Ошибка 093 311 xerox d110 - Решение и исправление самых разных ошибок на TopOshibok.ru

Dislikes: 0

11-08-2021

#1

Senior Tech

100+ Posts

Rep Power

24

Xerox D136 error 093-311

Hi all,

I’m after some advice please.

Replaced dispense assembly. Reset code to 0 (762-130), but fault comes back instantly.

In supplies under status everything is blank? I’ve never had this before.

Tried all eureka tips but I’m now stuck.

Any advice would be great.

Thank you
11-08-2021

#2

Re: Xerox D136 error 093-311

Did you seen this bulletin = 1436702
11-09-2021

#3

Senior Tech

100+ Posts

Rep Power

24

Re: Xerox D136 error 093-311

Originally Posted by adriansto

Did you seen this bulletin = 1436702

I did yes. Going to order CRUM assy and MCU.

I was hoping someone has seen the fault where supplies status was black.

I’ve tried another LVPS and IOT PWB from another machine but with no juy.

Hopefully MCU will sort it.

Thanks for you reply.
11-09-2021

#4

Re: Xerox D136 error 093-311

Originally Posted by fatfingers73

Hi all,

I’m after some advice please.

Replaced dispense assembly. Reset code to 0 (762-130), but fault comes back instantly.

In supplies under status everything is blank? I’ve never had this before.

Tried all eureka tips but I’m now stuck.

Any advice would be great.

Thank you

Check this out:

093-311 � Toner Dispense Failure

Xerox 4110 style (4110, 4112, or D95 families) — Fault Code 093-311: Toner Dispense Problems
11-09-2021

#5

Senior Tech

100+ Posts

Rep Power

24

Re: Xerox D136 error 093-311

Thanks, all that’s been replaced

Originally Posted by nikolai.aleksie
02-21-2022

#6

Junior Member

Rep Power

0

Re: Xerox D136 error 093-311

Was this ever resolved? We have a D95 doing the same thing. Replaced every related part and still having the problem.
02-21-2022

#7

Senior Tech

100+ Posts

Rep Power

24

Re: Xerox D136 error 093-311

In my case the client fitted the wrong dispense assembly.

He fitted a d95 assembly to a d136.

Originally Posted by webfoot

Was this ever resolved? We have a D95 doing the same thing. Replaced every related part and still having the problem.
08-18-2023

#8

Technician

Rep Power

9

Re: Xerox D136 error 093-311

Good day fellows. My D95 also have the same problem. I changed a brand new dispenser and only lasts for one week. Everything this problem appears basically I opened the dispenser and there will be be toner clumped and it will fill on one side only. Is it my toner ( which is OEM I assume) causes this never-ending issues for two months now. Any ideas and suggestions is greatly appreciated. Thanks.

Sent from my SM-A536E using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

Forum Rules

Источник

Dislikes: 0

11-08-2021

#1

Senior Tech

100+ Posts

Rep Power

23

Xerox D136 error 093-311

Hi all,

I’m after some advice please.

Replaced dispense assembly. Reset code to 0 (762-130), but fault comes back instantly.

In supplies under status everything is blank? I’ve never had this before.

Tried all eureka tips but I’m now stuck.

Any advice would be great.

Thank you
11-08-2021

#2

Re: Xerox D136 error 093-311

Did you seen this bulletin = 1436702
11-09-2021

#3

Senior Tech

100+ Posts

Rep Power

23

Re: Xerox D136 error 093-311

Originally Posted by adriansto

Did you seen this bulletin = 1436702

I did yes. Going to order CRUM assy and MCU.

I was hoping someone has seen the fault where supplies status was black.

I’ve tried another LVPS and IOT PWB from another machine but with no juy.

Hopefully MCU will sort it.

Thanks for you reply.
11-09-2021

#4

Re: Xerox D136 error 093-311

Originally Posted by fatfingers73

Hi all,

I’m after some advice please.

Replaced dispense assembly. Reset code to 0 (762-130), but fault comes back instantly.

