No result produced ошибка 3dmark

Автор Сообщение
 

СообщениеДобавлено: 03.08.2016 20:26 

[профиль] [Фотоальбом]

Member

Статус: Не в сети
Регистрация: 06.06.2007
Откуда: Ниоткуда
Фото: 53

miwa писал(а):

удалешь его, чистишь реестр от всего мусора, чистишь папку с марком в моих документах-перезагрузка и устанавливаешь -желательно на другой диск или раздел

Спасибо! Помогла установка на другой раздел!


_________________
9900KF 5.0GHz/1.30V☻MAXIMUS XI HERO☻32GB DDR4 3700MHz/16-18-18-36 CR1/1.40V☻RTX 3080 Ti AORUS XTREME☻2TB XPG S11 Pro☻Corsair AX860☻LG 32GK850G

Реклама

Партнер
 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

не создаю новую тему,дабы название попадает под мой запрос

У меня в тесте time spy какие-то графические артефакты вылезли, в демке все OK, а в самих графических тестах 1, 2 появляется то, что я показал на скринах. У меня GTX680-DC2G-4GD5, и до этого теста ничего подобного я не замечал, да собственно и не замечаю, только в этом тесте подобное. В той же forza motorsport 6, все хорошо, а она судя по всему dx12. Что это может быть?

screenshots:

https://goo.gl/photos/tNHrPubCYogziAwu6

https://goo.gl/photos/PgwWnXFEX6XyHMC47

https://goo.gl/photos/xbTVmPDo4YsFzTYP9

https://goo.gl/photos/UX3iM4NQH5YETu5D7

https://goo.gl/photos/aMUuMY2geiswwR8GA

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

Что это может быть?

отвал

 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

carsar1 писал(а):

отвал

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

ну если карта не на гарантии, то лучше верить в это.
если на гарантии -можно попробовать и сдать. все-таки больше похоже на начало отвала(может прожить еще пол года год после таких артов. потом после прогрева еще пол года).

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

ALFik писал(а):

Member
цитировать

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб
Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

смотря что написано в невалидной оценке. скрин нужен

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Ничего не менял, но сегодня все нормально. Странно. Пока отбой. :)

 
Klaud07

Member

Статус: Не в сети
Регистрация: 25.07.2016

Подскажите программу что-то типа 3DMarka, запускается ролик, в углу отображается температура и еще какие-то параметры. Продолжительность минуты 3-4. Удалил с винта теперь найти не могу… :oops:

 
ГСК17

Заблокирован
Заблокирован

Статус: Не в сети
Регистрация: 03.05.2013

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается


_________________
Faith, you’re driving me away
You do it everyday
You don’t mean it
But it hurts like hell

 
Remarc

Advanced member

Статус: Не в сети
Регистрация: 30.04.2013
Откуда: Москва
Фото: 0

ГСК17 писал(а):

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается

open AL входит в инсталлятор 3дм06 либо у тебя старая версия либо битая…с офсайта качал?


_________________
AM4 R7 1700X=4500Mhz,R5 2500X=4650Mhz,R7 2700X=4711Mhz,R7 3800X=4900Mhz
AM3 FX-8300=5700Mhz
FM2 A4-5300=5508Mhz,A10-7860k=5350Mhz

 
ferrumio

Member

Статус: Не в сети
Регистрация: 17.05.2014
Фото: 28

почему тесты могут не завершаться? постоянно выходит ошибка что нет результата или тест прерван пользователем. версия репак 3DMark 2.6.6174 Professional

 
desdechado

Member

Статус: Не в сети
Регистрация: 04.10.2006
Откуда: Архангельск
Фото: 246

Зависают 2003/2005/2005 марки в тестах перестрелки на космическом корабле. Кто что посоветует, кроме как забить на это старье?


_________________
Ryzen 5-5600/Gigabyte b450 auros m/64GB/RX580 8Gb/SSD 500Gb+HDD 1Tb/DEEPCOOL AG500/BeQuiet PP L8 630W /Zalman-R1/Acer 23.6

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2

Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Лаборатория

Новости

Автор Сообщение
 

СообщениеДобавлено: 03.08.2016 20:26 

[профиль] [Фотоальбом]

Member

Статус: Не в сети
Регистрация: 06.06.2007
Откуда: Ниоткуда
Фото: 53

miwa писал(а):

удалешь его, чистишь реестр от всего мусора, чистишь папку с марком в моих документах-перезагрузка и устанавливаешь -желательно на другой диск или раздел

Спасибо! Помогла установка на другой раздел!


_________________
9900KF 5.0GHz/1.30V☻MAXIMUS XI HERO☻32GB DDR4 3800MHz/16-18-18-37 CR1/1.43V☻RTX 3080 Ti AORUS XTREME☻2TB XPG S11 Pro☻Corsair AX860☻LG 32GK850G

Реклама

Партнер
 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

не создаю новую тему,дабы название попадает под мой запрос

У меня в тесте time spy какие-то графические артефакты вылезли, в демке все OK, а в самих графических тестах 1, 2 появляется то, что я показал на скринах. У меня GTX680-DC2G-4GD5, и до этого теста ничего подобного я не замечал, да собственно и не замечаю, только в этом тесте подобное. В той же forza motorsport 6, все хорошо, а она судя по всему dx12. Что это может быть?

screenshots:

https://goo.gl/photos/tNHrPubCYogziAwu6

https://goo.gl/photos/PgwWnXFEX6XyHMC47

https://goo.gl/photos/xbTVmPDo4YsFzTYP9

https://goo.gl/photos/UX3iM4NQH5YETu5D7

https://goo.gl/photos/aMUuMY2geiswwR8GA

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

Что это может быть?

отвал

 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

carsar1 писал(а):

отвал

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

ну если карта не на гарантии, то лучше верить в это.
если на гарантии -можно попробовать и сдать. все-таки больше похоже на начало отвала(может прожить еще пол года год после таких артов. потом после прогрева еще пол года).

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

ALFik писал(а):

Member
цитировать

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб
Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

смотря что написано в невалидной оценке. скрин нужен

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Ничего не менял, но сегодня все нормально. Странно. Пока отбой. :)

 
Klaud07

Member

Статус: Не в сети
Регистрация: 25.07.2016

Подскажите программу что-то типа 3DMarka, запускается ролик, в углу отображается температура и еще какие-то параметры. Продолжительность минуты 3-4. Удалил с винта теперь найти не могу… :oops:

 
ГСК17

Заблокирован
Заблокирован

Статус: Не в сети
Регистрация: 03.05.2013

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается


_________________
Faith, you’re driving me away
You do it everyday
You don’t mean it
But it hurts like hell

 
Remarc

Advanced member

Статус: Не в сети
Регистрация: 30.04.2013
Откуда: Москва
Фото: 0

ГСК17 писал(а):

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается

open AL входит в инсталлятор 3дм06 либо у тебя старая версия либо битая…с офсайта качал?


