.
— When I played back the recorded audio track, it would not play through my computer’s speakers, although I think that was something to do with Steam (the video game platform), because Mixcraft said that my default audio devices were Steam something-or-other. But when I went into Mixcraft preferences and went to the audio setup, I was able to select DIGITAL KEYBOARD as the default audio input device and audio output device. Then I was able to play back the recorded audio track and hear it through my keyboard.
Hello — I’ve tried everything you’ve listed here. I keep seeing the Steinberg listed under audio devices, but it is grayed out and I am unable to check the box. Any further ideas? Thanks very much.
Logged
I’m leery of uninstalling anything unless I’m sure I have all of the necessary files to reinstall it again.
Regarding the USB 2 vs. USB 3 issue, I’ve heard time and time again that USB 3 is backward-compatible with USB 2, therefore it’s okay to use a USB 3 port— but that doesn’t jive with what I’ve heard from people who couldn’t get a connection to work properly until they stopped trying to use a USB 3 port and switched to a USB 2 port. I don’t have any personal experience with this issue— yet— because so far all of my Windows computers and laptops have had only USB 2 ports. But as far as newer computers are concerned, USB 3 ports are becoming the norm and USB 2 ports are becoming the exception— or might not even be included at all.
And then there’s the USB cable. I believe the PSR-E manuals specifically say to use USB 2 cables, not USB 3 cables, and don’t say anything about the ports. But I don’t know whether plugging a USB 2 cable into a USB 3 port will resolve any issues being caused by a keyboard’s inability to interface as expected using USB 3.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
However, as I’ve said before, the USB-MIDI driver that you’re trying to install is the wrong one.
But you don’t need to install that driver for the PSR-E363, and you shouldn’t try to install it.
I’m still confused about this one. Some comments that I’ve read before was «Yamaha PSR-E series is NOT USB-class-compliant (for example you can’t use it Linux), so USB-Midi driver is necessary». Maybe Win10 have their own Generic USB-Midi driver.
Logged
The earliest PSR-E models were not class-compliant.
But according to what Yamaha told one of our members when he contacted them for clarification, beginning sometime around the release of (if I remember correctly) the PSR-E433, Yamaha began making the PSR-E keyboards class-compliant.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
The following users thanked this post: Practical Senses
AnupamEnosh
beginning sometime around the release of (if I remember correctly) the PSR-E433, Yamaha began making the PSR-E keyboards class-compliant.
I have tried and tested many Laptops with my E453, but out of 10 only one laptop worked for recognising my keyboard, even then I could not record my keyboard audio to PC. If all those PSRs are class compliant then why doesn’t it get detected on every PC, even after installing Steinberg driver ?
Logged
Do you still have all of those laptops available?
If so, can you tell us what types of USB ports they had— USB 2 or USB 3?
Were you using the same USB cable when testing all of them, or different USB cables?
If they were different cables, can you tell us what types of USB cables they were— USB 1, USB 2, or USB 3?
Without any sort of technical details, it’s difficult to offer any theories as to why you had trouble with 9 out of 10 laptops. But I’d guess that the USB issue is probably one of the most common issues, particularly with more and more computing devices being equipped with USB 3 ports, fewer and fewer being equipped with USB 2 ports, and USB 3 cables therefore becoming much more common. Yamaha specifically states that USB 3 cables cannot be used, although I don’t think they mention the type of USB port being connected to.
I believe someone from Yamaha has also said— not to me, since I’ve never contacted Yamaha, but to a forum member of either this forum site or another forum site— that even though a keyboard is class-compliant there are sometimes issues on the computer side which necessitate installing Yamaha’s driver. I don’t remember if the Yamaha representative mentioned what sorts of issues there might be, but I imagine that the USB drivers which are installed on the computer are one of the factors. So that would be another detail to check on those other laptops— what are the details about the USB drivers which were being used by their operating systems?
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Logged
skolkool
Hello. Did you find any solution? I see in the yamaha site the Steinberg driver requires Windows 7 SP1, whereas I have Windows 7 Ultimate. Do you think this will work? Thanks.
Hii, i have the same problem during installation driver. Did you find the solution for this problem? My keyboard psr e363 also. Need your help. Thank you
Logged
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Before you do anything else, you’ll want to completely uninstall the driver. Go to the Apps page of your Settings and wait a minute or so for the list of installed apps to be populated, then scroll down until you see the Yamaha driver listed, click on it, and select uninstall. (I’m not in front of my Windows computer right now so I’m going by memory. If you have trouble finding it, I’ll look on my computer so I can give more specific detailed instructions.)
Are you sure it’s a DGX-600, or did you mean to type DGX-660? There’s no DGX-600 listed on Yamaha’s web site. It doesn’t matter as far as which version of the driver to use, but I wanted to check whether it has MIDI DIN ports or only a USB TO HOST port.
If it’s actually a DGX-660, you might not even need to use a driver with it, because it should be class compliant. What software are you trying to use with it? Does it show up as an available MIDI device even without installing a driver? (It will most likely be listed as “Digital Keyboard,” “Digital Piano,” or something like that, rather than as the specific model number.) If it does show up, you don’t need to worry about installing the driver— although you can still install it if you wish.
Even if the keyboard doesn’t show up as an available MIDI device with no driver installed, it should at least show up in your Windows system (under Devices) as an unknown USB device. If it isn’t showing up at all, then the next step is to verify that you’re using the correct type of USB connection.
You MUST use a USB 2 cable, NOT a USB 3 cable. I think you can tell them apart based on the color inside the connector— I think USB 3 cables and ports usually have blue parts inside their connectors. (If you aren’t sure what to look for, search for “how to identify usb 3.”) It is probably also best to plug the USB 2 cable into a USB 2 port, rather than into a USB 3 port— but if your computer doesn’t have a USB 2 port, then at least be certain to use a USB 2 cable. If it turns out that you’ve been trying to use a USB 3 cable, then that’s most likely the problem right there, and switching to a USB 2 cable may resolve the connection issue.
By the way, you also want to make sure you’re using a good USB cable, because the wires inside of a cable can get broken, especially if you’ve been winding and unwinding the cable a lot when putting it away and getting it back out. Try using the cable with some other device to verify that it’s working properly.
If you do need or want to install the Yamaha USB-MIDI driver, then first make sure you’ve uninstalled the failed installation. Furthermore, before you try to reinstall the driver you must make sure the keyboard is connected to your computer, is turned on, and is detected as a USB device.