In supplies under status everything is blank? I’ve never had this before.

Tried all eureka tips but I’m now stuck.

Any advice would be great.

Thank you

Check this out:

093-311 � Toner Dispense Failure

Xerox 4110 style (4110, 4112, or D95 families) — Fault Code 093-311: Toner Dispense Problems
11-09-2021

#5

Senior Tech

100+ Posts

Rep Power

23

Re: Xerox D136 error 093-311

Thanks, all that’s been replaced

Originally Posted by nikolai.aleksie
02-21-2022

#6

Junior Member

Rep Power

0

Re: Xerox D136 error 093-311

Was this ever resolved? We have a D95 doing the same thing. Replaced every related part and still having the problem.
02-21-2022

#7

Senior Tech

100+ Posts

Rep Power

23

Re: Xerox D136 error 093-311

In my case the client fitted the wrong dispense assembly.

He fitted a d95 assembly to a d136.

Originally Posted by webfoot

Was this ever resolved? We have a D95 doing the same thing. Replaced every related part and still having the problem.

Tags for this Thread

Bookmarks

Posting Permissions

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
[VIDEO] code is On
HTML code is Off

Forum Rules

Укладчик большой емкости

20-12

Xerox

D95/D110/D125 Копир/принтер

Руководство пользователя

Коды ошибок

Код ошибки

Возможная причина

Рекомендуемое решение

049-100

049-101

049-102

Ошибка датчика

верхнего лотка

• Осторожно удалите все

обрывки бумаги из областей

удаления застрявшей бумаги.

• Выключите и включите

устройство.

• Если проблема сохраняется,

обратитесь в центр поддержки

заказчиков.

049 104

049 105

049 106

049 108

Ошибка датчика

обходного лотка

• Осторожно удалите все

обрывки бумаги из областей

удаления застрявшей бумаги.

• Выключите и включите

устройство.

• Если проблема сохраняется,

обратитесь в центр поддержки

заказчиков.

049 113

049 114

049 115

049 116

Ошибка датчика

укладчика

• Осторожно удалите все

обрывки бумаги из областей

удаления застрявшей бумаги.

• Выключите и включите

устройство.

• Если проблема сохраняется,

обратитесь в центр поддержки

заказчиков.

049 117

049 119

Ошибка датчика пути

обходного лотка

• Осторожно удалите все

обрывки бумаги из областей

удаления застрявшей бумаги.

• Выключите и включите

устройство.

• Если проблема сохраняется,

обратитесь в центр поддержки

заказчиков.

049 121

Ошибка датчика

выхода укладчика

• Осторожно удалите все

обрывки бумаги из областей

удаления застрявшей бумаги.

• Выключите и включите

устройство.

• Если проблема сохраняется,

обратитесь в центр поддержки

заказчиков.

Problem solving

9. Close the front cover completely. The machine will not operate if the front cover is

open even slightly.

Fault code

Cause and Remedy

002-770

Cause: Unable to process job template due to insufficient hard disk space.

Remedy: Remove unnecessary data from the hard disk to increase free disk space.

003-750

Cause: Unable to store any documents with 2 Sided Book Copy feature.

Remedy: Check the 2 Sided Book Copy settings.

003-751

Cause: The machine is unable to process size, because the specified document

area is too small.

Remedy: Increase resolution or scan area size.

003-753

Cause: The selected resolution was too large for scanning mixed size originals

using document feeder.

Remedy: Decrease Scan Resolution to 200dpi or less, and rescan.

003-754

Cause: An error occurred in the document scanner.

Remedy: Reprocess the job.

003-755

Cause: An error occurred in the document scanner.

Remedy: Reprocess the job.

003-760

Cause: An incompatible combination of features is specified in the document scan

conditions.

Remedy: Check the selected options.

003-761

Cause: The paper size of the tray selected for auto tray is different from the paper

size of the tray selected for Auto Repeat.

Remedy: Change the paper size for the tray, or change the Paper Type Priority

settings.

003-764

Cause: No document is scanned by Form Overlay.