_________________
AM4 R7 1700X=4500Mhz,R5 2500X=4650Mhz,R7 2700X=4711Mhz,R7 3800X=4900Mhz
AM3 FX-8300=5700Mhz
FM2 A4-5300=5508Mhz,A10-7860k=5350Mhz

 
ferrumio

Member

Статус: Не в сети
Регистрация: 17.05.2014
Фото: 28

почему тесты могут не завершаться? постоянно выходит ошибка что нет результата или тест прерван пользователем. версия репак 3DMark 2.6.6174 Professional

 
desdechado

Member

Статус: Не в сети
Регистрация: 04.10.2006
Откуда: Архангельск
Фото: 246

Зависают 2003/2005/2005 марки в тестах перестрелки на космическом корабле. Кто что посоветует, кроме как забить на это старье?


_________________
Ryzen 5-5600/Gigabyte b450 auros m/64GB/RX580 8Gb/SSD 500Gb+HDD 1Tb/DEEPCOOL AG500/BeQuiet PP L8 630W /Zalman-R1/Acer 23.6

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 4

Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Лаборатория

Новости

MrGenius

  • #1

Ok, so today I download and install this latest version of 3DMark Basic Edition. Wasn’t expecting much. But apparently got much less?! Like nothing, nada, zip, zilch, jack squat. Cool new look and that’s it. Nothing more. Everything’s labeled «Not available» or «Advanced Edition only». You pay to play now!!! Or no benchmarks for you!!! Wait. What? Why? For real? You’re shitting me right? What’s up with that? It’s a little late for April Fools…ain’t it? Thinking I must be trippin’, I’ve been trying to figure this out for a few hours now. Searching here and there, googling this and that, getting absolutely nowhere. Is this the way it’s supposed to be now? Does this thing work for anybody not paying for it any more? Is that the point I’m missing? Am I doing something else wrong besides not clicking «BUY» or pulling an upgrade key out of my ass? Or am I just stuck in the Twilight Zone again? What’s the deal? I give up.

MrGenius

P4-630

Shou Miko

  • #4

I bought it a while ago on steam with a big discount, wait for that and buy it then.

Or: http://store.steampowered.com/app/223850/ demo.

I own the steam version too, but srsly it suxx xxxxx bcs it doesn’t work for like 75% of all it’s users even with the new update it still didn’t work for me on Widnows 10 Pro so I downloaded it here from TPU and installed it and it automaticly picked up my serial from steam even it’s not installed in the same location and it works wonderfully :laugh:

MrGenius

  • #5

I did this for now. And got the results I expected to get from the version I installed yesterday. It appears to be a working v2.0.1979 Basic Edition, with all the promised improvements. So if that’s what you want, I guess that’s the only way to get it now…for free. Or if all you want is a totally non-functional piece of shit promo for it download it from TPU. Why you would is beyond me. But apparently somebody thinks it’s a good idea. WTF ever.

EDIT: Oops. I lied. There’s no Ice Storm Unlimited. Just Ice Storm Extreme.

Last edited: Apr 16, 2016

jboydgolfer

  • #6

I use the firstrike steam demo ,it lets you use all the test, jyst not at all difficulties,and options are missing.but i ran it with 2x gtx970’s,and didnt max out the ones available…so i suppose it serves its purpose.

MrGenius

  • #7

I tried downloading the latest version(v2.0.2067) today, twice. Both times I ended up with a 2.16GB compressed (zipped) folder that was «empty»? Man…I just can’t win. :(

3DMark.PNG

jboydgolfer

  • #8

hld on, ill dl it, and see if it comes up good or Empty.

thats the same as the Steam version(judging from the pics), just install it through steam, they are both free. with what i would assume is the same functionality.

i used 7Zip and it dl’ed and unzipped fine. from the US server

Last edited: Apr 19, 2016

MrGenius

  • #9

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.

Last edited: Apr 20, 2016

  • #10

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.[/QUOTDid you buy

Did you own 3dMark 2013 before?

MrGenius

  • #11

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

This thread was probably a mistake though. I believe I’ve angered the gods again. I’d really feel better to call the case closed at this point. Like I said, I don’t want to make things worse. The Steam version works. And that’s just fine. I’d like that to stay as is. So I better just shut my mouth before they take that away from me too. And no, I’m not kidding…unfortunately.

Last edited: Apr 20, 2016

  • #12

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

so if it works in Steam then your all good?

MrGenius

  • #13

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

Caring1

  • #14

Downloading now, just because I am curious.
Edit: it comes up as blank to me too, something about blocked for security because it came from another computer.

Last edited: Apr 21, 2016

MrGenius

  • #15

In that case it should be as simple as unblocking it. But it doesn’t appear to be. Since I’d already tried that. And it didn’t work. I even tried downloading it again today and unblocking it again, thinking the issue in regards to the empty folder bit was only temporary(as discussed in your thread). Surprise surprise…no dice once more. So apparently not. Again, WTF ever. Workaround available. Yadda yadda yadda. Thanks for wasting copious amounts of my precious time. Not you if you’re wondering what I mean by that. Whoever it is that can’t get their head out of their ass and fix this fucking download so it functions correctly and stops causing all the headaches for us. Jesus fucking Christ. The dipshits at Steam seem to be able to handle it. How hard can it fucking be? IT’S NOT WORKING. PLEASE FIX IT OR TAKE IT DOWN. THANKS!!!

At least I don’t appear to have been infected with anything as a result of all this senselessness.

Last edited: Apr 23, 2016

jboydgolfer

  • #16

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

did You REALLY wait till just now to try the steam version?

MrGenius

  • #17

Oh hell no. I really did do that as soon as it was first suggested. And in the mean time since it updated itself to the latest version even. Wish I’d have done it sooner and skipped all this BS. That’s what I get for trusting TPU downloads. Which I actually still do. Since this is the only instance out of countless downloads where I’ve had any issues at all.

And yes, I broke my promise. So what? It ain’t the first time. Probably won’t be the last. Let me have it if you must. I am kidding this time though.

Last edited by a moderator: Apr 26, 2016

Shou Miko

  • #18

My winrar gave me an error for the latest version of 3DMark some days ago, so I went to Guru3d to download it and it worked from there could unpack it.

MrGenius

  • #19

Noticed there was a new 3rd US(US-3) server up today. Tried that one and it finally worked…

NOT!!!

The folder wasn’t empty at least this time. But I’m right back to the same issue with the previous version. Totally non-functional POS promo. See posts #1 and #5. Come on TPU. Get your friggen act together already for crying out loud. You’re starting to look really bad here. Don’t you think?

I’d pondered trying guru. Guess I’ll be jumping ship and doing that now. Why? Because I can. Mostly because I’ve never had to revert to a Steam demo for a free 3DMark product(all of which I’ve been using for well over a decade without issues, like every one there is). And I see no reason to be satisfied with that option now. That and having a bunch of shit that doesn’t need to be running in the background while benching is slightly counter-intuitive. Why not open a couple web browsers and defrag my disks while I’m at it?

EDIT: Same story from Guru. So SCREW YOU TOO 3DMARK!!! What’s the story with this bullshit all the sudden? Advertising one thing and giving me another? I oughta sue your asses.

Last edited by a moderator: Apr 26, 2016

  • #20

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

  • #21

I just use the demo to see if shits working ok ( DX ), other wise i think the program pretty pointless anyways.

MrGenius

  • #22

I don’t know what or why. But it’s definitely not just 2 of us. I just tried installing it on my Vista PC and it does appear to work on that one. It even suggested the Ice Storm Unlimited benchmark for it on the opening page(onboard graphics currently). But even though that’s only showed up with one Basic Edition version yet, I tried running it and got an immediate error and it refuses to run it. «Workload produced no results» score 0. What workload? Damn thing won’t even run for a second. But Ice Storm Unlimited still does not even show up on the benchmarks page with that install either(or any other so far, including the Steam demo). So that’s false advertising there period. So far as I know Ice Storm Unlimited does not actually exist. But of course you’re going to tell me that works fine for you too…right?

So, if it’s not some stupid Windows 10 thing, then I don’t know what it is. Because that’s pretty much the only relevant difference between the 2 PCs I’ve installed it on.

EDIT: The problem, as it turns out, with my Vista PC is lack of appropriate screen resolution to run the test. 1600×1200 don’t cut it.

Last edited: Apr 26, 2016

  • #23

Yeah, it works fine for me, but I have several fully paid-for «Advanced Version» copies (used in nearly every review I’ve ever done here, so I have access to both W1zzard’s copy and my own personal copies). So I can only talk about paid-for versions, since the registration info is left behind.

What I’m talking about working, though, is the downloads from our servers here on TPU. You mentioned you had issues unpacking, both from here and from Guru3D, and since we downloaded from the same sources, and mine works but yours does not, I suggest looking for the problem elsewhere in your system.

AFAIK, you only get to run 1 test on the free version.

I do test in Windows 10 exclusively these days. Posted both a motherboard and memory review in the past two weeks, respectively. I’m sorry that that doesn’t really help you any, but I can say that I’ve installed both times for those reviews on a fresh install, and just because of this thread I downloaded and installed both the .1979 and the more recent version.

Shou Miko

  • #24

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

  • #25

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

I just use the default unzip tool that Win10 offers (right-click, extract all). I no longer test using WinRAR, so I have no need to install it… yet. :p

Thanks for confirming no problems with the downloads though. ;)

Go to 3DMark

r/3DMark

This subreddit is for the submission and open discussion of scores achieved in any of the 3DMark benchmarking applications.




Online

Help Troubleshooting Failed Benchmarks

Anyone have a good tip on how to troubleshoot the root cause of a benchmark test that errors out with the generic, “Opps! An error occurred. No result produced”?

I’d like to at least know if the cause is GPU, GPU memory, CPU or RAM so I have a general direction to explore.

Maybe particular messages in Event Viewer hold the answer but I’m not sure what to look for.



10082
Views



3
Replies



2
Participants



Last post by 
looniam, 
Jun 25, 2016

denman

So, I purchased 3DMark today since it was $4.99 on sale through the Steam Sale, but ever time I try to run a benchmark, I get:
Quote:

Oops! An error occurred.
Workload produced no results

I tried looking over their support page, but it makes zero mention of this error at all.

looniam

denman

Exact same error when I run Fire Strike or Fire Strike Ultra, but it runs the full 3:30 benchmark

See less

See more




1

looniam

it just might be the system info program. if you used my earlier advice; make sure to delete the steam version — forgot to mention that.

go to task manger and kill the systeminfo process, then try running it again.

maybe @Jpmboy would have better advise.

This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.

Автор Сообщение
 

СообщениеДобавлено: 03.08.2016 20:26 

[профиль] [Фотоальбом]

Member

Статус: Не в сети
Регистрация: 06.06.2007
Откуда: Ниоткуда
Фото: 53

miwa писал(а):

удалешь его, чистишь реестр от всего мусора, чистишь папку с марком в моих документах-перезагрузка и устанавливаешь -желательно на другой диск или раздел

Спасибо! Помогла установка на другой раздел!


_________________
9900KF 5.0GHz/1.30V☻MAXIMUS XI HERO☻32GB DDR4 3800MHz/16-18-18-37 CR1/1.43V☻RTX 3080 Ti AORUS XTREME☻2TB XPG S11 Pro☻Corsair AX860☻LG 32GK850G

Реклама

Партнер
 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

не создаю новую тему,дабы название попадает под мой запрос

У меня в тесте time spy какие-то графические артефакты вылезли, в демке все OK, а в самих графических тестах 1, 2 появляется то, что я показал на скринах. У меня GTX680-DC2G-4GD5, и до этого теста ничего подобного я не замечал, да собственно и не замечаю, только в этом тесте подобное. В той же forza motorsport 6, все хорошо, а она судя по всему dx12. Что это может быть?

screenshots:

https://goo.gl/photos/tNHrPubCYogziAwu6

https://goo.gl/photos/PgwWnXFEX6XyHMC47

https://goo.gl/photos/xbTVmPDo4YsFzTYP9

https://goo.gl/photos/UX3iM4NQH5YETu5D7

https://goo.gl/photos/aMUuMY2geiswwR8GA

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

Что это может быть?

отвал

 
SiberianPult

Junior

Статус: Не в сети
Регистрация: 01.12.2011

carsar1 писал(а):

отвал

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

SiberianPult писал(а):

как показал ряд экспериментов,такая бяка начинается на разрешении 4к
на сайте 3дмарка мне и вовсе ответили,что это баг драйвера нвидии

ну если карта не на гарантии, то лучше верить в это.
если на гарантии -можно попробовать и сдать. все-таки больше похоже на начало отвала(может прожить еще пол года год после таких артов. потом после прогрева еще пол года).

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

 
carsar1

Member

Статус: Не в сети
Регистрация: 03.12.2008

ALFik писал(а):

Member
цитировать

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб
Как получить валидную оценку? Настройки стоят по умолчанию. Версия официальная со стима, w7/64bit.

смотря что написано в невалидной оценке. скрин нужен

 
ALFik

Member

Статус: Не в сети
Регистрация: 09.03.2008
Откуда: Екб

Ничего не менял, но сегодня все нормально. Странно. Пока отбой. :)

 
Klaud07

Member

Статус: Не в сети
Регистрация: 25.07.2016

Подскажите программу что-то типа 3DMarka, запускается ролик, в углу отображается температура и еще какие-то параметры. Продолжительность минуты 3-4. Удалил с винта теперь найти не могу… :oops:

 
ГСК17

Заблокирован
Заблокирован

Статус: Не в сети
Регистрация: 03.05.2013

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается


_________________
Faith, you’re driving me away
You do it everyday
You don’t mean it
But it hurts like hell

 
Remarc

Advanced member

Статус: Не в сети
Регистрация: 30.04.2013
Откуда: Москва
Фото: 0

ГСК17 писал(а):

а у меня чет 06-й не запускается на десятке . ЧТо-то опенал требует , длл , ну скачал , насувал в винду и прогу , не помогло , экзешник-инсталлер этого опенала не запускается

open AL входит в инсталлятор 3дм06 либо у тебя старая версия либо битая…с офсайта качал?


_________________
AM4 R7 1700X=4500Mhz,R5 2500X=4650Mhz,R7 2700X=4711Mhz,R7 3800X=4900Mhz
AM3 FX-8300=5700Mhz
FM2 A4-5300=5508Mhz,A10-7860k=5350Mhz

 
ferrumio

Member

Статус: Не в сети
Регистрация: 17.05.2014
Фото: 28

почему тесты могут не завершаться? постоянно выходит ошибка что нет результата или тест прерван пользователем. версия репак 3DMark 2.6.6174 Professional

 
desdechado

Member

Статус: Не в сети
Регистрация: 04.10.2006
Откуда: Архангельск
Фото: 246

Зависают 2003/2005/2005 марки в тестах перестрелки на космическом корабле. Кто что посоветует, кроме как забить на это старье?


_________________
Ryzen 5-5600/Gigabyte b450 auros m/64GB/RX580 8Gb/SSD 500Gb+HDD 1Tb/DEEPCOOL AG500/BeQuiet PP L8 630W /Zalman-R1/Acer 23.6

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 2

Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Лаборатория

Новости

MrGenius

  • #1

Ok, so today I download and install this latest version of 3DMark Basic Edition. Wasn’t expecting much. But apparently got much less?! Like nothing, nada, zip, zilch, jack squat. Cool new look and that’s it. Nothing more. Everything’s labeled «Not available» or «Advanced Edition only». You pay to play now!!! Or no benchmarks for you!!! Wait. What? Why? For real? You’re shitting me right? What’s up with that? It’s a little late for April Fools…ain’t it? Thinking I must be trippin’, I’ve been trying to figure this out for a few hours now. Searching here and there, googling this and that, getting absolutely nowhere. Is this the way it’s supposed to be now? Does this thing work for anybody not paying for it any more? Is that the point I’m missing? Am I doing something else wrong besides not clicking «BUY» or pulling an upgrade key out of my ass? Or am I just stuck in the Twilight Zone again? What’s the deal? I give up.

MrGenius

P4-630

Shou Miko

  • #4

I bought it a while ago on steam with a big discount, wait for that and buy it then.

Or: http://store.steampowered.com/app/223850/ demo.

I own the steam version too, but srsly it suxx xxxxx bcs it doesn’t work for like 75% of all it’s users even with the new update it still didn’t work for me on Widnows 10 Pro so I downloaded it here from TPU and installed it and it automaticly picked up my serial from steam even it’s not installed in the same location and it works wonderfully :laugh:

MrGenius

  • #5

I did this for now. And got the results I expected to get from the version I installed yesterday. It appears to be a working v2.0.1979 Basic Edition, with all the promised improvements. So if that’s what you want, I guess that’s the only way to get it now…for free. Or if all you want is a totally non-functional piece of shit promo for it download it from TPU. Why you would is beyond me. But apparently somebody thinks it’s a good idea. WTF ever.

EDIT: Oops. I lied. There’s no Ice Storm Unlimited. Just Ice Storm Extreme.

Last edited: Apr 16, 2016

jboydgolfer

  • #6

I use the firstrike steam demo ,it lets you use all the test, jyst not at all difficulties,and options are missing.but i ran it with 2x gtx970’s,and didnt max out the ones available…so i suppose it serves its purpose.

MrGenius

  • #7

I tried downloading the latest version(v2.0.2067) today, twice. Both times I ended up with a 2.16GB compressed (zipped) folder that was «empty»? Man…I just can’t win. :(

3DMark.PNG

jboydgolfer

  • #8

hld on, ill dl it, and see if it comes up good or Empty.

thats the same as the Steam version(judging from the pics), just install it through steam, they are both free. with what i would assume is the same functionality.

i used 7Zip and it dl’ed and unzipped fine. from the US server

Last edited: Apr 19, 2016

MrGenius

  • #9

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.

Last edited: Apr 20, 2016

  • #10

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.[/QUOTDid you buy

Did you own 3dMark 2013 before?

MrGenius

  • #11

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

This thread was probably a mistake though. I believe I’ve angered the gods again. I’d really feel better to call the case closed at this point. Like I said, I don’t want to make things worse. The Steam version works. And that’s just fine. I’d like that to stay as is. So I better just shut my mouth before they take that away from me too. And no, I’m not kidding…unfortunately.

Last edited: Apr 20, 2016

  • #12

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

so if it works in Steam then your all good?

MrGenius

  • #13

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

Caring1

  • #14

Downloading now, just because I am curious.
Edit: it comes up as blank to me too, something about blocked for security because it came from another computer.

