Оригинальные запчасти — окупят у вас сами себя. Дайте им шанс!
Коды ошибок
Коды ошибок (неисправностей) на технику Тадано.
Коды ошибок AT-141 — скачать.
Коды ошибок AT-145 — скачать.
Коды ошибок AT-180 — скачать.
Коды ошибок AT-250 — часть 1, часть 2
Коды ошибок TR-100M — скачать.
-
Bookmarks
Quick Links
80 Ton Capacity (72.6 Metric Tons)
HYDRAULIC ROUGH TERRAIN CRANE
GENERAL DIMENSIONS
(29.5 — 25 Tires)
Turning radius
4 wheel steer
2 wheel steer
Tail swing of counterweight
GR-800XL
DIMENSIONS
Feet
Meters
22′ 4″
6.8
39′ 1″
11.9
13′ 9″
4.19
Note : Dimension is with boom angle at -1.5 degree.
Specifications are subject to change without notice.
Related Manuals for Tadano GR-800XL
Summary of Contents for Tadano GR-800XL
-
Page 1
GR-800XL 80 Ton Capacity (72.6 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (29.5 — 25 Tires) Feet Meters Turning radius 4 wheel steer 22′ 4″ 2 wheel steer 39′ 1″… -
Page 2
CRANE SPECIFICATIONS BOOM WIRE ROPE — Non-rotating 3/4″ (19mm) 7×35 class. Five section full power synchronized telescoping boom, Breaking strength (Main and Aux): 72,800 lbs (33,000 kg) 39.4’~154.2′ (12.0m~47.0m), of round box construction with seven sheaves, 17-5/16″ (0.44m) root diameter, at boom head. HOOK BLOCKS The synchronization system consists of two telescope cylinders, 80 ton (72.6 metric ton) — 8 sheaves with swivel hook block and safety latch. -
Page 3
Tadano electronic LOAD MOMENT INDICATOR system TADANO AML-C monitors outrigger extended length and (AML-C) including: automatically programs the corresponding «RATED LIFTING Control lever lockout function CAPACITIES» table Boom position indicator Outrigger state indicator Operator’s right hand console includes transmission gear Boom angle / boom length / jib offset angle / jib length / load selector and sight level bubble. -
Page 4
— Winch over-unwinding prevention — Fenders — Boom angle indicator — Air dryer — Tadano electronic load moment indicator system (AML-C) — Water separator with filter(high filtration) — Outrigger extension length detector — Engine over-run alarm — Electronic crane monitoring system… -
Page 5
GR-800XL WORKING RANGE CHART… -
Page 6
GR-800XL WORKING RANGE CHART… -
Page 7
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS FULLY EXTENDED 23′ 11-3/8″(7.3m) SPREAD ROTATION 39.4′ 53.7′ 68.1′ (20.8m) 82.4′ (25.1m) 96.8′ (29.5m) 111.1′ (33.9m) 125.5′ (38.3m) 139.8′ (42.6m) 154.2′ (12m) C (16.4m) C C (47m) 160,000 102,700 160,000 102,700 90,200… -
Page 8
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS FULLY EXTENDED 23′ 11-3/8″(7.3m) SPREAD ROTATION 154.2′ (47.0m) Boom + 33.2′ (10.1m) Jib 154.2′ (47.0m) Boom + 58.1′ (17.7m) Jib offset offset offset offset offset offset 37.8′ 10,800 51.5′ 10,800 58.8′ 9,400 45.8’… -
Page 9
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MID EXTENDED 21′ 11-3/4″(6.7m) SPREAD ROTATION 39.4′ 53.7′ 68.1′ (20.8m) 82.4′ (25.1m) 96.8′ (29.5m) 111.1′ (33.9m) 125.5′ (38.3m) 139.8′ (42.6m) 154.2′ (12m) C (16.4m) C C (47m) 160,000 102,700 160,000 102,700 90,200… -
