Matlab ошибка 114

Is Matlab 2013 License Manager Error 114 appearing? Would you like to safely and quickly eliminate License Manager Error which additionally can lead to a blue screen of death?

When you manually edit your Windows Registry trying to take away the invalid matlab license manager error 9 keys you’re taking a authentic chance. Unless you’ve got been adequately trained and experienced you’re in danger of disabling your computer system from working at all. You could bring about irreversible injury to your whole operating system. As very little as just 1 misplaced comma can preserve your Pc from even booting every one of the way by!

Troubleshooting matlab license manager error 103 Windows XP, Vista, 7, 8 & 10

Simply because this chance is so higher, we hugely suggest that you make use of a trusted registry cleaner plan like CCleaner (Microsoft Gold Partner Licensed). This system will scan and then fix any Matlab 2013 License Manager Error 114 complications.

Registry cleaners automate the entire procedure of finding invalid registry entries and missing file references (including the Error error) likewise as any broken hyperlinks inside of your registry.

Issue with matlab license manager error 18

Backups are made immediately prior to each and every scan providing you with the choice of undoing any changes with just one click. This protects you against doable damaging your pc. Another advantage to these registry cleaners is that repaired registry errors will strengthen the speed and performance of one’s procedure drastically.

• http://www.mathworks.com/matlabcentral/answers/87085-how-do-i-fix-this
• http://imedea.uib-csic.es/master/cambioglobal/Modulo_V_cod101615/matlab_7_4/win32/help/base/install/pc/f3-58891.html
• https://www.youtube.com/watch?v=9vNNbFhxwwg
• http://stackoverflow.com/questions/25950912/license-error-matlab-r2014a

Cautionary Note: Yet again, for those who are not an state-of-the-art consumer it’s very encouraged that you simply refrain from editing your Windows Registry manually. If you make even the smallest error within the Registry Editor it can result in you some serious issues that may even call for a brand new set up of Windows. Not all difficulties attributable to incorrect Registry Editor use are solvable.

Fixed: matlab license manager error 15

Symptoms of Matlab 2013 License Manager Error 114
“Matlab 2013 License Manager Error 114” appears and crashes the energetic method window.
Your Personal computer routinely crashes with Matlab 2013 License Manager Error 114 when running the exact same system.
“Matlab 2013 License Manager Error 114” is shown.
Windows operates sluggishly and responds little by little to mouse or keyboard input.
Your computer periodically “freezes” for the number of seconds in a time.

Will cause of Matlab 2013 License Manager Error 114

Corrupt obtain or incomplete set up of Windows Operating System software program.

Corruption in Windows registry from a new Windows Operating System-related application adjust (install or uninstall).

Virus or malware infection which has corrupted Windows method documents or Windows Operating System-related application data files.

Another method maliciously or mistakenly deleted Windows Operating System-related files.

Mistakes this sort of as “Matlab 2013 License Manager Error 114” can be brought about by several different elements, so it really is important that you troubleshoot every of the achievable brings about to forestall it from recurring.

Simply click the beginning button.
Variety “command” inside the lookup box… Will not hit ENTER nonetheless!
Although keeping CTRL-Shift in your keyboard, hit ENTER.
You’re going to be prompted that has a authorization dialog box.
Click on Of course.
A black box will open having a blinking cursor.
Variety “regedit” and hit ENTER.
Within the Registry Editor, choose the matlab license manager error 9 connected key (eg. Windows Operating System) you wish to back again up.
Within the File menu, choose Export.
Inside the Preserve In list, pick out the folder in which you wish to save the Windows Operating System backup key.
Inside the File Title box, sort a reputation for the backup file, these types of as “Windows Operating System Backup”.
From the Export Vary box, ensure that “Selected branch” is selected.
Click on Help you save.
The file is then saved by using a .reg file extension.
You now use a backup within your matlab license manager error 103 related registry entry.

Solution to your matlab license manager error 96 problem

There are actually some manual registry editing measures that can not be talked about in this article due to the high chance involved for your laptop or computer method. If you want to understand more then check out the links below.

