Kyocera 2030 ошибка 3200 - TopOshibok.ru - решение и исправление самых разных ошибок

Модератор: vetal

Andreyak777 » Ср ноя 18, 2015 3:55 pm

То, что другие люди говорят обо мне, никак не характеризует меня. Зато отлично характеризует их.

Andreyak777

Избран тонером

FLHF » Чт ноя 19, 2015 10:41 am

FLHF

Осматривается

Andreyak777 » Чт ноя 19, 2015 1:49 pm

То, что другие люди говорят обо мне, никак не характеризует меня. Зато отлично характеризует их.

Andreyak777

Избран тонером

Kyocera FS-1120d индикатор «Нет бумаги»

vs-dos в форуме Принтеры, МФУ, факсы, копиры формата A4

11

15414

СТРОНЦИЙ

Вт ноя 02, 2021 2:24 pm
[SCANNER ERROR] Lamp Error Kyocera FS-1016

мастерчип в форуме Принтеры, МФУ, факсы, копиры формата A4

3

6735

Усатый Полосатый

Вс окт 28, 2018 11:08 pm
Kyocera 1035 «бледная» печать

srMax в форуме Принтеры, МФУ, факсы, копиры формата A4

2

14198

srMax

Пт янв 23, 2015 2:49 pm
Taskalfa 180 ошибка «Е» и «Встряхните картр. с тонером»

manik.76 в форуме Принтеры, МФУ, копиры формата A3

3

9931

dviz

Пн фев 20, 2017 1:35 pm
Kyocera Ecosys M2635dn «поворот» изображения

Искатель в форуме Принтеры, МФУ, факсы, копиры формата A4

10

6309

MatrixAgent

Ср апр 08, 2020 5:18 am

Вернуться в Принтеры, МФУ, факсы, копиры формата A4

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 73

Источник

Kyocera is a smartphone manufacturer that is known for making high-quality phones. The company has released several different phones, including the DuraForce Pro, the DuraForce DX and the DuraForce Pro 2. Their Kyocera Printer is also a popular device that is used by many people.

Kyocera has released a number of different phones and printers. They have also released several different devices that can be used to help improve the performance of your devices. However, there are many different errors that can occur when you try to use one of their devices.

Tech Support 24/7

Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

On this page, you will find more information about the most common causes and most relevant solutions for the Printer error ‘C3200’. Do you need help straight away? Visit our support page.

Error information

What causes the C3200 error?

The Kyocera documentation indicates that error code ‘C3200’ is caused by the following problem: «Exposure Lamp Problem Exposure lamp does not reach the input value threshold within 5 sec of commencing reading».

Do you think there is another cause for this error? Let others know in the comments.

How to solve Kyocera Printer error C3200

We’ve created a list of solutions which you can follow if you want to solve this Printer problem yourself. Do you need more help? Visit our support page if you need professional support with Printer right away.

Tech Support 24/7

Ask a Tech Specialist Online

Connect with the Expert via email, text or phone. Include photos, documents, and more. Get step-by-step instructions from verified Tech Support Specialists.

Verified solution

One of the most common errors is Kyocera c3200. This error occurs when you try to send an email or you try to send a fax. This can also happen because of a scan to email issue. This error can be annoying and frustrating because you cannot send an email or fax properly.

The problem can be caused by a problem with your device or it can be caused by an issue with your internet connection. However, it is possible that there is a virus on your computer that is preventing you from sending an email properly. To fix this error, you need to try a few solutions.

First of all, the error code c3200 relates to lamp or inverter issues. This error might have happened because your device is exposed to too much heat, too much light, or even too cold because of an air conditioner. To fix this error, you need to try a few solutions.

The first thing that you can do is check whether the optics are dirty. To do this, you need to remove the device from the printer and open it. Then, you need to remove the optics and clean them with a microfiber cloth. If the problem persists, you need to try another solution.

Another solution that you can try is to adjust the luminosity. To do this, press the Enter key, go to Settings > Display Description Setting range Initial setting. Then, you can adjust the data DP input light luminosity 0 to 8 1. You can increase and decrease the luminosity until the problem is fixed. Then, test printing or scanning.