Page 10
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MID EXTENDED 21′ 11-3/4″(6.7m) SPREAD ROTATION 154.2′ (47.0m) Boom + 33.2′ (10.1m) Jib 154.2′ (47.0m) Boom + 58.1′ (17.7m) Jib offset offset offset offset offset offset 37.8′ 10,800 51.5′ 10,800 58.8′ 9,400 45.8’… -
Page 11
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MID EXTENDED 18′ 1/2″(5.5m) SPREAD ROTATION 39.4′ 53.7′ 68.1′ (20.8m) 82.4′ (25.1m) 96.8′ (29.5m) 111.1′ (33.9m) 125.5′ (38.3m) 139.8′ (42.6m) 154.2′ (12m) C (16.4m) C C (47m) 160,000 102,700 160,000 102,700 90,200… -
Page 12
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MID EXTENDED 18′ 1/2″(5.5m) SPREAD ROTATION 154.2′ (47.0m) Boom + 33.2′ (10.1m) Jib 154.2′ (47.0m) Boom + 58.1′ (17.7m) Jib offset offset offset offset offset offset 37.8′ 10,800 51.5′ 10,800 58.8′ 9,400 45.8’… -
Page 13
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON OUTRIGGERS MIN EXTENDED 8′ 10-5/16″(2.7m) SPREAD ROTATION 39.4′ 53.7′ 68.1′ (20.8m) 82.4′ (25.1m) 96.8′ (29.5m) 111.1′ (33.9m) 125.5′ (38.3m) 139.8′ (42.6m) 154.2′ (12m) C (16.4m) C C (47m) 143,900 102,700 94,900 93,000 90,200… -
Page 14
1. RATED LIFTING CAPACITIES apply only to the machine as 11. Load per line should not exceed 14,600 lbs. (6,600kg) for originally manufactured and normally equipped by TADANO main hoist and auxiliary hoist. LTD. Modifications to the machine or use of optional 12. -
Page 15
GR-800XL RATED LIFTING CAPACITIES (IN POUNDS) ON RUBBER Stationary Creep Over Front Over Front Rotation 39.4′ 68.1′ 96.8′ 39.4′ 68.1′ 96.8′ 39.4′ 68.1′ 96.8′ (12m) (20.8m) (29.5m) (12m) (20.8m) (29.5m) (12m) (20.8m) (29.5m) 60,000 38,000 45,000 49,600 28,500 36,600 20,000… -
Page 16
-110 -330 -149 6. Removable counterweight [self-removable] -22,000 9,350 -31,350 -9,979 4,240 -14,219 (with Auxiliary hoist & wire rope) TADANO AMERICA Corporation 4242 West Greens Road Houston, Texas, 77066 U.S.A. Phone: (281) 869-0030 Fax: (281) 869-0040 www.tadanoamerica.com Form No. TAC-GR-800-3-00311-04042017…
Tadano Fault Codes DTC
Tadano Fault Codes DTC
Tadano Fault Codes.pdf
Adobe Acrobat Document
42.4 KB
TADANO Cranes Fault Codes list DTC
01 Failure in the main speed sensor,
l. Gears in transmission are not shifted with the gearshift leaver in «D».
2. Speedometer does not work
02 Failure In the sub-speed sensor.
03 Failure in main speed sensor (when gearshift is in «N»)
04 Failure In outrigger data (FL)
05 Failure in outrigger data (FR)
06 Failure in outrigger data (RL)
07 Failure in outrigger data (RR)
08 Abnormal torque converter pressure data
09 Abnormal air pressure data
10 Failure in accelerator sonsor 1 data
11 Failure in accelerator sensor 2 data
12 Failure in idle volume data
13 Failure in the upper A/D conversion
15 Upper unit RAM check error
16 Lower unit RAM check error
17 Failure in the lower A/D conversion
18 Upper unit ROM check error
19 Lower unt ROM check error
24 Failure in the transmission input signal combination (Actual transmission and gearshift lever position are not matched).