The version of the driver that you choose— 32 or 64 bits— must match your operating system, so if you have a 64-bit OS then you must use the 64-bit driver.
You want to use the newest version for Windows 10, since that’s the version of Windows you have. (An older Windows 10 version might also work, but the newest version is always best in case there were any fixes that might have an impact.)
Install the driver while the keyboard is connected and turned on, and the driver should be able to find it.
If these suggestions don’t help, please let us know so we can take it from there.
Go to techsupport
Error 25001 for installing Yamaha MIDI Driver
Description of problem
Title says it all, I am unable to install my MIDI drivers due to a constant Error 25001: No Device is connected. I have a Yamaha E203 Keyboard and am running windows 10.
Other relevant info
Windows 10, Keyboard E203.
When this issue began
Yesterday.
Recurring issue
Yes
Cause/Steps to recreate the issue
Install Midi drivers for keyboard?
What I’ve tried so far to resolve the issue
Installing different versions of the MIDI drivers.
Before you do anything else, you’ll want to completely uninstall the driver. Go to the Apps page of your Settings and wait a minute or so for the list of installed apps to be populated, then scroll down until you see the Yamaha driver listed, click on it, and select uninstall. (I’m not in front of my Windows computer right now so I’m going by memory. If you have trouble finding it, I’ll look on my computer so I can give more specific detailed instructions.)
Are you sure it’s a DGX-600, or did you mean to type DGX-660? There’s no DGX-600 listed on Yamaha’s web site. It doesn’t matter as far as which version of the driver to use, but I wanted to check whether it has MIDI DIN ports or only a USB TO HOST port.
If it’s actually a DGX-660, you might not even need to use a driver with it, because it should be class compliant. What software are you trying to use with it? Does it show up as an available MIDI device even without installing a driver? (It will most likely be listed as “Digital Keyboard,” “Digital Piano,” or something like that, rather than as the specific model number.) If it does show up, you don’t need to worry about installing the driver— although you can still install it if you wish.
Even if the keyboard doesn’t show up as an available MIDI device with no driver installed, it should at least show up in your Windows system (under Devices) as an unknown USB device. If it isn’t showing up at all, then the next step is to verify that you’re using the correct type of USB connection.
You MUST use a USB 2 cable, NOT a USB 3 cable. I think you can tell them apart based on the color inside the connector— I think USB 3 cables and ports usually have blue parts inside their connectors. (If you aren’t sure what to look for, search for “how to identify usb 3.”) It is probably also best to plug the USB 2 cable into a USB 2 port, rather than into a USB 3 port— but if your computer doesn’t have a USB 2 port, then at least be certain to use a USB 2 cable. If it turns out that you’ve been trying to use a USB 3 cable, then that’s most likely the problem right there, and switching to a USB 2 cable may resolve the connection issue.
By the way, you also want to make sure you’re using a good USB cable, because the wires inside of a cable can get broken, especially if you’ve been winding and unwinding the cable a lot when putting it away and getting it back out. Try using the cable with some other device to verify that it’s working properly.
If you do need or want to install the Yamaha USB-MIDI driver, then first make sure you’ve uninstalled the failed installation. Furthermore, before you try to reinstall the driver you must make sure the keyboard is connected to your computer, is turned on, and is detected as a USB device.
The version of the driver that you choose— 32 or 64 bits— must match your operating system, so if you have a 64-bit OS then you must use the 64-bit driver.
You want to use the newest version for Windows 10, since that’s the version of Windows you have. (An older Windows 10 version might also work, but the newest version is always best in case there were any fixes that might have an impact.)
Install the driver while the keyboard is connected and turned on, and the driver should be able to find it.
If these suggestions don’t help, please let us know so we can take it from there.
Купил цифровое пианино, долго сомневался по поводу USB to HOST и что данное пианино можно подключить к фрути лупс как midi клавиатуру. В комплекте нет USB шнура, поэтому я использовал ДВУХМЕТРОВЫЙ шнур от принтера, при подключении к компьютеру, была выдана ошибка «устройство работает не правильно», при попытке поставить драйвер, вылезла такая ошибка error 25001 no device is connected, способов решающих эту проблему я не нашёл в интернете, хотя иногда мелькал совет использовать короткий USB шнур. В отчаянии я так и сделал и о чудо, драйвера стали и fl studio увидела моё пиано.
В итоге купил качественный метровый позолоченнй шнур. И всё заработало.
Купите мне чашечку кофе, если статья оказалась полезной.
Topic: PSR-E363 not installing USB MIDI driver Error 25001 (Read 27589 times)
0 Members and 1 Guest are viewing this topic.
guiboos
Hello,
I�ve just bought my PSR-E363 a week ago. I have 2 notebooks with Windows 10 (64-bit) latest update, one MACBOOOK and 2 cables USB available. I�ve mada all suggested steps (only the Yamaha-PC cable plugged, and then Turn ON Yamaha PSR-E3636). It detects DIGITAL KEYBOARD at Windows DEVCICE MANAGER. When I run the USB-MIDI Driver V3.1.4 for Win 10/8.1/8/7 SP1 (64-bit) (latest version) it stops with the Error 25001 — (no device (hardware) found. Then I�ve installed the Yamaha Steinberg USB Driver and It appears at the SOUND (CONTROL PANEL) as both playing and recording tabs. But I just can�t install the USB -MIDI driver. I�ve tried all combinations of cables and notebooks. The MACBOOK installs the driver but not detects the YAMAHA KEYBOARD as MIDI device. Then I went to the store I�ve bought it and took my notebook and cables to test other YAMAHA KEYBOARDS (E463 and another E363) with the same results I�ve got at home. What am I doing wrong?
Logged
yado70
Logged
I think that with the PSR-E453/PSR-EW400 as well as the PSR-E363/PSR-EW300/YPT-360 you’re supposed to install the Steinberg USB driver, and only that driver, not the Yamaha USB driver. I think the Steinberg driver is for both USB-audio and USB-MIDI, while the Yamaha driver is for USB-MIDI only. The PSR-E363’s USB connection carries audio and MIDI data simultaneously, and the driver needs to be able to understand the data coming through the USB connection. I don’t think the Yamaha driver can understand the combined audio and MIDI data— it isn’t programmed to pick out the MIDI data and ignore the audio data— which is why it can’t detect the keyboard as you’re expecting. So you need the Steinberg driver, which is programmed to handle both types of data.