Additional Measures:

One. Conduct a Thorough Malware Scan

There’s a probability the 114 2013 Error License Matlab Manager error is relevant to some variety of walware infection. These infections are malicious and ready to corrupt or damage and possibly even delete your ActiveX Control Error files. Also, it’s attainable that your Matlab 2013 License Manager Error 114 is actually connected to some element of that malicious plan itself.

2. Clean matlab license manager error 400 Disk Cleanup

The a lot more you employ your computer the extra it accumulates junk files. This comes from surfing, downloading packages, and any sort of usual computer system use. When you don’t clean the junk out occasionally and keep your program clean, it could turn into clogged and respond slowly. That is when you can encounter an 114 error because of possible conflicts or from overloading your hard drive.

Once you clean up these types of files using Disk Cleanup it could not just remedy Matlab 2013 License Manager Error 114, but could also create a dramatic change in the computer’s efficiency.

Tip: While ‘Disk Cleanup’ is definitely an excellent built-in tool, it even now will not completely clean up License Manager discovered on your PC. There are numerous programs like Chrome, Firefox, Microsoft Office and more, that cannot be cleaned with ‘Disk Cleanup’.

Since the Disk Cleanup on Windows has its shortcomings it is extremely encouraged that you use a specialized sort of challenging drive cleanup and privacy safety application like CCleaner. This system can clean up your full pc. If you run this plan after each day (it could be set up to run instantly) you are able to be assured that your Pc is generally clean, often operating speedy, and always absolutely free of any Manager error associated with your temporary files.

How Disk Cleanup can help matlab license manager error 39

1. Click your ‘Start’ Button.
2. Style ‘Command’ into your search box. (no ‘enter’ yet)
3. When holding down in your ‘CTRL-SHIFT’ important go ahead and hit ‘Enter’.
4. You will see a ‘permission dialogue’ box.
5. Click ‘Yes’
6. You will see a black box open up plus a blinking cursor.
7. Variety in ‘cleanmgr’. Hit ‘Enter’.
8. Now Disk Cleanup will start calculating the amount of occupied disk space you will be able to reclaim.
9. Now a ‘Disk Cleanup dialogue box’ seems. There will be a series of checkboxes for you personally to pick. Generally it will likely be the ‘Temporary Files’ that consider up the vast majority of your disk area.
10. Verify the boxes that you want cleaned. Click ‘OK’.

How to repair matlab license manager error 97

3. System Restore can also be a worthwhile device if you ever get stuck and just desire to get back to a time when your computer system was working ideal. It will work without affecting your pics, paperwork, or other crucial information. You can discover this option with your User interface.

License Manager

Manufacturer

Device

Operating System

Matlab 2013 License Manager Error 114


5 out of
5

based on
61 ratings.

 

Click here follow the steps to fix Matlab 2013 License Manager Error 114 and related errors.

Instructions

To Fix (Matlab 2013 License Manager Error 114) error you need to follow the steps below:
Step 1:
Download (Matlab 2013 License Manager Error 114) Repair Tool
Step 2:
Click the «Scan» button
Step 3:
Click ‘Fix All‘ and you’re done!
Compatibility: Windows 7, 8, Vista, XP Download Size: 6MB Requirements: 300 MHz Processor, 256 MB Ram, 22 MB HDD Limitations: This download is a free evaluation version. To unlock all features and tools, a purchase is required.

Note:
This article was updated on 2023-04-04 and previously published under WIKI_Q210794

What is Matlab 2013 License Manager Error 114 error?

The Matlab 2013 License Manager Error 114 error is the Hexadecimal format of the error caused. This is common error code format used by windows and other windows compatible software and driver vendors.

This code is used by the vendor to identify the error caused. This Matlab 2013 License Manager Error 114 error code has a numeric error number and a technical description. In some cases the error may have more parameters in Matlab 2013 License Manager Error 114 format .This additional hexadecimal code are the address of the memory locations where the instruction(s) was loaded at the time of the error.

What causes Matlab 2013 License Manager Error 114 error?

The Matlab 2013 License Manager Error 114 error may be caused by windows system files damage. The corrupted system files entries can be a real threat to the well being of your computer.

There can be many events which may have resulted in the system files errors. An incomplete installation, an incomplete uninstall, improper deletion of applications or hardware. It can also be caused if your computer is recovered from a virus or adware/spyware
attack or by an improper shutdown of the computer. All the above actives
may result in the deletion or corruption of the entries in the windows
system files. This corrupted system file will lead to the missing and wrongly
linked information and files needed for the proper working of the
application.