25 Failure in the transmission input signal.
27 Failure in steering more input signal combination
28 Interrupted communication from STME to lower unit
29 Faulty communication from STM-E to lower unit
30 Input value from main speed sensor is unusually high.
1. Speedometer indicates abnormally high speed.
2. Over speed warning buzzer sounds continuously.
31 Interrupted communication from lower to upper unit
32 Faulty communication from lower to upper unit
33 Interrupted communication from AML to upper unit
34 Failure in RAM for main speed data
35 Faulty communication from AML to upper unit
38 Interrupted communication from meter controller to upper unit
39 Faulty communication from meter controller to upper unit
48 ECU failure malfunction (it is not possible to run) DIAG 1 (red) in lower unit relay box lights
49 ECU warning malfunction (it is possible to run) DIAG 2 (amber) in lower unit relay box lights
93 Faulty RY4 output Monitored data ON while output data is OFF
94 Faulty RY5 output Monitored data ON while output data is OFF
95 Faulty RY6 output Monitored data ON while output data is OFF
96 Faulty RY7 output Monitored data ON while output data is OFF
97 Faulty RY8 output Monitored data ON while output data is OFF
98 Faulty RY1 output Monitored data OFF while output data is ON
99 Faulty RY2 output Monitored data OFF while output data is ON
9A Faulty RY3 output Monitored data OFF while output data is ON
9b Faulty RY4 output Monitored data OFF while output data is ON
9C Faulty RY5 output Monitored data OFF while output data is ON
9d Faulty RY6 output Monitored data OFF while output data is ON
9E Faulty RY7 output Monitored data OFF while output data is ON
9F Faulty RY8 output Monitored data OFF while output data is ON AO Faulty
RY9 output Monitored data ON while output data is OFF A1 Faulty
RY10 output Monitored data ON while output data is OFF A2 Faulty
RY11 output Monitored data ON while output data is OFF A3 Faulty
RY12 output Monitored data ON while output data is OFF A4 Faulty
RY13 output Monitored data ON while output data is OFF A5 Faulty
RY14 output Monitored data ON while output data is OFF A6 Faulty
RY15 output Monitored data ON while output data is OFF A7 Faulty
RY16 output Monitored data ON while output data is OFF A8 Faulty
RY9 output Monitored data OFF while output data is ON.
Tadano truck crane: service manuals, operators manuals, faults, error codes list in PDF, repair manuals free download.
|
Title |
File Size |
Download link |
|
Tadano AML-C (Load Moment Indicator) Service Manual.pdf |
5.4Mb |
Download |
|
Tadano ATF 220G-5 — Operating, Service and Maintenance Manual.pdf |
30.1Mb |
Download |
|
Tadano Faun Multimedia Service Repair Manual.exe |
17.6Mb |
Download |
|
Tadano Gr-700EX Operators Maintenance Manual.pdf |
21.7Mb |
Download |
|
Tadano GR-700EX-1, GR-700EXL-1 Service Manual.pdf |
22.4Mb |
Download |
|
Tadano GT-550E-2 Operators Maintenance Manual.pdf |
5.2Mb |
Download |
|
Tadano GT-550E-2 Truck Crane Operation and Service Manual.pdf |
19.5Mb |
Download |
|
Tadano MKAT-40 Service & Repair Manual.pdf |
12.8Mb |
Download |
|
Tadano R561-Z101 Service Manual.pdf |
10.4Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual — Part 2.pdf |
9.9Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual.pdf |
9.9Mb |
Download |
|
Tadano TR-280XL, TR-200M-4, TR-300XL, TR-250M-4, TR-350XL, TR-350M-1, TR-450XL, TR-500M-1, TR-600XL Service Manual (Multiplex data |
4.3Mb |
Download |
|
Tadano TR250M — Steps to Retrive the Program I.D. & Data I.D. Number.pdf |
565.1kb |
Download |
|
Tadano TR250M-3 — Parts Catalog.pdf |
159.9Mb |
Download |
|
Title |
File Size |
Download link |
|
Tadano AT-141 Error codes (faults).pdf |
404.5kb |
Download |
|
Tadano AT-145 Error codes (faults).pdf |
661.5kb |
Download |
|
Tadano AT-180 Error codes (faults).pdf |
853.2kb |
Download |
|
Tadano AT-250TG Fault codes list Part 2.jpg |
172.1kb |
Download |
|
Tadano AT-250TG Fault codes list.jpg |
204.7kb |
Download |
|
TADANO Cranes Fault Codes list.pdf |
136.9kb |