Remedy: Prepare 2 documents or more.

003-795

Cause: When enlarging/reducing a scanned document to the specified paper size,

the reduction/enlargement ratio value exceeds the allowed range.

Remedy: Take one of the following actions:

Manually enter a reduction/enlargement ratio.

Change the paper size.

005-275

Cause: An error occurred in the document feeder.

005-280

Remedy: Power-cycle the machine. Contact the Customer Support Center.

005-281

005-282

005-283

005-284

10-12

User Guide

Источник

093-311 Rotary Assembly Failure………………………………………………………………………..

093-320 Developer Motor Failure RAP …………………………………………………………………

093-400 Black Toner Near Empty………………………………………………………………………..

093-406 Black Toner Pre-Near Empty ………………………………………………………………….

093-407 Y Toner Pre-Near Empty ……………………………………………………………………….

093-408 M Toner Pre-Near Empty……………………………………………………………………….

093-409 C Toner Pre-Near Empty ……………………………………………………………………….

093-414 Y Developer Housing is near End of Life ………………………………………………….

093-415 M Developer Housing is near End of Life …………………………………………………

093-416 C Developer Housing is near End of Life………………………………………………….

093-417 K Developer Housing is near End of Life ………………………………………………….

093-418 Y Developer Housing is Over End of Life …………………………………………………

093-419 M Developer Housing is Over End of Life…………………………………………………

093-420 C Developer Housing is Over End of Life …………………………………………………

093-421 K Developer Housing is Over End of Life …………………………………………………

093-423 Y Toner Near Empty ……………………………………………………………………………..

093-424 M Toner Near Empty……………………………………………………………………………..

093-425 C Toner Near Empty ……………………………………………………………………………..

093-912 Black Toner Empty………………………………………………………………………………..

093-916 Toner K CRUM not in position Failure ……………………………………………………..

093-924 Toner K Crum Communication Failure …………………………………………………….

093-925 Toner K Crum Data Broken Failure …………………………………………………………

093-926 Toner K Crum Data Mismatch Failure ……………………………………………………..

093-940 Toner Y CRUM Communication Failure …………………………………………………..

093-941 Toner M CRUM Communication Failure…………………………………………………..

093-942 Toner C CRUM Communication Failure …………………………………………………..

093-950 Toner Y CRUM Data Broken Failure ……………………………………………………….

093-951 Toner M CRUM Data Broken Failure……………………………………………………….

093-952 Toner C CRUM Data Broken Failure ……………………………………………………….

093-960 Toner Y CRUM Data Mismatch Failure ……………………………………………………

093-961 Toner M CRUM Data Mismatch Failure……………………………………………………

093-962 Toner C CRUM Data Mismatch Failure ……………………………………………………

093-970 Toner Y CRUM not in position Failure ……………………………………………………..

093-971 Toner M CRUM not in position Failure……………………………………………………..

093-972 Toner C CRUM not in position Failure ……………………………………………………..

094 BTR/IBT

094-320 2nd BTR Retract RAP……………………………………………………………………………

094-321 2nd BTR Contact RAP …………………………………………………………………………..

094-322 2nd BTR Retract RAP……………………………………………………………………………

094-323 2nd BTR Contact RAP …………………………………………………………………………..

094-417 IBT Near End of Life RAP ………………………………………………………………………

094-418 IBT Cleaner Near End of Life RAP ………………………………………………………….

094-419 2nd BTR Near End of Life RAP ………………………………………………………………

094-420 IBT End of Life RAP………………………………………………………………………………

094-421 IBT Cleaner End of Life RAP ………………………………………………………………….

094-422 2nd BTR End of Life RAP ………………………………………………………………………

102 User Interface

102-356 Controller Software RAP………………………………………………………………………..

102-380 UI Control RAP …………………………………………………………………………………….

102-381 UI Data Link RAP………………………………………………………………………………….