Last edited: Apr 21, 2016

MrGenius

  • #15

In that case it should be as simple as unblocking it. But it doesn’t appear to be. Since I’d already tried that. And it didn’t work. I even tried downloading it again today and unblocking it again, thinking the issue in regards to the empty folder bit was only temporary(as discussed in your thread). Surprise surprise…no dice once more. So apparently not. Again, WTF ever. Workaround available. Yadda yadda yadda. Thanks for wasting copious amounts of my precious time. Not you if you’re wondering what I mean by that. Whoever it is that can’t get their head out of their ass and fix this fucking download so it functions correctly and stops causing all the headaches for us. Jesus fucking Christ. The dipshits at Steam seem to be able to handle it. How hard can it fucking be? IT’S NOT WORKING. PLEASE FIX IT OR TAKE IT DOWN. THANKS!!!

At least I don’t appear to have been infected with anything as a result of all this senselessness.

Last edited: Apr 23, 2016

jboydgolfer

  • #16

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

did You REALLY wait till just now to try the steam version?

MrGenius

  • #17

Oh hell no. I really did do that as soon as it was first suggested. And in the mean time since it updated itself to the latest version even. Wish I’d have done it sooner and skipped all this BS. That’s what I get for trusting TPU downloads. Which I actually still do. Since this is the only instance out of countless downloads where I’ve had any issues at all.

And yes, I broke my promise. So what? It ain’t the first time. Probably won’t be the last. Let me have it if you must. I am kidding this time though.

Last edited by a moderator: Apr 26, 2016

Shou Miko

  • #18

My winrar gave me an error for the latest version of 3DMark some days ago, so I went to Guru3d to download it and it worked from there could unpack it.

MrGenius

  • #19

Noticed there was a new 3rd US(US-3) server up today. Tried that one and it finally worked…

NOT!!!

The folder wasn’t empty at least this time. But I’m right back to the same issue with the previous version. Totally non-functional POS promo. See posts #1 and #5. Come on TPU. Get your friggen act together already for crying out loud. You’re starting to look really bad here. Don’t you think?

I’d pondered trying guru. Guess I’ll be jumping ship and doing that now. Why? Because I can. Mostly because I’ve never had to revert to a Steam demo for a free 3DMark product(all of which I’ve been using for well over a decade without issues, like every one there is). And I see no reason to be satisfied with that option now. That and having a bunch of shit that doesn’t need to be running in the background while benching is slightly counter-intuitive. Why not open a couple web browsers and defrag my disks while I’m at it?

EDIT: Same story from Guru. So SCREW YOU TOO 3DMARK!!! What’s the story with this bullshit all the sudden? Advertising one thing and giving me another? I oughta sue your asses.

Last edited by a moderator: Apr 26, 2016

  • #20

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

  • #21

I just use the demo to see if shits working ok ( DX ), other wise i think the program pretty pointless anyways.

MrGenius

  • #22

I don’t know what or why. But it’s definitely not just 2 of us. I just tried installing it on my Vista PC and it does appear to work on that one. It even suggested the Ice Storm Unlimited benchmark for it on the opening page(onboard graphics currently). But even though that’s only showed up with one Basic Edition version yet, I tried running it and got an immediate error and it refuses to run it. «Workload produced no results» score 0. What workload? Damn thing won’t even run for a second. But Ice Storm Unlimited still does not even show up on the benchmarks page with that install either(or any other so far, including the Steam demo). So that’s false advertising there period. So far as I know Ice Storm Unlimited does not actually exist. But of course you’re going to tell me that works fine for you too…right?

So, if it’s not some stupid Windows 10 thing, then I don’t know what it is. Because that’s pretty much the only relevant difference between the 2 PCs I’ve installed it on.

EDIT: The problem, as it turns out, with my Vista PC is lack of appropriate screen resolution to run the test. 1600×1200 don’t cut it.

Last edited: Apr 26, 2016

  • #23

Yeah, it works fine for me, but I have several fully paid-for «Advanced Version» copies (used in nearly every review I’ve ever done here, so I have access to both W1zzard’s copy and my own personal copies). So I can only talk about paid-for versions, since the registration info is left behind.

What I’m talking about working, though, is the downloads from our servers here on TPU. You mentioned you had issues unpacking, both from here and from Guru3D, and since we downloaded from the same sources, and mine works but yours does not, I suggest looking for the problem elsewhere in your system.

AFAIK, you only get to run 1 test on the free version.

I do test in Windows 10 exclusively these days. Posted both a motherboard and memory review in the past two weeks, respectively. I’m sorry that that doesn’t really help you any, but I can say that I’ve installed both times for those reviews on a fresh install, and just because of this thread I downloaded and installed both the .1979 and the more recent version.

Shou Miko

  • #24

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

  • #25

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

I just use the default unzip tool that Win10 offers (right-click, extract all). I no longer test using WinRAR, so I have no need to install it… yet. :p

Thanks for confirming no problems with the downloads though. ;)

1

Posted by3 years ago

Anyone have a good tip on how to troubleshoot the root cause of a benchmark test that errors out with the generic, “Opps! An error occurred. No result produced”?

I’d like to at least know if the cause is GPU, GPU memory, CPU or RAM so I have a general direction to explore.

Maybe particular messages in Event Viewer hold the answer but I’m not sure what to look for.

no comments yet

Be the first to share what you think!

denman

Joined Feb 21, 2013

·

842 Posts


Discussion Starter
·

#1

·

Jun 24, 2016

So, I purchased 3DMark today since it was $4.99 on sale through the Steam Sale, but ever time I try to run a benchmark, I get:
Quote:

Oops! An error occurred.
Workload produced no results

I tried looking over their support page, but it makes zero mention of this error at all.

Joined Apr 14, 2009

·

10,406 Posts

denman

Joined Feb 21, 2013

·

842 Posts


Discussion Starter
·

#3

·

Jun 25, 2016

Exact same error when I run Fire Strike or Fire Strike Ultra, but it runs the full 3:30 benchmark

Joined Apr 14, 2009

·

10,406 Posts

it just might be the system info program. if you used my earlier advice; make sure to delete the steam version — forgot to mention that.

go to task manger and kill the systeminfo process, then try running it again.

maybe @Jpmboy would have better advise.

Варианты названия:

3DMark 13, 3DMark 2013, Futuremark 3DMark

3DMark — это тестовая программа от разработчиков из студии Futuremark. Издателем игры выступает Futuremark. 3DMark также известна под названиями 3DMark 13, 3DMark 2013 и Futuremark 3DMark.

Развернуть описание

Свернуть описание

Трейлеры, геймплей и другие видео

01:02

Сравнение DX11, DX12 и Mantle

Другое

01:00

3DMark — новый DX11-тест Sky Diver

Геймплей

Предложения магазинов и скидки

3DMark (STEAM, Global)

3DMark (STEAM, Global)

457 руб

PC

HRK Game

  • История цены
  • Уведомление о скидке

3DMark (STEAM/GLOBAL)

3DMark (STEAM/GLOBAL)

PC

Plati

  • История цены
  • Уведомление о скидке

3DMARK (STEAM КЛЮЧ/ВСЕ РЕГИОНЫ)+ПОДАРОК

3DMARK (STEAM КЛЮЧ/ВСЕ РЕГИОНЫ)+ПОДАРОК

PC

Plati

  • История цены
  • Уведомление о скидке

3DMark (STEAM)

3DMark (STEAM)

478 руб

-3% по промокоду VGTIMES

PC

Steampay

  • История цены
  • Уведомление о скидке

3DMark [Global] [Standard Edition Edition]

3DMark [Global] [Standard Edition Edition]

533 руб

-10% по промокоду vgtimes

PC

Wyrel

  • История цены
  • Уведомление о скидке

3DMark [Global] [Standard Edition Edition]

3DMark [Global] [Standard Edition Edition]

555 руб

-10% по промокоду vgtimes

PC

Difmark

  • История цены
  • Уведомление о скидке
  • Тест API Overhead для 3DMark позволит сравнить возможности DX11, DX12 и Mantle

  • Nvidia выпустила новый драйвер к выходу Metro: Redux

  • В 3DMark появится новый DX11-тест Sky Diver

  • Futuremark устроила викторину в честь годовщины 3DMark

  • Futuremark выпустила новую версию 3DMark

Отзывы и оценки

Оцените игру

Быстрая оценка
Детальная оценка

Нажмите на крестик рядом с названием критерия, если он не применим к этой игре или вы не хотите его оценивать

Добавить критерий оценки

5.5

Не привязывать итоговую оценку к составляющим

Оценить игру


Оценить игру

Оценить игру

Зарегистрируйтесь, чтобы всегда оставлять отзывы от своего имени без капчи

Отправить отзыв

sainfo

Member

Аватар користувача

Звідки: Харьков

Доброго всем дня!
Проблем с которой хотелось бы сообща разобраться заключается в том что система не проходит тест ни в одной версии именно 3DMark. Тест доходит где то до середины и отключается монитор. Системник по прежнему мигает но похоже что драйвер отключился и вырубил карту, а иногда просто перегружается ОС.
Конфигурация ПК в профиле. ОС сейчас установлена Windows 8.1 PRO x64. Драйвер видеокарты NVIDIA R344.75 WHQL Released.
Думается что собственно оборудование можно исключить из этой проблемы так как даже в режиме «ОС» такие тесты как FurMark и MSI Kombustor проходит без вопросов (разрешение 1920х1200). В игре Far Cry 4 Gold Edition при потреблении системника 380 Вт температура ГП составляет 66-68 град., обороты вентиляторов карты составляют 65 % после 4-5 часов игры. В простое температура ГП составляет 23 град при оборотах вентиляторов карты 40% и при потреблении системника 78 Вт.

Зображення Зображення

В чем же все таки причина и что бы это могло еще быть, в общем нужна помощь форумчан.
:beer:

p.s. Удалось проконтролировать сторонней прогой температуру ГП во время прохождения теста 3DMark и она не превышала 60 град (пока не перегрузился ПК). Так что перегрев ГП полностью исключен — так в чем же тогда причина?!

VES

Member

Аватар користувача

Звідки: Киев

Повідомлення

13.12.2014 21:16

Видеодрайвер 344.75 — кривой. Поставить в нанели НВ: режим макс производительности. Пробовать гонять тесты, если не помогло, — снести начисто видеодрайвер, и поставить 344.60-344.65.-344.80.

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

13.12.2014 21:46

Пробовал устанавливать 344.60, не помогло. Попробовал обновит все драйвера прогой Snappy Driver Installer R142. Обновил, тест 3DMark система прошла, но попугаев в двое меньше чем было раньше (до переустановки ОС когда она еще проходила тест 3DMark). Попробую еще поставить в нанели НВ: режим макс производительности.

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

14.12.2014 12:11

В общем забил я на это глючный 3DMark, если и не глючный то не понятно почему не желающий нормально у меня работать.
Сегодня переустановил систему, установил лицензионную Win8.1 pro x64 (rus). Стояла до этого кастомная сборка. Подумал может дело в этом. Вот сегодня переустановил, результат — те же коки только в профиль. 3DMark вообще не запускается. В то время как тесты в прогах FurMark и MSI Kombustor проходят без вопросов (разрешение 1920х1200). Ну а игра Far Cry 4 Gold Edition буквально аж из трусов выпрыгивает. Иначе говоря все просто летает. Прилагаю скрин производительности системы:

Зображення

Так что ну его этот 3DMark, спасибо всем за участие.
:beer:

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

19.12.2014 07:54

В общем внимательно изучив материалы из инета пришел к выводу что в нестабильности теста 3DMark виновата утилита SystemInfo. Так как это она (как оказалось) отвечает за целостность тестируемого оборудования во время теста (своеобразная защита от подлогов теста от Futuremark) и переключениями/запусками между тестами при которых и происходит сбой теста/системы.
И так, мои действия (может кому то тоже пригодится эта информация): удалил все установленные у меня версии 3DMark, вычистил реестр от следов Futuremark и 3DMark, установил по новой 3DMark и установил последнюю версию SystemInfo (скачанную с сайта производителя). После всех проделанных этих манипуляций 3DMark отработал все тесты без вопросов.
:beer:

MrGenius


  • #1

Ok, so today I download and install this latest version of 3DMark Basic Edition. Wasn’t expecting much. But apparently got much less?! Like nothing, nada, zip, zilch, jack squat. Cool new look and that’s it. Nothing more. Everything’s labeled «Not available» or «Advanced Edition only». You pay to play now!!! Or no benchmarks for you!!! Wait. What? Why? For real? You’re shitting me right? What’s up with that? It’s a little late for April Fools…ain’t it? Thinking I must be trippin’, I’ve been trying to figure this out for a few hours now. Searching here and there, googling this and that, getting absolutely nowhere. Is this the way it’s supposed to be now? Does this thing work for anybody not paying for it any more? Is that the point I’m missing? Am I doing something else wrong besides not clicking «BUY» or pulling an upgrade key out of my ass? Or am I just stuck in the Twilight Zone again? What’s the deal? I give up.

MrGenius


P4-630


Shou Miko


  • #4

I bought it a while ago on steam with a big discount, wait for that and buy it then.

Or: http://store.steampowered.com/app/223850/ demo.

I own the steam version too, but srsly it suxx xxxxx bcs it doesn’t work for like 75% of all it’s users even with the new update it still didn’t work for me on Widnows 10 Pro so I downloaded it here from TPU and installed it and it automaticly picked up my serial from steam even it’s not installed in the same location and it works wonderfully :laugh:

MrGenius


  • #5

I did this for now. And got the results I expected to get from the version I installed yesterday. It appears to be a working v2.0.1979 Basic Edition, with all the promised improvements. So if that’s what you want, I guess that’s the only way to get it now…for free. Or if all you want is a totally non-functional piece of shit promo for it download it from TPU. Why you would is beyond me. But apparently somebody thinks it’s a good idea. WTF ever.

EDIT: Oops. I lied. There’s no Ice Storm Unlimited. Just Ice Storm Extreme.

Last edited:

jboydgolfer


  • #6

I use the firstrike steam demo ,it lets you use all the test, jyst not at all difficulties,and options are missing.but i ran it with 2x gtx970’s,and didnt max out the ones available…so i suppose it serves its purpose.

MrGenius


  • #7

I tried downloading the latest version(v2.0.2067) today, twice. Both times I ended up with a 2.16GB compressed (zipped) folder that was «empty»? Man…I just can’t win. :(

3DMark.PNG

jboydgolfer


  • #8

hld on, ill dl it, and see if it comes up good or Empty.

thats the same as the Steam version(judging from the pics), just install it through steam, they are both free. with what i would assume is the same functionality.

i used 7Zip and it dl’ed and unzipped fine. from the US server

Last edited:

MrGenius


  • #9

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.

Last edited:

  • #10

Tried a couple different servers. Tried a couple different computers. Tried 7zip. Nothing, nothing, nothing. Same thing every time. I’m in The Twilight Zone again. Lots of oddity going on here. Leaving this alone lest I make things worse for myself.

Sorry to bother you guys with it.

I’d also kinda like to know how/why my screen name shows up at the bottom of the page as an actively viewing user/member now when I’m not logged in(regardless of what device I’m currently using too). It’s like I can’t log out. But I can…supposedly(stay logged in not checked). As another WTF is going on example. But I dare not ask.[/QUOTDid you buy

Did you own 3dMark 2013 before?

MrGenius


  • #11

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

This thread was probably a mistake though. I believe I’ve angered the gods again. I’d really feel better to call the case closed at this point. Like I said, I don’t want to make things worse. The Steam version works. And that’s just fine. I’d like that to stay as is. So I better just shut my mouth before they take that away from me too. And no, I’m not kidding…unfortunately.

Last edited:

  • #12

Not that I’m aware of. But I’ve installed several previous versions of free Basic Edition. I tried uninstalling the older version first before installing the version in the OP. Made no difference. But the Steam version installs and works perfectly.

so if it works in Steam then your all good?

MrGenius


  • #13

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

Caring1


  • #14

Downloading now, just because I am curious.
Edit: it comes up as blank to me too, something about blocked for security because it came from another computer.

Last edited:

MrGenius


  • #15

In that case it should be as simple as unblocking it. But it doesn’t appear to be. Since I’d already tried that. And it didn’t work. I even tried downloading it again today and unblocking it again, thinking the issue in regards to the empty folder bit was only temporary(as discussed in your thread). Surprise surprise…no dice once more. So apparently not. Again, WTF ever. Workaround available. Yadda yadda yadda. Thanks for wasting copious amounts of my precious time. Not you if you’re wondering what I mean by that. Whoever it is that can’t get their head out of their ass and fix this fucking download so it functions correctly and stops causing all the headaches for us. Jesus fucking Christ. The dipshits at Steam seem to be able to handle it. How hard can it fucking be? IT’S NOT WORKING. PLEASE FIX IT OR TAKE IT DOWN. THANKS!!!

At least I don’t appear to have been infected with anything as a result of all this senselessness.

Last edited:

jboydgolfer


  • #16

Yes…ALL GOOD! See…no more complaining. I’m a good boy. Sorry I said negative things. My bad. Lesson learned. Won’t do that again…I promise.

did You REALLY wait till just now to try the steam version?

MrGenius


  • #17

Oh hell no. I really did do that as soon as it was first suggested. And in the mean time since it updated itself to the latest version even. Wish I’d have done it sooner and skipped all this BS. That’s what I get for trusting TPU downloads. Which I actually still do. Since this is the only instance out of countless downloads where I’ve had any issues at all.

And yes, I broke my promise. So what? It ain’t the first time. Probably won’t be the last. Let me have it if you must. I am kidding this time though.

Last edited by a moderator:

Shou Miko


  • #18

My winrar gave me an error for the latest version of 3DMark some days ago, so I went to Guru3d to download it and it worked from there could unpack it.

MrGenius


  • #19

Noticed there was a new 3rd US(US-3) server up today. Tried that one and it finally worked…

NOT!!!

The folder wasn’t empty at least this time. But I’m right back to the same issue with the previous version. Totally non-functional POS promo. See posts #1 and #5. Come on TPU. Get your friggen act together already for crying out loud. You’re starting to look really bad here. Don’t you think?

I’d pondered trying guru. Guess I’ll be jumping ship and doing that now. Why? Because I can. Mostly because I’ve never had to revert to a Steam demo for a free 3DMark product(all of which I’ve been using for well over a decade without issues, like every one there is). And I see no reason to be satisfied with that option now. That and having a bunch of shit that doesn’t need to be running in the background while benching is slightly counter-intuitive. Why not open a couple web browsers and defrag my disks while I’m at it?

EDIT: Same story from Guru. So SCREW YOU TOO 3DMARK!!! What’s the story with this bullshit all the sudden? Advertising one thing and giving me another? I oughta sue your asses.

Last edited by a moderator:

  • #20

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

  • #21

I just use the demo to see if shits working ok ( DX ), other wise i think the program pretty pointless anyways.

MrGenius


  • #22

I don’t know what or why. But it’s definitely not just 2 of us. I just tried installing it on my Vista PC and it does appear to work on that one. It even suggested the Ice Storm Unlimited benchmark for it on the opening page(onboard graphics currently). But even though that’s only showed up with one Basic Edition version yet, I tried running it and got an immediate error and it refuses to run it. «Workload produced no results» score 0. What workload? Damn thing won’t even run for a second. But Ice Storm Unlimited still does not even show up on the benchmarks page with that install either(or any other so far, including the Steam demo). So that’s false advertising there period. So far as I know Ice Storm Unlimited does not actually exist. But of course you’re going to tell me that works fine for you too…right?