How to easily fix Matlab 2013 License Manager Error 114 error?

There are two (2) ways to fix Matlab 2013 License Manager Error 114 Error:

Advanced Computer User Solution (manual update):

1) Start your computer and log on as an administrator.

2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.

3) In the new window, select «Restore my computer to an earlier time» option and then click Next.

4) Select the most recent system restore point from the «On this list, click a restore point» list, and then click Next.

5) Click Next on the confirmation window.

6) Restarts the computer when the restoration is finished.

Novice Computer User Solution (completely automated):

1) Download (Matlab 2013 License Manager Error 114) repair utility.

2) Install program and click Scan button.

3) Click the Fix Errors button when scan is completed.

4) Restart your computer.

How does it work?

This tool will scan and diagnose, then repairs, your PC with patent
pending technology that fix your windows operating system registry
structure.
basic features: (repairs system freezing and rebooting issues , start-up customization , browser helper object management , program removal management , live updates , windows structure repair.)

Уважаемые пользователи!Если у вас возникли проблемы с менеджером лицензий, пожалуйста используйте следующую последовательность действий.Внимательно прочитайте сообщение менеджера лицензий. Возможно у вас просто

1 Answer 1

Тему читают: 1 гость

TechnologiCS → TechnologiCS → Установка/настройка → Проблемы с менеджером лицензий и Расшифровка Кодов ошибок

Для просмотра онлайн кликните на видео ⤵

❓ Причина

1С находит признаки использования нелицензионной версии. Например, следы от эмуляторов ключей, наличие в реестре записей от эмуляторов или патчей (patch).

На деле означает, что нарушаются условия лицензирования.

Для фона

Само сообщение выглядит так:

Сообщение об ошибке

Решение — очистить систему от следов «взлома» защитных механизмов программы.

Первым делом сделайте копии информационных баз. В большинстве случаев, сами ИБ в порядке. Требуется только убрать «лишнее» из ОС. То, что мешает лицензионной 1С работать и хорошо себя чувствовать.

☝ Следующие действия связаны с операциями на уровне драйверов, служб и системного реестра. Будьте осторожны. Вы действуете на своё усмотрение, страх и риск.

Для операций с реестром — если боитесь удалять данные, сделайте бэкап указанных ниже веток, нажав правой кнопкой мыши на нужную ветку, и выбрав пункт меню «Экспортировать». При наличии файлов экспорта возможно возвращение сведений в реестр.

1. Через «Мой компьютер — Управление — Службы» остановите работу следующих служб:

• HASP Loader;
• Sentinel LDK License Manager;
• ICCSProxy.

В свойствах службы проверьте, какие используются файлы. Перед удалением службы посоветуйтесь с вашим администратором.

2. Удаление Haspflt

• Файл в каталоге %windows%system32drivershaspflt.sys

Если файл не удаляется (занят), то выполните команды от имени администратора:

loaddrv.exe -stop haspflt

loaddrv.exe -remove haspflt

del %systemroot%system32drivershaspflt.sys

Или

sc stop haspflt

sc delete haspflt

del %systemroot%system32drivershaspflt.sys

• Записи реестра для работы драйвера (удалить)

HKLMSystemCurrentControlSetServiceshaspflt

HKLMSystemCurrentControlSetServicesEmulator

HKLMSystemCurrentControlSetServicesEmu

• Дампы ключей HKLMSystemCurrentControlSetServicesEmulatorHASPDump, удалите ветку Emulator с вложенными путями

3. Удаление Vusbbus

• Файл в каталоге %windows%system32driversvusbbus.sys (или vusb.sys)

Если файл не удаляется (занят), то выполните команды от имени администратора:

sc stop vusbbus

sc delete vusbbus

del %systemroot%system32driversvusbbus.sys

del %systemroot%system32driversvusb.sys

• «Диспетчер устройств — Системные устройства — Virtual Usb Bus Enumerator», уберите с признаком «Удалять драйвера программы»

• Запись реестра для работы драйвера (удалить)

HKLMSystemCurrentControlSetServicesvusbbus

• Дампы ключей HKLMSystemCurrentControlSetNEWHASPServicesEmulatorHASPDump, удалите ветку NEWHASP с вложенными путями

4. Выполните перезагрузку.

