Linde Forklift H12 14 1618 20 Parts Manual
Linde Forklift H12 14 1618 20 Parts Manual
Linde Forklift H12 14 1618 20 Parts Manu
Adobe Acrobat Document
1.2 MB
Linde P200 Operator’s Manual
Linde P200 Operator’s Manual
Linde P200 Operator’s Manual.pdf
Adobe Acrobat Document
1.2 MB
Linde K10 K13 Operator’s Manual
Linde K10 K13 Operator’s Manual
Linde K10 K13 Operator’s Manual.pdf
Adobe Acrobat Document
855.7 KB
Linde E20 25 30 Forklift Trucks Service Manual PDF
Linde E20 25 30 Forklift Trucks Service Manual PDF
Linde E20 25 30 Forklift Trucks Service
Adobe Acrobat Document
2.4 MB
Linde H50 80 Forklift Trucks Operator’s Manual PDF
Linde H50 80 Forklift Trucks Operator’s Manual PDF
Linde H50 80 Forklift Trucks Operator’s
Adobe Acrobat Document
5.5 MB
Linde E16 20 Forklift Trucks Original Operator’s Manual PDF
Linde E16 20 Forklift Trucks Original Operator’s Manual PDF
Linde E16 20 Forklift Trucks Original Op
Adobe Acrobat Document
6.5 MB
Some LINDE Forklift Truck Service Manuals PDF with Wiring Diagrams & Error Codes DTC are above the page.
The history of Linde Material Handling began back in 1904, when Hugo Güldner, Karl von Linde and Georg von Kraus founded the joint venture Güldner Motoren-Gesellschaft
GmbH in Munich. Three years later, the company moved to Aschaffenburg.
In 1929, Linde’s Eismaschinen Aktiengesellschaft acquired all of the company’s shares and gradually restructured it. At that time, the most important products were engines and
agricultural tractors.
The company flourished in the middle of the last century and was associated with the active development of technological solutions.
In 1969, the company completely stopped the production of tractors and focused exclusively on the production and development of forklifts and material handling equipment.
Already in 1971, Linde presented the electric forklift at the famous exhibition Hannover Messe.
Since the 1970s, Linde has been actively expanding through the purchase of core assets around the world. So in 1977,
the Baker Material Handling Corporation was acquired by the manufacturer of loaders from the USA, in 1984 the French manufacturer of
forklift trucks Fenwick joined Linde, and in 1989 the British manufacturer of
forklifts Lansing Bagnall.
In 1993, Linde came to China with the help of forklift company Linde-Xiamen.
In 2006, Linde Material Handling, until then a division of Linde AG, moved to the
newly created group of companies KION.
From January 1, 2013, the hydraulics division was legally independent Linde Hydraulics separated from Linde Material Handling.
In 2010, Linde became the first industrial truck manufacturer in Europe to include a range of fuel cells in its range.
In 2014, the first cars with a lithium-ion battery appeared. Linde electric forklift drive technology has been offered since 2011 under
the Linde eMotion label for applications such as commercial electric drive trucks or electric forklifts.
In 2015, Linde introduced the first automated vehicles in cooperation with Balyo and the fleet management system connect.
