No world with name deerisle ошибка - Решение и исправление самых разных ошибок на TopOshibok.ru

не запускает локальный сервер с картой deer isle, пишет, что «no world with name deerisle». хотя если поменять на чернорустьплюс, то сервер запускается.

Скачивал карту с оф. сервера разработчика, ставил стабильную ветку 5.1 и через steamworkshop добавлял файлы. В общем, всё как по гайдам. Закидывал в папку mpmissions папку empty.deerisle от разработчика и менял в serverDZ.cfg на template=»empty.deerisle». Но не запускается. Пробовал менять нейминг — не помогает. Если вернуть дефолтные настройки, то всё стартует. В чем может быть причина такой ошибки и как её решить?

Изменено 14 июля пользователем krashart74

(история изменений)

Источник

Перейти к контенту

Hi guys, question for anyone that is familiar with DayZ modding. I am having some trouble with getting the Namalsk mod in particular to load. I have been able to successfully load another mod (GoreZ) but Namalsk is a slightly different beast as it is a different map/mission.

The issue

When I change «template» in the Dayz class within dayzserver/serverfiles/cfg/dayzserver.server.cfg:116 from «dayZOffline.chernarusplus» to «regular.namalsk», the server cannot boot. I see in the logs «No world with name namalsk» which you can see at dayzserver/log/console/dayzserver-console.log:1577

What I have done so far

Followed @PandaStudiosSWE’s advice on DayZ — Mods — Profile folder? #3899 and learned how to configure the startparameters and specify the mods folder.
Successfully installed the GoreZ mod
From their default configs, I have modified the following files:

dayzserver/lgsm/config-lgsm/dayzserver/dayzsever.cfg (added startparameters)
dayzserver/serverfiles/cfg/dayzserver.server.cfg (configured server to use regular.namalsk)
dayzserver/serverfiles/profiles (just created the dir, it was autopopulated with stuff)
dayzserver/serverfiles/keys (added keys from mods)
dayzserver/serverfiles/mods (create dir and put mods in there)
dayzserver/serverfiles/mpmissions (added regular.namalsk)

Here is my dayzserver setup in full so you can look for yourselves. Any advice is appreciated

Here is just the log
dayzserver-console.log

You must be logged in to vote

Were you able to solve this issue? I am facing the same problem.

You must be logged in to vote

0 replies

As suggested by @JayC1337 here it is necessary to rename all files and folders of the mods to use only lowercase letters.

Old DayZ modding problem which exists since the Arma 2 mod: You have to change every file and folder to lowercase in your mod directory. Easiest way: apt install rename. You can rename files inside a folder with rename ‘y/A-Z/a-z/’ *

You must be logged in to vote

0 replies

Unfortunately, even after renaming the files, my client still freezes on connecting to the server with the same mods selected that are used on the server. Connecting to other Experimental Servers running Namalsk works fine.
I get some alarming server logs at the end of server startup:

19:22:18 [Script] scripts/3_Game/undergroundarealoader.c:83 | SpawnAllTriggerCarriers | [WARNING] :: [UndergroundAreaLoader GetData()] :: file not found in MISSION folder, your path is $mission:cfgundergroundtriggers.json Attempting DATA folder
19:22:18 [Script] scripts/3_Game/undergroundarealoader.c:83 | SpawnAllTriggerCarriers | [WARNING] :: [UndergroundAreaLoader GetData()] ::file not found in DATA folder, your path is DZ/worlds/namalsk/ce/cfgundergroundtriggers.json
19:22:18 String "STR_DN_UNKNOWN" not found (not in localization table)
19:22:18 String "STR_DN_UNKNOWN" not found (not in localization table)
19:22:18 String "STR_DN_UNKNOWN" not found (not in localization table)
19:22:18 Warning: No components in nstns_dayzgearlorepaper_files.p3d:geometry
19:22:18 [Script] scripts/5_Mission/missionmissionserver.c:89 | OnMissionStart | [WARNING] :: [EffectAreaLoader CreateZones] :: No contaminated area file found in MISSION folder, your path is $mission:cfgEffectArea.json Attempting DATA folder
19:22:18 [Script] scripts/5_Mission/missionmissionserver.c:89 | OnMissionStart | [WARNING] :: [EffectAreaLoader CreateZones] :: No contaminated area file found in DATA folder, your path is DZ/worlds/namalsk/ce/cfgEffectArea.json
19:22:18 Mission script has no main function, player connect will stay disabled!