If you still have issues with the program, then you can contact Kyocera Customer Support. The Kyocera Customer Support team can help you find a solution for the problem, and they can also help you find a solution for other issues. To contact Kyocera Customer Support, visit their official website. A Customer Support representative will help you solve the problem.

Have you found a solution yourself, but it is not in the list? Share your solution in the comments below.

Need more help?

Do you need more help?

Tech experts are ready to answer your questions.

Ask a question

Источник

Оборудование оснащено функцией самодиагностики. При обнаружении проблемы, аппарат блокируется, на дисплее отображается код вида С#### с указанием характера проблемы. Также появляется сообщение необходимости обслуживания. После устранения проблемы, ошибку можно сбросить тумблером питания, выключив и включив аппарат.

Код	Значение	Описание	Причина	Решение

C0030	FAX control PWB system error	Processing with the fax software was disabled due to a hardware problem.	Defective FAX control PWB.	Replace the FAX control PWB
C0070	FAX control PWB incompatible detection Error	Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted.	Defective fax software. Defective FAX control PWB.	Install the fax software. Replace the FAX control PWB
C0100	Backup memory device error		Defective flash memory. Defective control PWB.	Replace the control PWB
C0120	MAC address data error		Defective flash memory.	Replace the control PWB
C0130	Backup memory read/write error		Defective flash memory. Defective control PWB	Replace the control PWB
C0140	Backup memory data error		Defective flash memory. Defective control PWB.	Replace the control PWB
C0150	Control PWB EEPROM error	Detecting control PWB EEPROM (U17) communication error.	Improper installation control PWB EEPROM (U17). Defective control PWB. Data damage of control PWB EEPROM (U17).	Check the installation of the EEPROM (U17) and remedy if necessary. Replace the control PWB.
C0170	Billing counting error		Defective control PWB. Data damage of control PWB EEPROM (U17).	Replace the control PWB
C0180	Machine number mismatch	Machine number of main and engine does not match.	The main PWB or the engine PWB were exchanged. Data damage of control PWB EEPROM (U17).	U004 Setting the machine number.
C0420	Paper feeder communication error	Communication error between control PWB and optional paper feeder.	Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF mainPWB.	Follow installation instruction carefully again. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Replace the control PWB. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Replace the PF main PWB (Refer to the service manual for the paper feeder).
C0830	FAX control PWB flash program area checksum error	A checksum error occurred with the program of the FAX control PWB.	Defective fax software. Defective FAX control PWB.	Install the fax software. Replace the FAX control PWB
C0840	Faults of RTC	The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed.	Defective control PWB. The battery is disconnected from the control PWB.	Replace the control PWB. Check visually and remedy if necessary.
C0870	FAX control PWB to control PWB high capacity data transfer problem	High-capacity data transfer between the FAX control PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.	Improper installation FAX control PWB. Defective FAX control PWB or control PWB.	Reinstall the FAX control PWB. Replace the FAX control PWB or control PWB and check for correct operation.
C0920	Fax file system error	The backup data is not retained for file system abnormality of flash memory of the FAX control PWB.	Defective FAX control PWB.	Replace the FAX control PWB.
C2000	Main motor error	The main motor ready input is not given for 2 s during the main motor is ON.	Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Replace the main motor. Replace the control PWB.
C2610	PF paper feed motor error (paper feeder)	The PF paper feed motor of cassette 2 ready input is not given for 2 s during the PF paper feed motor is ON.	Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Replace the PF main motor. Replace the control PWB.
C2620	PF paper feed motor error (Paper feeder)	The PF paper feed motor of cassette 3 ready input is not given for 2 s during the PF paper feed motor is ON.	Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Replace the PF main motor (Refer to the service manual for the paper feeder). Replace the control PWB.
C3100	ISU home position errorr.		Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion. Defective home position sensor. Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion. Defective ISU motor.	Replace the image scanner unit (ISU). Reinsert the FFC. Also check for continuity within the FFC. If none, remedy or replace the FFC. Replace the home position sensor. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Replace the ISU motor.