Download |
|
Tadano GR-300E-1, GR-300E-2, GR-500E-2, GR-550E-1, GR-600E-2, GR-700E-1, GR-750-2, GR-800E-2 fault codes list.pdf |
121.5kb |
Download |
|
Tadano TR-100M Error codes (faults).pdf — See also: Tadano TR-100M Error Codes list |
441.9kb |
Download |
|
Title |
File Size |
Download link |
|
ATF 130G-5.pdf |
5Mb |
Download |
|
ATF 50G-3 Bluetec.pdf |
4.9Mb |
Download |
|
ATF 90G 4(Metric).pdf |
16Mb |
Download |
|
ATF-1500XL.pdf |
3.9Mb |
Download |
|
ATF-220G-5(2).pdf |
7.3Mb |
Download |
|
GR-1000XL.pdf |
386.9kb |
Download |
|
GR-1100EX.pdf |
1.1Mb |
Download |
|
GR-1200XL.pdf |
720.7kb |
Download |
|
GR-130EX.pdf |
426.1kb |
Download |
|
GR-1450EX.pdf |
1021kb |
Download |
|
GR-1600XL.pdf |
438.3kb |
Download |
|
GR-300EX.pdf |
321.8kb |
Download |
|
GR-500E-2-00102_EX-02.pdf |
817.8kb |
Download |
|
GR-500EX.pdf |
1.1Mb |
Download |
|
GR-500EXL (Left-hand drive).pdf |
1.8Mb |
Download |
|
GR-500EXL (Right-hand drive).pdf |
2.1Mb |
Download |
|
GR-500EXS.pdf |
1.1Mb |
Download |
|
GR-500XL.pdf |
364.9kb |
Download |
|
GR-600EX.pdf |
775.5kb |
Download |
|
GR-700E-1-00211_EU-32.pdf |
372.6kb |
Download |
|
GR-750XL.pdf |
363.6kb |
Download |
|
GR-800EX.pdf |
659.6kb |
Download |
|
TG500E-3 50T Load Chart.pdf |
919.4kb |
Download |
|
TR150 XL-4.pdf |
768kb |
Download |
|
TR-160M.pdf |
1.3Mb |
Download |
|
TR-200M-5-00101.pdf |
933.3kb |
Download |
|
TR-300EX.pdf |
341.7kb |
Download |
Tadano Faun Group — a group of engineering companies managed by Tadano Ltd.
The head office is in Japan. The main production sites are located in Japan and Germany.
Tadano Ltd. was founded on August 24, 1948. It is considered one of the largest manufacturers of lifting equipment and machinery.
In 1955, the company introduced the first Japanese mobile crane with a lifting capacity of 2 tons, which received the OC-2 index.
1960 Started the export of cranes in Indonesia.
1970 The TR-150 off-road crane with a lifting capacity of 15 tons appears in the Tadano product line.
1973 Tadano International (Europe), the first overseas branch was opened in Holland.
1990 Production of the crane TG-3600M with a maximum lifting capacity of 360 tons.
In the same year, Tadano Ltd. acquires the German company Faun AG. Faun AG has been leading its history since 1845 and specialized in the construction of truck cranes.
1991 Founded Tadano Faun GmbH.
1996 The certificate of international quality ICO 9001 was obtained. In the same year, the production of cranes of various types exceeded 300 thousand units.
1998. The Tadano AR-5500M truck crane was presented — the most powerful of the Japanese-made machines, with a payload of more than 550 tons.
The company specializes in the manufacture of truck cranes, crawler cranes with a telescopic boom, boring crane machines, off-road cranes, loader cranes, car lifts, lifting
platforms, mast lifts. Products are exported to 120 countries.
ТАДАНО GR800EX 80t коды и ошибки все 🧐Подробнее
ТАДАНО GR800 EX 80t знакомтесь кнопки и управление.Подробнее
ТАДАНО GR800 EX 80t знакомство с приборами.Подробнее
Как проверить контроллер (потенциометр) Тадано TadanoПодробнее
Ошибки Тадано Tadano одна из причин, ошибка 70, замена косы компьютера ТаданоПодробнее
Глючит пульт Тадано , лебёдка сама заматывает. Ошибки 20 21 22 23 30 31 32 33 как сопутствующие.Подробнее
ТАДАНО GR800 EX 80t компьютер и его способности.Подробнее
пульт тадано перестали работать все режимы кроме газаПодробнее
TADANO GR800EX Просто едем без лап. Спецпартнер.рфПодробнее
Решили проблему с отсутствием предохранительного клапана на крановой установке ТаданоПодробнее
HOW TO FIX ERROR CODE W0018 AND W0019 OF GR-500EX/XL,GR-600EX,GR-700EX/EXL,GR-800EX ( TADANO )Подробнее
Последняя ошибка в электронике осилена на стреле TADANO ZE360. Нейтраль рычага управления опоройПодробнее
Тадано стрела не поднимает груз одна из причин, как почистить клапан регулировки давления в системеПодробнее
Коды неисправностей. Как их расшифровать.Подробнее
Как сломать стрелу манипулятора,видео урок как делать не надоПодробнее