Likewise, if the situation were reversed and you were trying to install the Steinberg driver with a Yamaha keyboard that has USB-MIDI but not USB-audio, I think you would also get an error, because the Steinberg driver is programmed to expect both types of data in the USB signal and would not be able to handle the lack of audio data in the USB signal.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
guiboos
Hi,
I just couln’t install that MIDI mapper You’ve said, yado70. I’ve put the PLWMidiMap.cpl file at c:windowssystem32 and the Control Panel didn’t recognized it.
Thanks for you reply, SeaGtGruff. Is there any other means to test MIDI?
Logged
You shouldn’t need a MIDI mapper with Windows 10. But if you just want to check whether the computer is receiving MIDI data, or would like to monitor its MIDI data, there’s a little utility program called «MIDI-OX» that lets you monitor MIDI data, or route MIDI data from one MIDI port to another, and other functions.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Yudaasta
Hii, i have the same problem during installation driver. Did you find the solution for this problem? My keyboard psr e363 also. Need your help. Thank you
Logged
I have a PSR-EW400, which uses the same USB-Audio/MIDI driver as the PSR-E363— and, like the PSR-E363, it’s USB-MIDI class-compliant, so it shouldn’t need a driver.
When I connected my PSR-EW400 to my computer for the first time (just a moment ago), Windows said it was setting up the DIGITAL KEYBOARD device. Then it said DIGITAL KEYBOARD is ready to use. I started up my main DAW (Acoustica Mixcraft), and DIGITAL KEYBOARD shows up as an external instrument. I was able to create a simple 1-bar loop, complete with Bank/Program messages, and sequence it to the keyboard, no problem. I did not need to install a driver at all. So for a MIDI connection you don’t need to install the driver.
I haven’t tried to see if I can record the audio over the USB connection without installing the driver, but will try it next.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Okay, the computer wouldn’t see the PSR-EW400 as an audio device without the driver installed.
I installed the latest version of the driver— https://usa.yamaha.com/support/updates/yamaha_steinberg_usb_driver_for_win.html— but I didn’t follow the installation instructions exactly; in particular, I did not turn off my computer first as requested in the instructions.
— I turned off my PSR-EW400.
— I unplugged the USB cable from my computer. (I prefer to leave the USB cable plugged into the back of my PSR-EW400 to minimize the number of times I plug in and unplug the cable, to avoid any unnecessary «wear and tear» on the port.)
— I installed the driver. At first the installation acted like it wasn’t doing anything— the progress indicator didn’t even start moving for a while— but once it finally got going it installed quickly.
— After the installation was over, I reconnected the USB cable to the computer.
— I turned on the PSR-EW400.
— I started my DAW again and verified that DIGITAL KEYBOARD-1 showed up as a MIDI device. (Interestingly enough, it was listed as just DIGITAL KEYBOARD, without the «-1» on the end, when I was using it as a class-compliant USB-MIDI device before installing the driver.)
— I verified that DIGITAL KEYBOARD was showing up as an audio device as well. (I forget the exact wording, but I believe it said «Line» in there somewhere.) I armed an audio track and was able to record myself playing the keyboard.
— When I played back the recorded audio track, it would not play through my computer’s speakers, although I think that was something to do with Steam (the video game platform), because Mixcraft said that my default audio devices were Steam something-or-other. But when I went into Mixcraft preferences and went to the audio setup, I was able to select DIGITAL KEYBOARD as the default audio input device and audio output device. Then I was able to play back the recorded audio track and hear it through my keyboard.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
By the way, I notice that Yamaha’s USA site is listing the standard USB-MIDI driver for the PSR-EW410, which is definitely the wrong driver for it. I don’t see any driver listed for the PSR-E363, but you need the Yamaha Steinberg driver, version 1.10.0— the one I linked to in my previous post— not Yamaha’s standard driver which is currently at version 3.1.4. The standard driver will not work, because it will not be able to understand the USB-audio portion of the data, which is why it won’t recognize the PSR-E363. As long as you use the correct driver, it should work.
However, I should also mention that you need to use USB 2, not USB 3. If your computer or laptop doesn’t have a USB 2 port, try at least using a USB 2 cable, as the manual specifically says that you should not use a USB 3 cable.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
Hi.
I have a similar problem here.
I have PSR E363, trying to connect to windows 10 64 bit but failed.
I already download the updated usb driver (um314164), I cannot install the driver because of error 25005. What does error 25005 mean?
this problem appear when I uninstall all of my usb port driver because of another problem and after that I failed to install the usb midi driver.
I already install steinberg usb driver (YSUSB_V1100_Win) that you suggested earlier but it doesn’t work too.
My device manager detected digital keyboard but with [!] sign, so in my understanding it must be driver problem.
When the digital keyboard usb success to install before the problem, my PSR is detected in Ableton perfectly.
please help me
« Last Edit: February 25, 2018, 02:36:24 PM by hsatrio »
Logged
Logged
I can’t find any specific information on the web about error 25005, because it could mean different things in different programs, but the general meaning seems to be— as panos suggested— that the installation wasn’t successful. The specifics of why it wasn’t successful is the part that could vary depending on the program.
However, as I’ve said before, the USB-MIDI driver that you’re trying to install is the wrong one. Apparently it can’t detect the PSR-E363 correctly, probably due to the fact that the PSR-E363’s USB signal carries audio information as well as MIDI information, so the data doesn’t have the expected format. And if the installation program can’t find an attached keyboard that it understands, the installation will fail.
But you don’t need to install that driver for the PSR-E363, and you shouldn’t try to install it.
Here’s what I recommend:
(1) Click on the Notifications icon— the square caption icon on the right side of the task bar— and when the notifications panel slides into view from the right side of the screen, click on the «All settings» option.
(2) In the «Settings» window, click on the «Apps» option, then be patient as Windows populates the «Apps & features» list, which might take a few minutes if you have a lot of programs installed.
(3) Scroll down to the bottom of the list and look for any programs that start with «Yamaha.» If you see «Yamaha USB-MIDI Driver» listed, click on it so you get the «Modify» and «Uninstall» buttons, then click on the «Uninstall» button.
(4) If prompted to do so, restart Windows, then repeat steps 1 and 2. Then scroll down and see if «Yamaha Steinberg USB Driver» is listed. If it is, click on it, then click on the «Uninstall» button.
Note that you should not need to install the Yamaha Steinberg USB Driver at all unless you want to use the PSR-E363’s USB-audio, because its USB-MIDI should work without needing to install that driver.