C3200	Exposure lamp error	The exposure lamp is not turned on.	Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective harness between CCD PWB (YC3) and LED drive PWB (YC1), or improper connector insertion. Defective harness between LED drive PWB (YC2) and exposure lamp, or improper connector insertion. Defective exposure lamp.sensor. Defective LED drive PWB. Defective control PWB.	Reinsert the FFC. Also check for continuity within the FFC. If none, remedy or replace the FFC. Replace the image scanner unit (ISU). Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Replace the exposure lamp. Replace the LED drive PWB. Replace the control PWB.
C3300	AGC error	After AGC, correct input is not obtained at CCD.	Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective exposure lamp.sensor. Defective CCD PWB. Defective control PWB.	Replace the image scanner unit (ISU). Replace the exposure lamp. Replace the CCD PWB. Replace the control PWB.
C3500	CPU — ASIC (CCD PWB) communication error	An error code is detected.	Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective CCD PWB. Defective control PWB.	Replace the image scanner unit (ISU). Replace the CCD PWB. Replace the control PWB.
C4000	Polygon motor (laser scanner unit) error	The polygon motor ready input is not given for 6 s during the polygon motor is ON.	Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector har- ness. If none, remedy or replace the harness. Replace the laser scanner unit. Replace the control PWB.
C4200	BD error (laser scanner unit) error		BD sensor does not detect laser beam due to condensation on the polygon mirror. Defective laser scanner unit. Defective control PWB.	Turn machine power off for at least 30 minutes, then turn machine on again. If not cured, replace the laser scanner unit. Replace the control PWB.
C4700	VIDEO ASIC device error	Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively.	Defective connector cable or poor contact in the connector. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Replace the control PWB.
C6000	Broken Fuser heater wire	The fuser temperature does not rise after the Fuser heater has been turned on.	Poor contact in the fuser thermistor connector terminals. Poor contact in the Fuser heater connector terminals. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire.	Reinsert the connector. Replace the fuser unit.
C6020	Abnormally high fuser thermistor temperature	Fuser thermistor detects abnormally temperature. When the temperature of a fuser thermistor detects 195 °C or more at the time of heater OFF and 155 °C or more.	Shorted fuser thermistor. Defective control PWB.	Replace the fuser unit. Replace the control PWB.
C6030	Broken fuser thermistor wire	Input from fuser thermistor is 0 (A/D value).	Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire.	Reinsert the connector. Replace the fuser unit.
C6400	Zero cross signal error	The zero cross signal does not reach the control PWB for specified time.	Defective harness between high voltage PWB (CN202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (CN201). Defective power source PWB. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Reinsert the connector. Replace the power source PWB. Replace the control PWB.
C7990	Waste toner full	The waste toner sensor has detected that the waste toner reservoir (drum unit) is full.	Waste toner reservoir (drum unit) is full. Defective waste toner sensor. Defective control PWB.	Turn the power switch off/on to restart the machine. If the error is not resolved, replace the drum unit. Replace the waste toner sensor. Replace the control PWB.
F000	Control PWB — Operation panel PWB communication error		Defective harness between operation panel PWB (YC1) and control PWB (YC7), or improper connector insertion. motor is ON. Defective operation panel PWB. Defective control PWB.	Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Replace the operation panel PWB. Replace the control PWB.
F020	Control PWB RAM checksum error		Defective main memory (RAM) on the control PWB. Defective expanded memory (DIMM).	Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB. Replace the expanded memory (DIMM).
F040	Control PWB engine communication error	A communication error is detected.	Defective control PWB.	Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB.
F041	Control PWB — scanner PWB communication error	A communication error is detected.	Defective control PWB or scanner PWB.	Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB or scanner PWB.
F050	Control PWB engine checksum error		Some error may have occurred when downloading the firmware of the control PWB. Defective control PWB.	Download the firmware of the control PWB again. Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB.
F186	Control PWB video data control error		Defective control PWB.	Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB.