Ошибка 2110 access

Анализ «Microsoft Office Access can’t move the focus to the control |»

Это наиболее распространенное условие «Microsoft Office Access can’t move the focus to the control |», известное как ошибка времени выполнения (ошибка). Разработчики программного обеспечения пытаются обеспечить, чтобы программное обеспечение было свободным от этих сбоев, пока оно не будет публично выпущено. К сожалению, такие проблемы, как ошибка 2110, могут не быть исправлены на этом заключительном этапе.

Ошибка 2110 может столкнуться с пользователями Microsoft Access, если они регулярно используют программу, также рассматривается как «Microsoft Office Access can’t move the focus to the control |.@* The control may be a type that can’t receive the focus, such as a label.* The control’s Visible property may be set to No.* The control’s Enabled property may be set to No.@@1@1@3016@1.». Когда это происходит, конечные пользователи могут сообщить Microsoft Corporation о наличии ошибок «Microsoft Office Access can’t move the focus to the control |». Microsoft Corporation может устранить обнаруженные проблемы, а затем загрузить измененный файл исходного кода, позволяя пользователям обновлять свою версию. Если есть запрос на обновление Microsoft Access, это обычно обходной путь для устранения проблем, таких как ошибка 2110 и другие ошибки.

Что генерирует ошибку времени выполнения 2110?

Сбой во время запуска Microsoft Access или во время выполнения, как правило, когда вы столкнетесь с «Microsoft Office Access can’t move the focus to the control |». Это три основных триггера для ошибок во время выполнения, таких как ошибка 2110:

Ошибка 2110 Crash — это очень популярная ошибка выполнения ошибки 2110, которая приводит к завершению работы всей программы. Когда Microsoft Access не может обеспечить достаточный вывод для данного ввода или действительно не знает, что выводить, он часто путает систему таким образом.

Утечка памяти «Microsoft Office Access can’t move the focus to the control |» — ошибка 2110 утечка памяти приводит к тому, что Microsoft Access использует все больше памяти, что делает ваш компьютер запуск медленнее и замедляет вывод системы. Возможные провокации включают отсутствие девыделения памяти и ссылку на плохой код, такой как бесконечные циклы.

Ошибка 2110 Logic Error — логическая ошибка возникает, когда Microsoft Access производит неправильный вывод из правильного ввода. Когда точность исходного кода Microsoft Corporation низкая, он обычно становится источником ошибок.

Как правило, такие Microsoft Corporation ошибки возникают из-за повреждённых или отсутствующих файлов Microsoft Office Access can’t move the focus to the control |, а иногда — в результате заражения вредоносным ПО в настоящем или прошлом, что оказало влияние на Microsoft Access. Как правило, решить проблему можно заменой файла Microsoft Corporation. Кроме того, регулярная очистка и оптимизация реестра Windows предотвратит создание неправильных ссылок на пути к файлам Microsoft Corporation, поэтому мы настоятельно рекомендуем регулярно выполнять сканирование реестра.

Классические проблемы Microsoft Office Access can’t move the focus to the control |

Частичный список ошибок Microsoft Office Access can’t move the focus to the control | Microsoft Access:

• «Ошибка Microsoft Office Access can’t move the focus to the control |. «
• «Недопустимый файл Microsoft Office Access can’t move the focus to the control |. «
• «Возникла ошибка в приложении Microsoft Office Access can’t move the focus to the control |. Приложение будет закрыто. Приносим извинения за неудобства.»
• «Файл Microsoft Office Access can’t move the focus to the control | не найден.»
• «Microsoft Office Access can’t move the focus to the control | не найден.»
• «Ошибка запуска программы: Microsoft Office Access can’t move the focus to the control |.»
• «Не удается запустить Microsoft Office Access can’t move the focus to the control |. «
• «Отказ Microsoft Office Access can’t move the focus to the control |.»
• «Ошибка пути программного обеспечения: Microsoft Office Access can’t move the focus to the control |. «

Эти сообщения об ошибках Microsoft Corporation могут появляться во время установки программы, в то время как программа, связанная с Microsoft Office Access can’t move the focus to the control | (например, Microsoft Access) работает, во время запуска или завершения работы Windows, или даже во время установки операционной системы Windows. Документирование проблем Microsoft Office Access can’t move the focus to the control | в Microsoft Access является ключевым для определения причины проблем с электронной Windows и сообщения о них в Microsoft Corporation.

