Ошибка 0xc002f210 sql

  • yes that is because the Table (or in other words excel sheet) exists in the excel file,
    it’s like asking can you  CREATE 2 tables with the same name in the same DB ? NO you can’t

    here you have the same situation, to by pass this is to rename the file each time to

    @Filename + @ CurrentDate + «.xls»   —-> you wil get       FileName 2009-08-24 12:41:30.xls
    use a a script task and variable to do that before the CREATE TABLE ……

    PLEASE MODIFY MY CODE AND YOU»LL GET THE SAME RESULT

            Dim strDate As String

            strDate = DateTime.Now.ToString(«yyyy-MM-dd-HHmmssff»)

            Dim strDesFolderPath As String
            Dim strPathAndFileName As String
            Dim strTemp As String
            Dim strLen As Integer
            Dim strPointer As Integer
            » Last «\» in the string from the right hand side of the string
            Dim LastSlashPosition As Integer
            Dim strFileName As String

            »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»’
            ‘
            »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»’
            strPathAndFileName = Dts.Variables(«uVar_SourceConStr_DataSource»).Value.ToString()

            strLen = strPathAndFileName.Length

            ‘Bad file name and extention   
            If strLen < 6 Then
                Dts.TaskResult = Dts.Results.Failure
            End If

            LastSlashPosition = strPathAndFileName.LastIndexOf(«\»)
            strPointer = strLen — (LastSlashPosition + 1)

            strFileName = Right(strPathAndFileName, strPointer)

            strLen = strFileName.IndexOf(«.»)
            strFileName = Left(strFileName, strLen)

            strDesFolderPath = Dts.Variables(«uVar_BackupActiveFolder»).Value.ToString()

            strTemp = strDesFolderPath + «\Orbit Move file — » + strDate + » — » + strFileName + «.xls«

            Dts.Variables(«uVar_SourceFileNameRenamed»).Value = strTemp
            ‘——————————————————————-
            Dts.TaskResult = Dts.Results.Success


    Sincerely SH — Please kindly don’t forget to mark the post(s) that answered your question and/or vote for the post

    • Proposed as answer by

      Thursday, August 27, 2009 5:27 PM

    • Marked as answer by
      markwt
      Friday, August 28, 2009 3:29 PM

  • I have just started learning SQL Server, I am trying to use Import Export wizard to import data from excel file to one of the table in the database. But I am getting an error 0xc002f210.

    I understood only that it is taking length of excel file cell as 255 but the SQL Server table length is different. I am unable to understand why it is happening.

    Validating (Error)

    Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column «Name» with a length of 255 to database column «Name» with a length of 50.
    (SQL Server Import and Export Wizard)

    Warning 0x802092a7: Data Flow Task 1: Truncation may occur due to inserting data from data flow column «GroupName» with a length of 255 to database column «GroupName» with a length of 50.
    (SQL Server Import and Export Wizard)

    Error 0xc002f210: Preparation SQL Task 1: Executing the query «TRUNCATE TABLE [HumanResources].[Department]
    » failed with the following error: «Cannot truncate table ‘HumanResources.Department’ because it is being referenced by a FOREIGN KEY constraint.». Possible failure reasons: Problems with the query, «ResultSet» property not set correctly, parameters not set correctly, or connection not established correctly.
    (SQL Server Import and Export Wizard)

    marc_s's user avatar

    marc_s

    734k176 gold badges1332 silver badges1460 bronze badges

    asked May 4, 2015 at 10:22

    Amit Sharma's user avatar

    So the error you are receiving is different from the warnings that you are getting. The warnings are simply informing you that you are taking a larger column and putting it into a smaller column, so there is the possibility of data truncation.

    The error will give you some insight into the purpose of using a Foreign Key Constraint. The technet article will give you an in depth understanding of it if you read through it.
    TechNet

    But essentially, referential integrity by way of foreign key constraints make it so that the «link» between data cannot be broken on the Primary Key side (table «Department»). In order to delete data from the Primary Key table, you must first either remove the foreign key, or delete the data first from the Foreign Key table.

    You should re-evaluate two things:

    1) Whether you actually should be truncating the Primary key table

    2) Which table has a foreign key linked to the Department table’s primary key.

    answered May 4, 2015 at 16:03

    Razzle Dazzle's user avatar

    Razzle DazzleRazzle Dazzle

    4812 gold badges8 silver badges20 bronze badges

    1

    • Remove From My Forums
    • Question

    • Hi,

      I have the following error; —

      Error: 0x0 at Update All Tables: String or binary data would be truncated.

      Error: 0xC002F210 at Update All Tables, Execute SQL Task: Executing the query «EXEC RFC.usp_UpdateAllTables» failed with the following error: «The statement has been terminated.». Possible failure reasons: Problems with the query, «ResultSet» property not set correctly, parameters not set correctly, or connection not established correctly.

      Task failed: Update All Tables

      This stored procedure has no parameters passed or output parameters as follows; —

      ALTER PROCEDURE [RFC].[usp_UpdateAllTables]

      AS

      EXEC RFC.usp_MyExceptions

      Test connection Succeeded on Destination Database for SSIS script.

      Ran the stored procedure in SSMS, no errors reported. Yet this same stored procedure still failed when executed within an Execute SQL Task this SSIS script.

      Any ideas please?


      Kieran Wood PGD SoftDev (Open), http://www.informationfind.net/

    Answers

    • To cut a long story short yesterday when re-building the SSIS Solution in BIDs the compiler reported that my solution was corrupt.

      After I had the initial panic; —

      I realised that there might be a connection within the above so,

      1) I deleted my connection manager object to my data destination

      2) Re-assigned the newly created connection manager object to the other objects which are targeted to this connection manager object.

      3) Re-built the SSIS solution.

      4) The SSIS script executed without reporting any errors including successfully running the stored procedure which previously executed fine in SSMS but not SSIS.

      So in summary I’ve concluded if a stored procedure runs in SSMS but not SSIS; —

      1) Check your SSIS connection manager object for the database which the stored procedure is processing.

      2) If it’s consistent with your SSMS authentication and the «test connection» button returns a successful result try deleting and re-creating your connection manager object.

      I hope the above is useful to somebody. If so please mark my reply as an answer.


      Kieran Wood PGD SoftDev (Open), http://www.informationfind.net/

      • Marked as answer by

        Saturday, February 28, 2009 10:40 PM

    • Remove From My Forums
    • Question

    • Hi,

      I have the following error; —

      Error: 0x0 at Update All Tables: String or binary data would be truncated.

      Error: 0xC002F210 at Update All Tables, Execute SQL Task: Executing the query «EXEC RFC.usp_UpdateAllTables» failed with the following error: «The statement has been terminated.». Possible failure reasons: Problems with the query, «ResultSet» property not set correctly, parameters not set correctly, or connection not established correctly.

      Task failed: Update All Tables

      This stored procedure has no parameters passed or output parameters as follows; —

      ALTER PROCEDURE [RFC].[usp_UpdateAllTables]

      AS

      EXEC RFC.usp_MyExceptions

      Test connection Succeeded on Destination Database for SSIS script.

      Ran the stored procedure in SSMS, no errors reported. Yet this same stored procedure still failed when executed within an Execute SQL Task this SSIS script.

      Any ideas please?


      Kieran Wood PGD SoftDev (Open), http://www.informationfind.net/

    Answers

    • To cut a long story short yesterday when re-building the SSIS Solution in BIDs the compiler reported that my solution was corrupt.

      After I had the initial panic; —

      I realised that there might be a connection within the above so,

      1) I deleted my connection manager object to my data destination

      2) Re-assigned the newly created connection manager object to the other objects which are targeted to this connection manager object.

      3) Re-built the SSIS solution.

      4) The SSIS script executed without reporting any errors including successfully running the stored procedure which previously executed fine in SSMS but not SSIS.

      So in summary I’ve concluded if a stored procedure runs in SSMS but not SSIS; —

      1) Check your SSIS connection manager object for the database which the stored procedure is processing.

      2) If it’s consistent with your SSMS authentication and the «test connection» button returns a successful result try deleting and re-creating your connection manager object.

      I hope the above is useful to somebody. If so please mark my reply as an answer.


      Kieran Wood PGD SoftDev (Open), http://www.informationfind.net/

      • Marked as answer by

        Saturday, February 28, 2009 10:40 PM

    Problem Description:

    I have SQL Server 2014 installed on my PC, working on a same project in my company, a worker send me a database to import.

    I followed the steps described here, but I get this error :

    Error 0xc002f210: Preparation SQL Task 1: Executing the query “CREATE TABLE [dbo].[~TMPCLP14521] (
    [Champ1] nvar…” failed with the following error: “Culture is not supported.
    Parameter name: culture
    3072 (0x0c00) is an invalid culture identifier.”.

    Possible failure reasons: Problems with the query, “ResultSet” property not set correctly, parameters not set correctly, or connection not established correctly.

    What is wrong?

    Solution – 1

    Solved , after reading this issue i found that in order to make the import work ,apparently ,the sqlserver and the system should have the same language format ;

    My Sql Server is in french ,my windows was in english format changing it to french format in setting>region>region format solved my problem.

    Понравилась статья? Поделить с друзьями:
  • Ошибка 0xc004f074 что делать
  • Ошибка 0xc000225 windows 10
  • Ошибка 0xc0000142 при запуске игры war thunder
  • Ошибка 0xc004f074 служба лицензирования программного обеспечения сообщила что
  • Ошибка 0xc000012f танки