Especially Mission script has no main function tells me there is still something very wrong. The server log is attached. Any ideas?

DayZServer_2022-10-08_19-22-08.RPT.log

You must be logged in to vote

0 replies

Can you post your dayzserver.cfg in ~/lgsm/config-lgsm/dayzserver where you add the mods? I had to write it like this because the ; was interpreted wrong: mods=»2405175615′;’1559212036′;’1582756848′;’2865478912″

You must be logged in to vote

0 replies

I was using:

startparameters="-ip=${ip} -port=${port} -config=${servercfgfullpath} -profiles=profiles '-mod=mods/@NamalskSurvival;mods/@NamalskIsland;' -limitFPS=60 -dologs -adminlog -freezeCheck"

now I tried your syntax:

mods="mods/@NamalskSurvival';'mods/@NamalskIsland"
startparameters="-ip=${ip} -port=${port} -config=${servercfgfullpath} -profiles=profiles -mod=${mods} -limitFPS=60 -dologs -adminlog -freezeCheck"

I also tried rename the mod folders to their workshop id and moving them to /serverfiles, and used mods="2289461232';'2289456201" but all produces the same result.

You must be logged in to vote

0 replies

Going to test it on my server later to see if I can reproduce it. Just to be sure: Did you edit your ~/Serverfiles/cfg/dayzserver.server.cfg at the bottom to call the Namalsk mission file?

You must be logged in to vote

1 reply

OK, installed the server and its working. Did not test via client as i’m still in bed LUL.
Here is what i did:

Created a new user
Installed via ./dayzserver install
Downloaded Namalsk Island via steamcmd: workshop_download_item 221100 2289456201
Downloaded Namalsk Survival via steamcmd: workshop_download_item 221100 2289461232
Moved Namalsk Island to serverfiles: mv /home/namalsk/.local/share/Steam/steamapps/workshop/content/221100/2289456201 serverfiles/
Moved Namalsk Survival to serverfiles: mv /home/namalsk/.local/share/Steam/steamapps/workshop/content/221100/2289461232 serverfiles/
Renamed containing files and folders in both mod folders to lower case: rename ‘y/A-Z/a-z/’ *
moved keys from Namlask files to serverfiles/keys directory
moved mpmission directory from 2289461232/extras/regular to serverfiles/mpmissions
edited serverfiles/cfg/dayzserver.server.cfg at the bottom to load correct namalsk mission file:

// Mission to load on server startup. <MissionName>.<TerrainName>
class Missions
{
    class DayZ
    {
        template="regular.namalsk";
    };
};

Edited /home/namalsk/lgsm/config-lgsm/dayzserver/dayzserver.cfg to following content:

##################################
####### Instance Settings ########
##################################
# PLACE INSTANCE SETTINGS HERE
## These settings will apply to a specific instance.
mods="2289456201';'2289461232"

Let me know if this helps.

Thank you so much for your detailed description and your patience. I simply did not know I have to move the mission files to mpmission folder, I assumed it would read it from the mod folder directly.

Moving namalsk to the mpmission folder solved all remaining problems, all seems to be working prefectly now.

You must be logged in to vote

1 reply

Great! No problem, hosting DayZ can be painful if you are new to it. If you have any questions feel free to ask.

Every time I try to spawn in an asset, I get this error message. Do you have any insight into what might be causing this?

Camera speed & favourites are not saving for me when closing the editor. I was not able to find any way to save a favourite file or anything. I believe this is a bug!

Note: Wondering if we can get a hot key to lock props along its vertical axis, so once you find the correct Y position, you can still move it without it snapping to something! Maybe there is a feedback forum for this, thanks~

Saving a File with the Letter «M» in the name will open the map while putting in file name

The dayz editor says «no world map found for Deerisle» and crashes. If i load the deerisle mod it hangs on the splash screen while loading. I have re installed dayz and unsubed all mods, re subed to editor and dependencies. Still gives same result. I have tried rolling back graphics driver several versions, no effect. Dayz runs fine. Steam cloud save is turned off.
Any help would be great, its an amazing bit of kit when its working.

RoyBeer

Game crashed twice now when I tried using DEL to manipulate, I think, the X position.

It started when I had the delete circle bloomed out to around 85. It would delete maybe 20 trees then lock up. I hade to CTRL ALT Delete then task manager to close it. Then I thoought it was too much so started deleting trees with the default size 1 at a tome, after maybe 20 trees it would freeze again, again having to force close ats the program was locked solid
DayZReport_Log_20220514T171344_alask.zip
.

Dart4g

Selection bug
Sometimes when you select several objects, other objects that are far away may be selected.
Different other objects are always selected.
Sometimes everything is chosen correctly. Sometimes not.

I don’t know why this is happening. But this is wrong.

I’m adding a video of this bug
https://www.youtube.com/watch?v=FRvBlb6fwYc
If you want, I can add a video to the file sharing service

RoyBeer

Spawn in LargeTent or PartyTent

Press [Home] to enter Charakter

Move towards spawned tent and pick it up, then place it anywhere nearby

Your character will move up slightly after successfully pitching the tent

Afterwards pressing [TAB] does not open the inventory anymore

RoyBeer

Hi Guys,

Trying to setup some Traders. When spawning buildings and ect, have no problem moving them.
But if I spawn a survivor_eva or any other survivor I can’t click on them to make them move so I can put them in place

Thanks

Any time I try and spawn anything at all It gives an error? Must be something I have done but server is vanilla with just dayz editor, dabs framewrok, CF and Dayz editor loader?

Invalid Entity from Dam Concrete 20 Floodgate
Invalid Entity from Dam Concrete 20 Floodgate
Invalid Entity from Dam Concrete 20 Floodgate
Invalid Entity from Dam Concrete Floodgate
Invalid Entity from Dam Concrete 20 Floodgate
EditorWorld Obiect: Invalid Object Dam Concrete 20 Floodgate
Invalid Entity from Land House Block 1F3
Invalid Entity from Land House Block 173
Invalid Entity Land House Block 1F3
Invalid Entity from Land House Block 173
Invalid Entity from Land House Block 153
Invalid Entity from Land House Block 173
Invalid Entity from Land House Black 1F3.
Invalid Entity from Land House Block 173
Invalid Entity from Land House Block 1F3
Invalid Entity from Land House Black 1F3
Invalid Entity from Land House Block 173
Paste Error: JSON ERROR:
Invalid value.
Invalid Entity From Land House Block 173
dice
EditorWorld object invalid object Land HouseBlock 153
+
Paste Error: JSON ERROR:
Invalid value.
Paste Error: JSON ERROR: :

zeroy99

With Beta 1.21 on launch — pressing Ignore still loads Editor

mikeyxb

Clutter cutter crashes game on use

After placing several objects down and positioning/rotating them to the correct location, I exported the configuration to events file, which gave me positions but the angles are all set to 180. Seems like a bug, so am filing it here.

