Loading ibss component ошибка

Moderators: Lily Lee, jc_3u, Moderators

Return to “Help & Support”

Okey dokey. so at first I kept repeatedly getting the Red screen of death. Problem solved by disconnecting front camera. but now, It gets to «waiting for iPhone» and then the iPhone reboots and iTunes spits out error 4013. I then tried 3u tools firmware flash, I still get stuck at 19%. I have tried DFU Mode. no help. So then in 3u tools I clicked «exit recovery mode» and the phone went into an infinite boot loop which I had to force restore mode to stop. I am so confuzzled.

@oldturkey03 @avanteguarde @mayer

OK. So Upon further inspection I found the water damage indicator near the SIM card was red while the 2 others were white. So I am not sure whether it was the indicator that failed or not, as it is my grandfathers phone. he says he has never spilled/dropped it in water. everything looks clean with the exception of my fingerprints on some of the parts.

I got the log from 3u tools.

———————————————————————————-

Activation of device used in:

Used for activating the new unactivated iDevice

Used for activating the flashed unactivated iDevice

———————————————————————————-

Activation supports below iDevices:

iPad1234minimini2mini3mini4AirAir2Pro

iPod Touch23456

iPhone3G3GS

iPhone44s

iPhone55c5sSE

iPhone66 Plus6s6s Plus

iPhone77 Plus

———————————————————————————-

Steps of activating iDevice:

1.Insert the SIM card into iDevice(iPad, iPod ignore this step), SIM card of corresponding carrier needs to be inserted into the locked iDevice

2.Please make sure iDevice under the normal status

3.Please connect your iDevice to your computer using the USB cable

———————————————————————————-

13:42:48 Detecting AppleMobileDevice service

13:42:48 Waiting for iDevice connect in normal mode

13:42:58 Operations are failed

13:42:58 Elapsed Time: 00:00:10

———————————————————————————————————————

Below devices support to query shsh:

iPod Touch2, iPod Touch3, iPod Touch4, iPod Touch5, iPod Touch6

iPad1,iPad2,iPad3,iPad4,iPad Air,iPad Air2,iPad mini/2/3/4,iPad Pro

iPhone3G,iPhone3GS,iPhone4,iPhone4s,iPhone5,iPhone5c,iPhone5s,iPhone se

iPhone6/6s,iPhone6p/6sp,iPhone7/7p,iPhone8/8p,iPhoneX

———————————————————————————————————————

Steps to enter DFU Mode:

1. Keep iDevice in Normal Mode or Recovery Mode, plug USB cable (please don’t use USB extension cable)

2. Hold HOME button(iPhone7/7p hold Volume Down button instead), then hold POWER button until the screen is blank

3. Release the POWER button after about 4 seconds, but keep holding the HOME button for about 10 seconds

iPhone8, iPhone8 Plus Steps to enter DFU Mode:

1. Plug an original USB cable,quick-press Volume «+» button, then Volume «-» button and hold the Power button.

2. When the iDevice turns off, hold the Volume «-» button, then release the Power button after 5 seconds, till it prompts «succeded».

More tutorials about iPhone8/8p and other iDevices, you could refer from: http://url.3u.com/RZbM7naa

———————————————————————————————————————

13:45:33 Friendly reminder:

13:45:33 Please make sure iDevice turned off ‘Find My iPhone’

13:45:33 The iDevice could not be activated without Apple ID after flash, if the iDevice turned on ‘Find My iPhone’

13:45:33 Method to check: Settings -> iCloud -> Find My iPhone

———————————————————————————————————————

13:45:33 Please connect USB cable to iDevice, make sure your iDevice in DFU Mode

13:45:33 Reading information from iDevice

13:45:33 ECID: 000003F4AD9F4C1C

13:45:33 Product Type: iPhone6,1

13:45:33 Hardware Model: n51ap

13:45:33 Downloading config

13:45:35 Download request file

13:45:35 Reading random NONCE

13:45:35 Querying for SHSH file on Apple Server

13:45:35 Saving SHSH file to our server

13:45:36 Generator: 0x5606b776c17ce4b6

13:45:36 Requesting shsh2

13:45:36 Saving SHSH file to our server

13:45:37 11.2.5(15D60) Apple still supports the signing of this firmware

13:45:37 Your iDevice has the following SHSH backups:

13:45:37 10.1(14B72)——Apple server no longer supports the flash of this firmware version

13:45:37 10.1.1(14B100)—Apple server no longer supports the flash of this firmware version

13:45:37 11.2.5(15D60)—You can flash the official firmware iPhone_4.0_64bit_11.2.5_15D60_Restore.ipsw

13:45:37 Flash and jailbreak of apple device, please visit official website of 3uTools http://www.3u.com

13:45:37 Elapsed Time: 00:00:04

———————————————————————————————————————

Below iDevices support to professional flash:

iPod Touch2, iPod Touch3, iPod Touch4, iPod Touch5, iPod Touch6

iPad1,iPad2,iPad3,iPad4,iPad Air,iPad Air2,iPad mini/2/3/4,iPad Pro

iPhone3G,iPhone3GS,iPhone4,iPhone4s,iPhone5,iPhone5c,iPhone5s,iPhone se

iPhone6/6s,iPhone6p/6sp,iPhone7/7p,iPhone8/8p,iPhoneX

———————————————————————————————————————

Steps to enter DFU Mode:

1. Keep iDevice in Normal Mode or Recovery Mode, plug USB cable (please don’t use USB extension cable)

2. Hold HOME button(iPhone7/7p hold Volume Down button instead), then hold POWER button until the screen is blank

3. Release the POWER button after about 4 seconds, but keep holding the HOME button for about 10 seconds

iPhone8, iPhone8 Plus Steps to enter DFU Mode:

1. Plug an original USB cable,quick-press Volume «+» button, then Volume «-» button and hold the Power button.

2. When the iDevice turns off, hold the Volume «-» button, then release the Power button after 5 seconds, till it prompts «succeded».

More tutorials about iPhone8/8p and other iDevices, you could refer from: http://url.3u.com/RZbM7naa

———————————————————————————————————————

13:45:57 Friendly reminder:

13:45:57 Please make sure iDevice turned off ‘Find My iPhone’

13:45:57 The iDevice could not be activated without Apple ID after flash, if the iDevice turned on ‘Find My iPhone’

13:45:57 Method to check: Settings -> iCloud -> Find My iPhone

———————————————————————————————————————

13:45:57 Please connect USB cable to iDevice, make sure your iDevice in DFU Mode

13:45:57 Reading information from iDevice

13:45:57 Product Type: iPhone6,1

13:45:57 MAIN CPU ID: 8960

13:45:57 Filename of firmware : iPhone_4.0_64bit_11.2.5_15D60_Restore.ipsw

13:45:57 Firmware Version: 11.2.5

13:45:58 Product Build: 15D60, 15

13:45:58 Image4 supported: TRUE

13:45:58 Extracting FileSystem from firmware

13:45:58 Reading ECID

13:45:58 iDevice ECID: 000003F4AD9F4C1C

13:45:58 Reading random NONCE

13:45:58 Querying for SHSH file on Apple Server

13:45:58 Saving SHSH file to our server

13:45:59 iDevice will connect to DFU Mode automatically (5 minutes in Win7)

13:45:59 Loading iBSS component

13:46:01 Reading random NONCE

13:46:01 Loading iBEC component

13:46:22 iDevice will connect to Recovery Mode automatically (5 minutes in Win7)

13:46:22 Loading RestoreRamdisk

13:46:28 Connecting with Restore Mode

OS: Ubuntu 19.04
Device: iPhone 7 Global (iPhone9,1 A1660)
Device iOS: 13.x
Target iOS: 11.0
SHSH: no

I am trying to downgrade the phone and I don’t have the SHSH blobs from previous versions of iOS.

I am using ipwndfu to get into pwned DFU mode:

$ sudo python ipwndfu -p
*** checkm8 exploit by axi0mX ***
Found: CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0006398020F9E526 IBFL:3C SRTG:[iBoot-2696.0.0.1.33]
Device is now in pwned DFU Mode.
(1.42 seconds)

$ sudo python ipwndfu -p
*** checkm8 exploit by axi0mX ***
Found: CPID:8010 CPRV:11 CPFM:03 SCEP:01 BDID:08 ECID:0006398020F9E526 IBFL:3C SRTG:[iBoot-2696.0.0.1.33] PWND:[checkm8]
Device is already in pwned DFU Mode. Not executing exploit.

Then I am trying to downgrade it using Cydia server to get signatures (I don’t know if them matter, since it is in pwned DFU mode), but after iBSS are extracted and idevicerestore tries to send iBSS component to the phone, it fails and the phone reboots in normal mode (go to that first screen, telling me to configure, activate, bla bla bla):

[==================================================] 100.0%
Found ECID 1752072332109094
Getting ApNonce in dfu mode... a1 b7 79 7f 6e 0c f7 83 8f b3 86 ed e3 17 bb f4 36 fc ae 86 73 54 14 63 2d 93 70 27 4b 0d ec 49 
Trying to fetch new SHSH blob
Getting SepNonce in dfu mode... b9 c2 bd b5 b3 ea 80 14 e2 48 ee ec c3 70 f8 b4 0b e9 c9 65 
Sending TSS request attempt 1... response successfully received
Received SHSH blobs
Extracting iBSS.d10.RELEASE.im4p...
Not personalizing component iBSS...
Sending iBSS (416413 bytes)...
ERROR: Unable to send iBSS component: Unable to upload data to device
ERROR: Unable to send iBSS to device
ERROR: Unable to place device into recovery mode from DFU mode

What can I be doing wrong? Is it my fault, is something in the source code, am I missing some point?

1. 04.08.2017, 01:26

   
   

   #1

   Iphone 5s, не могу восстановить
   

   Парень забыл код (свой), до этого телефон прекрасно работал.
   Ну решил сам восстановить через itunes. Прошивка качалась как обычно долго и он по коду модели, скачал ее сам.
   Надо заметить, что корпус у него от шестерки, а внутри 5s, соответственно на корпусе код А1586, но прошиву говорит качал для 5s, типа последняя цифры на старом корпусе были 57 (видимо A1457). Прошивка (полоска) у него дошла до конца, после появилось яблоко и сразу телефон встал на шнурок (подсоедините к Itunes).
   Я этого рассказа по началу не слышал и решил прошить, как обычно. Подключил к тунцу, тот определил серийник и предложил восстановиться. Itunes качнул нужную прошиву и на этапе подготовки телефона надолго повисал.
   Аналогичная проблема в DFU. Itunes последний, система win7 чистая.
   Пробовал вывести из рекавери утилитой redsn0w_win_0.9.15b3, но и она выдавала ошибку.
   Подскажите, как теперь оживить это чудо техники.
   Сейчас попробовал прошить в 3utols, то же выдает ошибку

   ---