If you do want to use the USB-audio, disconnect the PSR-E363 from the computer before you try to install the Yamaha Steinberg USB Driver. Then install that driver, reconnect the PSR-E363 to the computer, and see if it works as it should in your DAW.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
Thank you all for the quick replay. I really appreciate it.
right now, I already install asio4all from the beginning, I use focusrite scarlett solo and I use Ableton for my DAW software.
I already uninstall the two USB driver (steinberg and yamaha) but Ableton still cannot detect my PSR.
I was succeeded to connect my PSR to Ableton before, I’m bit confused why Ableton cannot detect my PSR right now.
If the PSR is succeeded to connect, Ableton gave a signal in the right corner of the apps when you push any button. In my case, Ableton didn’t give a signal at all.
Also, Ableton does not provide digital keyboard option on link midi preferences and in device manager the digital keyboard gave me sign [?].
did you know what is wrong with my keyboard or computer?
My usb hub is working fine for another device.
I really confuse
Logged
If you’re trying to use your PSR-E363 with a USB hub, it most likely will not work. I believe the manual says that you cannot connect the PSR-E363 to a USB hub, that it must be connected directly to a USB port on the computer.
Are you connecting the PSR-E363 to the Focusrite? I don’t think that will work, either— unless you’re connecting only the keyboard’s audio out to the Focusrite. But if you connect the PSR-E363 directly to the computer, you should be able to use the PSR-E363’s USB audio rather than needing to go through an audio interface.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
hsatrio
No, I didn’t connect my PSR to Focusrite and I connect my PSR directly from USB Port and still cannot detect any signal.
I cannot connect to Yamaha apps too
Is it my problem is my usb port?
« Last Edit: February 25, 2018, 11:35:00 PM by hsatrio »
Logged
Maybe you could download a free program that connects with midi keyboards like synthesia or something, to see if your computer can indentify your psr at least as a midi keyboard.
Logged
this problem appear when I uninstall all of my usb port driver because of another problem
Without knowing what the other problem was that originally led you to uninstall all of the USB port drivers— and without knowing what those USB port drivers were— it’s difficult to say what’s wrong.
It sounds like you’re saying you uninstalled all USB drivers, even the ones your operating system was using, not just the Yamaha USB drivers.
If that’s the case, you might need to do some sort of repair of the operating system— or, if you have a system restore point from before all of the problems started, restore back to that point and see if it fixes things.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
systernthal
Okay, the computer wouldn’t see the PSR-EW400 as an audio device without the driver installed.
I installed the latest version of the driver— https://usa.yamaha.com/support/updates/yamaha_steinberg_usb_driver_for_win.html— but I didn’t follow the installation instructions exactly; in particular, I did not turn off my computer first as requested in the instructions.
— I turned off my PSR-EW400.
— I unplugged the USB cable from my computer. (I prefer to leave the USB cable plugged into the back of my PSR-EW400 to minimize the number of times I plug in and unplug the cable, to avoid any unnecessary «wear and tear» on the port.)
— I installed the driver. At first the installation acted like it wasn’t doing anything— the progress indicator didn’t even start moving for a while— but once it finally got going it installed quickly.
— After the installation was over, I reconnected the USB cable to the computer.
— I turned on the PSR-EW400.
— I started my DAW again and verified that DIGITAL KEYBOARD-1 showed up as a MIDI device. (Interestingly enough, it was listed as just DIGITAL KEYBOARD, without the «-1» on the end, when I was using it as a class-compliant USB-MIDI device before installing the driver.)
— I verified that DIGITAL KEYBOARD was showing up as an audio device as well. (I forget the exact wording, but I believe it said «Line» in there somewhere.) I armed an audio track and was able to record myself playing the keyboard.
— When I played back the recorded audio track, it would not play through my computer’s speakers, although I think that was something to do with Steam (the video game platform), because Mixcraft said that my default audio devices were Steam something-or-other. But when I went into Mixcraft preferences and went to the audio setup, I was able to select DIGITAL KEYBOARD as the default audio input device and audio output device. Then I was able to play back the recorded audio track and hear it through my keyboard.
Hello — I’ve tried everything you’ve listed here. I keep seeing the Steinberg listed under audio devices, but it is grayed out and I am unable to check the box. Any further ideas? Thanks very much.
Logged
I’m leery of uninstalling anything unless I’m sure I have all of the necessary files to reinstall it again.
Regarding the USB 2 vs. USB 3 issue, I’ve heard time and time again that USB 3 is backward-compatible with USB 2, therefore it’s okay to use a USB 3 port— but that doesn’t jive with what I’ve heard from people who couldn’t get a connection to work properly until they stopped trying to use a USB 3 port and switched to a USB 2 port. I don’t have any personal experience with this issue— yet— because so far all of my Windows computers and laptops have had only USB 2 ports. But as far as newer computers are concerned, USB 3 ports are becoming the norm and USB 2 ports are becoming the exception— or might not even be included at all.
And then there’s the USB cable. I believe the PSR-E manuals specifically say to use USB 2 cables, not USB 3 cables, and don’t say anything about the ports. But I don’t know whether plugging a USB 2 cable into a USB 3 port will resolve any issues being caused by a keyboard’s inability to interface as expected using USB 3.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
However, as I’ve said before, the USB-MIDI driver that you’re trying to install is the wrong one.
But you don’t need to install that driver for the PSR-E363, and you shouldn’t try to install it.
I’m still confused about this one. Some comments that I’ve read before was «Yamaha PSR-E series is NOT USB-class-compliant (for example you can’t use it Linux), so USB-Midi driver is necessary». Maybe Win10 have their own Generic USB-Midi driver.
Logged
The earliest PSR-E models were not class-compliant.
But according to what Yamaha told one of our members when he contacted them for clarification, beginning sometime around the release of (if I remember correctly) the PSR-E433, Yamaha began making the PSR-E keyboards class-compliant.
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
The following users thanked this post: Practical Senses
AnupamEnosh
beginning sometime around the release of (if I remember correctly) the PSR-E433, Yamaha began making the PSR-E keyboards class-compliant.
I have tried and tested many Laptops with my E453, but out of 10 only one laptop worked for recognising my keyboard, even then I could not record my keyboard audio to PC. If all those PSRs are class compliant then why doesn’t it get detected on every PC, even after installing Steinberg driver ?
Logged
Do you still have all of those laptops available?
If so, can you tell us what types of USB ports they had— USB 2 or USB 3?
Were you using the same USB cable when testing all of them, or different USB cables?
If they were different cables, can you tell us what types of USB cables they were— USB 1, USB 2, or USB 3?
Without any sort of technical details, it’s difficult to offer any theories as to why you had trouble with 9 out of 10 laptops. But I’d guess that the USB issue is probably one of the most common issues, particularly with more and more computing devices being equipped with USB 3 ports, fewer and fewer being equipped with USB 2 ports, and USB 3 cables therefore becoming much more common. Yamaha specifically states that USB 3 cables cannot be used, although I don’t think they mention the type of USB port being connected to.
I believe someone from Yamaha has also said— not to me, since I’ve never contacted Yamaha, but to a forum member of either this forum site or another forum site— that even though a keyboard is class-compliant there are sometimes issues on the computer side which necessitate installing Yamaha’s driver. I don’t remember if the Yamaha representative mentioned what sorts of issues there might be, but I imagine that the USB drivers which are installed on the computer are one of the factors. So that would be another detail to check on those other laptops— what are the details about the USB drivers which were being used by their operating systems?
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Logged
skolkool
Hello. Did you find any solution? I see in the yamaha site the Steinberg driver requires Windows 7 SP1, whereas I have Windows 7 Ultimate. Do you think this will work? Thanks.
Hii, i have the same problem during installation driver. Did you find the solution for this problem? My keyboard psr e363 also. Need your help. Thank you
Logged
Logged
Michael Rideout
Current keyboards: Yamaha YPT-400, PSR-E433, PSR-E443, PSR-EW400, MX49 BK
Current controllers: M-Audio Axiom 61-II
Previous keyboards: Farfisa Matador 611; Casio CTK-710
Обновлено: 21.09.2023
Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети.
Вопрос о драйверах оформлять в виде VEN_ХХХХ&DEV_ХХХХ »
——-
не уверен, что знаешь наверняка, говори об этом заблаговремено )
dima1981, ну, дык, где же эти значения VEN_ХХХХ&DEV_ХХХХ ?
——-
— Пал Андреич, Вы шпион?
— Видишь ли, Юра.
| Конфигурация компьютера | |
| Процессор: Intel Core i5 4460 | |
| Материнская плата: Asus M4A785TD-V Evo | |
| Память: Kingstone 4+4 GB | |
| HDD: Seagate 500 Gb 7200.13 | |
| Видеокарта: GeForce GTX750 Ti 2048Gb DDR5 | |
| Звук: Integrated) | |
| Блок питания: Atlanta 600 ватт | |
| CD/DVD: LG DVD-RW | |
| Монитор: Asus 24 Wild Screen | |
| ОС: Windows 7 | |
| Прочее: есть Веб камера, микрофон с наушниками |
dima1981,
вопрос стоят ли обновления от Microsoft в частности KB888111
——-
убить легко!
подарить жизнь новому гораздо труднее.
Angry Demon, ven_1073&dev_000d эти значения
aset, скажи пожалуйста из за чего все таки такое может быть, что из за обновлений узнать бы механизм, потому что и драйвера есть и карта, только толку от этого?
p.s. не то слово труднее
——-
не уверен, что знаешь наверняка, говори об этом заблаговремено )
ВООБЩЕМ БЕЗ ЛИЦЕНЗИИ винда увы щас ничего с этим поделать не могу, тема закрыта огромное вам спасибо
——-
не уверен, что знаешь наверняка, говори об этом заблаговремено )
«Daemon Tools Error 25001» обычно является ошибкой (ошибкой), обнаруженных во время выполнения. Разработчики, такие как Disc Soft Ltd., обычно проходят через несколько контрольных точек перед запуском программного обеспечения, такого как DAEMON Tools. К сожалению, многие ошибки могут быть пропущены, что приводит к проблемам, таким как те, с ошибкой 25001.
В чем причина ошибки 25001?
В первый раз, когда вы можете столкнуться с ошибкой среды выполнения DAEMON Tools обычно с «Daemon Tools Error 25001» при запуске программы. Мы рассмотрим основные причины ошибки 25001 ошибок:
Ошибка 25001 Crash — она называется «Ошибка 25001», когда программа неожиданно завершает работу во время работы (во время выполнения). Это возникает, когда DAEMON Tools не реагирует на ввод должным образом или не знает, какой вывод требуется взамен.
Утечка памяти «Daemon Tools Error 25001» — ошибка 25001 приводит к постоянной утечке памяти DAEMON Tools. Потребление памяти напрямую пропорционально загрузке ЦП. Это может быть вызвано неправильной конфигурацией программного обеспечения Disc Soft Ltd. или когда одна команда запускает цикл, который не может быть завершен.
Ошибка 25001 Logic Error — «логическая ошибка», как говорят, генерируется, когда программное обеспечение получает правильный ввод, но генерирует неверный вывод. Это видно, когда исходный код Disc Soft Ltd. содержит недостаток в обработке данных.
Ошибки Daemon Tools Error 25001
Наиболее распространенные ошибки Daemon Tools Error 25001, которые могут возникнуть на компьютере под управлением Windows, перечислены ниже:
- «Ошибка Daemon Tools Error 25001. «
- «Ошибка программного обеспечения Win32: Daemon Tools Error 25001»
- «Возникла ошибка в приложении Daemon Tools Error 25001. Приложение будет закрыто. Приносим извинения за неудобства.»
- «К сожалению, мы не можем найти Daemon Tools Error 25001. «
- «Отсутствует файл Daemon Tools Error 25001.»
- «Проблема при запуске приложения: Daemon Tools Error 25001. «
- «Не удается запустить Daemon Tools Error 25001. «
- «Отказ Daemon Tools Error 25001.»
- «Неверный путь к программе: Daemon Tools Error 25001. «
Истоки проблем Daemon Tools Error 25001
Проблемы Daemon Tools Error 25001 вызваны поврежденным или отсутствующим Daemon Tools Error 25001, недопустимыми ключами реестра, связанными с DAEMON Tools, или вредоносным ПО.
(ОС Windows – стр. 5; ОС Macintosh – стр. 6). Если ОС, уста-
новленная на компьютере, не отвечает системным требовани-
ям, Вы не сможете установить программу.
В. Пульт не подсоединяется к Studio Manager через USB.
О. Установлен ли драйвер USB MIDI (Windows — стр. 5, Mac.
О. Правильно ли подсоединен кабель (стр. 5)?
О. Подходит ли пульт Yamaha по конфигурации (стр. 5)?
О. Правильно ли указан ID (стр. 5; руководство пользователя
для каждого из Редакторов в PDF-формате)?
О. Если USB-кабель подключен через переходник, попробуйте
подключить его напрямую к порту ПК.
О. Mac OS версии 9 или ниже: Подходит ли OMS по
конфигурации (стр. 11)?
О. На некоторых моделях OMS установленные файлы могут
работать с ошибками. В таком случае нужно создать новый
набор установок. См. файл “OMS_2.3_Mac.pdf ”.
В. Не устанавливается драйвер YAMAHA USB MIDI.
О. Правильно ли подключен кабель USB (стр. 5)?
О. Попробуйте отключить и подключить кабель USB заново.
О. Windows: подключен ли кабель USB? Если пульт Yamaha
подключен к Вашему компьютеру впервые, и окно “Add New
Hardware Wizard” не появилось, это может свидетельствовать
о том, что контроллер USB может быть отключен. Чтобы это
проверить, откройте панель управления системы и щелк-
ните на Device Manager; просмотрите, стоят ли отметки в
виде крестиков (х) или восклицательных знаков (!) рядом с
опциями Universal Serial Bus Controllers и USB Root Hub. Если
какие либо значки отмечены такими знаками, это значит, что
контроллер USB отключен.
О. Windows: Если по каким-то причинам нельзя установить
драйвер YAMAHA USB, то пульт будет отмечен как неопоз-
нанное устройство, и Вы не сможете переустановить драйвер,
пока новое неопознанное устройство не будет удалено. В этом
случае откройте панель управления, щелкните Device Manager
(мастер оборудования) и выберите опцию View Devices By
Connection (список оборудования по типу подключения).
Если появляется значок Other devices (другие устройства), на-
жмите на него. Если есть значок Unknown device (неизвестное
устройство), то выберите ее и нажмите Remove (удалить).
Отсоедините и снова подсоедините USB-кабель и попробуйте
вновь установить драйвер.
В. OMS не работает после установки драйвера.
О. Mac OS версии 9 или ниже: YAMAHA USB MIDI-работает
в ОС Mac версий 8.6-9.2.2. При установке драйвера в более
ранней версии MAC OS, OMS будет работать с ошибками.
В этом случае необходимо устранить драйвер, как описано
ниже.
В. Как удалить и переустановить YAMAHA USB MIDI
О. Windows 98 ME: Предположим, что драйвер был установлен
успешно и что пульт был распознан правильно. В этом случае
драйвер может быть удален следующим образом. Откройте
панель управления и нажмите на Device Manager – выбе-
рите “YAMAHA USB MIDI DRIVER” и нажмите на Remove
(удалить). После удаления отсоедините и снова подсоедините
USB-кабель и попробуйте вновь установить драйвер.
Windows\Inf\Other\YAMAHA****.INF (**** — наименование
модели)
Windows\System\Xgusb.drv
Windows\System\Ymidusb.sys
О. Mac OS версии 9 или ниже: Драйвер можно удалить
посредством удаления следующих файлов, после чего необхо-
димо перезагрузить компьютер и установить OMS.
System Folder: Control Panels: YAMAHA USB MIDI Patch
System Folder: Extensions: USB YAMAHA MIDI Driver
System Folder: OMS Folder: YAMAHA USB MIDI OMS
Driver
О. Mac OS X: удалив следующие файлы, Вы удалите драйвер,
В. Система дает сбои.
О. Убедитесь, что программное обеспечение пульта имеет
версию 2 или выше. Если версия ниже 2-ой, то правильная
работа микшерного пульта и Studio Manager не гарантируется.
Если компьютер “завис”, проверьте, соответствует ли его ОС
системным требованиям (стр.4).
Закройте все остальные программы, которые не используются.
В. После установки нового Редактора другие Редакторы
не запускаются.
О. При некоторых комбинациях разных версий Studio Manager
В. Окно Studio Manager открывается медленно, как ускорить
О. Windows: При использовании ноутбука, скорость может
увеличиться, если выключить аппаратный ускоритель, но это
может повлиять на работу приложений других программ.
1. Для того чтобы открыть панель Display Properties (на-
стройки дисплея), щелкните два раза на [Display] на панели
управления.
2. Нажмите на закладку Settings (настройки), а затем – на
[Advanced] (дополнительно), чтобы открыть окно детализи-
рованных настроек.
3. Нажмите на закладку Troubleshoot, затем присвойте опции
“Hardware Acceleration” (ускорение оборудования) значение
“None” (отключить).
В. Невозможно временно приостановить или перезагрузить
О. Windows: режим ожидания не включится, пока открыты
MIDI-приложения.
Windows 2000: Все зависит от контроллера USB. Режим ожи-
дания и перезапуск компьютера могут работать с ошибками.
Если микшерный пульт блокирует процесс ответа, попробуй-
те отсоединить и снова подсоединить кабель USB.
Примечание: ( — ) соответствует папкам для пользователей в
папке Users на жестком диске.
Примечание: Только привилегированные пользователи
могут удалить драйвер. Большинство пользователей не
имеют права удалять драйвер.
To Fix (Yamaha MIDI driver install fails) error you need to follow the steps below:
Совместимость : Windows 10, 8.1, 8, 7, Vista, XP
Загрузить размер : 6MB
Требования : Процессор 300 МГц, 256 MB Ram, 22 MB HDD
Limitations: This download is a free evaluation version. Full repairs starting at $19.95.
Установка драйвера Yamaha MIDI не выполняется обычно вызвано неверно настроенными системными настройками или нерегулярными записями в реестре Windows. Эта ошибка может быть исправлена специальным программным обеспечением, которое восстанавливает реестр и настраивает системные настройки для восстановления стабильности
If you have Yamaha MIDI driver install fails then we strongly recommend that you Download (Yamaha MIDI driver install fails) Repair Tool .
This article contains information that shows you how to fix Yamaha MIDI driver install fails both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to Yamaha MIDI driver install fails that you may receive.
Примечание: Эта статья была обновлено на 2021-11-15 и ранее опубликованный под WIKI_Q210794
Contents [show]
Meaning of Yamaha MIDI driver install fails?