PS. Thanks for this awesome tool.
<3

Full exported events file:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<events>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="5637.46" y="255.142" z="9210.54" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="6816.31" y="286.772" z="9382.78" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="7430.81" y="220.383" z="8848.6" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="8111.02" y="228.692" z="8663.38" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="8611.1" y="240.175" z="8334.58" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9997.76" y="141.673" z="7846.17" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="10548.4" y="108.455" z="7739.97" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="11657.5" y="82.6484" z="7990.82" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="11828.1" y="85.0963" z="8378.52" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="8926.87" y="226.585" z="8047.37" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9212.08" y="211.981" z="7671.3" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="8825.91" y="126.521" z="6553.4" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9220.67" y="124.424" z="6539.12" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9583.21" y="103.358" z="6272.52" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9978.48" y="92.6529" z="6113.57" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="11483.6" y="92.6396" z="5317.57" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="11569.4" y="138.306" z="6302.39" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="11312.6" y="99.5656" z="7102.35" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="10163.2" y="103.863" z="9541.66" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="9731.96" y="245.479" z="8746.97" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="6859.18" y="94.3458" z="5972.66" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="4862.81" y="172.121" z="7854.76" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="5294.07" y="206.229" z="8176.94" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="5156.48" y="146.484" z="7200.18" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="6214.91" y="197.008" z="6664.08" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="5618.84" y="130.769" z="6870.96" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="6216.67" y="124.214" z="6323.2" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="6478.28" y="125.883" z="4800.74" a="180"/>
	</event>
	<event name="Land_Wreck_Caravan_MGreen">
		<pos x="8141.92" y="83.3431" z="5104.58" a="180"/>
	</event>
</events>

In editor if you type «tent» and see what is in the list, at top of the list there is horrible lag when moving cursor over the list. This problem been there long.

World markers can be clicked / interacted with through dialog boxes

as title says when going into free cam it keeps going black and i cannot do anything

I worked pretty stable a month ago. Now it crashes. I load an empty map, place a couple of objects. Crash.

Log:

NULL pointer to instance
Class: ‘DayZIntroScenePC’
Function: ‘ResetIntroCamera’
Stack trace:
scripts/5_Mission/dayzintroscene.c:125
scripts/5_Mission/guinewuimainmenumainmenu.c:82
DayZEditor/scripts/5_Mission/dayzeditormainmenu.c:8

Runtime mode
CLI params: name Znahar mod C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@BuilderItems;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@CF;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@DayZ-Editor
NULL pointer to instance
Class: ‘Editor’
Function: ‘LoadBanData’
Stack trace:
DayZEditor/scripts/4_World/dayzeditorclasseseditor.c:1005
DayZEditor/scripts/4_World/dayzeditorclasseseditor.c:88
DayZEditor/scripts/4_World/dayzeditorclasseseditor.c:145
DayZEditor/scripts/4_World/dayzeditormoduleseditorclient.c:74
JM/CF/Scripts/4_World/communityframeworkmodulejmmodulemanager.c:113
JM/CF/Scripts/5_Mission/communityframeworkmissionmissiongameplay.c:24

Runtime mode
CLI params: name Znahar mod C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@BuilderItems;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@CF;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@DayZ-Editor
NULL pointer to instance
Class: ‘DayZIntroScenePC’
Function: ‘ResetIntroCamera’
Stack trace:
scripts/5_Mission/dayzintroscene.c:125
scripts/5_Mission/guinewuimainmenumainmenu.c:82
DayZEditor/scripts/5_Mission/dayzeditormainmenu.c:8

Runtime mode
CLI params: name Znahar mod C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@BuilderItems;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@CF;C:Program Files (x86)SteamsteamappscommonDayZ!Workshop@DayZ-Editor

Recommend Projects

React

A declarative, efficient, and flexible JavaScript library for building user interfaces.
Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
TensorFlow

An Open Source Machine Learning Framework for Everyone
Django

The Web framework for perfectionists with deadlines.
Laravel

A PHP framework for web artisans
D3

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
web

Some thing interesting about web. New door for the world.
server

A server is a program made to process requests and deliver data to clients.
Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Visualization

Some thing interesting about visualization, use data art
Game

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft

Open source projects and samples from Microsoft.
Google

Google ❤️ Open Source for everyone.
Alibaba

Alibaba Open Source for everyone
D3

Data-Driven Documents codes.
Tencent

China tencent open source team.

Источник

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Pick a username

Email Address

Password

By clicking “Sign up for GitHub”, you agree to our terms of service and
privacy statement. We’ll occasionally send you account related emails.

Already on GitHub?
Sign in
to your account

Источник

Здравствуйте товарищи комрады, сразу скажу я нубовский новичёк, но поиском пользоваться вроде умею 😃

Возникли проблемы с установкой карты Deerisle на свой сервер (он же мой старый добрый ПеКа)

Что сделал? закинул папку с модовой картой в папку с сервером (я знаю что процедура не обязательная и что можно как то прописать путь к моду, но это будет одна из следующих задач 😃 ),

скопировал ключ (да с сайта тоже качал, по моему это одно и тоже) В «serverDZ.cfg» поменял строчку на (template=»dayzOffline.deerisle») Закинул в папку «mpmissions» папку «empty.deerisle» переименовал её в «dayzOffline.deerisle» ну и конечно же сделал пометку в «BATнике».

столкнулся вот с такой ошибкой. что делал? перекачивал всё заново, 4 раза мод с картой и 1 раз сносил вообще всё (игру, сервер и все моды) чистил кэш, установил всё поновой.

Пробовал удалять этот «PBO » (ну так чисто ради эксперемента 😃 ) вылезает другая ошибка с «PBO» такистан.

заранее извеняюсь за столь тупой вопрос, но гайдов на великом и могучем где было бы написано сделай вот так и так и будет тебе счастье, я просто не нашёл.

Please Log in or Register to see this: Spoiler

Источник

GhostGamer — 15.10.2021 11:22

I hope they add this to console, because this looks really good!!

Ответить

Pavol Nemec — 16.10.2021 19:11

i am looking for answers just to be safe and clear of any sanctions or whatever. thing is 2 weeks ago i bought my server on pingperfect and i would like to mod the map through dayz editor but i am not sure if i can..if it isnt violating map owner rules. i just wanna to do my custom trader location + layout and some other thing like camps….
basically on creators site there is line :
,,You are allowed to ADD custom content via 3rd party Mods/Tools on the map for your private server.,,

but what about public servers. My server is now WIP but i am going to release it to public when its ready. Do u guys know if i am allowed to do it

Ответить

soniferous — 19.10.2021 14:37

Hello Scalespeeder, thank you for your great contribute to the community.
Do you by any chance know how/where to adjust the time that the temple teleport/altar is active?

Ответить

SurvivorZ -DayZ — 03.12.2021 20:37

Hey man great video. I have established a local server on my pc using your guide. I have now the chernarus plus map. I dont want to delete it. is it possible to run both maps on the same LAN server with different start parameters?

Ответить

AD — 19.02.2022 23:23

i dont have start-zomberry-admin file what can i do?

Ответить

Binlee

Binlee — 03.04.2022 00:18

what do i do if it fails to upload? im stuck using the gtx servers

Ответить

slayercommathe — 15.08.2022 12:18

Thank you for all your videos, they really helped me set up a local server to test out mods. I’m having a problem with this one though. The missions download is just one file «empty.deerisle.rar» No sub folders or anything, consequently the server won’t run. Any ideas?

Ответить

Gauge D

Gauge D — 20.08.2022 19:12

so i dont have a extract option when i right click?can u please help thank you.

Ответить

Reaper 0311 — 27.08.2022 09:12

Hey man, I am stumped, it tells me I am missing Takistan PBO when its already inside the file. Could you help me out or do a updated tutorial?

Ответить

Sgt_Hest — 13.09.2022 10:34

As soon as I add mod=@DeerIsle to the startup line, the server isn’t showing up anymore. Any idear what to check? Have followed these guides several times now and double checked

Ответить

Darkwing (Tate) — 25.09.2022 04:30

Legend 🙏

Ответить

JC — 28.09.2022 19:59

Hello. I downloaded the mission file, but its empty. The rar file is all I get. Any suggestions? Thanks

Ответить

SnackPack — 13.11.2022 07:26

it works fine but ingame when i press m the map doesnt show

Ответить

Matt Dunlavey — 21.11.2022 03:43

I have been using your tutorials a lot for DayZ and they are very helpful. I loaded DeerIsle today but keep getting an error when I start the server «no world with name deerisle» Any idea what I may be doing wrong?

Ответить

Feelty

Feelty — 21.12.2022 03:20

HI when I entered the game it kicked me out becuase of an error of data pob how can i fix it ???

Ответить

Bismallahishowspeedsewey — 29.12.2022 22:26

So much steps to play wtf… I don’t even have day z server folder or mpmissions folder 😑😑😑😑😑

Ответить

Bismallahishowspeedsewey — 30.12.2022 09:45

Regret getting this fucking game can’t even play it is there a step by step tutorial on how to install and play this

Ответить

Allen Kemmett — 30.12.2022 18:37

You are a legend sir, only thing i would recommend from my own failures in the past is to only install one mod at a time and not tie yourself in knots with doing 10 at once 😂

Ответить

BerdyevCreations — 11.01.2023 05:13

Thank you so much!

Ответить

Aythaminho — 20.01.2023 19:52

what if i don´t have the DayZserver file? I´m trying to play new maps…

Ответить

Oliver Klozov — 23.02.2023 04:46

We followed this tutorial to the letter for a local dedicated server and kept getting a message saying something to the effect «no world deer isle».
Are there other dependency mods necessary to run these maps?

Ответить

iLeeTek

iLeeTek — 08.03.2023 02:52

no world with name ‘deerisle’

Ответить

Klex

Klex — 24.04.2023 23:30

If you have an issue with «no world named deerisle», you need to specify the mods as a string like this: «-mods=@deerisle;» — you can’t do -mods=»@deerisle;»

Ответить

o TGF Erving 6 — 20.05.2023 20:38

i have no dayz server? where is it?

Ответить

Robert Clark — 16.07.2023 12:52

The install has changed a little for DeerIsle this could use an update, they have added a deerisle_ce folder so now there are 2 folders to download and proper placement for the new one would also be helpful. Keep up the great work and try not to let it overwhelm the fun times.

Ответить

Random Stranger On The Internet — 03.08.2023 10:08

how did you get a dayz server folder , I only have a Dayz folder.

Ответить

Tema Anisimov — 06.08.2023 00:05

Спасибо тебе огромное, ты очень помог, ты лучший!!!!

Ответить

FORWE AREKINGS — 14.08.2023 14:24

Any new guides for installing this ? I don’t have some of the folders suggested., any help would awesome

Ответить

Anita Haenel — 23.08.2023 21:35

it downloads as a rar file

Ответить

Источник

The issue

What I have done so far

Recommend Projects

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://www.typescriptlang.org/favicon-32x32.png" alt="Typescript photo" /> Typescript

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars2.githubusercontent.com/u/27804?s=200&amp;v=4" alt="Django photo" /> Django

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://laravel.com/img/logomark.min.svg" alt="Laravel photo" /> Laravel

Recommend Topics

javascript

web

server

Machine learning

Visualization

Game

Recommend Org

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars.githubusercontent.com/u/6154722?v=4" alt="Microsoft photo" /> Microsoft

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars.githubusercontent.com/u/1342004?v=4" alt="Google photo" /> Google

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars.githubusercontent.com/u/1961952?v=4" alt="Alibaba photo" /> Alibaba

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars.githubusercontent.com/u/1562726?v=4" alt="D3 photo" /> D3

<img decoding="async" onError="javascript: wp_broken_images = window.wp_broken_images || function(){}; wp_broken_images(this);" loading="lazy" width="24" height="24" src="https://avatars.githubusercontent.com/u/18461506?v=4" alt="Tencent photo" /> Tencent

Typescript

Django

Laravel

Microsoft

Google

Alibaba

D3

Tencent