Revision

WorkCentre 7132

2-715

102-382 Application Layer Command RAP……………………………………………………………

2-716

116 Printing Control

2-716

116-220 ……………………………………………………………………………………………………………

2-717

116-310 ESS Font DIMM #2 RAP………………………………………………………………………..

2-717

116-311 ESS Font DIMM #3 RAP………………………………………………………………………..

2-718

116-312 HDD Encrypt Key RAP…………………………………………………………………………..

2-718

116-313 HDD Encrypt Setup RAP ……………………………………………………………………….

2-719

116-314 Ethernet Address RAP …………………………………………………………………………..

2-719

116-315 ESS DDR DIMM #1 R/W Check RAP ………………………………………………………

2-720

116-316 ESS DDR DIMM #2 R/W Check RAP ………………………………………………………

2-720

116-317 ESS ROM DIMM #1 Check RAP …………………………………………………………….

2-721

116-318 ESS ROM DIMM #2 Check RAP …………………………………………………………….

2-721

116-319 Controller UI Configuration……………………………………………………………………..

2-722

116-321 System Software RAP……………………………………………………………………………

2-722

116-322 WebDAV S/W Fail RAP …………………………………………………………………………

2-723

116-323 ESS NVRAM R/W Check RAP ……………………………………………………………….

2-723

116-324 System Controller RAP ………………………………………………………………………….

2-724

116-325 ESS Fan RAP ………………………………………………………………………………………

2-724

116-328 Controller Cache RAP……………………………………………………………………………

2-725

116-329 Serial Software RAP ……………………………………………………………………………..

2-725

116-330 HDD File System RAP …………………………………………………………………………..

2-726

116-331 Invalid Log Information RAP …………………………………………………………………..

2-726

116-332 ESS ROM RAP …………………………………………………………………………………….

2-727

116-333 LocalTalk Software RAP ………………………………………………………………………..

2-727

116-334 ESS NVRAM Data Compare Fail RAP …………………………………………………….

2-728

116-335 HDD RAP …………………………………………………………………………………………….

2-728

116-336 HDD Access RAP …………………………………………………………………………………

2-729

116-337 SNTP Software RAP ……………………………………………………………………………..

2-729

116-338 JBA RAP ……………………………………………………………………………………………..

2-730

116-340 Memory RAP………………………………………………………………………………………..

2-730

116-341 ROM Version RAP ………………………………………………………………………………..

2-731

116-342 Network Manager RAP ………………………………………………………………………….

2-731

116-343 Main PWB IC RAP ………………………………………………………………………………..

2-732

116-346 Formatter RAP ……………………………………………………………………………………..

2-732

116-348 Redirector RAP …………………………………………………………………………………….

116-349 SIF RAP ………………………………………………………………………………………………

2-733

116-350 AppleTalk Software RAP………………………………………………………………………..

2-733

116-351 Ether Talk Software RAP ……………………………………………………………………….

2-734

116-352 NetWare Software RAP …………………………………………………………………………

2-734

116-353 HDD Mechanical RAP……………………………………………………………………………

2-735

116-354 HDD Product RAP…………………………………………………………………………………

2-735

116-355 Agent Software RAP ……………………………………………………………………………..

2-736

116-356 HDD Format RAP………………………………………………………………………………….

2-736

116-357 PostScript RAP …………………………………………………………………………………….

2-737

116-358 Salutation Software RAP………………………………………………………………………..

2-737

116-359 Software RAP……………………………………………………………………………………….

116-360 SMB Software RAP……………………………………………………………………………….

116-361 Spool HDD RAP……………………………………………………………………………………

2-739

116-362 SSDP Software RAP……………………………………………………………………………..

2-739

116-363 Print Service Software RAP ……………………………………………………………………

2-740

116-364 Timer RAP……………………………………………………………………………………………

January 2007

2-13

2-740

2-741

2-742

2-743

2-744

2-745

2-746

2-747

2-748

2-749

2-750

2-751

2-752

2-753

2-754

2-755

2-756

2-757

2-758

2-759

2-760

2-761

2-762

2-763

2-764

2-765

Status-indicator-raps