Ошибка 1907 не удалось зарегистрировать шрифт office 2010

Эта статья на английском языке: 961506

Источник:служба технической поддержки Майкрософт

БЫСТРАЯ ПУБЛИКАЦИЯ.

СТАТЬИ БЫСТРОЙ ПУБЛИКАЦИИ ПРЕДОСТАВЛЯЮТ СВЕДЕНИЯ НЕПОСРЕДСТВЕННО ИЗ ТЕХНИЧЕСКОЙ ПОДДЕРЖКИ МАЙКРОСОФТ. СВЕДЕНИЯ, СОДЕРЖАЩИЕСЯ В НАСТОЯЩЕМ ДОКУМЕНТЕ, СОЗДАНЫ В ОТВЕТ НА ЭКСТРЕННЫЕ ИЛИ УНИКАЛЬНЫЕ ПРОБЛЕМЫ, ИЛИ ПРЕДНАЗНАЧЕНЫ ДОПОЛНИТЬ ИНФОРМАЦИЮ ДРУГИХ БАЗ ЗНАНИЙ.

Во время установки Microsoft Expression Web 2 или 2 для Microsoft Expression Studio может
возникновение ошибки 1907 регистрации файла шрифта. Файл журнала должен содержать строку
следующее:

3: 48: 25 PM Пятница, 18 июля 2008 г.: MSI(ERROR): «Ошибка 1907.Could не удалось зарегистрировать шрифт.
Проверьте наличие необходимых разрешений для установки шрифтов и что система
поддерживает этот шрифт. «

Решение

Для решения этой проблемы:

Если вы не являетесь администратором, выполните шаги 1-5. Если системный администратор выполните шаг 1 и затем перейдите к шагу 5.

1. Обзор для запуска —> программы —> Стандартные.

2. Щелкните правой кнопкой мыши в командной строке.

3. Нажмите кнопку пользователь:

4. Выберите Учетную запись пользователя и введите учетные данные администратора системы. и нажмите кнопку ОК.

5. В командной строке введите следующую команду:

   SFC /SCANNOW

6. Разрешить для сканирования и перезагрузите компьютер, если вас просят. Сканирование может также потребоваться
   Вставьте диск операционной системы, который был установлен с, поэтому необходимо иметь, поблизости.

   После завершения этой проверки запуска установки Expression Web 2 или Expression Studio 2 снова.

ОТКАЗ ОТ ОТВЕТСТВЕННОСТИ

КОРПОРАЦИЯ МАЙКРОСОФТ ИЛИ ЕЕ ПОСТАВЩИКИ СДЕЛАТЬ НЕ ПРЕДСТАВЛЕНИЯ ИЛИ ГАРАНТИЙ О ПРИГОДНОСТИ, НАДЕЖНОСТЬ И ТОЧНОСТЬ СВЕДЕНИЙ, СОДЕРЖАЩИХСЯ В ДОКУМЕНТАХ И СВЯЗАННЫЕ РИСУНКИ, ОПУБЛИКОВАННЫЕ НА ЭТОМ ВЕБ-САЙТЕ (ДАЛЕЕ «МАТЕРИАЛЫ») ДЛЯ ЛЮБЫХ ЦЕЛЕЙ. МАТЕРИАЛЫ МОГУТ СОДЕРЖАТЬ ТЕХНИЧЕСКИЕ НЕТОЧНОСТИ ИЛИ ОПЕЧАТКИ И МОЖЕТ БЫТЬ ПЕРЕСМОТРЕНО В ЛЮБОЕ ВРЕМЯ БЕЗ ПРЕДВАРИТЕЛЬНОГО УВЕДОМЛЕНИЯ.

В МАКСИМАЛЬНОЙ СТЕПЕНИ, ДОПУСКАЕМОЙ ПРИМЕНИМЫМ ЗАКОНОДАТЕЛЬСТВОМ, КОРПОРАЦИЯ МАЙКРОСОФТ ИЛИ ЕЕ ПОСТАВЩИКИ DISCLAIM И ИСКЛЮЧИТЬ ВСЕ ПРЕДСТАВЛЕНИЯ, ГАРАНТИЙ И УСЛОВИЙ ЛИ EXPRESS, КОСВЕННЫХ ИЛИ УСТАНОВЛЕННЫХ ЗАКОНОМ, ВКЛЮЧАЯ, НО НЕ ОГРАНИЧЕН, ГАРАНТИЙ, УСЛОВИЙ ИЛИ ЗАГОЛОВКА, ОТЛИЧНЫХ ОТ КОНТРАФАКЦИИ, ИСПРАВИВ ОШИБКУ ИЛИ КАЧЕСТВА, ТОВАРНОСТИ И ПРИГОДНОСТИ ДЛЯ ОПРЕДЕЛЕННОЙ ЦЕЛИ, В ОТНОШЕНИИ МАТЕРИАЛОВ.

Примечание. Это ЭКСПРЕСС-ПУБЛИКАЦИЯ, подготовленная непосредственно службой технической поддержки Майкрософт . Сведения, содержащиеся в данном документе, предоставлены в качестве отклика на возникшие проблемы. Из-за срочности в материалах могут быть опечатки, и в любое время и без уведомления в них могут быть внесены изменения. Чтобы получить дополнительные сведения, см. Условия использования.

Hi,

Thank you for using
Microsoft Office for IT Professionals Forums.

From your description, I would suggest to try the following method:

Note:
The following scan process may ask you to insert the operating system disc that you originally installed from, so you need to have that nearby.

1.Browse for
Start —> Programs —> Accessories.

2.Right Click on
Command Prompt.

3.Click
Run As:

4.Click
The Following User and enter the credentials of a system administrator. and click OK.

5.In the command window, type:

SFC /SCANNOW

6.Allow the system to scan and reboot if it asks you to. The scan may also ask you to

insert the operating system disc that you originally installed from, so you need to have that nearby.

After this scan is completed, please try to reinstall Office 2010.

Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.

Sincerely

Rex Zhang

———————————————————————————

Please remember to mark the replies as answers if they help and unmark them if they provide no help.

• Marked as answer by

  Tuesday, October 4, 2011 2:29 AM

You may receive the “error 1907 could not register font” when installing, opening, upgrading, or uninstalling MS Office 365, Access 2016, or Access 2013. However, it is quite annoying to encounter this error. Though in this post, I will discuss the common causes behind Microsoft Access error 1907 could not register font & effective workarounds to get rid of it.

I will also mention the convenient Access Repair Tool that can help you to fix database corruption. So, before proceeding further, let’s see how the error looks like:

What Is Error Code 1907 In Access Font?

The “Error 1907. could not register font. verify that you have sufficient permissions to install fonts” simply means that there is a lack of permission for installing a font. Generally, this error occurs while installing, opening, upgrading, or uninstalling MS Office 365, Access 2016, or Access 2013.

This specific error 1907 Microsoft Office 2010 is not only reserved for Access users but, is also conquered by users of MS Excel, Outlook, Word, Visio, and PowerPoint applications. Meanwhile upgrading their respective MS Office or after upgrading their system operating system to Windows 10.

However, below are the common reasons for error code 1907:

• Your system must be installed with 2 different versions of MS Access.
• Interruption while installing MS Office or Office 365.
• Corruption of the MS Office system file.
• Maybe your application is facing some network conflicts issue.
• Windows firewall and Antivirus shield might be restricting the office installation.
• MS Office Access application didn’t completely update.

So, as you are aware of the major factors now, let’s proceed to fix error 1907 could not register font Access 2016/2019.

Method 1- Run System File Checking to fix Error code 1907

The system file checker (SFC) tool is the latest technique to make a cross-check and match for the corrupt/lost system files. Through this utility can scan off your PC and retrieve corrupt/lost files. If the Windows resource protection files somehow missed out, then your PC will start behaving differently. Your MS Access application also suffers issues like:

Here are the following steps to run sfc.exe or the System file checker tool

• Tap the Windows key
• Now search for the cmd or command prompt
• Make a right-click on the command prompt option and run as administrator.

• After opening the command prompt area. Just type the below-mentioned command and hit on the enter option.

                     SFC /SCANNOW

 After doing this, the above command will make a complete scan and verify the protected system files. Also, retrieve back the corrupted or damaged files along with one cached copy present in the PC at

%WinDir%\System32\dllcache

It represents the Windows System folder.

Note: it’s recommended not to shut down the command prompt unless the verification reaches to 100%.

• Now make a check whether the error is fixed or not.

Also Read: Fix Run-Time Error 3211: The Database Engine Could Not Lock Table

Method 2- Rebuilt/Repair Office Registry keys to Fix Error Code 1907

It is also seen that MS Access error 1907 could not register font also encounters in the registry corruption situation.

Such a registry corruption issue occurs due to the installation of unidentified applications or outdated antivirus versions. So, it’s needed to check the status of the registry key for the successful installation of Microsoft Office 365 or Access 2016 or 2013.