Причины проблем Microsoft Office Access can’t move the focus to the control |

Проблемы Microsoft Access и Microsoft Office Access can’t move the focus to the control | возникают из отсутствующих или поврежденных файлов, недействительных записей реестра Windows и вредоносных инфекций.

Особенно ошибки Microsoft Office Access can’t move the focus to the control | проистекают из:

• Недопустимые разделы реестра Microsoft Office Access can’t move the focus to the control |/повреждены.
• Вирус или вредоносное ПО, повреждающее Microsoft Office Access can’t move the focus to the control |.
• Microsoft Office Access can’t move the focus to the control | злонамеренно удален (или ошибочно) другим изгоем или действительной программой.
• Другая программа, конфликтующая с Microsoft Office Access can’t move the focus to the control | или другой общей ссылкой Microsoft Access.
• Поврежденная загрузка или неполная установка программного обеспечения Microsoft Access.

Продукт Solvusoft

Загрузка
WinThruster 2023 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление

It is not surprising to encounter run-time errors while handling your Access database. But recently several users have reported the strange error “Microsoft Access can’t move the focus to the control (Error 2110)”. Thus, if you are one such user who is facing the same problem, you must check out this post.

Here, you will find different workable solutions to fix Access error code 2110 with less effort.

Table of Content:

What Does Run-Time Error 2110: Access Can’t Move the Focus to the Control Mean?

How To Solve Microsoft Access Can’t Move the Focus to The Control (Error 2110)?

• Close Conflicting Programs
• Run the VBA Code
• Reinstall the Runtime Libraries
• Reinstall Graphics Driver
• Free Up Disk Space
• Use the Best & Reliable Tool to Repair & Recover Corrupt Access Database

What Does Run-Time Error 2110: Access Can’t Move the Focus to the Control Mean?

When this run-time error 2110 VBA occurs, it simply means that you can’t perform a single task to your Access database as it causes the entire program to shut down.

Error Detail:

Screenshot Of the Error:

Although, this error is generally triggered by incompatible or conflicting programs running simultaneously. But sometimes, it can also take place due to a bad graphics driver, memory problem, or virus infection.

Regardless of the reasons behind the occurrence of Microsoft Access runtime error 2110, it can be easily fixed by applying some effective ways mentioned below.

Way 1- Close Conflicting Programs

As already mentioned above, incompatible or conflicting programs running simultaneously can lead to this problem.

Therefore, consider stopping the conflict programs running in the background of your desktop.

To do this, follow the below steps:

• First, click on Ctrl + Alt + Delkeys together on your Windows desktop.
• Then, click on the Task Manager.
• Here, you’ll get the list of the currently running programs in your desktop’s background.
• Next, go to Processes tab and stop each of the programs by clicking on End Process button.

• Once, you have completed these steps now, check for the error.

Also Read: 5 Tricks To Fix Access Database Error 2542

Way 2- Run the VBA Code

When I went through several forums & community websites, I found that many users have solved this problem by running the VBA command.

Thus, if you are eager to troubleshoot Access error 2110 can’t move the focus to the control, run the below streamlined VBA code in MS Access:

Way 3- Reinstall the Runtime Libraries

Most of the time, such sort of run-time errors can occur due to either using an outdated version of MS Visual C++ package or not being installed properly on your device.

All you need to do is to just install a fresh & current copy of the MS Visual C++ package to fix run-time error 2110 VBA.

• Firstly, uninstall the previously installed Microsoft Visual C++ package by navigating to Programs & Features.
• Then, find Microsoft Visual C++ Package.
• After this, click on the Uninstall option which you can on top of a list.

• Restart your PC.
• Finally, download the latest Microsoft Visual C++ Package from the Microsoft & then install it.

Way 4- Reinstall Graphics Driver to Fix Microsoft Access Can’t Move the Focus to The Control

If this run-time error is associated with a bad graphics driver, you should consider reinstalling it immediately.

For this, you have to follow the below steps:

• Press Windows + X keys >> click on Device Manager to open it.

• Find the graphics driver.
• Then, make right-click on a video card driver >> tap Uninstall.
• Finally, restart your PC & install it again.
• Now, check if the error is fixed.

Also Read: Access Error 2105: You Can’t Go To The Specified Record

Way 5- Free Up Disk Space

When your system is running low disk space, then you may also receive this runtime error 2110. Simple, free up some space on your device’s hard drive and restart your computer. This will eventually solve this problem.