✅ После этого, желательно переустановить новую платформу, установив в конце драйверы защиты, чтобы включить исходные файлы 1С. В крайнем случае — переустановка ОС и повторное развертывание 1С. Трудоемкий вариант, но рабочий.

_____________________________________

⚡ Подписывайтесь на канал или задавайте вопрос на сайте — постараемся помочь всеми техническими силами. Безопасной и производительной работы в 1С.

Ключи защиты и их маркировка

Аппаратные ключи защиты HASP4 Net подключаются к USB-портам компьютера. Общее количество пользователей, которые могут работать с системой «1С:Предприятие» равняется сумме доступных лицензий со всех компьютеров в сети, к которым подключены аппаратные ключи и настроен HASP License Manager.

Аппаратные ключи похожи на USB-флеш-накопитель и выглядят примерно вот так:

Многопользовательский клиентский ключ H4 NET5 ORGL8

Они могут различаться цветом и маркировкой. По маркировке можно определить что это за ключ: для каких программных продуктов он подходит и сколько лицензий предоставляет.

• ORGL8 — Локальный клиентский ключ;
• NET5 ORGL8 — Многопользовательский клиентский ключ на 5 пользователей;
• NET10 ORGL8 — Многопользовательский клиентский ключ на 10 пользователей;
• NET20 ORGL8 — Многопользовательский клиентский ключ на 20 пользователей;
• NET50 ORGL8 — Многопользовательский клиентский ключ на 50 пользователей;
• NET100 ORGL8 — Многопользовательский клиентский ключ на 100 пользователей;
• NET250+ ORG8A — Многопользовательский клиентский ключ на 300 пользователей;
• NET250+ ORG8B — Многопользовательский клиентский ключ на 500 пользователей;
• ENSR8 — Локальный ключ 32-разрядного сервера;
• EN8SA — Локальный ключ 64-разрядного сервера.

Так, на фотографии выше представлен многопользовательский клиентский ключ на 5 пользователей.Нужно отметить, что на одном компьютере может работать только один ключ каждой серии (ORGL8, ORG8A и ORG8B). Если подключить к одному компьютеру несколько ключей одинаковой серии, то будет задействован только один из них, выбранный произвольно.

Установка драйвера защиты

HASP Device Driver требуется установить на тех компьютерах к которым непосредственно подключены аппаратные ключи защиты. Этот драйвер входит в комплект поставки «1С:Предприятия» и его можно установить из меню «Пуск»:

Установка драйвера защиты из меню «Пуск»

Или из командной строки:

C:>”Program Files1cv8commonhaspdinst.exe” -i

Для ОС Linux нужно скачать драйвер с сайта компании SafeNet. Скачанный архив содержит DEB-пакет для Ubuntu/Debian, RPM-пакет для RedHat/SuSE и скрипт для автоматической установки. Попробуем вариант со скриптом, для этого скачаем и распакуем нужный архив. Далее сделаем исполняемым файл dinst и запустим его:

sudo chmod +x ./dinst

sudo ./dinst .

Результат будет выглядеть примерно так:

Установка драйвера в ОС Linux

Установку драйвера в любой операционной системе рекомендуется производить с отсоединенным USB-ключом.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Настройка

nhsrv.ini

В ОС Windows файл nhsrv.ini может располагаться в различных местах:

• каталог с установленным HASP LM (например, C:Program Files (x86)AladdinHASP LM);
• каталог Windows (C:Windows);
• системный каталог Windows (C:Windowssystem32 или C:Windowssystem).

Для ОС Linux файл настроек указывается при помощи параметра «-c» и его название и местоположение по умолчанию не определено.

Настройка HASP LM задаются значениями параметров секции [NHS_SERVER] файла nhsrv.ini:

• NHS_IP_LIMIT — определяет диапазон IP-адресов, обслуживаемых HASP LM. Например: 192.168.*.*, 192.168.1.1/24.
• NHS_ADAPTER — определяет IP-адрес одной или более сетевых карт, которые будут обслуживать HASP LM. Применяется при использовании HASP LM с Win32. Например: 10.1.1.111, 255.255.0.0.
• NHS_USERLIST — определяет максимальное количество пользователей, одновременно подключенных к HASP LM Значение по умолчанию: 250 (важно для ключей на 300 и 500 пользователей).

nethasp.ini

Для настройки взаимодействия системы «1С:Предприятия» с HASP LM используется конфигурационный файл nethasp.ini. Несмотря на то, что в большинстве случаев никакая дополнительная настройка не требуется полезно иметь представление о возможностях предлагаемых этим файлом.

Файл nethasp.ini, в ОС Windows, обычно располагается в каталоге 1С (например C:Program Files1cv8conf), а в ОС Linux  он может находиться в домашнем каталоге пользователя или в каталоге /etc.

В примере ниже указывается, что сервер защиты находится по адресу 192.168.0.12 и запрещается широковещательный механизм TCP/IP.

[NH_COMMON]
NH_TCPIP=Enabled
[NH_TCPIP]
NH_SERVER_ADDR=192.168.0.12
NH_USE_BROADCAST=Disabled

Далее рассмотрим прочие параметры, доступные в файле nethasp.ini.

Секция [NH_COMMON]

• NH_IPX — использовать или не использовать протокол IPX для связи с HASP LM, варианты: Enabled, Disabled (по умолчанию Enabled);
• NH_NETBIOS — использовать или не использовать протокол NetBIOS для связи с HASP LM, варианты: Enabled, Disabled (по умолчанию Enabled);
• NH_TCPIP — использовать или не использовать протокол TCP/IP для связи с HASP LM, варианты: Enabled, Disabled (по умолчанию Enabled);
• NH_SESSION — задает интервал в секундах, в течение которого программа пытается установить соединение с HASP LM (по умолчанию 2 секунды);
• NH_SEND_RCV — устанавливает для HASP LM максимальное время получения или отправки пакета (по умолчанию 1 секунда).

Последние два параметра могут быть использованы во всех секциях.

Секция [NH_IPX]

• NH_USE_SAP — использовать или не использовать службу SAP для поиска в сети HASP LM, варианты: Enabled, Disabled (по умолчанию Enabled);
• NH_USE_BROADCAST — использовать только механизм Broadcast для поиска в сети HASP LM, варианты: Enabled, Disabled (по умолчанию Enabled);
• NH_BC_SOCKET_NUM — определяет номер сокета (число в шестнадцатеричном виде) для широковещательного механизма (по умолчанию: 7483Н);
• NH_SERVER_NAME — определяет, будет ли приложение обмениваться данными только с HASP LM, находящимся в локальной сети, или с любыми другими HASP LM, варианты: localnet, Internet (по умолчанию Internet);
• NH_DATFILE_PATH — путь, по которому будет производиться поиск файлов haspaddr.dat и newhaddr.dat, содержащих сетевой адрес HASP LM.

Секция [NH_NETBIOS]

• NH_NBNAME — задает имя HASP LM (не более 8 символов);
• NH_USELANANUM — устанавливает номер коммуникационного канала.

Секция [NH_TCPIP]

• NH_SERVER_ADDR — устанавливает IP-адреса серверов HASP LM (количество адресов не ограниченно);
• NH_SERVER_NAME — обменивается данными с HASP LM с определенным именем (максимум 6 имен, каждое не более 7-ми символов);
• NH_PORT_NUMBER — устанавливает номер сетевого порта (по умолчанию 475);
• NH_TCPIP_METHOD — посылает пакет TCP или UDP, обращение к HASP LM всегда выполняется по UDP, независимо от значения этого параметра;
• NH_USE_BROADCAST — использовать широковещательный механизм UDP, варианты: Enabled, Disabled (по умолчанию Enabled).

На этом все, надеюсь, что данная статья была Вам полезна.

Если Вы нашли ошибку или неточность, пожалуйста, выделите фрагмент текста и нажмите Ctrl+Enter.