So, if it’s not some stupid Windows 10 thing, then I don’t know what it is. Because that’s pretty much the only relevant difference between the 2 PCs I’ve installed it on.

EDIT: The problem, as it turns out, with my Vista PC is lack of appropriate screen resolution to run the test. 1600×1200 don’t cut it.

Last edited:

  • #23

Yeah, it works fine for me, but I have several fully paid-for «Advanced Version» copies (used in nearly every review I’ve ever done here, so I have access to both W1zzard’s copy and my own personal copies). So I can only talk about paid-for versions, since the registration info is left behind.

What I’m talking about working, though, is the downloads from our servers here on TPU. You mentioned you had issues unpacking, both from here and from Guru3D, and since we downloaded from the same sources, and mine works but yours does not, I suggest looking for the problem elsewhere in your system.

AFAIK, you only get to run 1 test on the free version.

I do test in Windows 10 exclusively these days. Posted both a motherboard and memory review in the past two weeks, respectively. I’m sorry that that doesn’t really help you any, but I can say that I’ve installed both times for those reviews on a fresh install, and just because of this thread I downloaded and installed both the .1979 and the more recent version.

Shou Miko


  • #24

LOLOLOL. Works fine for me, so I’d hazard a guess that its something on your system causing the problems since another user (jboydgolfer) posted that it worked for them too. Maybe put your head together with the other user here (puma99dk|) who has problems, see if you can find the commonality.

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

  • #25

with the new 2067 I got no issues just downloaded it from the DE server here on TPU I can unpack it with WinRAR 5.10 beta 1 64bit (yeh ik it needs to be updated just haven’t got around to do it :laugh:)

I just use the default unzip tool that Win10 offers (right-click, extract all). I no longer test using WinRAR, so I have no need to install it… yet. :p

Thanks for confirming no problems with the downloads though. ;)



10244
Views

3
Replies



2
Participants



Last post by 
looniam, 


Jump to Latest

denman

So, I purchased 3DMark today since it was $4.99 on sale through the Steam Sale, but ever time I try to run a benchmark, I get:
Quote:

Oops! An error occurred.
Workload produced no results

I tried looking over their support page, but it makes zero mention of this error at all.

Exact same error when I run Fire Strike or Fire Strike Ultra, but it runs the full 3:30 benchmark

See less

See more




1

it just might be the system info program. if you used my earlier advice; make sure to delete the steam version — forgot to mention that.

go to task manger and kill the systeminfo process, then try running it again.

maybe @Jpmboy would have better advise.

This is an older thread, you may not receive a response, and could
be reviving an old thread. Please consider creating a new thread.

sainfo

Member

Аватар користувача

Звідки: Харьков

Доброго всем дня!
Проблем с которой хотелось бы сообща разобраться заключается в том что система не проходит тест ни в одной версии именно 3DMark. Тест доходит где то до середины и отключается монитор. Системник по прежнему мигает но похоже что драйвер отключился и вырубил карту, а иногда просто перегружается ОС.
Конфигурация ПК в профиле. ОС сейчас установлена Windows 8.1 PRO x64. Драйвер видеокарты NVIDIA R344.75 WHQL Released.
Думается что собственно оборудование можно исключить из этой проблемы так как даже в режиме «ОС» такие тесты как FurMark и MSI Kombustor проходит без вопросов (разрешение 1920х1200). В игре Far Cry 4 Gold Edition при потреблении системника 380 Вт температура ГП составляет 66-68 град., обороты вентиляторов карты составляют 65 % после 4-5 часов игры. В простое температура ГП составляет 23 град при оборотах вентиляторов карты 40% и при потреблении системника 78 Вт.

Зображення Зображення

В чем же все таки причина и что бы это могло еще быть, в общем нужна помощь форумчан.
:beer:

p.s. Удалось проконтролировать сторонней прогой температуру ГП во время прохождения теста 3DMark и она не превышала 60 град (пока не перегрузился ПК). Так что перегрев ГП полностью исключен — так в чем же тогда причина?!

VES

Member

Аватар користувача

Звідки: Киев

Повідомлення

Видеодрайвер 344.75 — кривой. Поставить в нанели НВ: режим макс производительности. Пробовать гонять тесты, если не помогло, — снести начисто видеодрайвер, и поставить 344.60-344.65.-344.80.

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

Пробовал устанавливать 344.60, не помогло. Попробовал обновит все драйвера прогой Snappy Driver Installer R142. Обновил, тест 3DMark система прошла, но попугаев в двое меньше чем было раньше (до переустановки ОС когда она еще проходила тест 3DMark). Попробую еще поставить в нанели НВ: режим макс производительности.

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

В общем забил я на это глючный 3DMark, если и не глючный то не понятно почему не желающий нормально у меня работать.
Сегодня переустановил систему, установил лицензионную Win8.1 pro x64 (rus). Стояла до этого кастомная сборка. Подумал может дело в этом. Вот сегодня переустановил, результат — те же коки только в профиль. 3DMark вообще не запускается. В то время как тесты в прогах FurMark и MSI Kombustor проходят без вопросов (разрешение 1920х1200). Ну а игра Far Cry 4 Gold Edition буквально аж из трусов выпрыгивает. Иначе говоря все просто летает. Прилагаю скрин производительности системы:

Зображення

Так что ну его этот 3DMark, спасибо всем за участие.
:beer:

sainfo

Member

Аватар користувача

Звідки: Харьков

Повідомлення

В общем внимательно изучив материалы из инета пришел к выводу что в нестабильности теста 3DMark виновата утилита SystemInfo. Так как это она (как оказалось) отвечает за целостность тестируемого оборудования во время теста (своеобразная защита от подлогов теста от Futuremark) и переключениями/запусками между тестами при которых и происходит сбой теста/системы.
И так, мои действия (может кому то тоже пригодится эта информация): удалил все установленные у меня версии 3DMark, вычистил реестр от следов Futuremark и 3DMark, установил по новой 3DMark и установил последнюю версию SystemInfo (скачанную с сайта производителя). После всех проделанных этих манипуляций 3DMark отработал все тесты без вопросов.
:beer:

Понравилась статья? Поделить с друзьями:
  • No response seen to icmp request ошибка
  • No quick fixes available ошибка перевод
  • No print service found ошибка фсс
  • No permission hikvision ошибка
  • No port for remote debugger esxi ошибка