That’s all…

Use the Best & Reliable Tool to Repair & Recover Corrupt Access Database

If you are looking for a risk-free way to fix MS Access runtime error 2110 can’t move focus, you should opt for the recommended solution i.e Access Database Repair & Recovery Tool.

This software has the ability to repair & recover the corrupted Access database .ACCDB & .MDB file successfully.

Key features of this tool:

• Retrieve the entire database table.
• Easily repair & recovers password-protected forms & modules.
• Shows preview of recovered database files.
• It supports numerous versions of the Access database including 2019, 2016, 2013, and 2010, installed on Windows 11, 10, 8.1, 8, 7, Vista, 2003, & XP versions.
• User-friendly.

* By clicking the Download button above and installing Stellar Repair for Access (14.8 MB), I acknowledge that I have read and agree to the End User License Agreement and Privacy Policy of this site.

So, simply download & install this program on your computer & resolve this error if occurred due to database corruption.

Once installed successfully, follow the below steps:

To Sum Up:

If you try all the aforementioned methods along with following their guidelines strictly then you can definitely fix Microsoft Access can’t move the focus to the control.

However, if this error had occurred due to Access database corruption, you should immediately opt for Access Database Repair & Recovery Tool.

For further queries & doubts, you can contact us on our FB & Twitter accounts.