Загрузка…

When starting MATLAB I receive the following error:

ERROR: License checkout failed.
License Manager Error -114
SIGN= keyword required but missing from the license certificate.
This is probably because the license is older than the application
You need to obtain a SIGN= version of this license from your vendor.

or

When in the debug log file on the license server I noticed the following error:

ERROR: 8:40:36 (MLM) Invalid license key (inconsistent authentication code)
…
8:42:05 (MLM) DENIED: "MATLAB" jsmith@jsmith-deb6-64  (SIGN= keyword required but missing from the license certificate. (-114,525))

License Manager Error Messages

It can also be helpful to view the FLEXlm log file, lmlog.txt, in the $MATLABflexlm directory. To get more information about a FLEXlm license manager problem, see the FLEXlm End User Manual, available in PDF format in $MATLABflexlmenduser.pdf or go to the GLOBEtrotter Software, Inc. Web site, www.globetrotter.com.

Note   
You can also go to the support page on the MathWorks Web site, www.mathworks.com, and find information about a particular license manager error by searching the solution database by error number. For example, to find information about License Manager Error -15, enter «License Manager Error -15» in the search engine.

License Manager Error -2: Invalid License File Syntax

This error message typically indicates that there is a problem in your License File. On client systems, make sure your License File ($MATLABbinwin32license.dat) has the following format.

• SERVER host hostID port_num 
  USE_SERVER
  

Note that there should be a carriage return immediately following the USE_SERVER line.

License Manager Error -3: Cannot Connect to a License Server

This error can occur if the SERVER line in your License File is incorrect or missing.

To remedy this error, try the following:

• Make sure that the SERVER line in your License File matches the SERVER line in the License File on your license server. On client systems, the License File is $MATLABbinwin32license.dat; on your license server, the License File is $MATLABflexlmlicense.dat, where $MATLAB is the root MATLAB installation directory.

Note   
You must restart the license manager after making any changes to the License File on the license server.

• Make sure the TCP port number at the end of the SERVER line in your License File is not already being used by another application. On NT systems, run the netstat -p tcp command from C:WINNTsystem32. If the local system appears on the Foreign Address list, then the port number listed is being used. Change the port number on the SERVER line to a port that is not being used. FLEXlm has reserved ports in the range 27000 to 27009. Restart the license manager after making this change.
• Make sure that you do not have multiple vendor daemons (mlm.exe) running. Check your FLEXlm log file ($MATLABflexlmlmlog.txt) for the error «Multiple MLM Servers Running».

License Manager Error -5: License Checkout Failed. No Such Feature Exists.

This message usually indicates that you are trying to use a product for which you are not licensed. Check your License File to see if you are licensed to use this product.

If you are licensed for this product, this error may be the result of having extra carriage returns in your License File. To avoid this, make sure that each line begins with either #, SERVER, DAEMON, or INCREMENT.

Note   
You must restart the license manager after making any changes to the License File on the license server.

This error can also be caused by tab characters in the License File. Remove these tabs and replace with them spaces.

This error may also be the result of an incorrect system date. If your system date is set before the date that your license was made, you will get this error. See License Manager Error -10: Feature Has Expired to learn how to reset the system date.

License Manager Error -8: Invalid (Inconsistent) License Key

This error message typically indicates that your License File, $MATLABflexlmlicense.dat, has been corrupted. This can happen if the License File was edited or if an e-mail program inserted extraneous tabs or carriage returns in the INCREMENT lines.

One way to check for extraneous tabs and carriage returns is to open your License File in a text editor and view all nonprinting characters. Remove all the tab characters and all carriage returns that are not at the end of a line.

Check that the contents of your License File matches the license data sent you by The MathWorks.

License Manager Error -9: Invalid Host. License Checkout Failed.

If you get this error on a system running an individually licensed MATLAB, make sure you are running MATLAB on the same system it was installed on. The MathWorks locks a license to a particular system.

You can also get this error if you replaced your hard drive or changed the partition on an existing hard drive. To remedy this situation, rerun the installer. At Step 5: Select the Products You Want to Install, click on the More Options... button on the Product List dialog box and select the Update license option. This option updates your license without requiring that you reinstall MATLAB.

You can also get this error if you try to clone a Release 13 installation from one system to another.

License Manager Error -10: Feature Has Expired

This error indicates that one or more of your license keys has expired.

