- Home
- chevron_right
- Полезности для Android
- chevron_right
- Ответы на вопросы читателей
- chevron_right
- Как исправить Brom Error S Checksum Error 1041
Вопрос: Как исправить Brom Error S Checksum Error 1041?
Здравствуйте! Запустил прошивку и в самом начале ошибка 1013. Потом всё дошло до ста и ошибка 1041. После этого планшет перестал включаться и реагировать на зарядку.
Подскажите пожалуйста, что теперь с ним делать?
Как исправить Brom Error S Checksum Error 1041 — быстрое решение
Ошибка 1041 появляется из-за несовпадения контрольных сумм в скачанной прошивке, это можно исправить по инструкции:
- Откройте SP Flash Tool
- Нажмите на Help
- Open Logs Folder
- Удалите все логи программы
- Откройте папку с прошивкой
- Удалите файл Checksum.ini
- Запустите прошивку в режиме Format+Download
У вас получилось исправить Error 1041? Поделитесь в комментариях!
-
#1
Не получается прошить телефон Lenovo A328.
Пробовал разные прошивки и разные версии Flash Tool.
При прошивке через Firmware-Upgrade ошибка (8045) SP FLASH TOOL ERROR
При прошивке через Download ошибка BROM ERROR:S_CHKSUM_ERROR(1041)
При попытке отформатировать BROM ERROR:S_DL_READ_PT_FAIL (5073)
Программаторов нет.
Флешка перешла в read only ?
Подскажите пожалуйста как прошить этот телефон ?
-
476,7 КБ
Просмотры: 378 -
319 КБ
Просмотры: 278
-
#3
Похожая история, только телефон принесли включающийся, но с ошибками приложений. Т.е. рабочий.
После прошивки версией Flash Tool, шедшей в комплекте не включился.
Прошивка без галок проходит без проблем с тем же результатом.
С галками ошибка 1041.
Тоже флэшка сдохла, получается?
-
#4
Точно такая же проблема как выше, один в один. Такое ощущение что внутри не A328. Решил кто нибудь проблему?
-
#5
Точно такая же проблема как выше, один в один. Такое ощущение что внутри не A328. Решил кто нибудь проблему?
решил. заменил флеш и прошил.
-
#7
Тоже интересует вопрос какую EMMC ставили ?
-
#8
вот такую —
купить чтобы получить доступ к скрытому контенту.
-
#9
решил. заменил флеш и прошил.
Флешка на компаунде?Даже прошатать не могу-грею-грею, все вокруг туже шатается, а фешка никак…
-
#10
Флешка на компаунде?Даже прошатать не могу-грею-грею, все вокруг туже шатается, а фешка никак…
конечно на компаунде)
-
#11
удаляем максимум компаунда, флюс,греем нижним, даем верхний и аккуратно снимаем.
-
#12
Да уже поздно. После
грею-грею, все вокруг шатается
надо перекатывать и проц с КП.
Skip to content
На чтение 2 мин. Опубликовано
4 июня 2018 | Просмотров: 6712 |
Начнем с того, что эта ошибка может появляться, когда ВЫ запускаете процесс перепрошивки во флештуле. В самом начале, по идее, должна появиться ошибка 1013. Когда процесс дойдет примерно до 100%, то вылезет та самая ошибка 1041. К сожалению, когда Вы столкнетесь с этим, то Ваше устройство может перестать включаться. Печально.
После проделанных действий ошибка должна исчезнуть, а Ваш смартфон или планшет должен нормально прошиться и запуститься в штатном режиме. Если у Вас не получилось исправить или Вы знаете другой способ решения вопроса, то напишите об этом в комментариях. Официальная версияВ процессе прошивки устройств Android при помощи программы SP Flash Tool периодически возникают ошибки, на решение которых собственными силами часто уходит достаточно большое количество времени. Для вашего информирования и удобства, выполнена подборка самых распространенных кодов ошибок с подробным описанием и вариантами их решения и устранения. В некоторых случаях после прошивки на Andro > Как исправить Brom Error S Checksum Error 1041Код ошибки 1041 может появляется из-за сбоев в несовпадении контрольных сумм в скачанной прошивке на вашем Android-устройстве. Итак если у вас не получилось «гладко» перепрошить смартфон, исправить это можно выполнив следующие шаги:
Возможно видео-инструкция ниже, вам поможет! После проделанных выше действий вам удасться устранить Error 1041. Если у Вас есть другие варианты как исправить ошибку, поделитесь в комментариях!
Вы садитесь за компьютер, нажимаете на мышку, а она 0
Проблемы с изображением у компьютера — не редкость. 0
Возможности современной техники не перестают удивлять. 0
Для подключения геймпада Defender Game Master G2 к 0
Всем известная компания выпустила обновленную линейку 0
Быстро завершить работу компьютера без необходимости 0
Если вы устали от ярких интерфейсов, то темный режим 0
Беспроводные периферийные устройства прочно влились в оборот. 0 |
Help BROM ERROR : S_CHKSUM_ERROR (1041) with SP FLASH TOOL ALL VERSION
-
Thread starterscratch7
-
Start date
You should upgrade or use an alternative browser.
