M2 1317 сброс ошибки

Are you facing the frustrating Samsung Printer Error Code M2-1317, it means that there is a fuser wrap jam. This error can be caused by several things, but most often it is due to a piece of paper being caught in the fuser assembly. To fix this error, you will need to remove the jammed paper from the fuser assembly and then reset the printer. Here, we will guide you through troubleshooting and resolving Fuser Wrap Jam Error in no time. At the very first step, you can try to restart the printer and check for success directly.

What Causes Samsung Printer Error Code M2-1317?

The error code m2-1317 corresponds to Fuser Wrap Jam Error. It indicates that the fuser wrap has become jammed in the printer. Several things can cause the fuser wrap to become jammed, including

• Paper that is too thick or too heavy for the printer.
• A paper jam in the printer.
• A foreign object such as a piece of paper or a pen has become caught in the printer.
• A defective fuser wrap.

Related: Samsung Printer Error Code 11-1112

Troubleshooting Steps to Fix Samsung Printer Error Code M2-1317

If your printer shows an M2-1317 error, it means that there is a problem with the fuser wrap. This error can be caused by a variety of things, but the most common cause is a paper jam. Follow the troubleshooting steps below to fix this error.

Check for Paper Jams

The first thing you should do when troubleshooting this error is to check for paper jams. Open up your printer and look for any pieces of paper that may be stuck in the fuser assembly. If you find any, remove them carefully and then try printing again. To fix Samsung Printer Error Code M2-1317, follow these steps

• Check for paper jams or other obstructions in the printer.
• If you find a paper jam, remove it and try printing again.
• If you cannot find a paper jam or other obstruction, open the printer’s top cover and look for any loose toner or debris inside the printer. Remove any loose toner or debris you find and try printing again.

Clean the Fuser Assembly

If there are no paper jams, the next step is to clean the fuser assembly. You can do this by using a soft cloth soaked in distilled water. Gently wipe down all of the rollers and other parts of the assembly. Once you’re finished, dry off the assembly with a clean towel or let it air dry. Check for the success of Samsung Printer Error Code M2-1317.

Replace the Fuser Assembly

If cleaning the fuser assembly does not fix the problem, you may need to replace it. You can purchase a new fuser assembly from Samsung or an authorized Samsung dealer. Reset the Printer If all else fails, you can try resetting the printer. To do this, unplug it from the power source for at least 20 seconds and then plug it back in. This should reset the printer and hopefully fix Samsung Printer Error Code M2-1317.

Check that Printer Is Leveled Properly

Printers are designed to function best when they are level. If your printer is not level, it can cause printing problems. Use a level to check both the front and back of the printer. The printhead carriage should be level with the platen. The paper feed rollers should be level with each other. If your printer is not level, you will need to adjust it. To do this, find the leveling screws on the bottom of the printer. Loosen the screws and move the printer until it is level. Then, retighten the screws.

Related: Samsung Printer Error U2-1112

FAQs

How do I fix the Jam on my Printer Samsung?

If you face Samsung Printer Error Code M2-1317, it is likely due to a fuser wrap jam. This error can occur if the fuser assembly is not installed correctly, or if there is debris preventing the fuser assembly from moving properly. To resolve this error, follow the steps below

• Make sure that the fuser assembly is installed correctly. If it is not, re-install it according to the manufacturer’s instructions.
• Remove any debris that may be blocking the fuser assembly from moving freely. This could include paper pieces, toner buildup, or other foreign objects. Use a soft cloth to gently wipe away any debris you find.
• Finally, restart your Samsung printer and try printing again.

How do you Fix a Jam on a Fuser Wrap?

To remove the jammed paper from the fuser assembly, first, make sure that the printer is turned off and unplugged. Then, open the front cover of the printer and remove any loose paper from the inside. Next, locate the fuser assembly and gently pull it out of the printer. Once you have removed the fuser assembly, locate the jammed piece of paper and remove it. Finally, reinstall the fuser assembly and close the front cover of the printer.

How to Reset Samsung Printer?

To resolve the Samsung Printer Error Code M2-1317, you will need to reset your Samsung printer. To do this, simply turn off the printer and then unplug it from power for 30 seconds. After 30 seconds have passed, plug your Samsung printer back in and turn it on. Your printer should now be reset and ready to use.

How do I Clean the Fuses on my Samsung Printer?

Here is a step-by-step guide on how to do so

1. Firstly, plug your printer in from the power outlet and then open up the rear cover.
2. Locate the fuser assembly inside the printer and gently remove it.
3. Once the fuser assembly is removed, you will be able to see two black fuses located on it. These are the fuses that need to be cleaned.
4. Use a cotton swab or a soft cloth dipped in alcohol to clean the fuses. Make sure that you do not damage them while cleaning.
5. Once both fuses are clean, reinsert the fuser assembly back into its rightful place and close the rear cover of your printer.
6. Plug your printer back into the power outlet and turn it on. The Samsung Printer Error Code M2-1317 should now be resolved and your Samsung printer should work properly again.

How do you Clear a Fuser Error?

The Samsung Printer Error Code M2-1317 means that there is a problem with the fuser unit. The fuser unit is what heats the toner so that it can be fused onto the paper. If the fuser unit is not working properly, it can cause the print quality to suffer or even prevent printing altogether. There are a few things that you can do to try and clear a fuser error on your Samsung printer.

1. First, make sure that the printer is turned off and unplugged from the power source.
2. Next, open up the front cover of the printer and locate the fuser unit.
3. Once you have found the fuser unit, disconnect any cables that are connected to it, and then remove the two screws that hold it in place.

More Helpful Guides

How to Fix Samsung Printer in Error State?
Samsung Easy Wireless Setup
Samsung Xpress C480W Setup

Страницы: [1] 2   Вниз

Страницы: [1] 2   Вверх

Samsung Printer Error Code M2-1317:

Are you encountering the annoying Samsung Printer Error Code M2-1317? If so, a fuser wrap jam is the likely cause. There are some potential causes for this error, but the fuser assembly becoming clogged with paper is the most frequent one.

Remove the stuck paper from the fuser assembly, then restart the printer to resolve this issue. Here, we’ll walk you through diagnosing the Fuser Wrap Jam Error and getting it fixed quickly. You can attempt to restart the printer as a first step and immediately determine whether it was successful.

What Leads to the M2-1317 Samsung Printer Error Code?

Fuser Wrap Jam Error has the error number m2-1317. It suggests that the printer’s fuser wrap has jammed. The fuser wrap can get stuck for some reasons, such as

• Too hefty or thick of paper for the printer.
• The printer jammed up with paper.
• A piece of paper or a pen that is not of this world has become lodged in the printer.
• It’s an unreliable fuser wrap.

Steps for Troubleshooting Samsung Printer Error Code M2-1317

If your printer displays an M2-1317 error, the fuser wrap is malfunctioning. There are many possible causes for this error, but the most frequent is a paper clog. To resolve this error, go to the below troubleshooting methods.

Check for Paper Jams

Checking for paper jams should be your first step in troubleshooting this situation. Look inside your printer to see if any paper fragments are lodged in the fuser assembly. If you discover any, gently remove them before attempting to print again. Follow these instructions to resolve Samsung Printer Error Code M2-1317.

Verify the printer for paper jams or other obstructions.

Remove any paper jams you find, then try printing again.

Open the printer’s top cover and check the interior for any loose toner or other debris if you cannot locate a paper jam or other obstruction. Try printing once more after cleaning up any loose toner or other debris.

Make the Fuser Assembly Clean

Cleaning the fuser assembly comes next if there are no paper jams. To accomplish this, use a delicate cloth that has been soaked in distilled water. Cleanse all of the rollers and the assembly’s other components gently. After you’re done, let the assembly air dry or dry it with a fresh towel. Verify the Samsung Printer Error Code M2-1317’s success.

Switch Out the Fuser Assembly

If cleaning it does not solve the issue, you might need to replace the fuser component. A brand-new fuser assembly is available from Samsung or a Samsung-approved dealer. Printer Reset: You can try resetting the printer if all else fails. To accomplish this, unplug it for at least 20 seconds, then plug it back in. With any luck, this will restart the printer and resolve Samsung Printer Error Code M2-1317.

Verify That the Printer is Properly Levelled

Printers are made to work optimally on a level surface. Printing issues may arise if your printer needs to be level. Check the front and back of the printer with a level. The platen and printhead carriage ought to be parallel. The rollers used to feed paper should be parallel to one another. You will need to adjust your printer if it isn’t level. Look for the levelling screws on the printer’s base to do this. To level the printer, loosen the screws and move it. Retighten the screws after that.

FAQs

1 How Can a Jammed Fuser Wrap Be Fixed?

Ensure the printer is off and unplugged before attempting to unjam the paper from the fuser assembly. After that, remove any interior loose paper by opening the printer’s front cover. The fuser assembly should then be located and carefully removed from the printer. Find and remove the stuck piece of paper after removing the fuser assembly. Reinstall the fuser assembly, then close the printer’s front cover.

2 How Can a Samsung Printer Be Reset?

It would help if you restart your Samsung printer to fix the M2-1317 Samsung Printer Error Code. Switch off the printer and disconnect it for 30 seconds to accomplish this. Plug your Samsung printer back in and turn it on after 30 seconds. Now that it has been reset, your printer ought to be usable.

3 How may a Fuser Error be cleared?

According to the Samsung printer error code M2-1317, the fuser unit has an issue. The fuser unit heats the toner to fuse to the paper. The print quality may degrade, or printing may not even be possible if the fuser device malfunctions. You can try a few different things to fix a fuser problem on your Samsung printer.

First, ensure the printer is removed from the power source and switched off.

Locate the fuser unit by first removing the printer’s front cover.