Check the expiration date on each of the INCREMENT lines in your License File. If the dates in the license file have already passed, contact the Customer Service department at The MathWorks (through the Web or through e-mail at service@mathworks.com). When contacting The Mathworks, include your License Number and the Host ID of your license server.

If none of your product licenses has expired, check that your system date and time are correct:

1. Click on the Start menu.
2. Choose Settings.
3. Click on Control Panel.
4. Choose Date/Time.

License Manager Error -11: License Checkout Failed. Invalid Date Format in License File.

This error indicates that the start date or the expiration date in the License File is invalid. This can happen if the expiration dates in the License File have been changed.

You can also get this error if the space character between the number of users field and the 20 digit encryption code in the INCREMENT line is missing. Compare the INCREMENT lines in your license file with the INCREMENT lines in your original license e-mail. They must be exactly the same.

This error can also occur if the SERVER and DAEMON lines are missing from the license.dat file. The installer adds these lines to the License File as part of the installation process.

License Manager Error -12: License Checkout Failed. Invalid Return Data from License Server.

This error can be caused by your network setup. When the license manager tries to connect to the server, the DNS Server does not find it because it does not add the domain name suffix into the search.

If all of your client systems are having this problem, change the name of the server in the SERVER line to the fully qualified name:

1. Change the SERVER line in all license.dat files on your network, which are located in $MATLABbinwin32, to have the fully qualified name of the server.
2. Restart the license manager on the server. (See Starting and Stopping the License Manager.)

If only some of the clients in your network installation are having this problem, edit the TCP/IP Hosts file on your client systems:

1. Open the file, C:WinNTsystem32driversetchosts
2. Add the hostname of your license server to this file. You can find your license server information in the SERVER line of your license.dat file.

1. For example, if your SERVER line looks like this,

   • SERVER hostname INTERNET=128.36.2.12 27000 
     

   Add the following line to your TCP/IP Hosts file.

   • 128.36.2.12 hostname 
     

1. Save the changes to the TCP/IP Hosts file.

License Manager Error -13: No SERVER Line in License File

This indicates that there is no SERVER line in the License File. This line should be added by the installer during the installation process.

To remedy this problem, run the installer again or manually edit the License File, $MATLABflexlmlicense.dat, adding the SERVER line. See License File for information about the format and contents of the SERVER line.

License Manager Error -14: Cannot Find SERVER Hostname in Network Database

If this error occurs on a client system, check to make sure that the hostname on the SERVER line in the license.dat file on your client system matches the hostname on the SERVER line in your license.dat file on your license server. Edit the SERVER line in the client license.dat file, if necessary.

Also, make sure that the server’s hostname, included in the SERVER line, is listed in the C:WINNTsystem32driversetchosts file for Windows NT.

License Manager Error -15: Cannot Connect to License Server

This error message can have several causes but the most common cause is that the license manager isn’t running on your license server.

Verify that both the license manager daemon and the vendor daemon processes, lmgrd and mlm, are running. You can check this via the Task Manager, which can be accessed by pressing the Ctrl+Alt+Delete key sequence. Run these commands on the system on which your license manager is running.

If the license manager isn’t running, see Starting and Stopping the License Manager for information about starting it.

License Manager Error -16

This error indicates that the path to the MATLAB vendor daemon, mlm.exe, is incorrect in your License File DAEMON line. See License File for an example of a DAEMON line.

License Manager Error -18: License Checkout Failed. License Server Does Not Support This Feature.

The most common cause of this error is updating your License File without restarting your license manager. Restart your license manager and then try to start MATLAB. See Starting and Stopping the License Manager.

If you get this error on a client system, but not your license server, the License File on the client probably needs to be updated. Copy the License File from the server onto the your client system ($MATLABbinwin32).

Here are some other possible solutions to this error:

• Make sure the INCREMENT lines in your license.dat file are exactly as they appeared in the original license e-mail you received from The MathWorks.
• Make sure the DAEMON line in your license.dat file identifies the correct license manager daemons, especially if you have multiple MATLAB installations on your system.
• Make sure the TCP port number at the end of the SERVER line in your license.dat file is not already being used by another application. Use the command netstat to show the status of all ports that are in use.

• On NT systems, run the netstat -p tcp command from C:WINNTsystem32. If the local system appears on the Foreign Address list, then the port number listed is being used. Change the port number on the SERVER line to a port that is not being used. FLEXlm has reserved ports in the range 27000 to 27009. Restart the license manager after making this change.

• Make sure the Host ID or IP Address listed in the commented section in the license.dat file matches the Host ID or IP Address in the SERVER line. If you are trying to run the license manager on a different system than the one that the license was generated for, you will need to get a new License File from The MathWorks.

License Manager Error -21: License File Does Not Support This Version

If you are getting this error on your license server, make sure you have installed the version of FLEXlm included with Release 13. Release 13 License Files will not work with the older FLEXlm versions.

If you have updated an existing license.dat file with new Release 13 passcodes, you still need to install FLEXlm 8.0d from the MATLAB CD.

If you are getting this error on one of your client systems and not on the server, make sure the License File on the client is in the following format.

• SERVER host hostname port_num 
  USE_SERVER 
  

The SERVER line in the client system License File should be the same as the SERVER line found in the License File on the license server.

Also, make sure you are using your Release 13 license and not a license from a previous release.

License Manager Error -25: License Server Does Not Support This Version of This Feature

This error indicates that you are trying to run MATLAB 6.5 with an old license. You must update your license.dat file with your new license passcodes.

If you do not have your MATLAB Release 13 license, contact Customer Service at The MathWorks.

License Manager Error -39: No License for Feature

You may encounter the following license manager error:

• License Manager Error -39
  User/host not on INCLUDE list for feature
  Feature: MATLAB
  

License Manager Error -83: FLEXlm Version of Client Newer Than Server

This error message usually indicates that the version of the license manager on the client system is newer than the license manager on the server system. When MATLAB starts, the license file is pointing to the wrong version of the license manager.

To correct the problem, change the path of the DAEMON line in your license.dat file. For a UNIX server, the DAEMON line for all license files should resemble this sample (the pathname of your daemon will be different).

• DAEMON MLM $MATLAB/etc/lm_matlab
  

For a PC server, the DAEMON line for all license files should read

• DAEMON MLM $MATLABflexlmmlm.exe
  

where $MATLAB is your MATLAB installation directory. After changing your License File, be sure to restart the license manager.

License Manager Error -84: Missing Options File

License manager cannot find your options file.

Possible resolutions:

• Make sure the installer created an options file during the installation procedure. The full path of the options file is $MATLABflexlmMLM.opt, where $MATLAB is your MATLAB installation directory. See Setting Up Network Named User Licensing for more information.
• Make sure that the DAEMON line in your License File includes the full pathname of your options file. Check the processed License File, $MATLABflexlmlicense.dat. If the DAEMON line wraps onto a second line, make sure there is a line continuation character () at the end of the first line.
• Make sure you are listed as a valid user of the product you are trying to use.

License Manager Error -88: License Checkout Failed

This error indicates that your system clock has been set incorrectly. Check that your system date and time are correct. To learn how to change the system date, see License Manager Error -10: Feature Has Expired.

License Manager Error -96: Server Node is Down or Not Responding

This error can occur if you are running DHCP (to obtain a dynamically assigned IP address) on your license server. MATLAB cannot connect with the License Manager because it uses TCP/IP protocols for communication and your IP address is changing.

To fix this problem, follow this procedure.

1. Obtain the current IP address for your server. If you are on UNIX or Linux, use the ifconfig command. On a PC running Windows, you can use the ipconfig command at a DOS prompt.
2. Edit your hosts file and change the IP address for your server’s entry to be the correct IP address. On UNIX or Linux systems, edit the /etc/hosts file. On Windows NT and Windows 2000 systems, edit the C:Winntsystem32driversetchosts file.

License Manager Error -97: License Checkout Failed

This error is often caused by trying to run both MATLAB 5.3 and MATLAB 6.5 on the same system with different license managers. If this is the case, run both copies of MATLAB with the same License File. See Performing Common License Management Tasks for more information.

If you are not trying to run MATLAB 5.3 but only want to run MATLAB 6.5, make sure you have installed FLEXlm version 8.0d from the Release 13 CD. MATLAB 6.5 will not run with an older version of the license manager.

Problems During Installation

Troubleshooting an Installation That Uses Dongles