Оригинальные запчасти — окупят у вас сами себя. Дайте им шанс!
Коды ошибок
Коды ошибок (неисправностей) на технику Тадано.
Коды ошибок AT-141 — скачать.
Коды ошибок AT-145 — скачать.
Коды ошибок AT-180 — скачать.
Коды ошибок AT-250 — часть 1, часть 2
Коды ошибок TR-100M — скачать.
Оригинальные запчасти — окупят у вас сами себя. Дайте им шанс!
Коды ошибок
Коды ошибок (неисправностей) на технику Тадано.
Коды ошибок AT-141 — скачать.
Коды ошибок AT-145 — скачать.
Коды ошибок AT-180 — скачать.
Коды ошибок AT-250 — часть 1, часть 2
Коды ошибок TR-100M — скачать.
Tadano Fault Codes DTC
Tadano Fault Codes DTC
Tadano Fault Codes.pdf
Adobe Acrobat Document
42.4 KB
TADANO Cranes Fault Codes list DTC
01 Failure in the main speed sensor,
l. Gears in transmission are not shifted with the gearshift leaver in «D».
2. Speedometer does not work
02 Failure In the sub-speed sensor.
03 Failure in main speed sensor (when gearshift is in «N»)
04 Failure In outrigger data (FL)
05 Failure in outrigger data (FR)
06 Failure in outrigger data (RL)
07 Failure in outrigger data (RR)
08 Abnormal torque converter pressure data
09 Abnormal air pressure data
10 Failure in accelerator sonsor 1 data
11 Failure in accelerator sensor 2 data
12 Failure in idle volume data
13 Failure in the upper A/D conversion
15 Upper unit RAM check error
16 Lower unit RAM check error
17 Failure in the lower A/D conversion
18 Upper unit ROM check error
19 Lower unt ROM check error
24 Failure in the transmission input signal combination (Actual transmission and gearshift lever position are not matched).
25 Failure in the transmission input signal.
27 Failure in steering more input signal combination
28 Interrupted communication from STME to lower unit
29 Faulty communication from STM-E to lower unit
30 Input value from main speed sensor is unusually high.
1. Speedometer indicates abnormally high speed.
2. Over speed warning buzzer sounds continuously.
31 Interrupted communication from lower to upper unit
32 Faulty communication from lower to upper unit
33 Interrupted communication from AML to upper unit
34 Failure in RAM for main speed data
35 Faulty communication from AML to upper unit
38 Interrupted communication from meter controller to upper unit
39 Faulty communication from meter controller to upper unit
48 ECU failure malfunction (it is not possible to run) DIAG 1 (red) in lower unit relay box lights
49 ECU warning malfunction (it is possible to run) DIAG 2 (amber) in lower unit relay box lights
93 Faulty RY4 output Monitored data ON while output data is OFF
94 Faulty RY5 output Monitored data ON while output data is OFF
95 Faulty RY6 output Monitored data ON while output data is OFF
96 Faulty RY7 output Monitored data ON while output data is OFF
97 Faulty RY8 output Monitored data ON while output data is OFF
98 Faulty RY1 output Monitored data OFF while output data is ON
99 Faulty RY2 output Monitored data OFF while output data is ON
9A Faulty RY3 output Monitored data OFF while output data is ON
9b Faulty RY4 output Monitored data OFF while output data is ON
9C Faulty RY5 output Monitored data OFF while output data is ON
9d Faulty RY6 output Monitored data OFF while output data is ON
9E Faulty RY7 output Monitored data OFF while output data is ON
9F Faulty RY8 output Monitored data OFF while output data is ON AO Faulty
RY9 output Monitored data ON while output data is OFF A1 Faulty
RY10 output Monitored data ON while output data is OFF A2 Faulty
RY11 output Monitored data ON while output data is OFF A3 Faulty
RY12 output Monitored data ON while output data is OFF A4 Faulty
RY13 output Monitored data ON while output data is OFF A5 Faulty
RY14 output Monitored data ON while output data is OFF A6 Faulty
RY15 output Monitored data ON while output data is OFF A7 Faulty
RY16 output Monitored data ON while output data is OFF A8 Faulty
RY9 output Monitored data OFF while output data is ON.
Foreword
This service manual describes the composition of the Model GR-500EXL-3 rough terrain crane, its adjustment
methods and hydraulic and electric circuit diagrams.