For checking out the registry key status, follow the below-mentioned steps:

• First of all open the Registry Editor

• After then check out the default values set in

Computer\HKEY_CURRENT_USER\Software\Microsoft\Office\Common

Follow the Registry navigation given below to check the status:

Computer\

Computer\HKEY_CURRENT_USER\

Computer\HKEY_CURRENT_USER\Software\

Computer\HKEY_CURRENT_USER\Software\Microsoft\

Computer\HKEY_CURRENT_USER\Software\Microsoft\Office\

Computer\HKEY_CURRENT_USER\Software\Microsoft\Office\Common

If the default key in Office common registry is set as 1 or 0, delete the key and click Ok

• Check For Default Values Set In

Computer\HKEY_USERS\S-1-5-21-1499667035-1142950880-1989581963-1001\Software\Microsoft\Office\Common

Just follow up this below-mentioned Registry navigation to check out the status:

Computer\

Computer\HKEY_USERS\

Computer\HKEY_USERS\S-1 -5-21-1499667035-1142950880-1989581963-1 001\

Computer\HKEY_USERS\S-1 -5-21-1499667035-1142950880-1989581963-1 001\Software\

Computer\HKEY_USERS\S-1 -5-21-1499667035-1142950880-1989581963-1 001\Software\Microsoft\

Computer\HKEY_USERS\S-1 -5-21-1499667035-1142950880-1989581963-1 001\Software\Microsoft\Office\

Computer\HKEY_USERS\S-1 -5-21-1499667035-1142950880-1989581963-1 001\Software\Microsoft\Office\Common

Well, the default key in the MS Office registry is either set to 0 or 1. To delete the key and tap the OK option.

Method 3- Uninstall & Reinstall Latest MS Office programs

In many cases, it is seen that the former version of MS Access installed on the PC won’t allow installation of the latest MS Office 2016/ Office 365/Office 2013 to avoid duplication.

This may display the could not register font. verify that you have sufficient permissions to install font meanwhile installing or upgrading the MS Access application.

Therefore it’s recommended to uninstall or remove the previously installed MS Access application before installing up the latest one.

A) To uninstall or update the previous version of office:

• Open the control panel and then choose the programs and features
• Hit on the Microsoft Office and choose the Uninstall option.

• After finishing off the uninstallation process. Install the latest version of Office.

B) Remove duplicate Office contents:

For 32 bit version:

• Then go to your system C:/Program files and then hit on the Microsoft Office folder.
• From this folder delete the MS Office 15, MS Office 16 & MS Office folders

For 64 bit version:

• Then go to your system C:/program files(x86) and then hit on the Microsoft Office folder.
• After then delete the Microsoft Office 15, Microsoft Office 16 & Microsoft Office folders.

C) Remove Previous Office Keys Manually:

• In your PC open the registry editor
• After then browse for the below keys in the registry editor

 HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\ClickToRun

HKEY_LOCAL_MACHINE\SOFTWARE\MicrosoftAppVISV

HKEY_CU RRENT_USER\Software\Microsoft\Office

• Once you find these just delete off these keys

D) Remove the Office scheduled tasks

1. To perform this, firstly open the Command Prompt window by run as administrator.
2. Now in the opened command prompt Window. Just type the below-mentioned commands and make press Enter after typing each command:

schtasks.exe /delete /tn “\Microsoft\Office\Office Automatic Updates”
schtasks.exe /delete /tn “\Microsoft\Office\Office Subscription Maintenance”
schtasks.exe /delete /tn “\Microsoft\Office\Office Click To Run Service Monitor”

Method 4- Close The Problematic Process From The Task Manager

1. Firstly open the Task Manager.
2. After then tap on the Process tab.
3. In the opened list of task managers if any of the following processes seem running. Then make a right-click on each process and then tap to the End task button.

• .exe
• setup*.exe

Also Read: Resolve “The Microsoft Jet Database Engine Could Not Find The Object” Error

Method 5- Delete the Start Menu Shortcuts to Fix Error 1907 Could Not Register Font in Access

Another method that you can try to solve this error is to delete the start menu shortcuts. Here is the steps to to do:

• Open the Command Prompt Window by run as administrator.

• Now in the opened cmd Window type the following path and after that press the enter option.

%ALLUSERSPROFILE%\Microsoft\Windows\Start Menu\Programs,

• After then delete the folder of “Microsoft Office 2016 Tools”.

Recommended- Fix Access Database Corruption

Access Database Repair Tool is used worldwide to repair the corrupted & damaged MS Access database along with recovering its objects in the new database.

Even this software has the ability to display the preview of all the recoverable DB objects like tables, queries, reports, forms, and more before saving them into the chosen location.

So, just download, install, and try this tool to fix Access corruption (ACCDB & MDB) with ease.

* By clicking the Download button above and installing Stellar Repair for Access (14.8 MB), I acknowledge that I have read and agree to the End User License Agreement and Privacy Policy of this site.

Steps to Use Access Repair Tool

Wrap Up:

So, this is all about how to fix error 1907. could not register font. verify that you have sufficient permissions to install fonts. Even after following the above methods, if you are encountering the same error, then immediately contact a technical expert to solve it.

Apart from this, if you are facing any other issue related to the Access database, contact us through our official Twitter or Facebook page.

Модераторы: bartram, Akella

Поиск:

 

0 Пользователей читают эту тему (0 Гостей и 0 Скрытых Пользователей)

0 Пользователей:

« Предыдущая тема | MS Windows | Следующая тема »