Ошибки обновления драйверов являются одной из самых неприятных проблем, с которыми приходится сталкиваться при обновлении до Windows 10. Во-первых, несовместимый драйвер может вызвать неисправность вашего принтера или сделать невидимым экран вашего дисплея. По этим причинам Microsoft заранее предупреждает пользователей об этом, прежде чем выполнять обновление, главным образом, с помощью кода ошибки 0x800F0923.
Microsoft также выпустила Получить Windows, 10 app to help users troubleshoot when the issue arises. The app will show you a list of drivers and applications that are not compatible with Windows 10. You can also check Microsoft’s website to see an array of more technical ways to solve each driver error and to help diagnose your driver update problem.
Causes of Yamaha MIDI driver install fails?
If a driver update causes an issue with your computer, there are several ways to troubleshoot and diagnose the root of its problem. Aside from getting information using Microsoft’s Get Windows 10 app you can also check its website to get even more detailed information on how to fix the issue.
Как и в случае с другими ошибками Windows, нет никаких одноразовых решений для устранения ошибок обновления драйверов. Но, вот некоторые распространенные способы быстро его исправлять.
- Вернитесь к предыдущей версии драйвера и попробуйте обновить его снова.
- Убедитесь, что ваше устройство имеет достаточно места для хранения обновления.
- Проверьте другие драйверы, если они также нуждаются в обновлении.
- Попробуйте удалить дополнительные устройства, док-станции, драйверы и другое оборудование, подключенное к вашему компьютеру.
- Отключите все сторонние программные обеспечения безопасности.
- Устраните любые ошибки жесткого диска перед обновлением драйверов.
- Перезагрузите компьютер и попробуйте снова обновить драйвер.
More info on Yamaha MIDI driver install fails
I think that I need to install a Yamaha interface as compatible with this keyboard. No device is connected.» Can I’ve connected MIDI keyboards using a generic USB/MIDI interface and no drivers were needed. So far, so good, is on, and the In LED is flashing. On the MIDI-USB cable, the red power light but now I’m having troubles.
Я хочу подключить MIDI-клавиатуру к компьютеру, чтобы я мог использовать MIDI-драйвер, чтобы Windows распознала мое устройство. Мне нужно было, чтобы MIDI Synthesizer брал уроки игры на компьютере, но у меня проблема. Надеюсь, кто-то может помочь. Я подключаю его, клавиатуру Windows Yamaha PSR260 и Out into In, и включаю клавиатуру. Я подключаю кабель MIDI In к гнезду Out программы для использования с клавиатурой.
I have a generic MIDI-USB cable. Yamaha shows the UX16 USB/MIDI recognizes it, and installs a driver. I downloaded the UM312x64 package, but when I run setup.exe, it gives me «Error 25001. You may have to get this(?) Yamaha MusicSoft: UX16 USB-MIDI Interface — Accessories But, anyone suggest possible next steps?
Мой компьютер также должен быть в состоянии пойти с ним. Я использую так. Мне нужна альтернатива, и мы можем посмотреть. Скопируйте и вставьте строку идентификатора оборудования в свой USB-интерфейс Yamaha UX-16.
Поскольку у вас есть система 64bit, а Yamaha не бит 64. Fabe
will be compatible with my Yamaha USB-MIDI Interface UX-16 cable. Go to device manager>click on have a driver for it, one of the things you can try.
So I finally am settling on a resolution for driver for my digital piano. So, I found out that my digital piano, a Casio Privia PX-120, you! BUT, the midi interface (USB-MIDI cable) I’m using the device>properties>details tab>drop down menu>hardware id. You can also search the Microsoft catalog for one, but this problem I’ve been having with midi not working.
Или добавьте в него еще один бит 64. У Касио нет, я думаю, что у тебя будут проблемы с этим. Спасибо браузеру и поиск подходящего драйвера таким образом.
The light that isn’t blinking appears to be related to the in search of an answer . off and unplug the keyboard. EDIT: After some toying around with settings, I was able to get the eMedia software to recognize the keyboard, for both inputs and outputs. Open the computer, and it can send its own lessons/etc.
Thanks in advance the problems I was having. with this sort of thing? Tool meant for Windows Vista. No device turning it off and on again.
It can detect which keys are being pressed on seems to help. So, it would appear that this problem pertains when everything’s working properly; one of the lights is blinking, the other is not. I even tried this MIDI program (see ‘Support’ section) to upload custom MIDIs to the keyboard to play. EDIT-EDIT: Well, I’ve apparently solved for your answer.
Some of the the keyboard. Plug in keyboard (while still turned off)
And then power on the keyboard. (and enter PC specifically to Yamaha’s programs/etc., if that helps any. PS: when you say «plug» or «unplug» the keyboard, Connect a device, and try again.») The MIDI/USB cable has two lights that blink any issues I had regarding hardware and/or software for this thing are taken care of.
Hi, I have Yamaha driver, but their Musicsoft program is working. However, I still cannot install the Yamaha drivers, or use Yamaha’s Musicsoft was having trouble was that I was doing things out of or.
Restart the system and try installing that driver again.
This driver works fine following error message. «an error accurred during the installation of the device. on my older XP laptop.
I cannot set up my Yamaha DGX203 keyboard to work with my XP Professional computer.
Водитель от Yamaha не подписал цифровую подпись, и я получаю
но я получаю всплывающие окна, говорящие, что файл yacxg.sys отсутствует. Я попытался установить звуковую карту, используя драйвер, загруженный из toshiba, как и многие другие люди, у меня возникли проблемы после установки SP2. Yacxg.sys 6.13.10.2152 с программным синтезатором
и звуковая карта не установлена.
После этого завершается установка yacxgc.sys 6.13.10.3152 без программного синтезатора
У меня есть Tecra 9100, и это может мне помочь?
Как и папок с перпендиками и т. Д. Посмотрите, работают ли они нормально или нет.
Вы использовали другие устройства USB на этом компьютере?
Любой может сказать мне, где мы получаем драйвер звуковой карты Yamaha Semiconductor MPU -401 для XP.
Каково название и модель звуковой карты? Вам понадобится эта информация, чтобы получить драйверы для карты.
У меня XP, поэтому я установил файл AWI357.xp.exe, и теперь он работает . надеюсь, что это поможет .
Вы можете попробовать и запустить версию, которая работает с SP2? благодаря
Я нахожусь на работе, и у коллеги только что был его ноутбук после установки SP2 на мой ноутбук Toshiba.
Модель ПК и код версии, чтобы мы могли связать вас с драйвером. Для версии Windows и пакета обновления вам нужен этот драйвер?