This service manual applies to the cranes with the specification numbers given below. Check the specification
number on the nameplate of your crane.
Read the separate operation and maintenance manual and the parts catalog for repair and maintenance of the
crane in conjunction with this manual. If the parts needs to be replaced, check the disassemble units and sales
units in the parts catalog before replacing them.
1. Applicable spec. and serial number
Separate service manual
1
General Cautions
2
Automatic Moment Limiter (AML-C)
3
Data Transmitter (DCU2 and VCU)
Torque Converter (EXEDY)
4
Transmission (EXEDY)
5
Driving Axle (KESSLER)
Please note that, for product improvement, some changes which are not
covered in this manual may have been incorporated in the machine.
And please note that this manual may cover the functions and equipment
which are not equipped with your machine.
Please check your actual machine for repair and maintenance.
Foreword
Spec. No.
GR-500E-3-00102
Separate Service Manual
Applicable serial number
541100—
Publication No.
WA01-0121E
to be published
to be published
to be published
to be published
1
WA04-4610E
18.04.2013 16:35
#21
ошибка 59 на 500 унике
я вверху задавал вопрос оказалась была нажата аварийная кнопка на кму которая закрывается крышечкой как на самолете запуск ракет)))
Последний раз редактировалось xeg; 18.04.2013 в 16:51.
фотон-5163 10т+кму китай 5 2011г.фусо 617 5т+тадано 1994г 3т.хундай 72 эвик-сдвижка
07.03.2019 05:47
#37
Сообщение от Алексей Аи
Решили проблему
это ответ или вопрос? что нашли?
фотон-5163 10т+кму китай 5 2011г.фусо 617 5т+тадано 1994г 3т.хундай 72 эвик-сдвижка
07.03.2019 09:02
#38
Сообщение от Алексей Аи
Решили проблему
я вот прочел что парни ищут значение кода.решил поискать и хороший человек мне 81 ошибку подробно описал)))к томуже я ужнал значение ошибки 70 и 71 а 59 давно всем известна.могу еще глянуть ошибки подгазовки там достаточно штекер выткнуть,видел какие но подзабыл
https://www.youtube.com/ ответ в каментах
и вот на будующее.чел молодец https://www.youtube.com/watch?v=XrvswyW-iQw
Последний раз редактировалось xeg; 07.03.2019 в 09:12.
фотон-5163 10т+кму китай 5 2011г.фусо 617 5т+тадано 1994г 3т.хундай 72 эвик-сдвижка
Tadano truck crane: service manuals, operators manuals, faults, error codes list in PDF, repair manuals free download.
|
Title |
File Size |
Download link |
|
Tadano AML-C (Load Moment Indicator) Service Manual.pdf |
5.4Mb |
Download |
|
Tadano ATF 220G-5 — Operating, Service and Maintenance Manual.pdf |
30.1Mb |
Download |
|
Tadano Faun Multimedia Service Repair Manual.exe |
17.6Mb |
Download |
|
Tadano Gr-700EX Operators Maintenance Manual.pdf |
21.7Mb |
Download |
|
Tadano GR-700EX-1, GR-700EXL-1 Service Manual.pdf |
22.4Mb |
Download |
|
Tadano GT-550E-2 Operators Maintenance Manual.pdf |
5.2Mb |
Download |
|
Tadano GT-550E-2 Truck Crane Operation and Service Manual.pdf |
19.5Mb |
Download |
|
Tadano MKAT-40 Service & Repair Manual.pdf |
12.8Mb |
Download |
|
Tadano R561-Z101 Service Manual.pdf |
10.4Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual — Part 2.pdf |
9.9Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual.pdf |
9.9Mb |
Download |
|
Tadano TR-280XL, TR-200M-4, TR-300XL, TR-250M-4, TR-350XL, TR-350M-1, TR-450XL, TR-500M-1, TR-600XL Service Manual (Multiplex data |
4.3Mb |
Download |
|
Tadano TR250M — Steps to Retrive the Program I.D. & Data I.D. Number.pdf |
565.1kb |
Download |
|
Tadano TR250M-3 — Parts Catalog.pdf |
159.9Mb |
Download |
|
Title |
File Size |
Download link |
|
Tadano AT-141 Error codes (faults).pdf |
404.5kb |
Download |
|
Tadano AT-145 Error codes (faults).pdf |
661.5kb |
Download |
|
Tadano AT-180 Error codes (faults).pdf |
853.2kb |
Download |
|
Tadano AT-250TG Fault codes list Part 2.jpg |
172.1kb |
Download |
|
Tadano AT-250TG Fault codes list.jpg |
204.7kb |
Download |
|
TADANO Cranes Fault Codes list.pdf |
136.9kb |
Download |
|
Tadano GR-300E-1, GR-300E-2, GR-500E-2, GR-550E-1, GR-600E-2, GR-700E-1, GR-750-2, GR-800E-2 fault codes list.pdf |
121.5kb |
Download |
|
Tadano TR-100M Error codes (faults).pdf — See also: Tadano TR-100M Error Codes list |
441.9kb |
Download |
|
Title |
File Size |
Download link |
|
ATF 130G-5.pdf |
5Mb |
Download |
|
ATF 50G-3 Bluetec.pdf |
4.9Mb |
Download |
|
ATF 90G 4(Metric).pdf |
16Mb |
Download |
|
ATF-1500XL.pdf |
3.9Mb |
Download |
|
ATF-220G-5(2).pdf |
7.3Mb |
Download |
|
GR-1000XL.pdf |
386.9kb |
Download |
|
GR-1100EX.pdf |
1.1Mb |
Download |
|
GR-1200XL.pdf |
720.7kb |
Download |
|
GR-130EX.pdf |
426.1kb |
Download |
|
GR-1450EX.pdf |
1021kb |
Download |
|
GR-1600XL.pdf |
438.3kb |
Download |
|
GR-300EX.pdf |
321.8kb |
Download |
|
GR-500E-2-00102_EX-02.pdf |
817.8kb |
Download |
|
GR-500EX.pdf |
1.1Mb |
Download |
|
GR-500EXL (Left-hand drive).pdf |
1.8Mb |
Download |
|
GR-500EXL (Right-hand drive).pdf |
2.1Mb |
Download |
|
GR-500EXS.pdf |
1.1Mb |
Download |
|
GR-500XL.pdf |
364.9kb |
Download |
|
GR-600EX.pdf |
775.5kb |
Download |
|
GR-700E-1-00211_EU-32.pdf |
372.6kb |
Download |
|
GR-750XL.pdf |
363.6kb |
Download |
|
GR-800EX.pdf |
659.6kb |
Download |
|
TG500E-3 50T Load Chart.pdf |
919.4kb |
Download |
|
TR150 XL-4.pdf |
768kb |
Download |
|
TR-160M.pdf |
1.3Mb |
Download |
|
TR-200M-5-00101.pdf |
933.3kb |
Download |
|
TR-300EX.pdf |
341.7kb |
Download |
Tadano Faun Group — a group of engineering companies managed by Tadano Ltd.
The head office is in Japan. The main production sites are located in Japan and Germany.
Tadano Ltd. was founded on August 24, 1948. It is considered one of the largest manufacturers of lifting equipment and machinery.
In 1955, the company introduced the first Japanese mobile crane with a lifting capacity of 2 tons, which received the OC-2 index.
1960 Started the export of cranes in Indonesia.
1970 The TR-150 off-road crane with a lifting capacity of 15 tons appears in the Tadano product line.
1973 Tadano International (Europe), the first overseas branch was opened in Holland.
1990 Production of the crane TG-3600M with a maximum lifting capacity of 360 tons.
In the same year, Tadano Ltd. acquires the German company Faun AG. Faun AG has been leading its history since 1845 and specialized in the construction of truck cranes.
1991 Founded Tadano Faun GmbH.
1996 The certificate of international quality ICO 9001 was obtained. In the same year, the production of cranes of various types exceeded 300 thousand units.
1998. The Tadano AR-5500M truck crane was presented — the most powerful of the Japanese-made machines, with a payload of more than 550 tons.
The company specializes in the manufacture of truck cranes, crawler cranes with a telescopic boom, boring crane machines, off-road cranes, loader cranes, car lifts, lifting
platforms, mast lifts. Products are exported to 120 countries.
Tadano Fault Codes DTC
Tadano Fault Codes DTC
Tadano Fault Codes.pdf
Adobe Acrobat Document
42.4 KB
TADANO Cranes Fault Codes list DTC
01 Failure in the main speed sensor,
l. Gears in transmission are not shifted with the gearshift leaver in «D».
2. Speedometer does not work
02 Failure In the sub-speed sensor.
03 Failure in main speed sensor (when gearshift is in «N»)
04 Failure In outrigger data (FL)
05 Failure in outrigger data (FR)
06 Failure in outrigger data (RL)
07 Failure in outrigger data (RR)
08 Abnormal torque converter pressure data
09 Abnormal air pressure data
10 Failure in accelerator sonsor 1 data
11 Failure in accelerator sensor 2 data
12 Failure in idle volume data
13 Failure in the upper A/D conversion
15 Upper unit RAM check error
16 Lower unit RAM check error
17 Failure in the lower A/D conversion
18 Upper unit ROM check error
19 Lower unt ROM check error
24 Failure in the transmission input signal combination (Actual transmission and gearshift lever position are not matched).
25 Failure in the transmission input signal.
27 Failure in steering more input signal combination
28 Interrupted communication from STME to lower unit
29 Faulty communication from STM-E to lower unit
30 Input value from main speed sensor is unusually high.
1. Speedometer indicates abnormally high speed.
2. Over speed warning buzzer sounds continuously.
31 Interrupted communication from lower to upper unit
32 Faulty communication from lower to upper unit
33 Interrupted communication from AML to upper unit
34 Failure in RAM for main speed data
35 Faulty communication from AML to upper unit
38 Interrupted communication from meter controller to upper unit
39 Faulty communication from meter controller to upper unit
48 ECU failure malfunction (it is not possible to run) DIAG 1 (red) in lower unit relay box lights
49 ECU warning malfunction (it is possible to run) DIAG 2 (amber) in lower unit relay box lights
93 Faulty RY4 output Monitored data ON while output data is OFF
94 Faulty RY5 output Monitored data ON while output data is OFF
95 Faulty RY6 output Monitored data ON while output data is OFF
96 Faulty RY7 output Monitored data ON while output data is OFF
97 Faulty RY8 output Monitored data ON while output data is OFF
98 Faulty RY1 output Monitored data OFF while output data is ON
99 Faulty RY2 output Monitored data OFF while output data is ON
9A Faulty RY3 output Monitored data OFF while output data is ON
9b Faulty RY4 output Monitored data OFF while output data is ON
9C Faulty RY5 output Monitored data OFF while output data is ON
9d Faulty RY6 output Monitored data OFF while output data is ON
9E Faulty RY7 output Monitored data OFF while output data is ON
9F Faulty RY8 output Monitored data OFF while output data is ON AO Faulty
RY9 output Monitored data ON while output data is OFF A1 Faulty
RY10 output Monitored data ON while output data is OFF A2 Faulty
RY11 output Monitored data ON while output data is OFF A3 Faulty
RY12 output Monitored data ON while output data is OFF A4 Faulty
RY13 output Monitored data ON while output data is OFF A5 Faulty
RY14 output Monitored data ON while output data is OFF A6 Faulty
RY15 output Monitored data ON while output data is OFF A7 Faulty
RY16 output Monitored data ON while output data is OFF A8 Faulty
RY9 output Monitored data OFF while output data is ON.
Рекомендованные сообщения
Tadano111
Опубликовано: 16 июня
-
- Жалоба
- Поделиться
Здравствуйте, может у кого есть коды ошибок на TadanoGR500-EX? Уже весь интернет перелопачен — ничего…..
А именно ошибка 2003…
Ссылка на комментарий
Создайте аккаунт или войдите в него для комментирования
Вы должны быть пользователем, чтобы оставить комментарий
Создать аккаунт
Зарегистрируйтесь для получения аккаунта. Это просто!
Зарегистрировать аккаунт
Войти
Уже зарегистрированы? Войдите здесь.
Войти сейчас
Подписчики
1
Foreword
This service manual describes the composition of the Model GR-500EXL-3 rough terrain crane, its adjustment
methods and hydraulic and electric circuit diagrams.
This service manual applies to the cranes with the specification numbers given below. Check the specification
number on the nameplate of your crane.
Read the separate operation and maintenance manual and the parts catalog for repair and maintenance of the
crane in conjunction with this manual. If the parts needs to be replaced, check the disassemble units and sales
units in the parts catalog before replacing them.
1. Applicable spec. and serial number
Separate service manual
1
General Cautions
2
Automatic Moment Limiter (AML-C)
3
Data Transmitter (DCU2 and VCU)
Torque Converter (EXEDY)
4
Transmission (EXEDY)
5
Driving Axle (KESSLER)
Please note that, for product improvement, some changes which are not
covered in this manual may have been incorporated in the machine.
And please note that this manual may cover the functions and equipment
which are not equipped with your machine.
Please check your actual machine for repair and maintenance.
Foreword
Spec. No.
GR-500E-3-00102
Separate Service Manual
Applicable serial number
541100—
Publication No.
WA01-0121E
to be published
to be published
to be published
to be published
1
WA04-4610E
Полезный тюнинг от RollingTruck для грузовых автомобилей: фары, дефлекторы, грязеотсекатели, расширители арок и многое другое
Модераторы: Иваныч, андрей 0761
Информация
-= Что есть ещё по теме кранов-манипуляторов? Во-первых, Крано.ру — форум по кранам БЕЗ РЕГИСТРАЦИИ, а во-вторых — Эвакуаторщики.ру — молодое сообщество владельцев и водителей ЭВАКУАТОРОВ =-
-
Автор темы
Viktoriyagap
- Новичок
- Всего сообщений: 1
- Зарегистрирован: 14.06.2023
- Авто: Tadano GR500-EX
- Откуда: Sakhalin
Tadano GR500-EX
Здравствуйте, может у кого есть коды ошибок на Tadano GR500-EX? Уже весь интернет перелопачен — ничего…..
-
АГРО 47
- Отрыв
- Всего сообщений: 71
- Зарегистрирован: 21.10.2012
- Авто: Ford Explorer, 1992, АКПП
- Откуда: Выборг и Питер
- Возраст: 53
Re: Tadano GR500-EX
Сообщение
АГРО 47 »
Я б Вам предложил бы на КМУ ФОРУМ с этим вопросом. Уж там то точно есть спецы по китайским стрелам: https://kmuclub.ru/forum/13-tadano/
Если рассудок и жизнь дороги вам, держитесь подальше от торфяных болот… (А. Конан-Дойл)
Для отправки ответа, комментария или отзыва вам необходимо авторизоваться
-
- 10 Ответы
- 11482 Просмотры
-
Последнее сообщение Иваныч
-
- 1 Ответы
- 7403 Просмотры
-
Последнее сообщение Иваныч
-
- 0 Ответы
- 337 Просмотры
-
Последнее сообщение adrey3824
-
- 0 Ответы
- 543 Просмотры
-
Последнее сообщение Павел 11
-
- 2 Ответы
- 192 Просмотры
-
Последнее сообщение Тягач
Tadano truck crane: service manuals, operators manuals, faults, error codes list in PDF, repair manuals free download.
|
Title |
File Size |
Download link |
|
Tadano AML-C (Load Moment Indicator) Service Manual.pdf |
5.4Mb |
Download |
|
Tadano ATF 220G-5 — Operating, Service and Maintenance Manual.pdf |
30.1Mb |
Download |
|
Tadano Faun Multimedia Service Repair Manual.exe |
17.6Mb |
Download |
|
Tadano Gr-700EX Operators Maintenance Manual.pdf |
21.7Mb |
Download |
|
Tadano GR-700EX-1, GR-700EXL-1 Service Manual.pdf |
22.4Mb |
Download |
|
Tadano GT-550E-2 Operators Maintenance Manual.pdf |
5.2Mb |
Download |
|
Tadano GT-550E-2 Truck Crane Operation and Service Manual.pdf |
19.5Mb |
Download |
|
Tadano MKAT-40 Service & Repair Manual.pdf |
12.8Mb |
Download |
|
Tadano R561-Z101 Service Manual.pdf |
10.4Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual — Part 2.pdf |
9.9Mb |
Download |
|
Tadano TR-160M-3 Rough Terrain Crane — Operation and Maintenance Manual.pdf |
9.9Mb |
Download |
|
Tadano TR-280XL, TR-200M-4, TR-300XL, TR-250M-4, TR-350XL, TR-350M-1, TR-450XL, TR-500M-1, TR-600XL Service Manual (Multiplex data |
4.3Mb |
Download |
|
Tadano TR250M — Steps to Retrive the Program I.D. & Data I.D. Number.pdf |
565.1kb |
Download |
|
Tadano TR250M-3 — Parts Catalog.pdf |
159.9Mb |
Download |
|
Title |
File Size |
Download link |
|
Tadano AT-141 Error codes (faults).pdf |
404.5kb |
Download |
|
Tadano AT-145 Error codes (faults).pdf |
661.5kb |
Download |
|
Tadano AT-180 Error codes (faults).pdf |
853.2kb |
Download |
|
Tadano AT-250TG Fault codes list Part 2.jpg |
172.1kb |
Download |
|
Tadano AT-250TG Fault codes list.jpg |
204.7kb |
Download |
|
TADANO Cranes Fault Codes list.pdf |
136.9kb |
Download |
|
Tadano GR-300E-1, GR-300E-2, GR-500E-2, GR-550E-1, GR-600E-2, GR-700E-1, GR-750-2, GR-800E-2 fault codes list.pdf |
121.5kb |
Download |
|
Tadano TR-100M Error codes (faults).pdf — See also: Tadano TR-100M Error Codes list |
441.9kb |
Download |
|
Title |
File Size |
Download link |
|
ATF 130G-5.pdf |
5Mb |
Download |
|
ATF 50G-3 Bluetec.pdf |
4.9Mb |
Download |
|
ATF 90G 4(Metric).pdf |
16Mb |
Download |
|
ATF-1500XL.pdf |
3.9Mb |
Download |
|
ATF-220G-5(2).pdf |
7.3Mb |
Download |
|
GR-1000XL.pdf |
386.9kb |
Download |
|
GR-1100EX.pdf |
1.1Mb |
Download |
|
GR-1200XL.pdf |
720.7kb |
Download |
|
GR-130EX.pdf |
426.1kb |
Download |
|
GR-1450EX.pdf |
1021kb |
Download |
|
GR-1600XL.pdf |
438.3kb |
Download |
|
GR-300EX.pdf |
321.8kb |
Download |
|
GR-500E-2-00102_EX-02.pdf |
817.8kb |
Download |
|
GR-500EX.pdf |
1.1Mb |
Download |
|
GR-500EXL (Left-hand drive).pdf |
1.8Mb |
Download |
|
GR-500EXL (Right-hand drive).pdf |
2.1Mb |
Download |
|
GR-500EXS.pdf |
1.1Mb |
Download |
|
GR-500XL.pdf |
364.9kb |
Download |
|
GR-600EX.pdf |
775.5kb |
Download |
|
GR-700E-1-00211_EU-32.pdf |
372.6kb |
Download |
|
GR-750XL.pdf |
363.6kb |
Download |
|
GR-800EX.pdf |
659.6kb |
Download |
|
TG500E-3 50T Load Chart.pdf |
919.4kb |
Download |
|
TR150 XL-4.pdf |
768kb |
Download |
|
TR-160M.pdf |
1.3Mb |
Download |
|
TR-200M-5-00101.pdf |
933.3kb |
Download |
|
TR-300EX.pdf |
341.7kb |
Download |
Tadano Faun Group — a group of engineering companies managed by Tadano Ltd.
The head office is in Japan. The main production sites are located in Japan and Germany.
Tadano Ltd. was founded on August 24, 1948. It is considered one of the largest manufacturers of lifting equipment and machinery.
In 1955, the company introduced the first Japanese mobile crane with a lifting capacity of 2 tons, which received the OC-2 index.
1960 Started the export of cranes in Indonesia.
1970 The TR-150 off-road crane with a lifting capacity of 15 tons appears in the Tadano product line.
1973 Tadano International (Europe), the first overseas branch was opened in Holland.
1990 Production of the crane TG-3600M with a maximum lifting capacity of 360 tons.
In the same year, Tadano Ltd. acquires the German company Faun AG. Faun AG has been leading its history since 1845 and specialized in the construction of truck cranes.
1991 Founded Tadano Faun GmbH.
1996 The certificate of international quality ICO 9001 was obtained. In the same year, the production of cranes of various types exceeded 300 thousand units.
1998. The Tadano AR-5500M truck crane was presented — the most powerful of the Japanese-made machines, with a payload of more than 550 tons.
The company specializes in the manufacture of truck cranes, crawler cranes with a telescopic boom, boring crane machines, off-road cranes, loader cranes, car lifts, lifting
platforms, mast lifts. Products are exported to 120 countries.
GR-300E-1, GR-300E-2, GR-500E-2, GR-550E-1, GR-600E-2, GR-700E-1, GR-750-2, GR-800E-2
01 Failure in the main speed sensor. 1.
Gears in transmission are not shifted with the gearshift leaver in «D». 2.
02 Failure in the sub‐speed sensor.
Downshift not possible
03 Failure in main speed sensor (when gearshift is in «N»)
04 Failure in outrigger data (FL)
05 Failure in outrigger data (FR)
06 Failure in outrigger data (RL)
07 Failure in outrigger data (RR)
08 Abnormal torque converter pressure data
09 Abnormal air pressure data
10 Failure in accelerator sonsor 1 data
11 Failure in accelerator sensor 2 data
12 Failure in idle volume data
13 Failure in the upper A/D conversion
15 Upper unit RAM check error
18 Upper unit ROM check error
24 Failure in the transmission input signal combination (Actual transmission and gearshift lever position are not matched).
25 Failure in the transmission input signal.
(Actual transmission and gearshift lever position are not matched).
27 Failure in steering more input signal combination
30 Input value from main speed sensor is unusually high. 1. Speedometer indicates abnormally high speed. 2.
Over speed warning buzzer sounds continuously.
31 Interrupted communication from lower to upper unit
32 Faulty communication from lower to upper unit
33 Interrupted communication from AML to upper unit
34 Failure in RAM for main speed data
35 Faulty communication from AML to upper unit
38 Interrupted communication from meter controller to upper unit
39 Faulty communication from meter controller to upper unit
3A Short circuit dtected by the upper unit, occurring in the communication cable from upper unit to lower unit or from the lower unit to upper unit
48 ECU failure malfunction (it is not possible to run) DIAG 1 (red) in lower unit relay box lights
49 ECU warning malfunction (it is possible to run) DIAG 2 (amber) in lower unit relay box lights
Lower unit errors
16 Lower unit RAM check error
17 Failure in the lower A/D conversion
19 Lower unt ROM check error
28 Interrupted communication from STME to lower unit
29 Faulty communication from STM‐E to lower unit
36 Interrupted communication from upper to lower unit
37 Faulty communication from upper to lower unit
61 Failure in lower unit output power supply 1
62 Failure in lower unit output power supply 2
63 Failure in lower unit output power supply 3
64 Failure in lower unit output power supply 4
65 Failure in lower unit output power supply 5
66 Failure in lower unit output power supply 6
67 Failure in lower unit output power supply 7
68 Failure in lower unit output power supply 8
69 Failure in lower unit output power supply 9
70 Failure in lower unit output power supply 10
71 Failure in lower unit output power supply 11
72 Failure in lower unit output power supply 12
73 Failure in lower unit output power supply 13
74 Failure in lower unit output power supply 14
75 Failure in lower unit output power supply 15
76 Failure in lower unit output power supply 16
80 Monitored lower unit output data is unstable
90 Faulty RY1 output Monitored data ON while output data is OFF
91 Faulty RY2 output Monitored data ON while output data is OFF
92 Faulty RY3 output Monitored data ON while output data is OFF
93 Faulty RY4 output Monitored data ON while output data is OFF
94 Faulty RY5 output Monitored data ON while output data is OFF
95 Faulty RY6 output Monitored data ON while output data is OFF
96 Faulty RY7 output Monitored data ON while output data is OFF
97 Faulty RY8 output Monitored data ON while output data is OFF
98 Faulty RY1 output Monitored data OFF while output data is ON
99 Faulty RY2 output Monitored data OFF while output data is ON
9A Faulty RY3 output Monitored data OFF while output data is ON
9b Faulty RY4 output Monitored data OFF while output data is ON
9C Faulty RY5 output Monitored data OFF while output data is ON
9d Faulty RY6 output Monitored data OFF while output data is ON
9E Faulty RY7 output Monitored data OFF while output data is ON
9F Faulty RY8 output Monitored data OFF while output data is ON
A0 Faulty RY9 output Monitored data ON while output data is OFF
A1 Faulty RY10 output Monitored data ON while output data is OFF
A2 Faulty RY11 output Monitored data ON while output data is OFF
A3 Faulty RY12 output Monitored data ON while output data is OFF
A4 Faulty RY13 output Monitored data ON while output data is OFF
A5 Faulty RY14 output Monitored data ON while output data is OFF
A6 Faulty RY15 output Monitored data ON while output data is OFF
A7 Faulty RY16 output Monitored data ON while output data is OFF
A8 Faulty RY9 output Monitored data OFF while output data is ON
Перечень всех кодов неисправности — смотри в