VBForums Visual Basic Office Development [RESOLVED] Run-time error ‘2110’ Sep 1st, 2017, 11:17 AM #1 Thread Starter New Member [RESOLVED] Run-time error ‘2110’ Book1.zip Can’t move focus to the control because it is invisible, not enabled, or of a type that does not accept the focus. I’m getting this error and I do not understand how to fix it. Columns A and C are popped out in the userform where the information is transferred to the column to the right. Data in column C collects, and column A throws an error. The form does not see the information in column B. Maybe who can help with this problem? Thank you in advance. Code: Option Explicit Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim rMyRg As Range 'Set rMyRg = ActiveSheet.Range("O19").End(xlDown).Select 'Columns(2) Set rMyRg = ActiveSheet.Range("A5:A20", "C5:C20") Set rMyRg = Application.Intersect(rMyRg, Target) If Not rMyRg Is Nothing Then If Koregavimas.Visible = False Then Koregavimas.Show End If End If End Sub Code: Option Explicit Private Sub txtnewsum_KeyDown(ByVal KeyCode As MSForms.ReturnInteger, ByVal Shift As Integer) If KeyCode = 13 Then Unload Me ActiveCell.Value = Me.txtnewsum.Text ThisWorkbook.Save End Sub Sub UserForm_Initialize() Worksheets("Sheet1").Select ActiveCell.Offset(0, 1).Select Me.txtnewsum.Text = ActiveCell.Value With txtnewsum .SetFocus .SelStart = 0 .SelLength = Len(.Text) End With End Sub Sep 1st, 2017, 04:05 PM #2 Re: Run-time error ‘2110’ By the looks of things, VBA is what you are using, not VB6….Correct? If so, I (or you) can notify the Moderators (little Warning triangle) and they will move this Thread to the appropriate part of this Forum (Office Development) Sep 1st, 2017, 04:17 PM #3 Thread Starter New Member Re: Run-time error ‘2110’ Originally Posted by SamOscarBrown By the looks of things, VBA is what you are using, not VB6….Correct? If so, I (or you) can notify the Moderators (little Warning triangle) and they will move this Thread to the appropriate part of this Forum (Office Development) Yes, you right. It’s VBA. My fault. Sep 1st, 2017, 05:41 PM #4 Re: Run-time error ‘2110’ No problem…I’ll alert the mods Sep 2nd, 2017, 01:21 AM #5 Re: Run-time error ‘2110’ s1978 I assume that txtnewsum is a TextBox Object Which line throws the error? Spoo Sep 2nd, 2017, 01:41 AM #6 Thread Starter New Member Re: Run-time error ‘2110’ Basically «.set Focus». In the example you can make sure. He sees only one ActiveSheet.Range. But I tried the solution below and it seems to work. I just do not know whether this is the right decision for the professional eye. Maybe Is there a better solution possible? Code: Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim rMyRg As Range Set rMyRg = Union(Range("A5:A20"), Range("C5:C20")) Set rMyRg = Application.Intersect(rMyRg, Target) If Not rMyRg Is Nothing Then If Koregavimas.Visible = False Then Koregavimas.Show End If End If End Sub Sep 2nd, 2017, 02:10 AM #7 Re: Run-time error ‘2110’ s1978 When you say are you referring to this line? Code: Sub UserForm_Initialize() ' Worksheets("Sheet1").Select ActiveCell.Offset(0, 1).Select Me.txtnewsum.Text = ActiveCell.Value With txtnewsum .SetFocus .SelStart = 0 .SelLength = Len(.Text) End With ' End Sub If so, what happens if you set a break-point on the line above it? Spoo Sep 2nd, 2017, 02:11 AM #8 Thread Starter New Member Re: Run-time error ‘2110’ Sep 2nd, 2017, 02:20 AM #9 Re: Run-time error ‘2110’ s1978 OK, you established part 1 ,, this line. Could you now do these 2 things 1. Tell me what happens if you set a break-point on the line above it? 2. Attach a screenshot of your UserForm Spoo Sep 2nd, 2017, 02:59 AM #10 Thread Starter New Member Re: Run-time error ‘2110’ Sep 2nd, 2017, 05:01 AM #11 Re: Run-time error ‘2110’ as it appears to be the only control on the form, why do you need to set focus to it? on testing it does not appear that the .setfocus is the line that is causing the error, more likely to be accessing the userform from the selection change event try Code: Application.EnableEvents = False before accessing the userform, make sure to enable events afterwards Last edited by westconn1; Sep 2nd, 2017 at 05:07 AM. i do my best to test code works before i post it, but sometimes am unable to do so for some reason, and usually say so if this is the case. Note code snippets posted are just that and do not include error handling that is required in real world applications, but avoid On Error Resume Next dim all variables as required as often i have done so elsewhere in my code but only posted the relevant part come back and mark your original post as resolved if your problem is fixed pete Sep 2nd, 2017, 06:07 AM #12 Thread Starter New Member Re: Run-time error ‘2110’ westconn1 I just found this code and try to adapt to my project. I don’t know if .setFocus necessary there. I just try to find solution. Maybe you can post whole code as it should be ? And what you think about code below ? After i use «Set rMyRg = Union(Range(«A5:A20»), Range(«C5:C20»))»no more show error. Code: Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim rMyRg As Range Set rMyRg = Union(Range("A5:A20"), Range("C5:C20")) Set rMyRg = Application.Intersect(rMyRg, Target) If Not rMyRg Is Nothing Then If Koregavimas.Visible = False Then Koregavimas.Show End If End If End Sub Thanks a lot Sep 2nd, 2017, 06:10 AM #13 Re: Run-time error ‘2110’ try like Code: Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim rMyRg As Range Set rMyRg = Union(Range("A5:A20"), Range("C5:C20")) Set rMyRg = Application.Intersect(rMyRg, Target) If Not rMyRg Is Nothing Then Application.EnableEvents = False If Koregavimas.Visible = False Then Koregavimas.Show End If Application.EnableEvents = True End If End Sub Last edited by westconn1; Sep 2nd, 2017 at 07:53 AM. i do my best to test code works before i post it, but sometimes am unable to do so for some reason, and usually say so if this is the case. Note code snippets posted are just that and do not include error handling that is required in real world applications, but avoid On Error Resume Next dim all variables as required as often i have done so elsewhere in my code but only posted the relevant part come back and mark your original post as resolved if your problem is fixed pete Sep 2nd, 2017, 07:30 AM #14 Re: Run-time error ‘2110’ Thread moved from the ‘VB6’ forum to the ‘Office Development/VBA’ forum. Sep 3rd, 2017, 04:50 PM #15 Thread Starter New Member Re: Run-time error ‘2110’ This line’s won’t help. When hit enter, it’s think longer than without thees lines. Sep 4th, 2017, 03:04 AM #16 Re: Run-time error ‘2110’ i tested and it was all working ok i do my best to test code works before i post it, but sometimes am unable to do so for some reason, and usually say so if this is the case. Note code snippets posted are just that and do not include error handling that is required in real world applications, but avoid On Error Resume Next dim all variables as required as often i have done so elsewhere in my code but only posted the relevant part come back and mark your original post as resolved if your problem is fixed pete Sep 4th, 2017, 04:14 PM #17 Thread Starter New Member Re: Run-time error ‘2110’ Westconn1, thanks for your time and help. VBForums Visual Basic Office Development [RESOLVED] Run-time error ‘2110’ Posting Permissions You may not post new threads You may not post replies You may not post attachments You may not edit your posts   BB code is On Smilies are On [IMG] code is On [VIDEO] code is On HTML code is Off Forum Rules

Click Here to Expand Forum to Full Width