-
#1
BROM ERROR : S_CHKSUM_ERROR (1041) with SP FLASH TOOL ALL VERSION
-
#2
Remember: we only know what you tell us, and it’s best not to make assumptions because the problem could be in something you assumed was correct and didn’t mention.
That said, «checksum error» sounds like the file you are trying to flash failed a verification test (either because it is corrupt or because it is unsigned and the tool is checking for a signature — I don’t know this tool so can’t do more than speculate).
-
#3
Lenovo S920 hardware memory of 8 GB
Android Kitkat S920I 220 410 722 ROW happen bootloop.
I had trouble installing (flashing) android.
1. Some of the tools in the SP version of Flash tool (9 versions) I already use, with some Stock ROM 4 each and Custom ROM.zip 5 call now.
In the first step to use the stock ROM Flash tool SP Firmware Upgrade manner, Format ALL + Download, Download, (mark DA, DL, All with cheksum).
Battery apart when it is flashing.
I have done no progress. warning on SP Flash tool raises the following
BROM ERROR: S_CHKSUM_ERROR (1041),
2. In the ROM installation through ROM.zip SDCard using CWM v5.5.5.0.4 for Lenovo S920_ROW.
before I install previous ROM.zip msh no data backup, and I do a Restore, but get the following warning
Error while restoring / system!
> Install ROM.zip I’ve already done, according to existing procedures (dalvick wipe, data format + system + cache). but it can be a warning of the CWM
(status 7) couldn; t open directory
Please direction in a problem that occurs on the first item ..
thank you,
-
#4
Thank you for having responded earlier,
Lenovo S920 hardware memory of 8 GB
Android Kitkat S920I 220 410 722 ROW happen bootloop.
I had trouble installing (flashing) android.
1. Some of the tools in the SP version of Flash tool (9 versions) I already use, with some Stock ROM 4 each and Custom ROM.zip 5 call now.
View attachment 79649In the first step to use the stock ROM Flash tool SP Firmware Upgrade manner, Format ALL + Download, Download, (mark DA, DL, All with cheksum).
Battery apart when it is flashing.
I have done no progress. warning on SP Flash tool raises the following
BROM ERROR: S_CHKSUM_ERROR (1041),View attachment 79650
2. In the ROM installation through ROM.zip SDCard using CWM v5.5.5.0.4 for Lenovo S920_ROW.
before I install previous ROM.zip msh no data backup, and I do a Restore, but get the following warning
Error while restoring / system!
> Install ROM.zip I’ve already done, according to existing procedures (dalvick wipe, data format + system + cache). but it can be a warning of the CWM
(status 7) couldn; t open directoryPlease direction in a problem that occurs on the first item ..
thank you,
i have the same problem..did u find any solution to it?
-
#5
-
#6
Usual cause of corruption is a bad download of the rom.
-
#7
-
#8
-
- Mar 5, 2010
-
- 22,319
-
- 23,821
-
- 2,138
-
-
Indy
-
#9
any had solved this problem? please help
Welcome to our AndroidForums, Dave.
It’s hard to tell what the problem and/or eventual solution is since none of the posters indicated if re-downloading the file / ROM solved their issue…(i.e., due to an incomplete and/or corrupted download).
Although we might infer that given no further responses, that might have been the solution.
-
#10
Tried to re-download ROMs but nothing new happened.
Anyone has any solution or recommendation?
-
#11
-
#12
I tried 3 ROM files, and all can’t be corrupt.
-
#13
-
#14
-
#15
Replace emmc and flashing again.
Or Reparted Emmc with MTK droid tool.
-
#16
Thank you for having responded earlier,
Lenovo S920 hardware memory of 8 GB
Android Kitkat S920I 220 410 722 ROW happen bootloop.
I had trouble installing (flashing) android.
1. Some of the tools in the SP version of Flash tool (9 versions) I already use, with some Stock ROM 4 each and Custom ROM.zip 5 call now.
View attachment 79649In the first step to use the stock ROM Flash tool SP Firmware Upgrade manner, Format ALL + Download, Download, (mark DA, DL, All with cheksum).
Battery apart when it is flashing.
I have done no progress. warning on SP Flash tool raises the following
BROM ERROR: S_CHKSUM_ERROR (1041),View attachment 79650
2. In the ROM installation through ROM.zip SDCard using CWM v5.5.5.0.4 for Lenovo S920_ROW.
before I install previous ROM.zip msh no data backup, and I do a Restore, but get the following warning
Error while restoring / system!
> Install ROM.zip I’ve already done, according to existing procedures (dalvick wipe, data format + system + cache). but it can be a warning of the CWM
(status 7) couldn; t open directoryPlease direction in a problem that occurs on the first item ..
thank you,
Delete the chksum file from the rom You downloaded
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.