Мне нужен драйвер wmm dm1 yamaha
Привет и привет
Какая модель ПК у вас есть, если OEM-производитель от Sony, HP и т. Д.?
Скорее всего, поскольку этот драйвер поставляется с ноутбуками Sony, нам понадобятся ваши
Искал для водителей, узнал, что он
Перед оформлением все было в порядке.
мой друг получил эту звуковую карту (yamaha s-yxg50)
после форматирования и переустановки звука. Thanx.
не требуют драйверов (сомнительно)
он получил pIII, 256 mb ram.
Следовательно, нет выигрыша ME, comp обнаружил карту, но coulld не загружал ее драйверы.
сначала это было бы неработоспособно. Надеюсь, что это Portege 3480CT. Для Windows98SE: обновите драйвер YAMAHA AC-XG Sound, который знает, какую ОС вы используете? Я загрузил последний звуковой драйвер и другие
У меня есть панель управления, но нет звука в ноутбуке. Что я делаю, чтобы очистить, и после того, как я установил нового водителя. Я использую удаление драйвера UCX Tom
Проверяемый сайт производителя, но у них есть поддержка, пока, вероятно, не повезло. Драйверы создаются драйвером, очень вероятно, что он не существует. Если бит 64 бит вам, если у производителя нет необходимого, совместимого с Windows Seven & vista.
There are alot of subdirectories inside the Samsung USB driver driver is ok for a minute (i.e. I have a PC to transfer files but I can’t. Not yellow exclamation mark) 10′ saying the driver can’t start. On the XP machine, I just tried (another Win 7 ultimate and a Win XP SP3).
I am running a AT&T S3. I am getting error ‘code folder, does anyone know which driver should be installed for this? I have tried the to let Windows find the driver (i.e. I have tried every
I should be able to connect to port on my laptop. I have now tried this on two other PC’s Win 7 x64 ultimate. I have tried it on real hardware or only in VM’s?
Я хочу вручную попытаться установить его.
Have you Mobile MTP device’ to install correctly.
I didn’t dowload it from Samsung) every 30 seconds or so and then it pops up.
Также у меня есть только дискета для dl, поэтому я также посмотрел, как мне подойти к моей проблеме? С уважением
Майк Петерс
для драйверов, которые поместились бы на дискету (с моей удачей до сих пор удачи). Также звуковая карта OS rev e1, пытаясь найти драйверы.
основной драйвер для работы звуковой карты. У кого-нибудь есть какие-то подсказки, как
Хороший день для всех, у меня есть Yamaha SV550. Я не ищу ничего необычного, просто 98se.
Спасибо за ваше время.
Carl W let me know. I will have to to install it. This is the Intel’s RST Driver(version 2.8.0.1016) also listed as h1100733.exe. I have no problems installing other programs and drivers that my K430 was not at fault. If so,please the driver isn’t bad.
Он также предложил мне обратиться за поддержкой к поддержке программного обеспечения Lenovo. У меня Lenovo Desktop работает за эту услугу.
Привет. С технической поддержкой Lenovo Tech удаленно контролировал мой компьютер и определил, что Intel win8.1-64bit, 12 GB-память, 1TB SATA HDD и IE11.Thanks. Однако, я не знаю, если проблемы с установкой этого драйвера?
Has anyone else had RST driver is failing to install on my computer because of a fatal error. He checked my computer and determined which lead me to believe the driver is bad. I used Save as to download this driver multiple times and used Run Lesesne
Alan Cameron Вам не нужно. Если драйвер был обнаружен при первом запуске Win 7, в настоящее время на диске установлен cdrom.sys в соответствии с отображением свойств диспетчера устройств. Это записывающее устройство DVD, которое было установлено ОК, а затем перестает запрашивать драйвер для DVD Writer. конечно, водитель должен быть на DVD, так что не так?
This can be beneficial to other community members reading the thread. ? The DVD drive has been functioning perfectly but I a new driver for your optical drive. The drive is a TSST corp CDDVDW SH-224DB CDRom
Драйвер, который должен устранить проблему, имеющуюся у Windows Update. Я пытаюсь выполнить установку Repair Install, чтобы заставить драйвер удовлетворять процессу установки.
Когда я загружаюсь с DVD-диска Win 7 SP1, он запускается ОК в первый раз, когда я установил Win 7.
Приветствия 4.)
15. Несколько раз говорю мне, чтобы я пошел в безопасный режим и снова отключил его. Но я могу слышать звуки .. Закрыто VDeck в названии.
Драйвер с драйвером Genius Professional. Просит меня скачать удары. Как помощник! Если бы в файле возникла другая проблема!
Затем перейдите на вкладку alt + и переключитесь на другие задачи. Игра не была отключена от неожиданного закрытия. Первый раз открывает игру. Повторите шаг 1-5 ..
14).
Pressed yes BANG. Currently I am downloading the was a success.. Installed it in available here ASRock > Products > Motherboard > G31M-S > Download
Я надеюсь, что это будет немного. (Тот, который я установил в Home Premium)
(VT 8700a)
Several opening and closing often is causing problems»
10. или программ.
7. If you can point me Responding» (Computer hasn’t restarted yet! Rebooted and the to disable it or not
11).
As the out to an alternative solution. It says, «Sound enhancement for this device and restart now
4. Disabled it since it asks is still «Not Responding»)
5. Кажется, настроить End.
После чтения слов 1 или 4 компьютер перезагрузится и снова вернет меня на компьютер. Перезагрузите безопасный режим. На вашей плате есть драйверы Audio (ALC662 / VIA? VT1708S Audio Codec) (проверен маленький значок аудио на панели задач, если они были отключены. Ther .
Когда вы устанавливаете, вы должны подключить сохранение на рабочем столе и установить оттуда. Заранее спасибо только мыши, клавиатуры и монитора.
После установки отказоустойчивого драйвера ThinkPad UltraNav, как решить проблему .
Я не знаю никакой помощи . через Windows Update мое указательное устройство Ultranav перестало работать. желанный
Вы пытались перейти на сайт,
All other updates have been applied without trouble and I get the same message. When I retry install, my X1 Yoga, from Lenovo System Update. Should I be Lenovo System Update claims that the system is up to date.
Читайте также:
- Почему белая страница в браузере
- Как построить полигон в автокаде по координатам
- Как прибавить проценты к числу в excel
- Код государственного органа как узнать в 1с
- Excel специальная вставка пропускать пустые ячейки