Linde Forklifts: owner’s, service and maintenance manuals, error codes list, DTC, spare parts manuals & catalogues, wiring diagrams, schematics free download PDF
| Title | File Size | Download Links |
| Linde 1219 Technical Specifications [PDF] | 468.4kb | Download |
| Linde E 20-02, E 25-02, E 30-02, E 20 / 600-02, E 25 / 600-02, E 30 / 600-02 Forklift Operating Manual [PDF] | 7.6Mb | Download |
| Linde e16 Technical Specifications [PDF] | 463.8kb | Download |
| Linde E16C-03, E16P-03, E20P-03 Operating Manual [PDF] | 6.3Mb | Download |
| Linde E16C-03, E16P-03, E20P-03 Service Manual [PDF] | 13.5Mb | Download |
| Linde Electric Forklift E 20 / 25 / 30 Series 336 Service Manual [PDF] | 1.6Mb | Download |
| Linde H12 14 1618 20 Spare Parts catalog [PDF] | 1.2Mb | Download |
| Linde H12 / 16 / 18 / 20 Spare Parts Manual [PDF] | 1.2Mb | Download |
| Linde h25d h30d h35d 393 Operation and Maintenance Manual [PDF] | 8.5Mb | Download |
| Linde H25D, H30D, H35D Operator’s Manual [PDF] | 6.7Mb | Download |
| Linde H30d Manual [PDF] | 1.6Mb | Download |
| Linde H30D / H30T / H35D / H35T Linde IC Engined Truck Service Manual [PDF] | 11.6Mb | Download |
| Linde H50D, H 70 – 02 H 80 – 02, H 60 – 02, H 80 / 900 – 02, H 50 D, H 60 D, H 70 D, H 80 D, H 80 D / 900, H 50-02, H 60-02, H 70-02, H 80-02, H 80 / 900-02 Operator’s Manual [PDF] | 6.1Mb | Download |
| Linde H50D, H50D-03, H60D-03, H50T-03, H70D-03, H60T-03, H70T-03, H80D-03, H80T-03, H60D, H70D, H80D Service Manual [PDF] | 8.7Mb | Download |
| Linde H50T, H60T, H70T, H50D-02, H80T, H60 D-02, H50T-02, H60T-02, H70D-02, H80D-02, H70T-02, H80T-02 Service Manual [PDF] | 8.7Mb | Download |
| Linde K10, K13 Manual [PDF] | 1.4Mb | Download |
| Linde P200 Operator Manual [PDF] | 1.3Mb | Download |
| Linde R14 / R14HD / R16 / R16HD / R16N / R20 / R20N Series 115 Service Manual [PDF] | 10.9Mb | Download |
| Linde R14-R20 Technial Specifications Brochure [PDF] | 1.7Mb | Download |
| Linde Series115-03 Electrical Reach Truck Service Manual [PDF] | 23.7Mb | Download |
| Linde Stapler H 120, H 140, H 160 Operator Manual [PDF] | 3Mb | Download |
| Linde Stapler H 50, H 60, H 70 , H80 Operator Manual [PDF] | 944kb | Download |
| Linde T20 Pallet Truck Service Manual [PDF] | 6.1Mb | Download |
| Linde T20AP, T20SP, T24AP, T24SP Manual [PDF] | 4.3Mb | Download |
Linde forklifts from Germany are utilized both indoors and outdoors. The firm manufactures a variety of items using electric propulsion systems or piston motors with a forced start. The electrical circuit of the Linde H60D forklift is equipped with a rechargeable battery that enables the engine to start reliably in any weather.
Electric Linde Forklifts
The electric-powered Linde forklift is intended to handle weights between 1200 and 8000 kg. The rear axle of the light-duty trucks of the E12-20 series has two wheels. At the customer’s request, machines can be supplied with a reduced chassis, an expanded base, and various center of gravity positions. Electric forklifts are equipped with maintenance-free AC motors. The driving axle is fitted with disc brakes that are submerged in oil.
Four-wheeled electric E20-80 versions are fitted with hydrostatic steering, powered by a separate pump. The hoisting of the mast parts is driven and regulated by separate electric motors. The traction motors give a top speed of 20 km/h, and the computerized controller allows for step-less adjustment. Hydromechanical brakes are used for stopping.
To maximize productivity or runtime on a single charge, the operator can pick from various driving modes. In addition, the machine’s size allows it to fit into ordinary shipping containers.
A variable displacement axial piston pumping station generates 170 bar of hydraulic operating pressure for the machines’ hydraulics. The oil supply is contingent upon the loader’s modification and carrying capacity. Using electric drives has decreased the noise level at the operator’s station to 50 decibels (A).
Linde diesel and gas forklifts
Linde forklifts with piston power units have a maximum load capacity of 18,000 kg. The design of the cargo mast includes torsion-type dampers, which minimize the amount of unit deformation. The greatest benefit is produced when the load is lifted to a larger height. The hydraulics of the mast is linked to a separate, adjustable pump.
The machines are powered by Cummins or Deutz diesel engines with four or six cylinders and up to 175 horsepower. Volkswagen inline gasoline engines produce up to 92 horsepower. Original design hydrostatic transmission is employed to drive the drive wheels. A separate, engine-mounted hydraulic pump drives the transmission.
An adjustable operator’s seat is installed within the forklift’s open cab. The base is fitted with a vibration-reducing shock absorber. A protective barrier is built above the driver, supported by a sturdy frame. The movement is controlled by two pedals and a steering wheel, while the cargo mast is maneuvered using joysticks.
The 1401 and 1411 series machines, which are suited for outdoor usage, have enclosed cabs with a larger glass area. The cabin foundation is attached to the loader by means of rubber dampers.
Typical faults and repairs for Linde forklifts
Local dealers provide warranty repairs on Linde forklifts.
Common flaws:
- A driving power reduction indicates a low working fluid temperature or a clogged clutch mechanism. Heating the fluid and correcting stuck mechanisms constitutes repair.
- If the oil level is low or if the radiators are damaged, the temperature of the fluid will rise. Therefore, it is necessary to inspect the system, repair any broken components, and clear the lines of filth. In addition, it is not advised to operate at high engine speeds.
- The hubs will heat up during movement if the bearings are broken, or there is no lubricant. Defective components are replaced, tightening adjustments are made, and the oil supply is supplied.
- Noise emanating from the drive axle indicates worn components or increased differential mechanism clearance. Repair involves changing components, correcting the gears’ position, and adding oil.
- Due to worn or overtightened bearings, small space between the gears, and lack of lubrication, the differential case heats up. To restore performance, damaged nodes must be replaced, and the gap must be set.
Linde H50
Linde Forklift operator’s, electrical wiring diagrams, workshop, service and repair manuals, spare parts catalogs, error codes in PDF download
|
Title |
File Size |
Download Links |
|
Linde 1219 Technical Specifications [PDF] |
717.5kb |
Download |
|
Linde E 20-02, E 25-02, E 30-02, E 20 / 600-02, E 25 / 600-02, E 30 / |
7.6Mb |
Download |
|
Linde e16 Technical Specifications [PDF] |
529.8kb |
Download |
|
Linde E16C-03, E16P-03, E20P-03 Operating Manual [PDF] |
6.5Mb |
Download |
|
Linde E16C-03, E16P-03, E20P-03 Service Manual [PDF] |
13.7Mb |
Download |
|
Linde Electric Forklift E 20 / 25 / 30 Series 336 Service Manual |
1.7Mb |
Download |
|
Linde H12 14 1618 20 Spare Parts catalog [PDF] |
1.2Mb |
Download |
|
Linde H12 / 16 / 18 / 20 Spare Parts Manual [PDF] |
1.2Mb |
Download |
|
Linde h25d h30d h35d 393 Operation and Maintenance Manual |
9.1Mb |
Download |
|
Linde H25D, H30D, H35D Operator’s Manual [PDF] |
7.1Mb |
Download |
|
Linde H30d Manual [PDF] |
1.9Mb |
Download |
|
Linde H30D / H30T / H35D / H35T Linde IC Engined Truck Service Manual |
12Mb |
Download |
|
Linde H50D, H 70 — 02 H 80 — 02, H 60 — 02, H 80 / 900 — 02, H 50 D, |
6.4Mb |
Download |
|
Linde H50D, H50D-03, H60D-03, H50T-03, H70D-03, H60T-03, H70T-03, |
8.7Mb |
Download |
|
Linde H50T, H60T, H70T, H50D-02, H80T, H60 D-02, H50T-02, H60T-02, |
8.7Mb |
Download |
|
Linde K10, K13 Manual [PDF] |
1.6Mb |
Download |
|
Linde P200 Operator Manual [PDF] |
1.6Mb |
Download |
|
Linde R14 / R14HD / R16 / R16HD / R16N / R20 / R20N Series 115 |
11Mb |
Download |
|
Linde R14-R20 Technical Specifications Brochure [PDF] |
2.2Mb |
Download |
|
Linde Series115-03 Electrical Reach Truck Service Manual [PDF] |
24Mb |
Download |
|
Linde Stapler H 120, H 140, H 160 Operator Manual [PDF] |
3.6Mb |
Download |
|
Linde Stapler H 50, H 60, H 70 , H80 Operator Manual [PDF] |
940.5kb |
Download |
|
Linde T20 Pallet Truck Service Manual [PDF] |
6.2Mb |
Download |
|
Linde T20AP, T20SP, T24AP, T24SP Manual [PDF] |
4.5Mb |
Download |
The lifting equipment of the German company Linde is used to work in premises and in open areas. The company produces a wide range of products equipped with electric power plants
or piston engines with a forced launch. The composition of the Linde H60D loader circuit includes a battery that provides confident engine start in any conditions.
The Linde forklift, equipped with an electric motor, is designed to work with loads weighing from 1200 to 8000 kg. The low-loading machines of the E12-20 series are equipped with
paired wheels on the rear axle. At the request of the customer, it is possible to supply machines with a reduced chassis or with an elongated base and a different location of the center of
gravity. On electric loaders, alternating current engines that do not require maintenance are used. The leading bridge is equipped with disk brake mechanisms placed in an oil bath.
Electric models of the E20-80 with 4 wheels are equipped with hydrostatic steering control, with a drive from a separate pump. For the movement and management of lifting the mast sections,
separate electric motors are used. Pin -high motors provide speeds of up to 20 km/h, unavailable adjustment is carried out by a digital controller. For stopping, hydromechanical brakes are used.
Machine hydraulics have a working pressure of 170 bar created by an axial piston pumping station with adjustable performance. The supply of oil depends on the modification and carrying capacity
of the loader. The use of electric drives made it possible to reduce the noise level at the site of the operator to 50 dB (a).
Linde T20 SP Forklifts PDF User Guides and Manuals for Free Download: Found (1) Manuals for Linde T20 SP Device Model (Service Training)
More Forklifts Device Models:
-
Southworth
Stack-N-Go FPS3000-43NAS
June 24 2019Stack-N-Go Owner’s ManualFPS3000-43NASSOUTHWORTH PRODUCTS CORP. P.O. Box 1380, Portland, ME 04104-1380 Telephone: 800-743-1000 • 207-878-0700 Fax: 207-797-4734 www.SouthworthProducts.comModel: Serial Number: __________________________Date placed in se …
Stack-N-Go FPS3000-43NAS Forklifts, 37
-
morse
285A-GR
Copyright 2019 — Morse Mfg. Co., Inc. Form PL285A-GR (0818-0619) (Updated 20 Sep, 2019) 1The Specialist In Drum Handling EquipmentModel 285A-GRExtra Heavy-Duty [email protected] 103 Kuhn Rd.Syracuse, NY, 13208 U.S.A.morsedrum.com (315) 437-8475CONTENTSPageReceiving Procedures. . . . …
285A-GR Forklifts, 7
-
morse
285G-HD
MORSE MFG. CO., INC. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518Phone: 315-437-8475 • Fax: 315-437-1029 • Email: [email protected] • Webpage: morsedrum.comCopyright 2012 …
285G-HD Industrial Equipment, 6
-
jcb
RTFL 926
THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINERTFL — 926, 930, 940, 950Copyright © 2004 JCB SERVICE.All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permi …
RTFL 926 Forklifts, 200
Recommended Documentation: